| 3768196 | 141903 | None | code01 | Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth | Cum | 380.1 | 380.1 | 1300.0 | False | None | None | False | None | False | 494130.0 | 0 |
| 3768197 | 141903 | None | code02 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off theexcavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m | Cum | 254.1 | 254.1 | 550.0 | False | None | None | False | None | False | 139755.0 | 0 |
| 3768198 | 141903 | None | code03 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m | Cum | 454.65 | 454.65 | 400.0 | False | None | None | False | None | False | 181860.0 | 0 |
| 3768199 | 141903 | None | code04 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:4:8 (M7.5) Using 40 mm and down size graded crushed coarse aggregates | Cum | 5947.2 | 5947.2 | 230.0 | False | None | None | False | None | False | 1367856.0 | 0 |
| 3768200 | 141903 | None | code05 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7185.02 | 7185.02 | 155.0 | False | None | None | False | None | False | 1113678.1 | 0 |
| 3768201 | 141903 | None | code06 | Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of formwork is included) Columns M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 12214.76 | 12214.76 | 70.0 | False | None | None | False | None | False | 855033.2 | 0 |
| 3768202 | 141903 | None | code07 | Plinth Beams | Cum | 10777.73 | 10777.73 | 40.0 | False | None | None | False | None | False | 431109.2 | 0 |
| 3768203 | 141903 | None | code08 | Beams and Lintels of Buildings | Cum | 11496.24 | 11496.24 | 120.0 | False | None | None | False | None | False | 1379548.8 | 0 |
| 3768204 | 141903 | None | code09 | Roof (Straight & Arched) | Cum | 10777.73 | 10777.73 | 150.0 | False | None | None | False | None | False | 1616659.5 | 0 |
| 3768205 | 141903 | None | code10 | Chejjas, Canopy & Other Architectural projections of minor sections | Cum | 10418.46 | 10418.46 | 2.0 | False | None | None | False | None | False | 20836.92 | 0 |
| 3768206 | 141903 | None | code11 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes herever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7318.08 | 7318.08 | 22.0 | False | None | None | False | None | False | 160997.76 | 0 |
| 3768207 | 141903 | None | code12 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings | Tonne | 93929.85 | 93929.85 | 58.0 | False | None | None | False | None | False | 5447931.3 | 0 |
| 3768208 | 141903 | None | code13 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6708.45 | 6708.45 | 70.0 | False | None | None | False | None | False | 469591.5 | 0 |
| 3768209 | 141903 | None | code14 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 8621.55 | 8621.55 | 490.0 | False | None | None | False | None | False | 4224559.5 | 0 |
| 3768210 | 141903 | None | code15 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 404.25 | 404.25 | 1500.0 | False | None | None | False | None | False | 606375.0 | 0 |
| 3768211 | 141903 | None | code16 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per
directions of Engineer-in-charge | Sqm | 267.75 | 267.75 | 3500.0 | False | None | None | False | None | False | 937125.0 | 0 |
| 3768212 | 141903 | None | code17 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 625.8 | 625.8 | 1000.0 | False | None | None | False | None | False | 625800.0 | 0 |
| 3768213 | 141903 | None | code18 | Providing, making & fixing in position TEAK wood DOOR with frame wood of size of 11"x3" & panelled shutter of 35mm thick approved shape with SS fixtures including melamined polishing. Cost to include fixing of door frame in position with MS Holdfast embedded in CC 1:2:4 etc. complete.Shuttr of 45mm thick (For Main and Pooja room doors) | Sqm | 22500.0 | 22500.0 | 50.0 | False | None | None | False | None | False | 1125000.0 | 0 |
| 3768214 | 141903 | None | code19 | Providing, making & fixing in position teak wood frame for DOORS of size of 5"x3" & Laminated shutter of approved shape with aluminium SS fixtures including one coat of primer & two coats of enamel paint of approved colour. Cost to include fixing of door frame in position with MS Holdfast embedded in CC 1:2:4 etc. complete. (For Bathroom doors) | Sqm | 12500.0 | 12500.0 | 55.0 | False | None | None | False | None | False | 687500.0 | 0 |
| 3768215 | 141903 | None | code20 | Providing & fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV (Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D 3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm 2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) | Sqm | 6557.25 | 6557.25 | 60.0 | False | None | None | False | None | False | 393435.0 | 0 |
| 3768216 | 141903 | None | code21 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Kg | 593.25 | 593.25 | 1800.0 | False | None | None | False | None | False | 1067850.0 | 0 |
| 3768217 | 141903 | None | code22 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm | Sqm | 1233.75 | 1233.75 | 2500.0 | False | None | None | False | None | False | 3084375.0 | 0 |
| 3768218 | 141903 | None | code23 | Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement
slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer | Sqm | 2711.1 | 2711.1 | 80.0 | False | None | None | False | None | False | 216888.0 | 0 |
| 3768219 | 141903 | None | code24 | Providing and laying 12mm thick Anti-Skid / RUSTIC Tiles for FLOORING with cement coating on back side and curing strictly for a minium period of 2 days for BALCONIES laid on 12mm (average) thick cement mortat 1:4(1 Cement:4 coarse sand) and jointed with white cement slurry with matching pigments and polishing | Sqm | 2852.0 | 2852.0 | 50.0 | False | None | None | False | None | False | 142600.0 | 0 |
| 3768220 | 141903 | None | code25 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete | Sqm | 1129.8 | 1129.8 | 80.0 | False | None | None | False | None | False | 90384.0 | 0 |
| 3768221 | 141903 | None | code26 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete | Shed | 1161.3 | 1161.3 | 155.0 | False | None | None | False | None | False | 180001.5 | 0 |
| 3768222 | 141903 | None | code27 | Providing and applying white cement based putty of average thick ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge | Sqm | 105.0 | 105.0 | 3900.0 | False | None | None | False | None | False | 409500.0 | 0 |
| 3768223 | 141903 | None | code28 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 55.65 | 55.65 | 3900.0 | False | None | None | False | None | False | 217035.0 | 0 |
| 3768224 | 141903 | None | code29 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of ap proved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge | Sqm | 103.95 | 103.95 | 3900.0 | False | None | None | False | None | False | 405405.0 | 0 |
| 3768225 | 141903 | None | code30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 182.7 | 182.7 | 1300.0 | False | None | None | False | None | False | 237510.0 | 0 |
| 3768226 | 141903 | None | code31 | Painting with synthetic enamel paint of approved brand and manu facture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 175.35 | 175.35 | 250.0 | False | None | None | False | None | False | 43837.5 | 0 |
| 3768227 | 141903 | None | code32 | Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and Usage charges of machinery complete as per specifications | Sqm | 2711.1 | 2711.1 | 200.0 | False | None | None | False | None | False | 542220.0 | 0 |
| 3768228 | 141903 | None | code33 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a prim ing coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Kg | 142.8 | 142.8 | 2000.0 | False | None | None | False | None | False | 285600.0 | 0 |
| 3768229 | 141903 | None | code34 | Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade. 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses | Sqm | 708.64 | 708.64 | 120.0 | False | None | None | False | None | False | 85036.8 | 0 |
| 3768230 | 141903 | None | code35 | roviding and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 8689.8 | 8689.8 | 50.0 | False | None | None | False | None | False | 434490.0 | 0 |
| 3768231 | 141903 | None | code36 | Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ) | m | 31.93 | 31.93 | 1100.0 | False | None | None | False | None | False | 35123.0 | 0 |
| 3768232 | 141903 | None | code37 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for not and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (Internal work exposed on on wall) a) 20 mm dia | m | 161.71 | 161.71 | 80.0 | False | None | None | False | None | False | 12936.8 | 0 |
| 3768233 | 141903 | None | code38 | 25 mm dia | Mtr | 201.88 | 201.88 | 50.0 | False | None | None | False | None | False | 10094.0 | 0 |
| 3768234 | 141903 | None | code39 | 32 mm dia | Mtr | 261.62 | 261.62 | 40.0 | False | None | None | False | None | False | 10464.8 | 0 |
| 3768235 | 141903 | None | code40 | Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) | Nos | 7032.84 | 7032.84 | 2.0 | False | None | None | False | None | False | 14065.68 | 0 |
| 3768236 | 141903 | None | code41 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore | Nos | 576.45 | 576.45 | 3.0 | False | None | None | False | None | False | 1729.35 | 0 |
| 3768237 | 141903 | None | code42 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame & cover | Nos | 4447.8 | 4447.8 | 3.0 | False | None | None | False | None | False | 13343.4 | 0 |
| 3768238 | 141903 | None | code43 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover | Nos | 5726.7 | 5726.7 | 2.0 | False | None | None | False | None | False | 11453.4 | 0 |
| 3768239 | 141903 | None | code44 | Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber.Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm diaCirc. B M.H: (Upto 1 Mtr depth and SFRC cover and Frame) | Nos | 30499.35 | 30499.35 | 2.0 | False | None | None | False | None | False | 60998.7 | 0 |
| 3768240 | 141903 | None | code45 | Providing & fixing Table Top Basin, Size: 470x470x110 mm of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work | Nos | 9243.0 | 9243.0 | 18.0 | False | None | None | False | None | False | 166374.0 | 0 |
| 3768241 | 141903 | None | code46 | Providing & fixing Rimless Back to Wall WC with UF soft close slim seat cover, Hinges, FixingAccessories and Accessories Set, Size: 360x575x410 mm, P Trap-180 mm of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work | Nos | 23541.0 | 23541.0 | 22.0 | False | None | None | False | None | False | 517902.0 | 0 |
| 3768242 | 141903 | None | code47 | Providing & fixing Soap Dispenser with Glass Bottle of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work | Nos | 1961.0 | 1961.0 | 10.0 | False | None | None | False | None | False | 19610.0 | 0 |
| 3768243 | 141903 | None | code48 | Providing & fixing Towel Ring Round with Round Flange of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work | Nos | 1396.0 | 1396.0 | 10.0 | False | None | None | False | None | False | 13960.0 | 0 |
| 3768244 | 141903 | None | code49 | Providing & fixing Toilet Roll Holder with Stainless Steel Flap of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work | Nos | 1338.0 | 1338.0 | 22.0 | False | None | None | False | None | False | 29436.0 | 0 |
| 3768245 | 141903 | None | code50 | Providing & fixing Urinal (Back Inlet) With Fixing Accessories, Size: 385x325x635 mm of Jaquar or equivalent make including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work | Nos | 10374.0 | 10374.0 | 15.0 | False | None | None | False | None | False | 155610.0 | 0 |
| 3768246 | 141903 | None | code51 | Providing and fixing to wall, ceiling and floor, high density polyethylene pipes 6.00 kgf per sq.cm working pressure 140mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. 140mm | m | 763.23 | 763.23 | 50.0 | False | None | None | False | None | False | 38161.5 | 0 |
| 3768247 | 141903 | None | code52 | Providing and fixing on wall surface. 4.0 kg per sq.cm H.D.P.E. rain down water pipes 110mm outer dia. approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, complete as per specifications | m | 527.36 | 527.36 | 40.0 | False | None | None | False | None | False | 21094.4 | 0 |
| 3768248 | 141903 | None | code53 | Providing and fixing 75mm to 150mm dia NP grating | No | 154.5 | 154.5 | 25.0 | False | None | None | False | None | False | 3862.5 | 0 |
| 3768249 | 141903 | None | code54 | Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary | m | 61.0 | 61.0 | 350.0 | False | None | None | False | None | False | 21350.0 | 0 |
| 3768250 | 141903 | None | code55 | 25mm dia 2 mm thick | m | 70.0 | 70.0 | 250.0 | False | None | None | False | None | False | 17500.0 | 0 |
| 3768251 | 141903 | None | code56 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete | m | 26.0 | 26.0 | 300.0 | False | None | None | False | None | False | 7800.0 | 0 |
| 3768252 | 141903 | None | code57 | Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using copper PVC insulated multistrand 2X1.5 Sqmm copper wire with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood /PVC round block complete for each outlet (P-3;I-8) (a) Short point up to 3 Mtrs from tapping point to outlet via switch | Each | 276.0 | 276.0 | 50.0 | False | None | None | False | None | False | 13800.0 | 0 |
| 3768253 | 141903 | None | code58 | b Medium point above 3 Mtrs Upto 6 Mtrs from tapping point to outlet via switch | Each | 386.0 | 386.0 | 60.0 | False | None | None | False | None | False | 23160.0 | 0 |
| 3768254 | 141903 | None | code59 | c Long point above 6 Mtrs Upto 10 Mtrs from tapping point to outlet via switch | Each | 567.0 | 567.0 | 50.0 | False | None | None | False | None | False | 28350.0 | 0 |
| 3768255 | 141903 | None | code60 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way | Each | 123.0 | 123.0 | 20.0 | False | None | None | False | None | False | 2460.0 | 0 |
| 3768256 | 141903 | None | code61 | 4-5Way | Each | 138.0 | 138.0 | 20.0 | False | None | None | False | None | False | 2760.0 | 0 |
| 3768257 | 141903 | None | code62 | 6Way | Each | 212.0 | 212.0 | 20.0 | False | None | None | False | None | False | 4240.0 | 0 |
| 3768258 | 141903 | None | code63 | 8Way | Each | 250.0 | 250.0 | 20.0 | False | None | None | False | None | False | 5000.0 | 0 |
| 3768259 | 141903 | None | code64 | 10-12Way | Each | 325.0 | 325.0 | 15.0 | False | None | None | False | None | False | 4875.0 | 0 |
| 3768260 | 141903 | None | code65 | 16-18Way | Each | 354.0 | 354.0 | 10.0 | False | None | None | False | None | False | 3540.0 | 0 |
| 3768261 | 141903 | None | code66 | Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box | Each | 49.0 | 49.0 | 50.0 | False | None | None | False | None | False | 2450.0 | 0 |
| 3768262 | 141903 | None | code67 | 25mm deep junction box | Each | 51.0 | 51.0 | 20.0 | False | None | None | False | None | False | 1020.0 | 0 |
| 3768263 | 141903 | None | code68 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module | Each | 152.0 | 152.0 | 20.0 | False | None | None | False | None | False | 3040.0 | 0 |
| 3768264 | 141903 | None | code69 | 4 Module | Each | 175.0 | 175.0 | 20.0 | False | None | None | False | None | False | 3500.0 | 0 |
| 3768265 | 141903 | None | code70 | 6 Module | Each | 244.0 | 244.0 | 20.0 | False | None | None | False | None | False | 4880.0 | 0 |
| 3768266 | 141903 | None | code71 | 8 Module | Each | 302.0 | 302.0 | 20.0 | False | None | None | False | None | False | 6040.0 | 0 |
| 3768267 | 141903 | None | code72 | 10 -12 Module | Each | 363.0 | 363.0 | 15.0 | False | None | None | False | None | False | 5445.0 | 0 |
| 3768268 | 141903 | None | code73 | 16-18 Module | Each | 403.0 | 403.0 | 10.0 | False | None | None | False | None | False | 4030.0 | 0 |
| 3768269 | 141903 | None | code74 | Wiring for lighting/power circuit using one of PVC insulated 1100V grade,multistrand Copper conductor single core cable in open or concealed system of wiring (a) 1.5 Sqmm | m | 26.0 | 26.0 | 550.0 | False | None | None | False | None | False | 14300.0 | 0 |
| 3768270 | 141903 | None | code75 | b 2.5 Sqmm | m | 40.0 | 40.0 | 550.0 | False | None | None | False | None | False | 22000.0 | 0 |
| 3768271 | 141903 | None | code76 | c 4.0 Sqmm | m | 59.0 | 59.0 | 250.0 | False | None | None | False | None | False | 14750.0 | 0 |
| 3768272 | 141903 | None | code77 | Supplying and fixing of modular switch/socket/stepped electronic regulator/dimmer/telephone socket etc on existing modular switch plate.(P-8;I-18) (a) 6 Amps 3 way socket | No | 162.0 | 162.0 | 35.0 | False | None | None | False | None | False | 5670.0 | 0 |
| 3768273 | 141903 | None | code78 | Stepped fan regulator | Each | 313.0 | 313.0 | 20.0 | False | None | None | False | None | False | 6260.0 | 0 |
| 3768274 | 141903 | None | code79 | 32 Amps DP switch | Each | 375.0 | 375.0 | 10.0 | False | None | None | False | None | False | 3750.0 | 0 |
| 3768275 | 141903 | None | code80 | 6/16A Universal Socket | Each | 249.0 | 249.0 | 20.0 | False | None | None | False | None | False | 4980.0 | 0 |
| 3768276 | 141903 | None | code81 | TV/Telephone Socket | Each | 79.0 | 79.0 | 10.0 | False | None | None | False | None | False | 790.0 | 0 |
| 3768277 | 141903 | None | code82 | 6Amps 2 Way | Each | 95.0 | 95.0 | 15.0 | False | None | None | False | None | False | 1425.0 | 0 |
| 3768278 | 141903 | None | code83 | 6Amps one way Switch | Each | 70.0 | 70.0 | 75.0 | False | None | None | False | None | False | 5250.0 | 0 |
| 3768279 | 141903 | None | code84 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. (16-25 A 2 pole) | No | 2536.0 | 2536.0 | 10.0 | False | None | None | False | None | False | 25360.0 | 0 |
| 3768280 | 141903 | None | code85 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. (4 Way SP & N) | No | 1104.0 | 1104.0 | 10.0 | False | None | None | False | None | False | 11040.0 | 0 |
| 3768281 | 141903 | None | code86 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the mter board using 40mm dia 2.90mm thick GI pipe 2.5metr long buried in a pit. The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth.The connection from the pipe to hte conduit etc,is to be established through GI wire of size as per ISI specifications 7.3.3 of IS 732 using 12mm dia bolts,nuts,washers and checknuts etc, the pipe shall have through holes of 12mm dia | Each | 2999.7 | 2999.7 | 4.0 | False | None | None | False | None | False | 11998.8 | 0 |
| 3768282 | 141903 | None | code87 | Supplying of LT UG cables having aluminium conductor PVC insulated sheathed, galvanised, steel wire/steel tape armoured cable with PVC outer sheathing 1.1 KV class (conforming to SO 1554) 4 core 16 sqmm | m | 150.0 | 150.0 | 50.0 | False | None | None | False | None | False | 7500.0 | 0 |
| 3768283 | 141903 | None | code88 | Supplying and fixing of class A GI pipe on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class 40 mm | m | 335.0 | 335.0 | 50.0 | False | None | None | False | None | False | 16750.0 | 0 |
| 3768284 | 141903 | None | code89 | Supply and fixing of Panel Board for fixing of indipendent meters for residencial purpose including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work | Each | 12000.0 | 12000.0 | 2.0 | False | None | None | False | None | False | 24000.0 | 0 |
| 3768285 | 141903 | None | code90 | Providing and fixing 1 HP water pump including cost of labour, transporatation, loading & Unloading charges etc complete as per the directions of the Engineer in charge of the work | Each | 10000.0 | 10000.0 | 2.0 | False | None | None | False | None | False | 20000.0 | 0 |
| 3768286 | 141903 | None | code91 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70 percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltage Overload, short circuit miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50,60Hz application. Compliance to IS 10322 IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Streetlight 170 W | No | 14705.0 | 14705.0 | 10.0 | False | None | None | False | None | False | 147050.0 | 0 |
| 3768287 | 141903 | None | code92 | Supplying of 1x4' feet - PVC Batten with integrated LED tube 20,22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V at 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w | Each | 740.0 | 740.0 | 60.0 | False | None | None | False | None | False | 44400.0 | 0 |
| 3768288 | 141903 | None | code93 | Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage.,short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2'x2' 36 W | Each | 4553.0 | 4553.0 | 40.0 | False | None | None | False | None | False | 182120.0 | 0 |