| 3744134 | 139857 | None | Item-01 | New Toilet Block Femle : EARTHWORK FOR LOWERING & LEVELLING :- Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work | Cum | 99.75 | 99.75 | 7.93 | False | None | None | False | None | False | 791.0175 | 0 |
| 3744135 | 139857 | None | Item-02 | EARTHWORK EXCAVATION:- Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work | Cum | 107.1 | 107.1 | 53.69 | False | None | None | False | None | False | 5750.199 | 0 |
| 3744136 | 139857 | None | Item-03 | EARTH FILLING AVAILABLE EXCAVATED EARTH:-Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 16.11 | False | None | None | False | None | False | 4499.523 | 0 |
| 3744137 | 139857 | None | Item-04 | EARTH FILLING :-Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. | Cum | 474.0 | 474.0 | 23.0 | False | None | None | False | None | False | 10902.0 | 0 |
| 3744138 | 139857 | None | Item-05 | P/L P. C.C. BED M10:-Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 18.2 | False | None | None | False | None | False | 118806.87 | 0 |
| 3744139 | 139857 | None | Item-06 | RCC WORKS M20:- Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Centering and shuttering | Cum | 7085.23 | 7085.23 | 6.08 | False | None | None | False | None | False | 43078.1984 | 0 |
| 3744140 | 139857 | None | Item-07 | RCC WORKS M25 COLUMN UPTO PLINTH BOTTOM Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Centering and shuttering | Cum | 11152.68 | 11152.68 | 0.62 | False | None | None | False | None | False | 6914.6616 | 0 |
| 3744141 | 139857 | None | Item-08 | RCC WORKS M20: -Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH BEAM RCC WORKS M20 BEAMS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding | Cum | 10622.64 | 10622.64 | 3.93 | False | None | None | False | None | False | 41746.9752 | 0 |
| 3744142 | 139857 | None | Item-09 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Centering and shuttering COLUMN RCC WORKS M25 Above Plinth Beam to Bottom of Roof Slab | Cum | 11286.56 | 11286.56 | 1.63 | False | None | None | False | None | False | 18397.0928 | 0 |
| 3744143 | 139857 | None | Item-10 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Centering and shuttering COLUMN RCC WORKS M25 LINTEL BEAM RCC WORKS M25 | Cum | 10622.64 | 10622.64 | 6.19 | False | None | None | False | None | False | 65754.1416 | 0 |
| 3744144 | 139857 | None | Item-11 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Centering and shuttering ROOF BEAM RCC WORKS M25 | Cum | 10622.64 | 10622.64 | 1.97 | False | None | None | False | None | False | 20926.6008 | 0 |
| 3744145 | 139857 | None | Item-12 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Centering and shuttering ROOF SLAB | Cum | 9958.73 | 9958.73 | 6.55 | False | None | None | False | None | False | 65229.6815 | 0 |
| 3744146 | 139857 | None | Item-13 | MASONRY WORKS UCRS STONE MASONRY(FOUNDATION): Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) UCRS upto Plinth Beam Bottom | Cum | 5891.55 | 5891.55 | 15.65 | False | None | None | False | None | False | 92202.7575 | 0 |
| 3744147 | 139857 | None | Item-14 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Toilet Block Outer Walls | Cum | 8367.45 | 8367.45 | 17.29 | False | None | None | False | None | False | 144673.2105 | 0 |
| 3744148 | 139857 | None | Item-15 | HALF MASONRY WORKS (PARTITION WALL):-Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Toilet Block Internal walls | Sqm | 1117.05 | 1117.05 | 45.65 | False | None | None | False | None | False | 50993.3325 | 0 |
| 3744149 | 139857 | None | Item-16 | PLASTERING WORKS CEILING PLASTER:- Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 339.15 | 339.15 | 43.65 | False | None | None | False | None | False | 14803.8975 | 0 |
| 3744150 | 139857 | None | Item-17 | PLASTERING INSIDE :- Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 404.25 | 404.25 | 169.65 | False | None | None | False | None | False | 68581.0125 | 0 |
| 3744151 | 139857 | None | Item-18 | OUTSIDE PLASTERING :-Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 404.25 | 404.25 | 126.69 | False | None | None | False | None | False | 51214.4325 | 0 |
| 3744152 | 139857 | None | Item-19 | WOOD WORK , DOOR FRAMES : Providing sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 103755.75 | 103755.75 | 0.05 | False | None | None | False | None | False | 5187.7875 | 0 |
| 3744153 | 139857 | None | Item-20 | WPC DOOR SHUTTER :Providing & fixing factory made 100% carpenry friendly ready to use single soild plain WPC flush shutter of 35mm thk. Which is anti termite & having high water absorption propoerty | Sqm | 3816.75 | 3816.75 | 2.52 | False | None | None | False | None | False | 9618.21 | 0 |
| 3744154 | 139857 | None | Item-21 | FIXING OF DOOR FRAMES: -Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications | Nos | 1066.8 | 1066.8 | 1.0 | False | None | None | False | None | False | 1066.8 | 0 |
| 3744155 | 139857 | None | Item-22 | WPC DOOR FRAMES Providing & fixing factory made single excuted WPC solid door/window frame of size 62 x 125 Page No.111 Item no. 12.93.2 KPWD. Volumn -2 DSR 2023-24 | Mtr | 802.2 | 802.2 | 34.5 | False | None | None | False | None | False | 27675.9 | 0 |
| 3744156 | 139857 | None | Item-23 | WPC DOOR SHUTTER :- Providing & fixing factory made 100% carpenry friendly ready to use single soild plain WPC flush shutter of 35mm thk. Which is anti termite & having high water absorption propoerty | Sqm | 3364.2 | 3364.2 | 9.77 | False | None | None | False | None | False | 32868.234 | 0 |
| 3744157 | 139857 | None | Item-24 | STEEL GLAZED VENTILATORS:- Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). | Kg | 155.4 | 155.4 | 157.5 | False | None | None | False | None | False | 24475.5 | 0 |
| 3744158 | 139857 | None | Item-25 | GLASS TO VENTILATORS:- Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 957.6 | 957.6 | 7.5 | False | None | None | False | None | False | 7182.0 | 0 |
| 3744159 | 139857 | None | Item-26 | ANTISKID TILES :-Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile | Sqm | 1308.3 | 1308.3 | 40.42 | False | None | None | False | None | False | 52881.486 | 0 |
| 3744160 | 139857 | None | Item-27 | TILES CLADDING:- Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile coarse sand) with Acid and alkali resistant tile | Sqm | 1323.0 | 1323.0 | 63.53 | False | None | None | False | None | False | 84050.19 | 0 |
| 3744161 | 139857 | None | Item-28 | FINISHING WORK PAINTING TO STEEL PRIMER :-Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 52.5 | 52.5 | 15.0 | False | None | None | False | None | False | 787.5 | 0 |
| 3744162 | 139857 | None | Item-29 | PAINTING TO STEEL ENAMEL PAINT:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 145.95 | 145.95 | 15.0 | False | None | None | False | None | False | 2189.25 | 0 |
| 3744163 | 139857 | None | Item-30 | INSIDE PAINTING:Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer'sspecification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge. Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 139.65 | 139.65 | 106.12 | False | None | None | False | None | False | 14819.658 | 0 |
| 3744164 | 139857 | None | Item-31 | CEILING PAINT:- Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer'sspecification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge. Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 139.65 | 139.65 | 43.65 | False | None | None | False | None | False | 6095.7225 | 0 |
| 3744165 | 139857 | None | Item-32 | OUTSIDE PAINTING:- Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 186.9 | 186.9 | 126.69 | False | None | None | False | None | False | 23678.361 | 0 |
| 3744166 | 139857 | None | Item-33 | T.M.T STEEL:- Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Tonne | 93929.85 | 93929.85 | 3.15 | False | None | None | False | None | False | 295879.0275 | 0 |
| 3744167 | 139857 | None | Item-34 | WATER PROOF TREATMENT:- Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412.The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. | Sqm | 857.85 | 857.85 | 43.65 | False | None | None | False | None | False | 37445.1525 | 0 |
| 3744168 | 139857 | None | Item-35 | WATER SUPPLY and sanitary for Gound floor: WORKS:- Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. Internal work, Conceled work, including cutting chases & making good the wall etc 15mm dia pipe in GF WC | Mtr | 324.45 | 324.45 | 30.0 | False | None | None | False | None | False | 9733.5 | 0 |
| 3744169 | 139857 | None | Item-36 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes 25 MM conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. including cutting chases & making good the wall etc. EXPOSED ON WALL 25 mm dia pipe from borewell to terrace tank | Mtr | 333.9 | 333.9 | 50.0 | False | None | None | False | None | False | 16695.0 | 0 |
| 3744170 | 139857 | None | Item-37 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes 32 MM conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. including cutting chases & making good the wall etc. EXPOSED ON WALL 25mm dia pipe from terrace tank TO GF | Mtr | 333.9 | 333.9 | 10.0 | False | None | None | False | None | False | 3339.0 | 0 |
| 3744171 | 139857 | None | Item-38 | P/F PTMT BIBCOCK:- Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g | Nos | 165.9 | 165.9 | 14.0 | False | None | None | False | None | False | 2322.6 | 0 |
| 3744172 | 139857 | None | Item-39 | P/F PTMT STOPCOCK CONCEALED:- Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms | Nos | 211.05 | 211.05 | 7.0 | False | None | None | False | None | False | 1477.35 | 0 |
| 3744173 | 139857 | None | Item-40 | P/F BRASS BALL VALVE :- Providing and fixing Brass full way valve gate with C.I. wheel of Approved quality (screwed end) : INLET & OUTLET POINTS | Nos | 576.45 | 576.45 | 4.0 | False | None | None | False | None | False | 2305.8 | 0 |
| 3744174 | 139857 | None | Item-41 | P/F WASH BASIN:- Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | Unit | 2410.8 | 2410.8 | 3.0 | False | None | None | False | None | False | 7232.4 | 0 |
| 3744175 | 139857 | None | Item-42 | PTMT STOP COCK :- 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms | Nos | 329.7 | 329.7 | 3.0 | False | None | None | False | None | False | 989.1 | 0 |
| 3744176 | 139857 | None | Item-43 | PVC CONNECTION PIPE:- Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length Wash Basins Brass Unions | Unit | 95.55 | 95.55 | 15.0 | False | None | None | False | None | False | 1433.25 | 0 |
| 3744177 | 139857 | None | Item-44 | FLEXIBLE TUBE ( WATER FOSSET):- Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 285.6 | 285.6 | 6.0 | False | None | None | False | None | False | 1713.6 | 0 |
| 3744178 | 139857 | None | Item-45 | P/F MIRROR WITH FRAME :- Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Unit | 1281.0 | 1281.0 | 3.0 | False | None | None | False | None | False | 3843.0 | 0 |
| 3744179 | 139857 | None | Item-46 | SANITARY WORK: SQUATTING PLATE INDIAN TYPE: Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Pan | 5128.2 | 5128.2 | 4.0 | False | None | None | False | None | False | 20512.8 | 0 |
| 3744180 | 139857 | None | Item-47 | WATER CLOSET EUROPEAN TYPE:-Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : | Pan | 6275.85 | 6275.85 | 2.0 | False | None | None | False | None | False | 12551.7 | 0 |
| 3744181 | 139857 | None | Item-48 | WASTE PIPE:- Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia | Each | 96.6 | 96.6 | 3.0 | False | None | None | False | None | False | 289.8 | 0 |
| 3744182 | 139857 | None | Item-49 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushin cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two squatting plates with 5 litre P.V.C. automatic flushin cistern | Each | 13590.15 | 13590.15 | 4.0 | False | None | None | False | None | False | 54360.6 | 0 |
| 3744183 | 139857 | None | Item-50 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth For Inspection chamber 0.9x0.9x0.5x9no's | Cum | 313.95 | 313.95 | 75.65 | False | None | None | False | None | False | 23750.3175 | 0 |
| 3744184 | 139857 | None | Item-51 | BRICK MASONRY FOR INSPECTION CHAMBER: Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 3.5 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Inspection Chamber of Size 600 x 600 x 600 mm 0.6*3*.23*9no. | Cum | 8367.45 | 8367.45 | 3.75 | False | None | None | False | None | False | 31377.9375 | 0 |
| 3744185 | 139857 | None | Item-52 | PLASTERING FOR INSPECTION CHAMBER:- Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Inspection Chamber inside & outside (0.6*5 + .83*4)* 9no. | Sqm | 404.25 | 404.25 | 56.88 | False | None | None | False | None | False | 22993.74 | 0 |
| 3744186 | 139857 | None | Item-53 | SLAB OVER INSPECTION CHAMBER:- Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. Inspection Chamber 830MM X 830 MM x 9nos. | Sqm | 974.4 | 974.4 | 6.2 | False | None | None | False | None | False | 6041.28 | 0 |
| 3744187 | 139857 | None | Item-54 | WATER STOAGE TANK:- KSRB 13-11.1 : Providing and placing on terrace,(at all floor levels) polyethylene water storage tank is:12701 marked with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.- WATER TANK 2000 ltr | Ltr | 9.45 | 9.45 | 2000.0 | False | None | None | False | None | False | 18900.0 | 0 |
| 3744188 | 139857 | None | Item-55 | UPVC PIPE:- Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 110mm dia. 110mm dia FROM Urinals/WC rooms | Mtr | 302.4 | 302.4 | 30.0 | False | None | None | False | None | False | 9072.0 | 0 |
| 3744189 | 139857 | None | Item-56 | Stainless Steel Grab Bar Steel Hande Size (48" Inchs) | Rft | 300.0 | 300.0 | 4.0 | False | None | None | False | None | False | 1200.0 | 0 |
| 3744190 | 139857 | None | Item-57 | Electrical Work : -Supplying heavy gauge PVC conduit pipe ...2. mm dia.....25...mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick | Rmtr | 81.0 | 81.0 | 30.0 | False | None | None | False | None | False | 2430.0 | 0 |
| 3744191 | 139857 | None | Item-58 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. up to 50 mm | Rmtr | 29.0 | 29.0 | 10.0 | False | None | None | False | None | False | 290.0 | 0 |
| 3744192 | 139857 | None | Item-59 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete for each outlet. GROUP short point up to 3 mtr from tapping point out let via switch | Each | 269.0 | 269.0 | 4.0 | False | None | None | False | None | False | 1076.0 | 0 |
| 3744193 | 139857 | None | Item-60 | Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch | Each | 379.0 | 379.0 | 5.0 | False | None | None | False | None | False | 1895.0 | 0 |
| 3744194 | 139857 | None | Item-61 | long above 6 mtr up to 10 mtr from tapping point to out let via switch | Each | 555.0 | 555.0 | 1.0 | False | None | None | False | None | False | 555.0 | 0 |
| 3744195 | 139857 | None | Item-62 | Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 6 amps 3/5 way | Each | 147.0 | 147.0 | 1.0 | False | None | None | False | None | False | 147.0 | 0 |
| 3744196 | 139857 | None | Item-63 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 way | Each | 319.0 | 319.0 | 1.0 | False | None | None | False | None | False | 319.0 | 0 |
| 3744197 | 139857 | None | Item-64 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 way | Each | 177.0 | 177.0 | 5.0 | False | None | None | False | None | False | 885.0 | 0 |
| 3744198 | 139857 | None | Item-65 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 module | Each | 175.0 | 175.0 | 5.0 | False | None | None | False | None | False | 875.0 | 0 |
| 3744199 | 139857 | None | Item-66 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 12 module | Each | 344.0 | 344.0 | 1.0 | False | None | None | False | None | False | 344.0 | 0 |
| 3744200 | 139857 | None | Item-67 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 8 Way SP & N | Each | 1492.0 | 1492.0 | 1.0 | False | None | None | False | None | False | 1492.0 | 0 |
| 3744201 | 139857 | None | Item-68 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 amps SP | Each | 415.0 | 415.0 | 3.0 | False | None | None | False | None | False | 1245.0 | 0 |
| 3744202 | 139857 | None | Item-69 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 6-32 A DP | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 |
| 3744203 | 139857 | None | Item-70 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming latest amanment 2.5 sq mm | Rmtr | 42.0 | 42.0 | 30.0 | False | None | None | False | None | False | 1260.0 | 0 |
| 3744204 | 139857 | None | Item-71 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming latest amanment 4. sq mm | Rmtr | 63.0 | 63.0 | 50.0 | False | None | None | False | None | False | 3150.0 | 0 |
| 3744205 | 139857 | None | Item-72 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. | Each | 122.0 | 122.0 | 3.0 | False | None | None | False | None | False | 366.0 | 0 |
| 3744206 | 139857 | None | Item-73 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. 12 sweep (300 mm) | Each | 2969.0 | 2969.0 | 8.0 | False | None | None | False | None | False | 23752.0 | 0 |
| 3744207 | 139857 | None | Item-74 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire. | Each | 492.0 | 492.0 | 8.0 | False | None | None | False | None | False | 3936.0 | 0 |
| 3744208 | 139857 | None | Item-75 | PROVIDING AND FIXING OF TRAP: Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 8 10 mm inlet and 100 mm outlet * Sand cast Iron S&S as per IS: 1729 | Each | 1202.25 | 1202.25 | 3.0 | False | None | None | False | None | False | 3606.75 | 0 |
| 3744209 | 139857 | None | Item-76 | Borewell : -Geophysical investigation :-Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry borewell towords yeild test etc and complete | Each | 5552.4 | 5552.4 | 1.0 | False | None | None | False | None | False | 5552.4 | 0 |
| 3744210 | 139857 | None | Item-77 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete Borewell depth of 0 to 50 m | Mtr | 388.5 | 388.5 | 50.0 | False | None | None | False | None | False | 19425.0 | 0 |
| 3744211 | 139857 | None | Item-78 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete Borewell depth Borewell depth of 50 to 100 m | Mtr | 487.2 | 487.2 | 50.0 | False | None | None | False | None | False | 24360.0 | 0 |
| 3744212 | 139857 | None | Item-79 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete Borewell depth Borewell depth of 100 to 150 m | Mtr | 517.65 | 517.65 | 50.0 | False | None | None | False | None | False | 25882.5 | 0 |
| 3744213 | 139857 | None | Item-80 | SUPPLY & FIXING MS CASE:- Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty | Mtr | 2029.65 | 2029.65 | 18.0 | False | None | None | False | None | False | 36533.7 | 0 |
| 3744214 | 139857 | None | Item-81 | PVC FILTER PIPE:- Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: 10.1.9 PVC pipes 160mm dia., 6 kg/sqcm & class 3 m 618 | Mtr | 648.9 | 648.9 | 150.0 | False | None | None | False | None | False | 97335.0 | 0 |
| 3744215 | 139857 | None | Item-82 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc.
Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : | Mtr | 492.45 | 492.45 | 150.0 | False | None | None | False | None | False | 73867.5 | 0 |
| 3744216 | 139857 | None | Item-83 | SUBMERSIBLE PUMPL -Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00” | Each | 29518.65 | 29518.65 | 1.0 | False | None | None | False | None | False | 29518.65 | 0 |
| 3744217 | 139857 | None | Item-84 | PVC CABLE:- Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5 m2 | Mtr | 89.25 | 89.25 | 175.0 | False | None | None | False | None | False | 15618.75 | 0 |
| 3744218 | 139857 | None | Item-85 | STARTER:- Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter | Each | 10027.5 | 10027.5 | 1.0 | False | None | None | False | None | False | 10027.5 | 0 |
| 3744219 | 139857 | None | Item-86 | Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause | Job | 3937.5 | 3937.5 | 1.0 | False | None | None | False | None | False | 3937.5 | 0 |
| 3744220 | 139857 | None | Item-87 | NON RETURN VALVE:- Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 65 mm | Each | 1627.5 | 1627.5 | 1.0 | False | None | None | False | None | False | 1627.5 | 0 |
| 3744221 | 139857 | None | Item-88 | New Toilet Block Male :-EARTHWORK FOR LOWERING & LEVELLING :- Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work | Cum | 99.75 | 99.75 | 7.93 | False | None | None | False | None | False | 791.0175 | 0 |
| 3744222 | 139857 | None | Item-89 | EARTHWORK EXCAVATION:- Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work | Cum | 107.1 | 107.1 | 53.69 | False | None | None | False | None | False | 5750.199 | 0 |
| 3744223 | 139857 | None | Item-90 | EARTH FILLING AVAILABLE EXCAVATED EARTH:-Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 16.11 | False | None | None | False | None | False | 4499.523 | 0 |
| 3744224 | 139857 | None | Item-91 | EARTH FILLING :-Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. | Cum | 497.7 | 497.7 | 23.0 | False | None | None | False | None | False | 11447.1 | 0 |
| 3744225 | 139857 | None | Item-92 | P/L P. C.C. BED M10:-Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 18.2 | False | None | None | False | None | False | 118806.87 | 0 |
| 3744226 | 139857 | None | Item-93 | RCC WORKS M20:- Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates CENTERING TO FOOTING: -FOOTING CENTERING Appendix I Additionalities for Formwork, Centering & Scaffolding | Cum | 7085.23 | 7085.23 | 6.08 | False | None | None | False | None | False | 43078.1984 | 0 |
| 3744227 | 139857 | None | Item-94 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC WORKS M25 COLUMN UPTO PLINTH BOTTOM Lvl COLUMNS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding Columns Upto Plinth Beam Botoom rcc Qty Sub Structure | Cum | 11152.68 | 11152.68 | 0.62 | False | None | None | False | None | False | 6914.6616 | 0 |
| 3744228 | 139857 | None | Item-95 | RCC WORKS M20: -Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH BEAM RCC WORKS M20 and CENTERING TO PLINTH BEAMS :PLINTH BEAMS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding | Cum | 10622.64 | 10622.64 | 2.87 | False | None | None | False | None | False | 30486.9768 | 0 |
| 3744229 | 139857 | None | Item-96 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMN RCC WORKS M25 Above Plinth Beam to Bottom of Roof Slab COLUMNS CENTERING Appendix I Additionalities for Formwork, Centering Scaffolding Columns Above Plinth Beam to Bottom Roof Slab Qty Super Structure | Cum | 11286.56 | 11286.56 | 1.63 | False | None | None | False | None | False | 18397.0928 | 0 |
| 3744230 | 139857 | None | Item-97 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates LINTEL BEAM RCC WORKS M25 CENTERING TO LINTEL BEAM :BEAMS CENTERING Appendix I Additionalities for Formwork, Centering & Scaffolding | Cum | 10622.64 | 10622.64 | 4.32 | False | None | None | False | None | False | 45889.8048 | 0 |
| 3744231 | 139857 | None | Item-98 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ROOF BEAM RCC WORKS M25 CENTERING TO ROOF BEAMS:- PLINTH BEAMS CENTERING Appendix I Corrigendum-3 Additionalities for Formwork, Centering & Scaffolding | Cum | 10622.64 | 10622.64 | 1.97 | False | None | None | False | None | False | 20926.6008 | 0 |
| 3744232 | 139857 | None | Item-99 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ROOF SLAB CENTERING TO ROOF SLAB:- ROOF SLAB CENTERING Appendix I Additionalities for Formwork, Centering & Scaffolding | Cum | 9958.73 | 9958.73 | 6.55 | False | None | None | False | None | False | 65229.6815 | 0 |
| 3744233 | 139857 | None | Item-100 | MASONRY WORKS UCRS STONE MASONRY(FOUNDATION): Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) UCRS upto Plinth Beam Bottom | Cum | 5891.55 | 5891.55 | 15.65 | False | None | None | False | None | False | 92202.7575 | 0 |
| 3744234 | 139857 | None | Item-101 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Toilet Block Outer Walls | Cum | 8367.45 | 8367.45 | 17.29 | False | None | None | False | None | False | 144673.2105 | 0 |
| 3744235 | 139857 | None | Item-102 | HALF MASONRY WORKS (PARTITION WALL):-Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Toilet Block Internal walls | Sqm | 1117.05 | 1117.05 | 32.69 | False | None | None | False | None | False | 36516.3645 | 0 |
| 3744236 | 139857 | None | Item-103 | PLASTERING WORKS CEILING PLASTER:- Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 339.15 | 339.15 | 43.65 | False | None | None | False | None | False | 14803.8975 | 0 |
| 3744237 | 139857 | None | Item-104 | PLASTERING INSIDE :- Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 404.25 | 404.25 | 140.54 | False | None | None | False | None | False | 56813.295 | 0 |
| 3744238 | 139857 | None | Item-105 | OUTSIDE PLASTERING :-Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 404.25 | 404.25 | 126.69 | False | None | None | False | None | False | 51214.4325 | 0 |
| 3744239 | 139857 | None | Item-106 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 128518.95 | 128518.95 | 0.05 | False | None | None | False | None | False | 6425.9475 | 0 |
| 3744240 | 139857 | None | Item-107 | WPC DOOR SHUTTER :Providing & fixing factory made 100% carpenry friendly ready to use single soild plain WPC flush shutter of 35mm thk. Which is anti termite & having high water absorption propoerty | Sqm | 3816.75 | 3816.75 | 2.52 | False | None | None | False | None | False | 9618.21 | 0 |
| 3744241 | 139857 | None | Item-108 | FIXING OF DOOR FRAMES: -Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications | Nos | 1066.8 | 1066.8 | 1.0 | False | None | None | False | None | False | 1066.8 | 0 |
| 3744242 | 139857 | None | Item-109 | WPC DOOR FRAMES Providing & fixing factory made single excuted WPC solid door/window frame of size 62 x 125 Page No.111 Item no. 12.93.2 KPWD. Volumn -2 DSR 2023-24 | Mtr | 802.2 | 802.2 | 23.1 | False | None | None | False | None | False | 18530.82 | 0 |
| 3744243 | 139857 | None | Item-110 | WPC DOOR SHUTTER :- Providing & fixing factory made 100% carpenry friendly ready to use single soild plain WPC flush shutter of 35mm thk. Which is anti termite & having high water absorption propoerty | Sqm | 3364.2 | 3364.2 | 6.62 | False | None | None | False | None | False | 22271.004 | 0 |
| 3744244 | 139857 | None | Item-111 | STEEL GLAZED VENTILATORS:- Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). | Kg | 155.4 | 155.4 | 157.5 | False | None | None | False | None | False | 24475.5 | 0 |
| 3744245 | 139857 | None | Item-112 | GLASS TO VENTILATORS:- Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 957.6 | 957.6 | 7.5 | False | None | None | False | None | False | 7182.0 | 0 |
| 3744246 | 139857 | None | Item-113 | ANTISKID TILES :-Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile | Sqm | 1308.3 | 1308.3 | 40.95 | False | None | None | False | None | False | 53574.885 | 0 |
| 3744247 | 139857 | None | Item-114 | TILES CLADDING:- Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile coarse sand) with Acid and alkali resistant tile | Sqm | 1323.0 | 1323.0 | 57.75 | False | None | None | False | None | False | 76403.25 | 0 |
| 3744248 | 139857 | None | Item-115 | FINISHING WORK PAINTING TO STEEL PRIMER :-Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 52.5 | 52.5 | 15.0 | False | None | None | False | None | False | 787.5 | 0 |
| 3744249 | 139857 | None | Item-116 | PAINTING TO STEEL ENAMEL PAINT:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 145.95 | 145.95 | 15.0 | False | None | None | False | None | False | 2189.25 | 0 |
| 3744250 | 139857 | None | Item-117 | INSIDE PAINTING:Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer'sspecification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge. Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 139.65 | 139.65 | 82.79 | False | None | None | False | None | False | 11561.6235 | 0 |
| 3744251 | 139857 | None | Item-118 | CEILING PAINT:- Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer'sspecification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and asper directions of Engineer-in-charge. Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 139.65 | 139.65 | 43.65 | False | None | None | False | None | False | 6095.7225 | 0 |
| 3744252 | 139857 | None | Item-119 | OUTSIDE PAINTING:- Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 186.9 | 186.9 | 126.69 | False | None | None | False | None | False | 23678.361 | 0 |
| 3744253 | 139857 | None | Item-120 | T.M.T STEEL:- Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Tonne | 93929.85 | 93929.85 | 2.87 | False | None | None | False | None | False | 269578.6695 | 0 |
| 3744254 | 139857 | None | Item-121 | WATER PROOF TREATMENT:- Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412.The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. | Sqm | 857.85 | 857.85 | 43.65 | False | None | None | False | None | False | 37445.1525 | 0 |
| 3744255 | 139857 | None | Item-122 | GROUND FLOOR : WATER SUPPLY WORKS:- Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. Internal work, Conceled work, including cutting chases & making good the wall etc 15mm dia pipe in GF WC | Mtr | 324.45 | 324.45 | 30.0 | False | None | None | False | None | False | 9733.5 | 0 |
| 3744256 | 139857 | None | Item-123 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes 25 MM conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. including cutting chases & making good the wall etc. EXPOSED ON WALL 25 mm dia pipe from borewell to terrace tank | Mtr | 333.9 | 333.9 | 50.0 | False | None | None | False | None | False | 16695.0 | 0 |
| 3744257 | 139857 | None | Item-124 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes 32 MM conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. including cutting chases & making good the wall etc. EXPOSED ON WALL 25mm dia pipe from terrace tank TO GF | Mtr | 333.9 | 333.9 | 10.0 | False | None | None | False | None | False | 3339.0 | 0 |
| 3744258 | 139857 | None | Item-125 | P/F PTMT BIBCOCK:- Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g | Nos | 165.9 | 165.9 | 14.0 | False | None | None | False | None | False | 2322.6 | 0 |
| 3744259 | 139857 | None | Item-126 | P/F PTMT STOPCOCK CONCEALED:- Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms | Nos | 211.05 | 211.05 | 7.0 | False | None | None | False | None | False | 1477.35 | 0 |
| 3744260 | 139857 | None | Item-127 | P/F BRASS BALL VALVE :- Providing and fixing Brass full way valve gate with C.I. wheel of Approved quality (screwed end) : INLET & OUTLET POINTS | Nos | 576.45 | 576.45 | 4.0 | False | None | None | False | None | False | 2305.8 | 0 |
| 3744261 | 139857 | None | Item-128 | P/F WASH BASIN:- Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | Unit | 2410.8 | 2410.8 | 3.0 | False | None | None | False | None | False | 7232.4 | 0 |
| 3744262 | 139857 | None | Item-129 | PTMT STOP COCK :- 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms | Nos | 329.7 | 329.7 | 3.0 | False | None | None | False | None | False | 989.1 | 0 |
| 3744263 | 139857 | None | Item-130 | PVC CONNECTION PIPE:- Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length Wash Basins Brass Unions | Unit | 95.55 | 95.55 | 15.0 | False | None | None | False | None | False | 1433.25 | 0 |
| 3744264 | 139857 | None | Item-131 | FLEXIBLE TUBE ( WATER FOSSET):- Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 285.6 | 285.6 | 6.0 | False | None | None | False | None | False | 1713.6 | 0 |
| 3744265 | 139857 | None | Item-132 | P/F MIRROR WITH FRAME :- Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Unit | 1281.0 | 1281.0 | 3.0 | False | None | None | False | None | False | 3843.0 | 0 |
| 3744266 | 139857 | None | Item-133 | SANITARY WORK: SQUATTING PLATE INDIAN TYPE: Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Pan | 5128.2 | 5128.2 | 4.0 | False | None | None | False | None | False | 20512.8 | 0 |
| 3744267 | 139857 | None | Item-134 | WATER CLOSET EUROPEAN TYPE:-Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : | Pan | 6275.85 | 6275.85 | 2.0 | False | None | None | False | None | False | 12551.7 | 0 |
| 3744268 | 139857 | None | Item-135 | WASTE PIPE:- Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe32 mm dia | Each | 96.6 | 96.6 | 3.0 | False | None | None | False | None | False | 289.8 | 0 |
| 3744269 | 139857 | None | Item-136 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushin cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two squatting plates with 5 litre P.V.C. automatic flushin cistern | Each | 13590.15 | 13590.15 | 4.0 | False | None | None | False | None | False | 54360.6 | 0 |
| 3744270 | 139857 | None | Item-137 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushin cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | 13590.15 | 13590.15 | 1.0 | False | None | None | False | None | False | 13590.15 | 0 |
| 3744271 | 139857 | None | Item-138 | Providing and fixing granite stone slab with table rubbed, edges roundedand polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. | Sqm | 2928.45 | 2928.45 | 8.1 | False | None | None | False | None | False | 23720.445 | 0 |
| 3744272 | 139857 | None | Item-139 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth For Inspection chamber 0.9x0.9x0.5x9no's | Cum | 313.95 | 313.95 | 75.65 | False | None | None | False | None | False | 23750.3175 | 0 |
| 3744273 | 139857 | None | Item-140 | BRICK MASONRY FOR INSPECTION CHAMBER: Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 3.5 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Inspection Chamber of Size 600 x 600 x 600 mm 0.6*3*.23*9no. | Cum | 8080.8 | 8080.8 | 3.73 | False | None | None | False | None | False | 30141.384 | 0 |
| 3744274 | 139857 | None | Item-141 | PLASTERING FOR INSPECTION CHAMBER:- Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Inspection Chamber inside & outside (0.6*5 + .83*4)* 9no. | Sqm | 404.25 | 404.25 | 56.88 | False | None | None | False | None | False | 22993.74 | 0 |
| 3744275 | 139857 | None | Item-142 | SLAB OVER INSPECTION CHAMBER:- Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. Inspection Chamber 830MM X 830 MM x 9nos. | Sqm | 974.4 | 974.4 | 6.2 | False | None | None | False | None | False | 6041.28 | 0 |
| 3744276 | 139857 | None | Item-143 | WATER STOAGE TANK:- KSRB 13-11.1 : Providing and placing on terrace,(at all floor levels) polyethylene water storage tank is:12701 marked with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.- WATER TANK 2000 ltr | Ltr | 9.45 | 9.45 | 2000.0 | False | None | None | False | None | False | 18900.0 | 0 |
| 3744277 | 139857 | None | Item-144 | UPVC PIPE:- Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 110mm dia. 110mm dia FROM Urinals/WC rooms | Mtr | 302.4 | 302.4 | 30.0 | False | None | None | False | None | False | 9072.0 | 0 |
| 3744278 | 139857 | None | Item-145 | Stainless Steel Grab Bar Steel Hande Size (48" Inchs) | Rft | 300.0 | 300.0 | 4.0 | False | None | None | False | None | False | 1200.0 | 0 |
| 3744279 | 139857 | None | Item-146 | PROVIDING AND FIXING OF TRAP: Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 8 10 mm inlet and 100 mm outlet * Sand cast Iron S&S as per IS: 1729 | Each | 1202.25 | 1202.25 | 4.0 | False | None | None | False | None | False | 4809.0 | 0 |
| 3744280 | 139857 | None | Item-147 | Electrical Work : -Supplying heavy gauge PVC conduit pipe ...2. mm dia.....25...mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick | Rmtr | 81.0 | 81.0 | 30.0 | False | None | None | False | None | False | 2430.0 | 0 |
| 3744281 | 139857 | None | Item-148 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. up to 50 mm | Rmtr | 29.0 | 29.0 | 10.0 | False | None | None | False | None | False | 290.0 | 0 |
| 3744282 | 139857 | None | Item-149 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete for each outlet. GROUP short point up to 3 mtr from tapping point out let via switch | Each | 269.0 | 269.0 | 4.0 | False | None | None | False | None | False | 1076.0 | 0 |
| 3744283 | 139857 | None | Item-150 | Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch | Each | 379.0 | 379.0 | 5.0 | False | None | None | False | None | False | 1895.0 | 0 |
| 3744284 | 139857 | None | Item-151 | long above 6 mtr up to 10 mtr from tapping point to out let via switch | Each | 555.0 | 555.0 | 1.0 | False | None | None | False | None | False | 555.0 | 0 |
| 3744285 | 139857 | None | Item-152 | Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 6 amps 3/5 way | Each | 147.0 | 147.0 | 1.0 | False | None | None | False | None | False | 147.0 | 0 |
| 3744286 | 139857 | None | Item-153 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 way | Each | 319.0 | 319.0 | 1.0 | False | None | None | False | None | False | 319.0 | 0 |
| 3744287 | 139857 | None | Item-154 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 way | Each | 177.0 | 177.0 | 5.0 | False | None | None | False | None | False | 885.0 | 0 |
| 3744288 | 139857 | None | Item-155 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 module | Each | 175.0 | 175.0 | 5.0 | False | None | None | False | None | False | 875.0 | 0 |
| 3744289 | 139857 | None | Item-156 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 12 module | Each | 344.0 | 344.0 | 1.0 | False | None | None | False | None | False | 344.0 | 0 |
| 3744290 | 139857 | None | Item-157 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 8 Way SP & N | Each | 1854.0 | 1854.0 | 1.0 | False | None | None | False | None | False | 1854.0 | 0 |
| 3744291 | 139857 | None | Item-158 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 amps SP | Each | 415.0 | 415.0 | 3.0 | False | None | None | False | None | False | 1245.0 | 0 |
| 3744292 | 139857 | None | Item-159 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 6-32 A DP | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 |
| 3744293 | 139857 | None | Item-160 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming latest amanment 2.5 sq mm | Rmtr | 42.0 | 42.0 | 30.0 | False | None | None | False | None | False | 1260.0 | 0 |
| 3744294 | 139857 | None | Item-161 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming latest amanment 4. sq mm | Rmtr | 63.0 | 63.0 | 50.0 | False | None | None | False | None | False | 3150.0 | 0 |
| 3744295 | 139857 | None | Item-162 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. | Each | 122.0 | 122.0 | 3.0 | False | None | None | False | None | False | 366.0 | 0 |
| 3744296 | 139857 | None | Item-163 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. 12 sweep (300 mm) | Each | 2969.0 | 2969.0 | 6.0 | False | None | None | False | None | False | 17814.0 | 0 |
| 3744297 | 139857 | None | Item-164 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire. | Each | 492.0 | 492.0 | 6.0 | False | None | None | False | None | False | 2952.0 | 0 |
| 3744298 | 139857 | None | Item-165 | Borewell : Geophysical investigation :-Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry borewell towords yeild test etc and complete | Each | 5552.4 | 5552.4 | 1.0 | False | None | None | False | None | False | 5552.4 | 0 |
| 3744299 | 139857 | None | Item-166 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete Borewell depth of 0 to 50 m | Mtr | 388.5 | 388.5 | 50.0 | False | None | None | False | None | False | 19425.0 | 0 |
| 3744300 | 139857 | None | Item-167 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete Borewell depth of 50 to 100 m | Mtr | 487.2 | 487.2 | 50.0 | False | None | None | False | None | False | 24360.0 | 0 |
| 3744301 | 139857 | None | Item-168 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete Borewell depth of 100 to 150 m | Mtr | 517.65 | 517.65 | 50.0 | False | None | None | False | None | False | 25882.5 | 0 |
| 3744302 | 139857 | None | Item-169 | SUPPLY & FIXING MS CASE:- Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty | Mtr | 2029.65 | 2029.65 | 18.0 | False | None | None | False | None | False | 36533.7 | 0 |
| 3744303 | 139857 | None | Item-170 | PVC FILTER PIPE:- Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: 10.1.9 PVC pipes 160mm dia., 6 kg/sqcm & class 3 m 618 | Mtr | 648.9 | 648.9 | 150.0 | False | None | None | False | None | False | 97335.0 | 0 |
| 3744304 | 139857 | None | Item-171 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc.
Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : | Mtr | 492.45 | 492.45 | 150.0 | False | None | None | False | None | False | 73867.5 | 0 |
| 3744305 | 139857 | None | Item-172 | SUBMERSIBLE PUMPL -Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00” | Each | 29518.65 | 29518.65 | 1.0 | False | None | None | False | None | False | 29518.65 | 0 |
| 3744306 | 139857 | None | Item-173 | PVC CABLE:- Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5 m2 | Mtr | 89.25 | 89.25 | 175.0 | False | None | None | False | None | False | 15618.75 | 0 |
| 3744307 | 139857 | None | Item-174 | STARTER:- Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter | Each | 10027.5 | 10027.5 | 1.0 | False | None | None | False | None | False | 10027.5 | 0 |
| 3744308 | 139857 | None | Item-175 | Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause | Job | 3937.5 | 3937.5 | 1.0 | False | None | None | False | None | False | 3937.5 | 0 |
| 3744309 | 139857 | None | Item-176 | NON RETURN VALVE:- Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 65 mm | Each | 1627.5 | 1627.5 | 1.0 | False | None | None | False | None | False | 1627.5 | 0 |
| 3744310 | 139857 | None | Item-177 | Septic Tank & Soak Pit: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work | Cum | 107.1 | 107.1 | 73.48 | False | None | None | False | None | False | 7869.708 | 0 |
| 3744311 | 139857 | None | Item-178 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water,all materials,usage& all other appurtenaces required to complete the work | Cum | 497.7 | 497.7 | 5.9 | False | None | None | False | None | False | 2936.43 | 0 |
| 3744312 | 139857 | None | Item-179 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately).Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 9.44 | False | None | None | False | None | False | 61622.904 | 0 |
| 3744313 | 139857 | None | Item-180 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 6652.8 | 6652.8 | 6.36 | False | None | None | False | None | False | 42311.808 | 0 |
| 3744314 | 139857 | None | Item-181 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building | Cum | 3326.4 | 3326.4 | 6.36 | False | None | None | False | None | False | 21155.904 | 0 |
| 3744315 | 139857 | None | Item-182 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. | Tonne | 93929.85 | 93929.85 | 0.5 | False | None | None | False | None | False | 46964.925 | 0 |
| 3744316 | 139857 | None | Item-183 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 9094.05 | 9094.05 | 18.18 | False | None | None | False | None | False | 165329.829 | 0 |
| 3744317 | 139857 | None | Item-184 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 450.45 | 450.45 | 126.6 | False | None | None | False | None | False | 57026.97 | 0 |
| 3744318 | 139857 | None | Item-185 | Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing.150 mm dia. pipes | Mtr | 610.05 | 610.05 | 30.0 | False | None | None | False | None | False | 18301.5 | 0 |
| 3744319 | 139857 | None | Item-186 | Supplying and fixing SFRC frame and cover conforming to IS 12592 (part I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete
Medium Duty | No | 2009.7 | 2009.7 | 2.0 | False | None | None | False | None | False | 4019.4 | 0 |
| 3744320 | 139857 | None | Item-187 | Gound Floor: Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work Page No.8 Item No. 1.12 KPWD. Volumn -1 DSR 2023-24 | Cum | 96.6 | 96.6 | 31.92 | False | None | None | False | None | False | 3083.472 | 0 |
| 3744321 | 139857 | None | Item-188 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Page No.8 Item No. 1.14 KPWD. Volumn -1 DSR 2023-24 | Cum | 107.1 | 107.1 | 15.1 | False | None | None | False | None | False | 1617.21 | 0 |
| 3744322 | 139857 | None | Item-189 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Page No. 7 Item No. 1.8 KPWD. Volumn -1 DSR 2023-24 | Cum | 422.1 | 422.1 | 31.92 | False | None | None | False | None | False | 13473.432 | 0 |
| 3744323 | 139857 | None | Item-190 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Page No.15 Item No. 2.1.4 KPWD. Volumn -1 DSR 2023-24 | Cum | 6527.85 | 6527.85 | 29.8 | False | None | None | False | None | False | 194529.93 | 0 |
| 3744324 | 139857 | None | Item-191 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Kg | 154.35 | 154.35 | 1814.28 | False | None | None | False | None | False | 280034.118 | 0 |
| 3744325 | 139857 | None | Item-192 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have | Sqm | 922.95 | 922.95 | 200.64 | False | None | None | False | None | False | 185180.688 | 0 |
| 3744326 | 139857 | None | Item-193 | DESKTOP COMPUTER:- Processor Make Intel Processor Generation 10 Number of Cores per Processor 6 Processor Description Intel Core i5 Processor Number Intel Core i5 10400 Chipset Series Intel H Series Chipset Number Intel H510 Operating System (Factory Pre-Loaded) Windows 10 Professional RAM Size (GB) 16 RAM Expandability up to( using spare DIMM Slots in GB) 64 Type of Drives used to populate the Internal Bays SSD Total HDD Capacity (GB) 0 Total SSD Capacity (GB) 512 Total SSHD Capacity in addition to 8 GB Flash (GB) 0 Cabinet Form Factor Tower (13.1 to 26 Litres) Monitor Technology IPS LED Backlit Monitor Size (INCHES) 23.8 Monitor Resolution (PIXELS) 1920x1080 On Site OEM Warranty (Year) 3 | No | 85000.0 | 85000.0 | 36.0 | False | None | None | False | None | False | 3060000.0 | 0 |
| 3744327 | 139857 | None | Item-194 | Officce chairs: CRN Craft Non-Revolving and Non-Tilting chair with Armrest CRN CraftR (CRN-J-U10) | No | 3000.0 | 3000.0 | 100.0 | False | None | None | False | None | False | 300000.0 | 0 |
| 3744328 | 139857 | None | Item-195 | ALMIRAH (OFFICE):- FURNHARDT Almirah Steel shelving cabinet with partial wardrobe (ALMARI STEEL (100MM X 900MM X480MM)) | No | 19875.0 | 19875.0 | 17.0 | False | None | None | False | None | False | 337875.0 | 0 |
| 3744329 | 139857 | None | Item-196 | ALMIRAH (LIBRARY):- Unbranded Steel Bookcase having 2 Doors and cam lever lock with common key | No | 20000.0 | 20000.0 | 17.0 | False | None | None | False | None | False | 340000.0 | 0 |
| 3744330 | 139857 | None | Item-197 | FIRE AND SAFETY UNIT (Firestop Portable Fire Extinguishers ) Firestop Portable Fire Extinguishers as per IS 15683 (2018) High Pressure Extinguisher (Service Pressure 19 bar) Foam Based (as per IS 4989) Class -B | No | 10000.0 | 10000.0 | 19.0 | False | None | None | False | None | False | 190000.0 | 0 |
| 3744331 | 139857 | None | Item-198 | LAB Table:- Unbranded Laboratory Steel Furniture Side bench with rack and table top NA | No | 26500.0 | 26500.0 | 10.0 | False | None | None | False | None | False | 265000.0 | 0 |
| 3744332 | 139857 | None | Item-199 | CC TV CAMERA:- ewit 2MP BULLET CAMERA ewitR (EW-HD2420B) | No | 5000.0 | 5000.0 | 20.0 | False | None | None | False | None | False | 100000.0 | 0 |
| 3744333 | 139857 | None | Item-200 | 16 Channels DVR with 4K Type of Recorder DVR Total Number of Input Channels 16 Maximum Recording Resolution supported 4K (3840 2160) Recording Speed for all channels (fps) Upto 6 Hard Disks Provided Yes (inclusive in the scope of supply) Total Storage Capacity (TB) of the hard disk provided 16 valid BIS certificate as per IS 13252 under CSR Yes required) (Warranty 1year) | No | 100000.0 | 100000.0 | 2.0 | False | None | None | False | None | False | 200000.0 | 0 |
| 3744334 | 139857 | None | Item-201 | COMPUTER TABLE:- Mahalaxmi 1370 millimeter X 760 millimeter (mm LxD) Executive Computer Table MahalaxmiR (mct-887) | No | 11500.0 | 11500.0 | 36.0 | False | None | None | False | None | False | 414000.0 | 0 |
| 3744335 | 139857 | None | Item-202 | COMPUTER LAB CHAIRS:- Unbranded Esd Chairs as per ANSI 520 20-2007 NA (KPESDCHAIRWA) | No | 10000.0 | 10000.0 | 36.0 | False | None | None | False | None | False | 360000.0 | 0 |
| 3744336 | 139857 | None | Item-203 | DESKING & SEATING:- ALWIN Three seater classroom desking drawing ALWINR (Bapl/Classroom Desk Bench/02) | No | 13000.0 | 13000.0 | 125.0 | False | None | None | False | None | False | 1625000.0 | 0 |
| 3744337 | 139857 | None | Item-204 | Sanitary Napkins Incinetator Machine:-ViKTRON Sanitary Napkins Incinetator Machine with Smoke Control Unit ViKTRONR (IS/VIK/INCIN/15-50(1-15)/0051) | No | 18000.0 | 18000.0 | 1.0 | False | None | None | False | None | False | 18000.0 | 0 |