| 1723099937000 | 0 | None | None | Other Works | Construction of Vehicle shed at SWM Unit in Bantwal TMC limit | 1343379.67 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3721081 | 137865 | None | code01 | Earthwork in surface excavation in Ordinary soil for levelling and lowering the ground manually (other than foundation of buildings, culverts, road drains and trenches of pipe lines and cables) and removing the excavated stuff to a distance not exceeding 50m and lift upto 1.5m, excavated surface leveled and neatly dressed, disposed earth to be leveled after breaking of clods and neatly dressed as per specifications. | Cum | 273.9 | 273.9 | 143.0 | False | None | None | False | None | False | 39167.7 | 0 | | 3721082 | 137865 | None | code02 | Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m. after breaking of clods complete as per specifications. | Cum | 492.8 | 492.8 | 63.0 | False | None | None | False | None | False | 31046.4 | 0 | | 3721083 | 137865 | None | code03 | Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180Kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.85cum and fine aggregates @0.57cum machine mixed concrete laid in layers not exceeding 15cms. thick well compacted, in foundation and plinth, including cost of materials, labour HOM of machineries, curing complete as per specifications. | Cum | 6063.2 | 6063.2 | 16.0 | False | None | None | False | None | False | 97011.2 | 0 | | 3721084 | 137865 | None | code04 | Providing and laying in position reinforced cement of design mix M20 with OPC cement @340Kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878cum and fine aggregates @0.459cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layersnot exceeding 15cms thick,vibrated for all works in foundation plinth and ground floor level for roof slabs , staircase, lintels, retaining walls, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window cills, fillets etc. including cost of all materials labour HOM of machinery, curing complete as per specifications. | Cum | 7074.1 | 7074.1 | 24.0 | False | None | None | False | None | False | 169778.4 | 0 | | 3721085 | 137865 | None | code05 | Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour, complete as per specifications. | Sqm | 289.2 | 289.2 | 26.0 | False | None | None | False | None | False | 7519.2 | 0 | | 3721086 | 137865 | None | code06 | Providing and removing centering, shuttering, strutting, propping etc for columns, pillars, piers, abutments, post and struts, square/ rectangular/ polygon in plan including cost of all materials, labour complete as per specifications. | Sqm | 501.6 | 501.6 | 90.0 | False | None | None | False | None | False | 45144.0 | 0 | | 3721087 | 137865 | None | code07 | Providing and removing, centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications. | Sqm | 321.2 | 321.2 | 61.0 | False | None | None | False | None | False | 19593.2 | 0 | | 3721088 | 137865 | None | code08 | Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, laping and / or welding wherever required, tying with binding wire and anchoring to the adjointing members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of all materials, labour, HOM of machinery complete as per specifications. | Quintal | 7856.31 | 7856.31 | 23.91 | False | None | None | False | None | False | 187844.3721 | 0 | | 3721089 | 137865 | None | code09 | Filling available exacavated earth (excluding rock) in sides of foundations upto plinth in layers note exceeding 20 cms. In depth, compacting each deposited layers by ramming after watering with a lead upto 50m. And lift upto 1.5m including cost of all labour complete as per specifications | Cum | 132.0 | 132.0 | 90.0 | False | None | None | False | None | False | 11880.0 | 0 | | 3721090 | 137865 | None | code10 | Providing 20mm thick cement plaster in single coat with cement mortar 1:6, to stone masonary & concrete surface including rounding off corners wherever required smooth rendering: Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. | Sqm | 281.6 | 281.6 | 80.0 | False | None | None | False | None | False | 22528.0 | 0 | | 3721091 | 137865 | None | code11 | Fabricating, supplying & erecting M.S. angular Truss of span upto 10m. The bottom & top member is provided with 50x50x6mm double equal angles, welded back to back and in between top & bottom line, in areas of mid section is provided with 50x50x6mm equal angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plate as per Drawing No.CBS/SD/K-Mantap/9/MND/97. The entire truss is anchored in RCC columm by using 4 No.s of M.S. anchor bolts at each support, with 10mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S. angle and welding wherever necessary and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, & hire charges of machineries for cutting, welding, grinding & erection equipments etc, complete as per specifications. | Kg | 140.8 | 140.8 | 3500.0 | False | None | None | False | None | False | 492800.0 | 0 | | 3721092 | 137865 | None | code12 | Providing and installing of pre painted Galvalume iron Trapezoidal profiled sheet of approved make 1060mm width (1000mm cover width), 28-30mm crest height with crest distance of 200c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm+/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses. | Sqm | 756.8 | 756.8 | 279.0 | False | None | None | False | None | False | 211147.2 | 0 | | 3721093 | 137865 | None | code13 | Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per Specifications. | Sqm | 99.0 | 99.0 | 80.0 | False | None | None | False | None | False | 7920.0 | 0 |
|