createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1723464093013 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3750.00 emd 225000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 28-08-2024 17:00:00 tenderQueryClose 27-08-2024 17:00:00 technicalBidOpen 30-08-2024 11:00:00 publishedDate 13-08-2024 16:19:27 publishedByPost BESCOM_CE_CTAZ_CTD publishedByUser KPE19796 - M ROMARAJU bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 27-08-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson EXECUTIVE ENGINEER CIVIL splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08194230088 mobileNumber 9448094835 tenderSupplierList None
tenderSchedule	createdTs 1723464093047 version 4 createdDate None modifiedDate None tenderNumber BESCOM/2024-25/BD/WORK_INDENT182 title Construction of Section office building by dismantling existing Section office building at BESCOM premises, Gulur, Tumkur Tq. description Construction of Section office building by dismantling existing Section office building at BESCOM premises, Gulur, Tumkur Tq. category WORKS categoryText Works ecv 15000000.00 deptName Bangalore Electricity Supply Company Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3788 locationName BESCOM Chitradurga Area Zone(CTAZ) Office Bengaluru provisionalAmount 15000000.0 groupOverheadTotal 375.2 fileNumber CEE/CZ/EEC/24-25/LOT1/KW4-1/CALL-2
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1723464093000 0 None None Buildings Construction of Section office building by dismantling existing Section office building at BESCOM premises, Gulur, Tumkur Tq. 14999624.8 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3759939 141339 None code01 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer a) In area of light jungle Sqm 4.64 4.64 500.0 False None None False None False 2320.0 0 3759940 141339 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 120.36 120.36 461.0 False None None False None False 55485.96 0 3759941 141339 None code03 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. at 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 139.24 139.24 110.0 False None None False None False 15316.4 0 3759942 141339 None code04 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cmin depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto1.5 m.etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 313.88 313.88 84.0 False None None False None False 26365.92 0 3759943 141339 None code05 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 510.94 510.94 270.0 False None None False None False 137953.8 0 3759944 141339 None code06 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications Cum 3164.76 3164.76 41.0 False None None False None False 129755.16 0 3759945 141339 None code07 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required, including necessary formwork / shuttering to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 6884.03 6884.03 68.98 False None None False None False 474860.3894 0 3759946 141339 None code08 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 8012.15 8012.15 45.66 False None None False None False 365834.769 0 3759947 141339 None code09 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. and additional centring charges for column Cum 13299.78 13299.78 14.69 False None None False None False 195373.7682 0 3759948 141339 None code10 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. and additional centring charges for beam Cum 12517.44 12517.44 26.29 False None None False None False 329083.4976 0 3759949 141339 None code11 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings Kgs 105.56 105.56 9200.0 False None None False None False 971152.0 0 3759950 141339 None code12 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in charge of work. etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 9414.04 9414.04 13.0 False None None False None False 122382.52 0 3759951 141339 None code13 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement: 6 coarse sand) etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 7539.02 7539.02 19.0 False None None False None False 143241.38 0 3759952 141339 None code14 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources).& Extra for providing and mixing water proofing material in cement concretework in doses by weight of cement as per manufacturer's specification.per 50kgcement. Sqm 606.4 606.4 17.0 False None None False None False 10308.8 0 3759953 141339 None code15 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, including formwork, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) for M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates do- Columns Cum 13299.78 13299.78 7.07 False None None False None False 94029.4446 0 3759954 141339 None code16 do-Lintels & Beams Cum 12517.44 12517.44 13.54 False None None False None False 169486.1376 0 3759955 141339 None code17 do- Chajjas & Staircase Cum 11343.93 11343.93 6.74 False None None False None False 76458.0882 0 3759956 141339 None code18 do- Roof Slab Cum 11735.1 11735.1 16.48 False None None False None False 193394.448 0 3759957 141339 None code19 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). Kgs 105.56 105.56 7450.0 False None None False None False 786422.0 0 3759958 141339 None code20 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in charge of work etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 9403.42 9403.42 91.0 False None None False None False 855711.22 0 3759959 141339 None code21 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in charge of work. etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 1183.54 1183.54 55.0 False None None False None False 65094.7 0 3759960 141339 None code22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Kgs 198.24 198.24 500.0 False None None False None False 99120.0 0 3759961 141339 None code23 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 160.48 160.48 2144.0 False None None False None False 344069.12 0 3759962 141339 None code24 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 417.72 417.72 707.0 False None None False None False 295328.04 0 3759963 141339 None code25 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 411.82 411.82 315.0 False None None False None False 129723.3 0 3759964 141339 None code26 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 300.9 300.9 299.0 False None None False None False 89969.1 0 3759965 141339 None code27 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 118.0 118.0 614.0 False None None False None False 72452.0 0 3759966 141339 None code28 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. Sqm 62.54 62.54 614.0 False None None False None False 38399.56 0 3759967 141339 None code29 Ceiling / Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 149.86 149.86 614.0 False None None False None False 92014.04 0 3759968 141339 None code30 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work(Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 184.08 184.08 707.0 False None None False None False 130144.56 0 3759969 141339 None code31 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 59.0 59.0 324.5 False None None False None False 19145.5 0 3759970 141339 None code32 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 135.7 135.7 475.0 False None None False None False 64457.5 0 3759971 141339 None code33 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 62.54 62.54 180.0 False None None False None False 11257.2 0 3759972 141339 None code34 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.for flooring & skirting Size of Tile 600x600 mm. Sqm 1386.5 1386.5 119.0 False None None False None False 164993.5 0 3759973 141339 None code35 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1049.02 1049.02 9.0 False None None False None False 9441.18 0 3759974 141339 None code36 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1709.82 1709.82 32.0 False None None False None False 54714.24 0 3759975 141339 None code37 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including nosing/chamfering, rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2909.88 2909.88 39.0 False None None False None False 113485.32 0 3759976 141339 None code38 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Kgs 666.7 666.7 450.0 False None None False None False 300015.0 0 3759977 141339 None code39 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mm height with reinforcement of1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Co extruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Sqm 7946.12 7946.12 19.0 False None None False None False 150976.28 0 3759978 141339 None code40 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at6PHR with TPE (Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame. The frame having overall size of 39mm x39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Sqm 6748.42 6748.42 1.0 False None None False None False 6748.42 0 3759979 141339 None code41 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 162927.32 162927.32 1.0 False None None False None False 162927.32 0 3759980 141339 None code42 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991 from manufacturer complete as per spcification. -do- 35 mm thick both side Teak Sqm 5347.76 5347.76 7.0 False None None False None False 37434.32 0 3759981 141339 None code43 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1241.36 1241.36 5.0 False None None False None False 6206.8 0 3759982 141339 None code44 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 141.6 141.6 5.0 False None None False None False 708.0 0 3759983 141339 None code45 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete. No 279.66 279.66 5.0 False None None False None False 1398.3 0 3759984 141339 None code46 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10mm. No 513.3 513.3 10.0 False None None False None False 5133.0 0 3759985 141339 None code47 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5 mm (heavy type). No 324.5 324.5 15.0 False None None False None False 4867.5 0 3759986 141339 None code48 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications etc.,with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 1198.88 1198.88 3.0 False None None False None False 3596.64 0 3759987 141339 None code49 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. Rmtr 758.74 758.74 12.0 False None None False None False 9104.88 0 3759988 141339 None code50 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. Sqm 4289.3 4289.3 4.0 False None None False None False 17157.2 0 3759989 141339 None code51 WATERPROOFING FOR TOILETS SUNK PORTIONS Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied at 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer at 0.1 L/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.at all levells. Sqm 869.66 869.66 9.805 False None None False None False 8527.0163 0 3759990 141339 None code52 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curing complete as per specifications Cum 2380.06 2380.06 1.5 False None None False None False 3570.09 0 3759991 141339 None code53 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. Sqm 4256.26 4256.26 14.0 False None None False None False 59587.64 0 3759992 141339 None code54 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Kgs 577.02 577.02 94.0 False None None False None False 54239.88 0 3759993 141339 None code55 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Sqm 673.78 673.78 26.0 False None None False None False 17518.28 0 3759994 141339 None code56 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 1159.94 1159.94 3.0 False None None False None False 3479.82 0 3759995 141339 None code57 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m2) including cost of materials, labour, usage charges of machinery complete as per specifications. Sqm 1381.78 1381.78 5.0 False None None False None False 6908.9 0 3759996 141339 None code58 Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: With brass cover plate minimum 1.25 mm thickness including cost of materials, labour, usage charges of machinery complete as per specifications. Each 3308.72 3308.72 2.0 False None None False None False 6617.44 0 3759997 141339 None code59 Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick at 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Powder coated minimum thickness 50 micron aluminium tubular handle bar including cost of materials, labour, usage charges of machinery complete as per specifications. Each 759.92 759.92 2.0 False None None False None False 1519.84 0 3759998 141339 None code60 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, including formwork, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) for M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates do- Columns Cum 13432.78 13432.78 6.75 False None None False None False 90671.265 0 3759999 141339 None code61 do-Lintels & Beams Cum 12642.61 12642.61 13.4 False None None False None False 169410.974 0 3760000 141339 None code62 do-Chajjas & Staircase Cum 11457.37 11457.37 6.042 False None None False None False 69225.42954 0 3760001 141339 None code63 do-Roof Slab Cum 11852.45 11852.45 11.02 False None None False None False 130613.999 0 3760002 141339 None code64 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kgs 106.61 106.61 5005.0 False None None False None False 533583.05 0 3760003 141339 None code65 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery at other incidental charges complete as per the direction of engineer in charge of work etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 9497.45 9497.45 27.36 False None None False None False 259850.232 0 3760004 141339 None code66 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in charge of work. etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 1195.37 1195.37 50.625 False None None False None False 60515.60625 0 3760005 141339 None code67 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Kgs 200.22 200.22 155.0 False None None False None False 31034.1 0 3760006 141339 None code68 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs 162.08 162.08 200.0 False None None False None False 32416.0 0 3760007 141339 None code69 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 421.9 421.9 214.0 False None None False None False 90286.6 0 3760008 141339 None code70 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 415.94 415.94 273.0 False None None False None False 113551.62 0 3760009 141339 None code71 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 303.91 303.91 199.0 False None None False None False 60478.09 0 3760010 141339 None code72 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 119.18 119.18 472.0 False None None False None False 56252.96 0 3760011 141339 None code73 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. Sqm 63.17 63.17 472.0 False None None False None False 29816.24 0 3760012 141339 None code74 Ceiling / Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 151.36 151.36 472.0 False None None False None False 71441.92 0 3760013 141339 None code75 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work(Two coats applied at 1.43 litre/ 10 m2. Over and including priming coat of exterior primer applied at 0.90 litre/10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 185.92 185.92 214.0 False None None False None False 39786.88 0 3760014 141339 None code76 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 59.59 59.59 49.0 False None None False None False 2919.91 0 3760015 141339 None code77 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 137.06 137.06 199.0 False None None False None False 27274.94 0 3760016 141339 None code78 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 63.17 63.17 180.0 False None None False None False 11370.6 0 3760017 141339 None code79 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours at shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joint with white cement and matching pigments etc. complete.for flooring & skirting Size of Tile 600x600 mm Sqm 1400.36 1400.36 86.0 False None None False None False 120430.96 0 3760018 141339 None code80 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1059.51 1059.51 5.0 False None None False None False 5297.55 0 3760019 141339 None code81 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1726.92 1726.92 32.0 False None None False None False 55261.44 0 3760020 141339 None code82 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including nosing/chamfering, rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2938.98 2938.98 34.0 False None None False None False 99925.32 0 3760021 141339 None code83 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Kgs 673.37 673.37 452.0 False None None False None False 304363.24 0 3760022 141339 None code84 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mm height with reinforcement of1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Co extruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T andP's shall not be made) with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Sqm 8025.58 8025.58 19.0 False None None False None False 152486.02 0 3760023 141339 None code85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at6PHR with TPE (Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P s shall not be made) etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Sqm 6815.9 6815.9 1.0 False None None False None False 6815.9 0 3760024 141339 None code86 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 164556.59 164556.59 1.0 False None None False None False 164556.59 0 3760025 141339 None code87 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991 from manufacturer complete as per spcification.-do- 35 mm thick both side Teak Sqm 5401.24 5401.24 4.0 False None None False None False 21604.96 0 3760026 141339 None code88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. No 1253.77 1253.77 6.0 False None None False None False 7522.62 0 3760027 141339 None code89 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. No 143.02 143.02 6.0 False None None False None False 858.12 0 3760028 141339 None code90 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 282.46 282.46 6.0 False None None False None False 1694.76 0 3760029 141339 None code91 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10mm No 518.43 518.43 6.0 False None None False None False 3110.58 0 3760030 141339 None code92 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5 mm (heavy type) No 327.74 327.74 12.0 False None None False None False 3932.88 0 3760031 141339 None code93 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications etc.,with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 1210.87 1210.87 2.0 False None None False None False 2421.74 0 3760032 141339 None code94 Providing & fixing Factory made single extruded Wood Polymer Composite (WPC) solid door/window, clerestory windows & frames /chowkhat of frame size 65 x 100mm . Rmtr 766.33 766.33 12.0 False None None False None False 9195.96 0 3760033 141339 None code95 Providing & fixing Factory made 100% carpenter friendly ready to use Single Solid Plain Wood Polymer Composite (WPC) flush shutter of 35mm thickness which is anti termite and having high water absorption property. The cost includes cost of materials, transportation, labour and fixing charges. Sqm 4332.19 4332.19 4.0 False None None False None False 17328.76 0 3760034 141339 None code96 WATERPROOFING FOR TOILETS SUNK PORTIONS Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied at 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer at 0.1 L/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification at with a 10 years warranty on product at work from certified manufacturers as per the direction of the Engineer In charge.at all levells Sqm 878.36 878.36 6.0 False None None False None False 5270.16 0 3760035 141339 None code97 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in2coats at 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer at 150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge etc., complete with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Sqm 973.7 973.7 30.0 False None None False None False 29211.0 0 3760036 141339 None code98 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curing complete as per specifications. Cum 2403.86 2403.86 3.9 False None None False None False 9375.054 0 3760037 141339 None code99 Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Sqm 673.36 673.36 30.0 False None None False None False 20200.8 0 3760038 141339 None code100 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, including formwork, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) for M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. do- Columns Cum 13567.1 13567.1 1.49 False None None False None False 20214.979 0 3760039 141339 None code101 do-Lintels & Beams Cum 12769.04 12769.04 3.4 False None None False None False 43414.736 0 3760040 141339 None code102 do-Chajjas & Staircase Cum 11571.94 11571.94 0.192 False None None False None False 2221.81248 0 3760041 141339 None code103 do -Roof Slab Cum 11970.98 11970.98 3.0 False None None False None False 35912.94 0 3760042 141339 None code104 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). Kgs 107.68 107.68 1115.0 False None None False None False 120063.2 0 3760043 141339 None code105 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer in charge of work etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 9592.43 9592.43 23.0 False None None False None False 220625.89 0 3760044 141339 None code106 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 426.12 426.12 173.0 False None None False None False 73718.76 0 3760045 141339 None code107 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 415.94 415.94 64.0 False None None False None False 26620.16 0 3760046 141339 None code108 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 306.95 306.95 20.0 False None None False None False 6139.0 0 3760047 141339 None code109 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 120.37 120.37 84.0 False None None False None False 10111.08 0 3760048 141339 None code110 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. Sqm 63.8 63.8 84.0 False None None False None False 5359.2 0 3760049 141339 None code111 Ceiling / Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 152.87 152.87 84.0 False None None False None False 12841.08 0 3760050 141339 None code112 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work(Two coats applied at 1.43 litre/ 10 m2. Over and including priming coat of exterior primer applied at 0.90 litre/10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 187.78 187.78 173.0 False None None False None False 32485.94 0 3760051 141339 None code113 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in2coats at 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer at 150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge etc., complete with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Sqm 983.44 983.44 80.0 False None None False None False 78675.2 0 3760052 141339 None code114 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curing complete as per specifications Cum 1342.14 1342.14 10.0 False None None False None False 13421.4 0 3760053 141339 None code115 Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Sqm 680.1 680.1 80.0 False None None False None False 54408.0 0 3760054 141339 None code116 Supplying PVC ring tite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials(excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to th required pressure as per ISS(Contractor will make his own arrangements for procuring water for testing)etc. for: PVC pipes 140mm dia., 6 kg/sqcm & class etc.,with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Rmtr 669.06 669.06 65.0 False None None False None False 43488.9 0 3760055 141339 None code117 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials(excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to th required pressure as per ISS(Contractor will make his own arrangements for procuring water for testing)etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 etc.,with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Rmtr 464.92 464.92 55.0 False None None False None False 25570.6 0 3760056 141339 None code118 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials(excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to th required pressure as per ISS(Contractor will make his own arrangements for procuring water for testing)etc. for: PVC pipes 90mm dia., 6 kg/sqcm & class 3 etc.,with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Rmtr 331.58 331.58 55.0 False None None False None False 18236.9 0 3760057 141339 None code119 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 40mm nominal OD pipes etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Rmtr 632.48 632.48 150.0 False None None False None False 94872.0 0 3760058 141339 None code120 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming toIS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 32mm nominal OD pipes etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Rmtr 472.0 472.0 120.0 False None None False None False 56640.0 0 3760059 141339 None code121 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 25 mm nominal OD pipes etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charge sand all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Rmtr 375.24 375.24 110.0 False None None False None False 41276.4 0 3760060 141339 None code122 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 20mm nominal OD pipes etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charge sand all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Rmtr 285.56 285.56 85.0 False None None False None False 24272.6 0 3760061 141339 None code123 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore etc.,with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 647.82 647.82 5.0 False None None False None False 3239.1 0 3760062 141339 None code124 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore, Horizontal etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 731.6 731.6 5.0 False None None False None False 3658.0 0 3760063 141339 None code125 Providing and placing on terrace, (at all floor levels) polyethylene water storage tanks IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting sand the base support for tank. etc.,with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charge sand all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work.for 1500 Ltrs No 15930.0 15930.0 1.0 False None None False None False 15930.0 0 3760064 141339 None code126 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern &C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 7052.86 7052.86 6.0 False None None False None False 42317.16 0 3760065 141339 None code127 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar tapsetc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 3636.76 3636.76 5.0 False None None False None False 18183.8 0 3760066 141339 None code128 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 8005.12 8005.12 4.0 False None None False None False 32020.48 0 3760067 141339 None code129 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc.,complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 361.08 361.08 5.0 False None None False None False 1805.4 0 3760068 141339 None code130 Providing and fixing 100 mm sand cast Iron grating for gully trap. etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 55.46 55.46 12.0 False None None False None False 665.52 0 3760069 141339 None code131 Providing and fixing brass bib cock of approved quality : 20 mm nominal boreetc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 359.9 359.9 20.0 False None None False None False 7198.0 0 3760070 141339 None code132 Providing and fixing brass stop cock of approved quality : 20 mm nominal bore etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 359.9 359.9 20.0 False None None False None False 7198.0 0 3760071 141339 None code133 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 g. ) etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 585.28 585.28 5.0 False None None False None False 2926.4 0 3760072 141339 None code134 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. etc.,with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 1439.6 1439.6 5.0 False None None False None False 7198.0 0 3760073 141339 None code135 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5) etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 6657.56 6657.56 6.0 False None None False None False 39945.36 0 3760074 141339 None code136 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :With common burnt clay (non modular) bricks of class designation 3.5etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 7408.04 7408.04 6.0 False None None False None False 44448.24 0 3760075 141339 None code137 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board, 510x1040 mm bowl depth 178 mm etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 5701.76 5701.76 2.0 False None None False None False 11403.52 0 3760076 141339 None code138 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete No 259.6 259.6 12.0 False None None False None False 3115.2 0 3760077 141339 None code139 Concealed Conduit System -Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary-19/20mm dia 2mm thick. m 77.88 77.88 200.0 False None None False None False 15576.0 0 3760078 141339 None code140 Concealed Conduit System -Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary- 25mm dia 2mm thick m 92.04 92.04 50.0 False None None False None False 4602.0 0 3760079 141339 None code141 Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary-19/20mm dia 2mm thick. m 80.24 80.24 150.0 False None None False None False 12036.0 0 3760080 141339 None code142 Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary-25mm dia 2mm thick -25mm dia 2mm thick. m 93.22 93.22 150.0 False None None False None False 13983.0 0 3760081 141339 None code143 Supplying and fixing of PVC casing and capping on the wall or ceilling using necessary materials like bends,junction box , elbows,screws at an interval of 300mm etc as required. 20mm size m 33.04 33.04 30.0 False None None False None False 991.2 0 3760082 141339 None code144 Supplying and fixing of PVC casing and capping on the wall or ceilling using necessary materials like bends,junction box , elbows,screws at an interval of 300mm etc as required. 25mm size m 41.3 41.3 20.0 False None None False None False 826.0 0 3760083 141339 None code145 Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely m 25.96 25.96 70.0 False None None False None False 1817.2 0 3760084 141339 None code146 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase& Neutral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated withsufficient loose length in a wood/PVC round block. complete for each outlet.-Short point upto 3Mtr from tapping point to out let via switch . Point 336.3 336.3 5.0 False None None False None False 1681.5 0 3760085 141339 None code147 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase& Neutral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated withsufficient loose length in a wood/PVC round block. complete for each outlet.-Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch. Point 464.92 464.92 6.0 False None None False None False 2789.52 0 3760086 141339 None code148 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase& Neutral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated withsufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out let via switch. Point 672.6 672.6 20.0 False None None False None False 13452.0 0 3760087 141339 None code149 supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall -1-2 way . Each 162.84 162.84 30.0 False None None False None False 4885.2 0 3760088 141339 None code150 supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall- 4-5 way . Each 208.86 208.86 25.0 False None None False None False 5221.5 0 3760089 141339 None code151 supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall- 6way . Each 259.6 259.6 20.0 False None None False None False 5192.0 0 3760090 141339 None code152 supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall- 8way . Each 307.98 307.98 8.0 False None None False None False 2463.84 0 3760091 141339 None code153 supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall- 10-12way Each 376.42 376.42 3.0 False None None False None False 1129.26 0 3760092 141339 None code154 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box.- 1-2 module Each 161.66 161.66 30.0 False None None False None False 4849.8 0 3760093 141339 None code155 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box.- 4 module Each 206.5 206.5 25.0 False None None False None False 5162.5 0 3760094 141339 None code156 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box.- 6 module Each 276.12 276.12 20.0 False None None False None False 5522.4 0 3760095 141339 None code157 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box.- 8 module Each 335.12 335.12 8.0 False None None False None False 2680.96 0 3760096 141339 None code158 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box.- 10-12 module Each 405.92 405.92 3.0 False None None False None False 1217.76 0 3760097 141339 None code159 Supplying and fixing superior quality of modular switch & connected acceessorie.s on existing modular switch plate as per IS 1293. 6Amps one way Switch. Each 120.36 120.36 6.0 False None None False None False 722.16 0 3760098 141339 None code160 Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293.- 6Amps two way Switch. Each 195.88 195.88 2.0 False None None False None False 391.76 0 3760099 141339 None code161 Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293.- 6Amps 3way socket. Each 201.78 201.78 24.0 False None None False None False 4842.72 0 3760100 141339 None code162 Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293. -Stepped Fan Regulator. Each 421.26 421.26 6.0 False None None False None False 2527.56 0 3760101 141339 None code163 Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293. - 6/16Amps One way switch. Each 212.4 212.4 12.0 False None None False None False 2548.8 0 3760102 141339 None code164 Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293. - 6/16Amps universal socket. Each 278.48 278.48 6.0 False None None False None False 1670.88 0 3760103 141339 None code165 Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293.- RJ 45/I.O outlet cat -6. Each 397.66 397.66 6.0 False None None False None False 2385.96 0 3760104 141339 None code166 Supplying and drawing UTP-CAT 6E LAN cable. Mtr 44.84 44.84 720.0 False None None False None False 32284.8 0 3760105 141339 None code167 Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 694 confirming to latest amemndments-1.5 Sqmm. Mtr 30.68 30.68 250.0 False None None False None False 7670.0 0 3760106 141339 None code168 Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 694 confirming to latest amemndments- 2.5 Sqmm. Mtr 49.56 49.56 1000.0 False None None False None False 49560.0 0 3760107 141339 None code169 Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 694 confirming to latest amemndments-4 Sqmm. Mtr 74.34 74.34 500.0 False None None False None False 37170.0 0 3760108 141339 None code170 Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 694 confirming to latest amemndments- 6Sqmm. Mtr 108.56 108.56 400.0 False None None False None False 43424.0 0 3760109 141339 None code171 Supplying and fixing cast Aluminium round or oblong type bulk head fitting with GI wire guard, glass cover with 9 watts 230V LED lamp. Each 1416.0 1416.0 6.0 False None None False None False 8496.0 0 3760110 141339 None code172 Supplying and fixing of .4 feet - PVC Batten with integrated LED tube 20/22.W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V at 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.-4 feet LED Fitting-20/22W Each 814.2 814.2 19.0 False None None False None False 15469.8 0 3760111 141339 None code173 Supplying and fixing of .2 feet - PVC Batten with integrated LED tube 20/22.W with high quality diffuser with Life of 25000 burning hours amd 70% lumen maintenance with CRI 80. Power Input: 220-240V at 50/60Hz & Power factor0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.-2 feet LED Fitting-9/10W Each 650.18 650.18 4.0 False None None False None False 2600.72 0 3760112 141339 None code174 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.-12" Sweep (300mm) Each 3503.42 3503.42 2.0 False None None False None False 7006.84 0 3760113 141339 None code175 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 834.26 834.26 2.0 False None None False None False 1668.52 0 3760114 141339 None code176 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS374 79 and also comply with IS1709 1984 with latest amendment, Rated voltage 220 V 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS374 79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminum Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt current , Air Delivery Fan Speed as per IS 374 1979 with latest amendment, 2 year manufacturer Warranty. 48 inch Sweep 5 Star (1200 mm) Each 3158.86 3158.86 6.0 False None None False None False 18953.16 0 3760115 141339 None code177 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 371.7 371.7 6.0 False None None False None False 2230.2 0 3760116 141339 None code178 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. Each 1145.78 1145.78 3.0 False None None False None False 3437.34 0 3760117 141339 None code179 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure II - Double Door 8 Way SP & N Each 2187.72 2187.72 3.0 False None None False None False 6563.16 0 3760118 141339 None code180 Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF095, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, HD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2x2 36 W Each 5372.54 5372.54 2.0 False None None False None False 10745.08 0 3760119 141339 None code181 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. - 8way VTPN DB Each 14873.9 14873.9 1.0 False None None False None False 14873.9 0 3760120 141339 None code182 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.- 100A MCCB -25KA-4Pole Each 10014.66 10014.66 1.0 False None None False None False 10014.66 0 3760121 141339 None code183 Supplying and fixing Miniature Circuit Breakers in existing MCB distribution boards using necessary fixing material and C type curve, indicator ON/OFF, energy cross -3 with short circuit breaking capacity of 10k and complete wiring as required confirming to IEC60898. 40Amps TPN MCB Each 3591.92 3591.92 4.0 False None None False None False 14367.68 0 3760122 141339 None code184 Supplying and fixing Miniature Circuit Breakers in existing MCB distribution boards using necessary fixing material and C type curve, indicator ON/OFF, energy cross -3 with short circuit breaking capacity of 10k and complete wiring as required confirming to IEC60898. 6-32A SP MCB Each 489.7 489.7 12.0 False None None False None False 5876.4 0 3760123 141339 None code185 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.- 12way SP & N DD -UPS and Inverter DB Each 2748.22 2748.22 1.0 False None None False None False 2748.22 0 3760124 141339 None code186 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16 SWG Sq CM 0.51 0.51 10000.0 False None None False None False 5100.0 0 3760125 141339 None code187 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C. Each 607.7 607.7 3.0 False None None False None False 1823.1 0 3760126 141339 None code188 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. Each 6731.9 6731.9 1.0 False None None False None False 6731.9 0 3760127 141339 None code189 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.-100A Each 815.38 815.38 3.0 False None None False None False 2446.14 0 3760128 141339 None code190 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipments on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should befilled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia Each 4141.8 4141.8 2.0 False None None False None False 8283.6 0 3760129 141339 None code191 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.- 40mm Mtr 531.0 531.0 10.0 False None None False None False 5310.0 0 3760130 141339 None code192 GI/Copper strips for grounding connections, using necessary fixing materials as required.-25x3mm GI strip Mtr 96.76 96.76 15.0 False None None False None False 1451.4 0 3760131 141339 None code193 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG GI Wire. Mtr 41.3 41.3 20.0 False None None False None False 826.0 0 3760132 141339 None code194 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.- 35 sqmm Each 21.24 21.24 8.0 False None None False None False 169.92 0 3760133 141339 None code195 Supplying and fixing of DANGER, NO-ADMISSION & NO SMOKING board made out of MS sheet metal with two coats of non corrosive enameled paint Caution/Danger Board Each 177.0 177.0 5.0 False None None False None False 885.0 0 3760134 141339 None code196 supplying and fixing metal fan box with round hook Each 138.06 138.06 6.0 False None None False None False 828.36 0 3760135 141339 None code197 Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS 1293. TV/Telephone socket Each 184.08 184.08 6.0 False None None False None False 1104.48 0 3760136 141339 None code198 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 pair Rmtr 24.78 24.78 210.0 False None None False None False 5203.8 0 3760137 141339 None code199 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 50 pair Each 744.58 744.58 1.0 False None None False None False 744.58 0 3760138 141339 None code200 Supplying & Fixing of switch mounting rack with power manager & cable manager. 4U with 450 mm depth Each 5772.56 5772.56 2.0 False None None False None False 11545.12 0 3760139 141339 None code201 Supplying & Fixing of Power strip Each 1719.26 1719.26 1.0 False None None False None False 1719.26 0 3760140 141339 None code202 Supplying fixing of Network Switches - 16port 10/100 switch Each 2891.0 2891.0 1.0 False None None False None False 2891.0 0 3760141 141339 None code203 Supplying and Fixing of Patch panel for LAN cabling 16 port 10/100 patch panel Each 3599.0 3599.0 1.0 False None None False None False 3599.0 0 3760142 141339 None code204 Supplying and Fixing of I/O socket with back box single I/O Each 578.2 578.2 6.0 False None None False None False 3469.2 0 3760143 141339 None code205 Supplying and Fixing of 2mtrs Cat6 Patch cable Each 303.26 303.26 10.0 False None None False None False 3032.6 0 3760144 141339 None code206 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.-1 KVA ON LINE UPS- ONE HOUR BACKUPS Each 27904.64 27904.64 1.0 False None None False None False 27904.64 0 3760145 141339 None code207 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.7 AH capacity Each 3847.98 3847.98 15.0 False None None False None False 57719.7 0 3760146 141339 None code208 Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. 1 KVA OFF LINE UPS (For lighting & Fan ) Each 17802.66 17802.66 1.0 False None None False None False 17802.66 0 3760147 141339 None code209 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.7 AH capacity Each 3847.98 3847.98 10.0 False None None False None False 38479.8 0 3760148 141339 None code210 Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/ IS10178 AWS having dimensions bottom ..... mm , top.... mm with 3 mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65 micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 6 m - Top 70 mm and Bottom 130 mm dia Each 13924.0 13924.0 3.0 False None None False None False 41772.0 0 3760149 141339 None code211 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for 94:1990 3C x 4 mm2 Each 202.96 202.96 100.0 False None None False None False 20296.0 0 3760150 141339 None code212 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facilitycertified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 70W Each 7070.56 7070.56 3.0 False None None False None False 21211.68 0 3760151 141339 None code213 UG Sump Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) rate including required form work.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc., complete with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Additionalities for Formwork, Centering & Scaffolding Cum 10015.19 10015.19 12.0 False None None False None False 120182.28 0 3760152 141339 None code214 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Kgs 75.52 75.52 177.0 False None None False None False 13367.04 0 3760153 141339 None code215 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc complete.1.00 HP/0.75KW 7 STG Each 15715.24 15715.24 1.0 False None None False None False 15715.24 0 3760154 141339 None code216 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5 Sqm m 100.3 100.3 45.0 False None None False None False 4513.5 0 3760155 141339 None code217 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete. Upto 3 HP pumps Each 7670.0 7670.0 1.0 False None None False None False 7670.0 0 3760156 141339 None code218 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. Each 1593.0 1593.0 1.0 False None None False None False 1593.0 0 3760157 141339 None code219 Providiing & laying Brick work with common burnt clay bricks of class designation 5.0 in mud mortar Cum 8075.92 8075.92 24.0 False None None False None False 193822.08 0 3760158 141339 None code220 Providiing & filling the Brick bats in the soak pit as per the drawings / specifications as directed by Engineer-In-Charge Cum 2242.0 2242.0 12.0 False None None False None False 26904.0 0 3760159 141339 None code221 Providing cast iron footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing complete as per specifications. No 354.0 354.0 7.0 False None None False None False 2478.0 0 3760160 141339 None code222 Providing and fixing 450mm W x 450mm D x 685mm Ht Mobile pedestal unit-Wooden with 18mm thick PLPB with edge bonded for body, Two equal drawer and one filing drawer with centralized locking system, Telescopic channels, castors, Handles and lock etc., complete as per specifications, drawings and as directed by Engineer in charge. PLY STORAGE- 900mmX430mmX750mm Cum 6938.4 6938.4 8.0 False None None False None False 55507.2 0 3760161 141339 None code223 STRAIGHT WORKSTATIONS (FRAME AND SEPARATOR) Providing and fixing STRAIGHT WORKSTATIONS consisting of BACK TO BACK unit made out of 75 mm thick MS CRCA powder coated, tile based system for main sprine, separator 25mm thick PLPB-BSL wooden separator for return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mm W) per work station, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway-one middle raceway (600 mm W) below table top per workstation and continous raceway at the skirting level, Wire manager - ABS plastic grommet one number per table, Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS powder coated corner bkt, cantilever bkt, separator hook on bkt, L bkt and Table joint plate., as per specifications, drawings and as directed by Engineer in charge. sharing workstation:1B) size: 1200mmWx540mmDx1200mm t(sharing work station with edge binding table top,back to back set of 2) Cum 35046.0 35046.0 1.0 False None None False None False 35046.0 0 3760162 141339 None code224 STRAIGHT WORKSTATIONS (FRAME AND SEPARATOR) Providing and fixing STRAIGHT WORKSTATIONS consisting of BACK TO BACK unit made out of 75 mm thick MS CRCA powder coated, tile based system for main sprine, separator 25mm thick PLPB-BSL wooden separator for return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mm W) per work station, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway-one middle raceway (600 mm W) below table top per workstation and continous raceway at the skirting level, Wire manager - ABS plastic grommet one number per table, Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS powder coated corner bkt, cantilever bkt, separator hook on bkt, L bkt and Table joint plate., as per specifications, drawings and as directed by Engineer in charge. non sharing workstation:1C) size: 1200mmWx600mmDx1200mm ht(non sharing work station with edge binding table top,single unit) Sqm 27966.0 27966.0 1.0 False None None False None False 27966.0 0 3760163 141339 None code225 Providing and fixing wooden storage unit one side laminated with 18mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with opeanable shutters and individual locking system for shutters 9mm PLY with edge bound for rear portion with hafele fitting hinges, hafele locks, minifix assembly, screw legs, handles and tower bolt. complete as per specification drawings and as directed by engineer incharge PLY STORAGE- 900mmx430mmx1200mm Sqm 13806.0 13806.0 6.0 False None None False None False 82836.0 0 3760164 141339 None code226 CUBICLE WORKSTATIONS Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated, tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mm W) per work station, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway-one middle raceway (600 mm W) below table top per workstation and continous raceway at the skirting level, Wire manager - ABS plastic grommet one number per table, Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS powder coated corner bkt, cantilever bkt, separator hook on bkt, L bkt and Table joint plate., as per specifications, drawings and as directed by Engineer in charge. T TYPE 2 wings 3 C) Size: 1500 mm W x 1200mm D x 1200 mm ht. Sqm 50905.2 50905.2 2.0 False None None False None False 101810.4 0 3760165 141339 None code227 do- L TYPE 1 wing 3 C) Size: 1500 mm W x 1200mm D x 1200 mm ht. Sqm 31081.2 31081.2 2.0 False None None False None False 62162.4 0 3760166 141339 None code228 do- Main Table: 1500 mm W x 750 mm D x 750 mm ht (Post formed table top) Side Table 900mm W x 450 mm D x 750 mm ht. Sqm 22729.75 22729.75 1.0 False None None False None False 22729.75 0 3760167 141339 None code229 FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin - without frames consisting of 25mm thick PLPB table top, 25mm thick PLPB with edge bomded End table, 18 mm thick PLPB with edge bonded Modesty, Wire manager - ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg, as per specifications, drawings and as directed by Engineer in charge. Main Table: 1800 mm W x 750 mm D x 750 mm ht (edgebinding table top) Side Table 900mm W x 450 mm D x 750 mm ht. Each 29786.15 29786.15 1.0 False None None False None False 29786.15 0 3760168 141339 None code230 Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading V Material etc., complete with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Cum 2934.66 2934.66 31.0 False None None False None False 90974.46 0 3760169 141339 None code231 Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) Sqm 1369.98 1369.98 152.0 False None None False None False 208236.96 0 3760170 141339 None code232 Earth work excavation by manual means for drains, canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Cum 219.48 219.48 36.0 False None None False None False 7901.28 0 3760171 141339 None code233 Procurement of farm yard manure /compost, sand and red earth (ingredients) required for raising seedlings inclusive of transportations, breaking of clods, sieving and heaping each ingredient separately at nursery site.(Ceiling rate). (c)Farm yard manure/compost Cum 1871.48 1871.48 18.0 False None None False None False 33686.64 0 3760172 141339 None code234 Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete Cum 3164.76 3164.76 2.0 False None None False None False 6329.52 0 3760173 141339 None code235 Grassing with Doobs grass. Grassing with Doobs grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed complete as per specifications. MORTH Specification No. 307 i) In rows 15 cm apart in either direction. Sqm 55.46 55.46 90.0 False None None False None False 4991.4 0 3760174 141339 None code236 Planting and Maintaining of Flowering Plants and Shrubs Planting and Maintaining of Flowering Plants and Shrubs - A) Planting flowring plants and shrubs in central verge MORTH Specification No. 307 Sqm 55.46 55.46 25.0 False None None False None False 1386.5 0 3760175 141339 None code237 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. of size 600 x 300 x 150 mm m 546.34 546.34 60.0 False None None False None False 32780.4 0 3760176 141339 None code238 Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. Cum 112.1 112.1 26.0 False None None False None False 2914.6 0 3760177 141339 None code239 Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge. Cum 7865.88 7865.88 16.5 False None None False None False 129787.02 0 3760178 141339 None code240 Extra for making chequers of approved pattern on 1:2:4 cement concrete floors, steps, landing, pavements etc. Sqm 64.9 64.9 102.0 False None None False None False 6619.8 0 3760179 141339 None code241 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 670.24 670.24 120.0 False None None False None False 80428.8 0 3760180 141339 None code242 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain m 532.18 532.18 20.0 False None None False None False 10643.6 0 3760181 141339 None code243 Providing and fixing precoated galvanised steel sheet roofingaccessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) m 1267.32 1267.32 40.0 False None None False None False 50692.8 0 3760182 141339 None code244 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner orSchlumbergers’s method, including reconnaissance survey of eological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of asing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, robable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test Each 6239.84 6239.84 1.0 False None None False None False 6239.84 0 3760183 141339 None code245 Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for Borewell depth of 0 to 50 m. m 436.6 436.6 50.0 False None None False None False 21830.0 0 3760184 141339 None code246 do-Borewell depth of 50.00 to 100.00 mtrs m 547.52 547.52 50.0 False None None False None False 27376.0 0 3760185 141339 None code247 do- Borewell depth of100.00 to 150.00 mtrs m 581.74 581.74 50.0 False None None False None False 29087.0 0 3760186 141339 None code248 do- Borewell depth of150.00 to 200.00 mtrs m 674.96 674.96 50.0 False None None False None False 33748.0 0 3760187 141339 None code249 do- Borewell depth of200.00 to 250.00 mtrs m 791.78 791.78 50.0 False None None False None False 39589.0 0 3760188 141339 None code250 do- Borewell depth of250.00 to 300.00 mtrs m 873.2 873.2 50.0 False None None False None False 43660.0 0 3760189 141339 None code251 Positioning of the rig for retrival of failed borewells, raising mast and aligning the hammer and drill rods moounded on the rotary head of the rig concentric with borewell of 140-149 mm dia. to be retrived (wherever further geo-physical investigation has revealed that the existing aquifer / aquifers have not been tapped to the full depth) including selection of the suitable bit for deepening etc. The cost is for the work of Each bore well. Each 3783.08 3783.08 1.0 False None None False None False 3783.08 0 3760190 141339 None code252 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical esistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty.Casing Pipe m 2280.94 2280.94 48.0 False None None False None False 109485.12 0 3760191 141339 None code253 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments No 177.0 177.0 8.0 False None None False None False 1416.0 0 3760192 141339 None code254 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge No 193.52 193.52 1.0 False None None False None False 193.52 0 3760193 141339 None code255 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 5.00 HP - 90 LPM @ 110 m = 15 STG Outlet Dia - 2.00inch No 37921.66 37921.66 1.0 False None None False None False 37921.66 0 3760194 141339 None code256 Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe:Heavy Duty GI pipe of 40mm dia m 587.64 587.64 120.0 False None None False None False 70516.8 0 3760195 141339 None code257 Providing wrought mild steel (galvanized) GI collar confirming to IS 1239II, 1991 with latest amendments if any.For 40 mm dia GI collar Each 243.08 243.08 20.0 False None None False None False 4861.6 0 3760196 141339 None code258 Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required etc. for:20.88.5: 32 mm nominal bore Each 355.18 355.18 1.0 False None None False None False 355.18 0 3760197 141339 None code259 Labour charges for Erection of new / repaired submersible pump set along with GI pipes (32mm / 50mm), cable (New submersible pump set if required will be supplied by the department free of cost and released pump set should be handed over to department) including transportation (Each length = 6 m) Job 220.66 220.66 20.0 False None None False None False 4413.2 0 3760198 141339 None code260 Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 40 mm dia GI elbow Each 243.08 243.08 1.0 False None None False None False 243.08 0 3760199 141339 None code261 Supply and delivery at site wrought middle steel (galvanized) GI socket confirming to IS 1239-II, 1991 with latest amendments if any.For 40 mm dia GI socket Each 260.78 260.78 2.0 False None None False None False 521.56 0 3760200 141339 None code262 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm No 1475.0 1475.0 1.0 False None None False None False 1475.0 0 3760201 141339 None code263 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x4 m2 m 159.3 159.3 170.0 False None None False None False 27081.0 0 3760202 141339 None code264 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S-D- Star Delta Starter Upto 6 HP pumps Each 11210.0 11210.0 1.0 False None None False None False 11210.0 0 3760203 141339 None code265 Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark Set 5310.0 5310.0 1.0 False None None False None False 5310.0 0 3760204 141339 None code266 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Job 7670.0 7670.0 1.0 False None None False None False 7670.0 0 3760205 141339 None code267 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. Job 1593.0 1593.0 1.0 False None None False None False 1593.0 0 3760206 141339 None code268 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work. 3.5x 10 sqmm m 230.1 230.1 16.0 False None None False None False 3681.6 0 3760207 141339 None code269 Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit m 159.3 159.3 16.0 False None None False None False 2548.8 0 3760208 141339 None code270 Providing,Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work.3.5x10 Sqm Each 531.0 531.0 1.0 False None None False None False 531.0 0 3760209 141339 None code271 Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia Job 4425.0 4425.0 1.0 False None None False None False 4425.0 0 3760210 141339 None code272 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. m 571.12 571.12 16.0 False None None False None False 9137.92 0 3760211 141339 None code273 Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work)40mm nominal OD pipes m 562.86 562.86 35.0 False None None False None False 19700.1 0 3760212 141339 None code274 Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials,perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete.(Contractorwill make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey.RCC NP3 Class pipe of 300 mm dia Rmtr 1571.76 1571.76 25.0 False None None False None False 39294.0 0 3760213 141339 None code275 Laying, Lowering and jointing of S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class ,rolling and lowering into trenches, laying true to line and level at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing).RCC NP3 Class pipe of 300 mm dia Rmtr 295.0 295.0 25.0 False None None False None False 7375.0 0 3760214 141339 None code276 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover etc., with all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation charges, loading and unloading charges and all other incidental charges etc., complete as per standard technical detailed specification and directions of the Engineer in charge of the work. No 6435.72 6435.72 4.0 False None None False None False 25742.88 0 3760215 141339 None code277 Structural designs including structural drawings complete as per standard technical detailed specification and directions of the Engineer in charge of the work. Job 149860.0 149860.0 1.0 False None None False None False 149860.0 0 3760216 141339 None code278 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.-600mm x 600mm x170mm Each 17133.6 17133.6 1.0 False None None False None False 17133.6 0 3760217 141339 None code279 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and CType curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. ( 6-32A SP MCB ) Each 489.7 489.7 10.0 False None None False None False 4897.0 0 3760218 141339 None code280 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.( 32-40A 2 pole) Each 5379.62 5379.62 1.0 False None None False None False 5379.62 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1723464094000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1723464094000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1723464094000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1723464094000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1723464094000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1723464150000 0 None None ELIGIBILITY The rates quoted shall include provision for payment of EPF, ESI and Employees welfare cess as per prevailing GOK Act. None 1723464163000 0 None None ELIGIBILITY The Contractor should quote the item wise rates Inclusive of GST. None 1723464174000 0 None None ELIGIBILITY The contractor shall quote item wise rates in the tender and the same shall holds good till the works are completed. The rates should include provision for payment of all Taxes, Royalty or any other such taxes due to the Corporation/Government notified by the Government time to time. None 1723464193000 0 None None ELIGIBILITY The rates quoted should be inclusive of all leads and lifts for materials etc. The Bidder should visit the work spot at his own cost before quoting his rates. None 1723464208000 0 None None ELIGIBILITY The contractor shall obtain the necessary licence, permission and approved plan on construction of building from the concerned competent authority and local authority if required. Any such charges should be paid by the successful bidder and the same amount will be reimbursed by the BESCOM at later stage. None 1723464218000 0 None None ELIGIBILITY Bidders shall produce the original documents uploaded in the KPPP Portal without fail on demand from the BESCOM, the original documents not matching with the uploaded documents shall be liable to rejection. None 1723464227000 0 None None ELIGIBILITY No materials will be supplied departmentally. The Bidder has to make his own arrangement for procurement of required materials, arranging Electricity, Water supply etc. to complete the work. None 1723464237000 0 None None ELIGIBILITY The rates/prices quoted by the Bidder shall be firm and no price variation will be admitted. None 1723464247000 0 None None ELIGIBILITY Quantities given in the notification and schedule are approximate and are liable to vary. None 1723464255000 0 None None ELIGIBILITY The Bids shall remain valid for a period of 90 days from the date of opening of Bid. None 1723464267000 0 None None ELIGIBILITY Conditional Bid is liable for rejection without assigning any reasons. None 1723464280000 0 None None ELIGIBILITY The successful Bidder shall bind himself to abide by the rules and specifications in force and shall execute the necessary agreement on stamp paper within seven days from the date of intimation of acceptance of his Bid, failing which, his Bid will be cancelled unconditionally and his EMD will be forfeited. In addition they would also be responsible for making good the extra expenditure that would be incurred in inviting fresh Bids for the work. None 1723464290000 0 None None ELIGIBILITY The EMD of the successful bidder will be discharged when the bidder has signed the Agreement and furnished the required Performance Security. None 1723464302000 0 None None ELIGIBILITY Within 20 days of the receipt of the letter of Intent, the successful bidder shall deliver to the Chief Engineer(Ele.), O&M Zone, BESCOM, Chitradurga a security deposit for an amount equivalent to 5% of the contract price (BG/FDR in favour of the Chief Engineer(Ele.), O&M Zone, BESCOM, Chitradurga payable at Chitradurga). None 1723464312000 0 None None ELIGIBILITY The bidder shall deliver to the Chief Engineer (Ele.), O&M Zone, BESCOM, Chitradurga an additional security for unbalanced tenders (If the bidder quoted his lesser rates compared to the amount put to tender) in accordance with Clause 25.5 of ITT & Clause 44 of the conditions of contract for all works (BG/FDR in favour of the Chief Engineer(Ele.), O&M Zone, BESCOM, Chitradurga payable at Chitradurga). None 1723464332000 0 None None ELIGIBILITY In case if the bidder intents to quote for more than one work, the capability of the bidder shall be evaluated based on the cumulative financial requirement of all the works quoted. The works will be considered for eligibility, according to serial numbers. For example, if the bidder suffices in two works in the lot as per his financial capability, the works in Sl.no 1 and Sl.no. 2 are considered. Hence, the bidder shall scrupulously quote for the works depending upon his financial capability as above. Otherwise all his quoted bids will be liable for rejection forthwith. None 1723464346000 0 None None ELIGIBILITY The work should not be sub-let. None 1723464358000 0 None None ELIGIBILITY The E.M.D. furnished by the unsuccessful bidders will be refunded within 30 days of the end of the tender validity period. None 1723464376000 0 None None ELIGIBILITY If the work is not completed and handed over within the agreement period, a penalty of 1 present or such smaller amount as the Chief Engineer(Ele.) or the other competent authorities (whose decision in writing shall be final) may decide for every day that the work remains uncommenced or unfinished after the agreement period, provided always that the total amount of penalty to be paid under the provision of this clause shall not exceed 7.5% of the total cost of the work as shown in the tender. None 1723464396000 0 None None ELIGIBILITY The Bidder has to pay compensation to the disabled or deceased workmen under him for any injury or death caused during the execution of works, failing which the necessary amount will be deducted from the bills and paid to the injured or deceased. None 1723464409000 0 None None ELIGIBILITY The Bidder shall submit a PERT CHART indicating date wise programme chalked out to commence all the construction activities against time schedule given and it should be got approved by the Competent authority before commencement of work. It is required for periodical review of progress of work. None 1723464422000 0 None None ELIGIBILITY Time is the essence of contract and the extension to the stipulated period of completion will not be accorded except under unavoidable circumstances. The Bidder has to arrange sufficient men, machinery and materials so that the work can be completed within the stipulated time. None 1723464428000 0 None None ELIGIBILITY BESCOM reserves the right to reject or accept any of the tenders without assigning any reasons. None 1723464442000 0 None None ELIGIBILITY For more details, refer attached NIT. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None The bidder should have carried Construction of RCC Building Work (original nature) of value not less than 50% of the amount put to tender (Rs.75.00 Lakhs) and completed satisfactorily within stipulated time period in any of the Government/Public Sector Undertaking in any one year of the preceding five financial years viz., 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23. The satisfactory completion certificate issued by competent authority should not be below the rank of Executive Engineer or Equivalent. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The bidder should have carried out the following quantities in any one year of the preceding five financial years. The satisfactory completion certificate issued by competent authority should not be below the rank of Executive Engineer or Equivalent. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- quantity workdone certificate None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrification works and should have executed similar electrical works totalling Rs. 3.60 lakhs any one year of past five years, Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Eelctrical work done None None None None Bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The bidder shall upload his tender capacity calculation in his letter head along with date and signature with Seal.The available tender capacity will be calculated as under Assessed Available Tender Capacity is (AxNx1.5-B) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Tender capacity calculation sheet None None None None The annual turnover of the bidder shall not be less than two times the estimated annual payments Rs.327.27 lakhs per year in any two of the previous 5 financial years (2019-20, 2020-21, 2021-22, 2022-23 & 2023-24). Turnover certificate along with Balance sheet and P & L statements of any TWO of the previous 5 financial years for the Civil Engineering works only (i.e.2019-20 to 2023-24) issued from a Registered Chartered Accountant (Registered Chartered Accountant PIN must be mentioned) should be uploaded. For the certificates, UDIN is mandatory. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None the credit facility issued by any Indian Nationalized Bank/Scheduled Bank (enjoying credit facility) shall be more or equivalent of the estimated cash flow for three months in peak construction period Rs.40.90 Lakhs. The original credit facility certificate (Bankers certificate as per uploaded format) issued by any Nationalized Bank/Scheduled Indian Bank addressed to the Chief Engineer Electy., CTAZ, BESCOM, Opp. RTO Office, Turuvanur Road, Chitradurga-577 501 shall be scanned and uploaded. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and CA reports for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None The bidder shall possess valid GST registration number.The original GST Certificate shall be scanned and uploaded. Others GST registration certificate createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None The bidder shall be a Registered KPWD Civil contractor of Class-III and above. The valid original License shall be scanned and uploaded Others KPWD License createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV)
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate issued by CA True Technical Bid Company Registration Certificate False Technical Bid Bankers Certificate True Technical Bid Self Declaration Certificate True Technical Bid KPWD Licence True Technical Bid Tender Capacity Calculation Sheet True Technical Bid Workdone certificate True Technical Bid Electrical license True Technical Bid Electrical workdone certificate True Technical Bid Quantity workdone certificate True Technical Bid GST registration certificate True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1723465605000 version 0 createdDate None modifiedDate None blockNumber Office of Chief Engineer(ELe), Zonal office, BESCOM, opp to RTO office, Chitradurga street None city Chitradurga state Karnataka pin 577501
tenderRecallDTO	None