| 3755816 | 141058 | None | code01 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8661.0 | 8661.0 | 16.31 | False | None | None | False | None | False | 141260.91 | 0 |
| 3755817 | 141058 | None | code02 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Sqm | 1060.0 | 1060.0 | 7.23 | False | None | None | False | None | False | 7663.8 | 0 |
| 3755818 | 141058 | None | code03 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 design mix 20 mm nominal size(The cost of steel reinforcement & formwork to be paid separately) & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 6323.0 | 6323.0 | 0.79 | False | None | None | False | None | False | 4995.17 | 0 |
| 3755819 | 141058 | None | code04 | Add Centring Charges for Lintel & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 3793.0 | 3793.0 | 0.79 | False | None | None | False | None | False | 2996.47 | 0 |
| 3755820 | 141058 | None | code05 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm and down size graded crushed coarseaggregates & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 6843.0 | 6843.0 | 8.72 | False | None | None | False | None | False | 59670.96 | 0 |
| 3755821 | 141058 | None | code06 | Add Centring Charges for Beams & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 3421.5 | 3421.5 | 8.72 | False | None | None | False | None | False | 29835.48 | 0 |
| 3755822 | 141058 | None | code07 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specificationBuildings& with all lead and lift. and as per direction of the Engineer in charge of work. | t | 89457.0 | 89457.0 | 0.91 | False | None | None | False | None | False | 81405.87 | 0 |
| 3755823 | 141058 | None | code08 | Providing Mathi / Nandi wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 122399.0 | 122399.0 | 0.22 | False | None | None | False | None | False | 26927.78 | 0 |
| 3755824 | 141058 | None | code09 | Repairing door and window frames with available wood to the required size. & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 686.0 | 686.0 | 5.04 | False | None | None | False | None | False | 3457.44 | 0 |
| 3755825 | 141058 | None | code10 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 5074.0 | 5074.0 | 5.04 | False | None | None | False | None | False | 25572.96 | 0 |
| 3755826 | 141058 | None | code11 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding & with all lead and lift. and as per direction of the Engineer in charge of work. | Kg | 168.0 | 168.0 | 259.2 | False | None | None | False | None | False | 43545.6 | 0 |
| 3755827 | 141058 | None | code12 | Providing and fixing 12.5mm to 25 mm expanded metal work of 14 gauge with Mathi or Nandi wood patties of 50 mm x 12 mm size, including two coats approved paint etc., complete. (Including cost of screws). with weld mesh 75 mm X 25 mm 6G X 10G & with all lead and lift. and as per direction of the Engineer in charge of work. | Kg | 1483.0 | 1483.0 | 6.48 | False | None | None | False | None | False | 9609.84 | 0 |
| 3755828 | 141058 | None | code13 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 312.0 | 312.0 | 98.49 | False | None | None | False | None | False | 30728.88 | 0 |
| 3755829 | 141058 | None | code14 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 5074.0 | 5074.0 | 6.84 | False | None | None | False | None | False | 34706.16 | 0 |
| 3755830 | 141058 | None | code15 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Kg | 4345.0 | 4345.0 | 6.48 | False | None | None | False | None | False | 28155.6 | 0 |
| 3755831 | 141058 | None | code16 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 295.0 | 295.0 | 89.97 | False | None | None | False | None | False | 26541.15 | 0 |
| 3755832 | 141058 | None | code17 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in charge | Sqm | 323.0 | 323.0 | 24.86 | False | None | None | False | None | False | 8029.78 | 0 |
| 3755833 | 141058 | None | code18 | KSRB15-7 : Providing lime rendering for plastering to wall and ceiling, including cost of materials, labour, curing complete as per specifications. & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 32.0 | 32.0 | 114.83 | False | None | None | False | None | False | 3674.56 | 0 |
| 3755834 | 141058 | None | code19 | KSRB 2.10 : Providing sand cement bed with 5% cement with all leads for all materials and lift of 1.5 m. machine mixed, laid in layers of 15cms. thick and well compacted for foundation, including curing cost of materials labour and HOM complete as per specifications. specification. & with all lead and lift. and as per direction of the Engineer in charge of work. | Cum | 2998.0 | 2998.0 | 1.86 | False | None | None | False | None | False | 5576.28 | 0 |
| 3755835 | 141058 | None | code20 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 2395.0 | 2395.0 | 30.52 | False | None | None | False | None | False | 73095.4 | 0 |
| 3755836 | 141058 | None | code21 | KSRB 8.6-6 : Providing and fixing on wall surface 2.5kg / sq.cm H.D.P.E. rain down water pipes 110mm outer dia approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, curing complete as per specifications. & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 431.0 | 431.0 | 24.0 | False | None | None | False | None | False | 10344.0 | 0 |
| 3755837 | 141058 | None | code22 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 53.0 | 53.0 | 267.09 | False | None | None | False | None | False | 14155.77 | 0 |
| 3755838 | 141058 | None | code23 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 89.0 | 89.0 | 267.09 | False | None | None | False | None | False | 23771.01 | 0 |
| 3755839 | 141058 | None | code24 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 137.0 | 137.0 | 114.83 | False | None | None | False | None | False | 15731.71 | 0 |
| 3755840 | 141058 | None | code25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 115.0 | 115.0 | 15.39 | False | None | None | False | None | False | 1769.85 | 0 |
| 3755841 | 141058 | None | code26 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 354.0 | 354.0 | 46.41 | False | None | None | False | None | False | 16429.14 | 0 |
| 3755842 | 141058 | None | code27 | Providing two coats of water proof cement painting with approved colour and shade over one coatof primer including scrapping the surface with wire brushes etc. before removal of scaffolding fornew RCC over head tanks and cleaning of paint stains wherever necessary with a+B23ll lead and lifts etc complete for: Tanks staging above 6 m and upto 9 m. | Sqm | 153.0 | 153.0 | 46.41 | False | None | None | False | None | False | 7100.73 | 0 |
| 3755843 | 141058 | None | code28 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 4345.0 | 4345.0 | 6.48 | False | None | None | False | None | False | 28155.6 | 0 |
| 3755844 | 141058 | None | code29 | Providing and fixing 12.5mm to 25 mm expanded metal work of 14 gauge with Mathi or Nandi wood patties of 50 mm x 12 mm size, including two coats approved paint etc., complete. (Including cost of screws). with weld mesh 75 mm X 25 mm 6G X 10G. & with all lead and lift. and as per direction of the Engineer in charge of work. | Sqm | 1483.0 | 1483.0 | 6.48 | False | None | None | False | None | False | 9609.84 | 0 |
| 3755845 | 141058 | None | code30 | Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A Short point upto 3Mtr from tapping point to out let via switch box & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 276.0 | 276.0 | 5.0 | False | None | None | False | None | False | 1380.0 | 0 |
| 3755846 | 141058 | None | code31 | Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP AMedium point above 3Mtr upto 6Mtr from tapping point to out let via switch box & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 386.0 | 386.0 | 3.0 | False | None | None | False | None | False | 1158.0 | 0 |
| 3755847 | 141058 | None | code32 | Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 567.0 | 567.0 | 4.0 | False | None | None | False | None | False | 2268.0 | 0 |
| 3755848 | 141058 | None | code33 | Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 143.0 | 143.0 | 3.0 | False | None | None | False | None | False | 429.0 | 0 |
| 3755849 | 141058 | None | code34 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 250.0 | 250.0 | 2.0 | False | None | None | False | None | False | 500.0 | 0 |
| 3755850 | 141058 | None | code35 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.2.5 sqmm & with all lead and lift. and as per direction of the Engineer in charge of work. | Mtr | 40.0 | 40.0 | 120.0 | False | None | None | False | None | False | 4800.0 | 0 |
| 3755851 | 141058 | None | code36 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.4 sqmm & with all lead and lift. and as per direction of the Engineer in charge of work. | Mtr | 59.0 | 59.0 | 60.0 | False | None | None | False | None | False | 3540.0 | 0 |
| 3755852 | 141058 | None | code37 | Supply and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws. Bolts nuts etc.., complete on the existing metal/ PVC box 1 To 3 Module & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 152.0 | 152.0 | 2.0 | False | None | None | False | None | False | 304.0 | 0 |
| 3755853 | 141058 | None | code38 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8 Way & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 250.0 | 250.0 | 1.0 | False | None | None | False | None | False | 250.0 | 0 |
| 3755854 | 141058 | None | code39 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 119.0 | 119.0 | 6.0 | False | None | None | False | None | False | 714.0 | 0 |
| 3755855 | 141058 | None | code40 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 56" Sweep (1400mm) (P-78,It-9.3-1 of PWD Electrical S.R. of 2022-23) | No | 2170.0 | 2170.0 | 2.0 | False | None | None | False | None | False | 4340.0 | 0 |
| 3755856 | 141058 | None | code41 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 162.0 | 162.0 | 2.0 | False | None | None | False | None | False | 324.0 | 0 |
| 3755857 | 141058 | None | code42 | Supplying & fixing of modular switch/ socket / stepped electronic fan regular / dimmer / telephone socket etc on existing modular switch plate as per IS 3854 and 1293 1000-1200 Watts Dimmer | No | 550.0 | 550.0 | 2.0 | False | None | None | False | None | False | 1100.0 | 0 |
| 3755858 | 141058 | None | code43 | Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box.Group 'A' & with all lead and lift. and as per direction of the Engineer in charge of work. | No | 747.0 | 747.0 | 1.0 | False | None | None | False | None | False | 747.0 | 0 |
| 3755859 | 141058 | None | code44 | Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI / GI or any other pipe using required size of reducer, wiring using suitable wires. & with all lead and lift. and as per direction of the Engineer in charge of work. | Mtr | 166.0 | 166.0 | 6.0 | False | None | None | False | None | False | 996.0 | 0 |
| 3755860 | 141058 | None | code45 | Supply of menage 87X30X12 inch 6 feet Shelf Metal Boxes Angle Rock (Quatation Rate)& with all lead and lift. and as per direction of the Engineer in charge of work. | No | 4720.0 | 4720.0 | 10.0 | False | None | None | False | None | False | 47200.0 | 0 |