1723461182000 | 0 | None | None | Buildings | Construction of Shed No 2 to Vermi Compost at karanji nature park | 2749888.81 | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
---|
3758947 | 141264 | None | 001 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring,strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. 1.5.1 In ordinary/soft rock without blasting upto 1.5 m depth (PWD, CSR, 2023-24, Page No. 6, Item No. 1.5.1) | Cum | 313.95 | 313.95 | 13.82 | False | None | None | False | None | False | 4338.789 | 0 | 3758948 | 141264 | None | 002 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm hickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)2.1.2 Mix 1:4:8 (M5) Using 40 mm nominal size graded crushed coarse aggregates(PWD, CSR, 2023-24,Page No. 15, Item No. 2.1.2)
| Cum | 5947.2 | 5947.2 | 39.67 | False | None | None | False | None | False | 235925.424 | 0 | 3758949 | 141264 | None | 003 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (PWD, CSR, 2023-24,Page No. 15, Item No. 2.1.2) | Cum | 6601.35 | 6601.35 | 54.34 | False | None | None | False | None | False | 358717.359 | 0 | 3758950 | 141264 | None | 004 | Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings (PWD, CSR, 20232-24, Page No. 18, Item No.2.11 a)" | t | 93929.85 | 93929.85 | 4.9 | False | None | None | False | None | False | 460256.265 | 0 | 3758951 | 141264 | None | 005 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)2.1.6 Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24,Page No. 15, Item No. 2.1.6) | Cum | 6555.15 | 6555.15 | 71.59 | False | None | None | False | None | False | 469283.1885 | 0 | 3758952 | 141264 | None | 006 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery
complete as per specifications and as per directions of the Engineer-in Charge
(PWD, CSR, 2023-24,Page No. 84, Item No. 11.25.2) | Sqm | 142.8 | 142.8 | 4747.08 | False | None | None | False | None | False | 677883.024 | 0 | 3758953 | 141264 | None | 007 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24, Page No. 41, Item No. 8.2.2)
| Cum | 292.95 | 292.95 | 396.75 | False | None | None | False | None | False | 116227.9125 | 0 | 3758954 | 141264 | None | 008 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(PWD, CSR, 2023-24,Page No.9, Item No. 5.4) | Cum | 6708.45 | 6708.45 | 5.41 | False | None | None | False | None | False | 36292.7145 | 0 | 3758955 | 141264 | None | 009 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.2 Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (PWD, CSR, 2023-24,Page No. 15, Item No. 2.1.2) | Cum | 5947.2 | 5947.2 | 3.44 | False | None | None | False | None | False | 20458.368 | 0 | 3758956 | 141264 | None | 010 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24,Page No. 44, Item No. 8.19.1)
| Sqm | 267.75 | 267.75 | 44.24 | False | None | None | False | None | False | 11845.26 | 0 | 3758957 | 141264 | None | 011 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever Required.(PWD, CSR, 2023-24, Page No. 26, Item No. 7.38)
| Sqm | 596.4 | 596.4 | 532.0 | False | None | None | False | None | False | 317284.8 | 0 | 3758958 | 141264 | None | 012 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete. Ridges plain (500 - 600mm)(PWD, CSR, 2023-24, Page No. 26, Item No. 7.39.1) | m | 473.55 | 473.55 | 38.0 | False | None | None | False | None | False | 17994.9 | 0 | 3758959 | 141264 | None | 013 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD, CSR, 2023-24,Page No. 48, Item No. 8.40) | Sqm | 120.75 | 120.75 | 193.63 | False | None | None | False | None | False | 23380.8225 | 0 |
|