| 3661863 | 133637 | None | I No 1.14.1 | Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting
out, shoring, strutting, barricading, caution lights, including dressing of
excavated surfaces, disposing off or levelling the excavated earth or sorting
& stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5
m including cost of labour, tools, usage of machinery & other appurtenaces
required to complete the work1.14.1 In all kinds of soils Depth upto 3 m | Cum | 107.1 | 107.1 | 16.53 | False | None | None | False | None | False | 1770.363 | 0 |
| 3661864 | 133637 | None | I No 2.1.3 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. 2.1.3 Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 0.91 | False | None | None | False | None | False | 5722.4895 | 0 |
| 3661865 | 133637 | None | I No 2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications 2.4.2 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6639.15 | 6639.15 | 2.98 | False | None | None | False | None | False | 19784.667 | 0 |
| 3661866 | 133637 | None | I No A7 | As per recommendations of Technical working group, rates for formwork shall be addedon percentage basis to the finished concrete item rate as per table below | Cum | 6639.15 | 6639.15 | 1.14 | False | None | None | False | None | False | 7568.631 | 0 |
| 3661867 | 133637 | None | I No 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft
annealed steel wire and other ancilary operations complete as per drawing and
technical specification. a. Buildings | t | 93929.85 | 93929.85 | 0.22 | False | None | None | False | None | False | 20664.567 | 0 |
| 3661868 | 133637 | None | I No 6.33 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications | Sqm | 1292.55 | 1292.55 | 14.97 | False | None | None | False | None | False | 19349.4735 | 0 |
| 3661869 | 133637 | None | I No 6.13 | Providing Half brick masonry with common burnt clay Non Modular bricks
of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1
cement : 4 coarse sand) including cost of all materials, labour, scaffolding
and usage charges of machinery & other incidental charges complete as
per the direction of engineer incharge of work. | Sqm | 1024.8 | 1024.8 | 15.92 | False | None | None | False | None | False | 16314.816 | 0 |
| 3661870 | 133637 | None | I No 8.1.2 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 253.05 | 253.05 | 48.58 | False | None | None | False | None | False | 12293.169 | 0 |
| 3661871 | 133637 | None | I No 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 143.85 | 143.85 | 25.19 | False | None | None | False | None | False | 3623.5815 | 0 |
| 3661872 | 133637 | None | I No 9.12.1 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.9.12.1 Size of Tile 500x500 mm | Sqm | 1136.1 | 1136.1 | 6.0 | False | None | None | False | None | False | 6816.6 | 0 |
| 3661873 | 133637 | None | I No 9.38 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications | Sqm | 1461.6 | 1461.6 | 7.99 | False | None | None | False | None | False | 11678.184 | 0 |
| 3661874 | 133637 | None | I No 11.16.1 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 142.8 | 142.8 | 400.0 | False | None | None | False | None | False | 57120.0 | 0 |
| 3661875 | 133637 | None | I No 7.1.1 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.7.1.1 0.63 mm thick with zinc coating not less than 275 g/ m² | Sqm | 922.95 | 922.95 | 13.05 | False | None | None | False | None | False | 12044.4975 | 0 |
| 3661876 | 133637 | None | I No 14.5 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. | No | 9074.1 | 9074.1 | 4.0 | False | None | None | False | None | False | 36296.4 | 0 |
| 3661877 | 133637 | None | I No 13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | l | 9.45 | 9.45 | 1000.0 | False | None | None | False | None | False | 9450.0 | 0 |
| 3661878 | 133637 | None | I No 13.32.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 13.32.3 25 mm nominal dia pipes | m | 500.85 | 500.85 | 5.0 | False | None | None | False | None | False | 2504.25 | 0 |
| 3661879 | 133637 | None | I No 13.8.2.2 | Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length, 20mm | No | 115.5 | 115.5 | 4.0 | False | None | None | False | None | False | 462.0 | 0 |
| 3661880 | 133637 | None | I No 13.9.1 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 100 mm diameter | No | 269.85 | 269.85 | 4.0 | False | None | None | False | None | False | 1079.4 | 0 |
| 3661881 | 133637 | None | I No 13.59 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete | No | 231.0 | 231.0 | 4.0 | False | None | None | False | None | False | 924.0 | 0 |
| 3661882 | 133637 | None | I No 1.1.1 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick | m | 72.45 | 72.45 | 8.0 | False | None | None | False | None | False | 579.6 | 0 |
| 3661883 | 133637 | None | I No 1.5 | PVC/metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box | No | 51.45 | 51.45 | 1.0 | False | None | None | False | None | False | 51.45 | 0 |
| 3661884 | 133637 | None | I No 2.3.2 | Wiring for Lightings/Power Circuit Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 Sqmm ( | m | 27.3 | 27.3 | 8.0 | False | None | None | False | None | False | 218.4 | 0 |
| 3661885 | 133637 | None | I No 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 Sqmm | m | 44.1 | 44.1 | 8.0 | False | None | None | False | None | False | 352.8 | 0 |
| 3661886 | 133637 | None | I No 3.6.1 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way | No | 107.1 | 107.1 | 1.0 | False | None | None | False | None | False | 107.1 | 0 |
| 3661887 | 133637 | None | I No 3.6.2 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps two way. | No | 174.3 | 174.3 | 1.0 | False | None | None | False | None | False | 174.3 | 0 |
| 3661888 | 133637 | None | I No 3.6.7 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch | No | 189.0 | 189.0 | 1.0 | False | None | None | False | None | False | 189.0 | 0 |
| 3661889 | 133637 | None | I No 3.6.9 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch. | No | 342.3 | 342.3 | 1.0 | False | None | None | False | None | False | 342.3 | 0 |
| 3661890 | 133637 | None | I No 3.8 | 4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. | cm | 0.43 | 0.43 | 2000.0 | False | None | None | False | None | False | 860.0 | 0 |
| 3661891 | 133637 | None | I no 11.5.3 | LED Down Lights Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W | No | 1390.2 | 1390.2 | 1.0 | False | None | None | False | None | False | 1390.2 | 0 |
| 3661892 | 133637 | None | I No 12.46 | Lamp Holder Supplying & Fixing of 70-150 Watts lamp holder 2 Pin | No | 66.15 | 66.15 | 2.0 | False | None | None | False | None | False | 132.3 | 0 |