| 3763653 | 141583 | None | code01 | Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work In Hard Rock ( requiring blasting) Depth upto 1.50m. | Sqm | 673.33 | 673.33 | 85.0 | False | None | None | False | None | False | 57233.05 | 0 |
| 3763654 | 141583 | None | code02 | Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete in the following strata. Ordinary/soft rock (without requiring blasting). | Cum | 551.79 | 551.79 | 73.0 | False | None | None | False | None | False | 40280.67 | 0 |
| 3763655 | 141583 | None | code03 | Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth. | Cum | 439.97 | 439.97 | 62.0 | False | None | None | False | None | False | 27278.14 | 0 |
| 3763656 | 141583 | None | code04 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. If the height of embankment construction is more than 1.50 m add 5% per cum for every 1.50 m height or part there of | Cum | 576.1 | 576.1 | 180.0 | False | None | None | False | None | False | 103698.0 | 0 |
| 3763657 | 141583 | None | code05 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6884.03 | 6884.03 | 95.0 | False | None | None | False | None | False | 653982.85 | 0 |
| 3763658 | 141583 | None | code06 | Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge | Sqm | 972.32 | 972.32 | 251.0 | False | None | None | False | None | False | 244052.32 | 0 |
| 3763659 | 141583 | None | code07 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Footing | Cum | 8252.52 | 8252.52 | 14.0 | False | None | None | False | None | False | 115535.28 | 0 |
| 3763660 | 141583 | None | code08 | do-Column | Cum | 12990.07 | 12990.07 | 10.5 | False | None | None | False | None | False | 136395.735 | 0 |
| 3763661 | 141583 | None | code09 | do-Lintels | Cum | 12225.95 | 12225.95 | 2.0 | False | None | None | False | None | False | 24451.9 | 0 |
| 3763662 | 141583 | None | code10 | do-Beams | Cum | 12225.95 | 12225.95 | 17.0 | False | None | None | False | None | False | 207841.15 | 0 |
| 3763663 | 141583 | None | code11 | do- retaining wall | Cum | 11461.83 | 11461.83 | 11.5 | False | None | None | False | None | False | 131811.045 | 0 |
| 3763664 | 141583 | None | code12 | Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge. | Cum | 8101.86 | 8101.86 | 3.5 | False | None | None | False | None | False | 28356.51 | 0 |
| 3763665 | 141583 | None | code13 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density | Cum | 3110.21 | 3110.21 | 48.0 | False | None | None | False | None | False | 149290.08 | 0 |
| 3763666 | 141583 | None | code14 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1592.17 | 1592.17 | 108.0 | False | None | None | False | None | False | 171954.36 | 0 |
| 3763667 | 141583 | None | code15 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Scaffolding charges added. ( For Chejja concrete) | Cum | 11079.77 | 11079.77 | 1.0 | False | None | None | False | None | False | 11079.77 | 0 |
| 3763668 | 141583 | None | code16 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in ement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 13341.45 | 13341.45 | 48.0 | False | None | None | False | None | False | 640389.6 | 0 |
| 3763669 | 141583 | None | code17 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Sqm | 1219.05 | 1219.05 | 13.0 | False | None | None | False | None | False | 15847.65 | 0 |
| 3763670 | 141583 | None | code18 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. | Tonne | 108726.04 | 108726.04 | 2.9 | False | None | None | False | None | False | 315305.516 | 0 |
| 3763671 | 141583 | None | code19 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. | Kgs | 204.19 | 204.19 | 185.0 | False | None | None | False | None | False | 37775.15 | 0 |
| 3763672 | 141583 | None | code20 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. | Kgs | 178.66 | 178.66 | 1490.0 | False | None | None | False | None | False | 266203.4 | 0 |
| 3763673 | 141583 | None | code21 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 690.35 | 690.35 | 240.0 | False | None | None | False | None | False | 165684.0 | 0 |
| 3763674 | 141583 | None | code22 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 450.91 | 450.91 | 570.0 | False | None | None | False | None | False | 257018.7 | 0 |
| 3763675 | 141583 | None | code23 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge | Sqm | 392.57 | 392.57 | 210.0 | False | None | None | False | None | False | 82439.7 | 0 |
| 3763676 | 141583 | None | code24 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 3200.15 | 3200.15 | 13.0 | False | None | None | False | None | False | 41601.95 | 0 |
| 3763677 | 141583 | None | code25 | Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Nos | 489.81 | 489.81 | 4.0 | False | None | None | False | None | False | 1959.24 | 0 |
| 3763678 | 141583 | None | code26 | wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations the which ever parts unserviceable should be replace (Springs, wheels, Shaft & replace the leafs which corroded) new one with all necessary including cost of materials, labour, complete as per specifications including cost of all materials, with all lead | m | 611.35 | 611.35 | 3.5 | False | None | None | False | None | False | 2139.725 | 0 |
| 3763679 | 141583 | None | code27 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 430.25 | 430.25 | 55.0 | False | None | None | False | None | False | 23663.75 | 0 |
| 3763680 | 141583 | None | code28 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 2005.41 | 2005.41 | 40.0 | False | None | None | False | None | False | 80216.4 | 0 |
| 3763681 | 141583 | None | code29 | Providing and fixing Pre-Cast concrete Soak pit rings | Nos | 1180.0 | 1180.0 | 6.0 | False | None | None | False | None | False | 7080.0 | 0 |
| 3763682 | 141583 | None | code30 | Providing and fixing Pre-Cast concrete Soak pit Cover | Nos | 1416.0 | 1416.0 | 1.0 | False | None | None | False | None | False | 1416.0 | 0 |
| 3763683 | 141583 | None | code31 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m2 over and including one coat of Special primer applied @ 0.75 L/10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) | Sqm | 192.03 | 192.03 | 575.0 | False | None | None | False | None | False | 110417.25 | 0 |
| 3763684 | 141583 | None | code32 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m2 over an under coat of primer applied @ 0.80 ltr/10 m2 of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 168.94 | 168.94 | 65.0 | False | None | None | False | None | False | 10981.1 | 0 |
| 3763685 | 141583 | None | code33 | Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete | Kgs | 170.16 | 170.16 | 250.0 | False | None | None | False | None | False | 42540.0 | 0 |
| 3763686 | 141583 | None | code34 | Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 32 mm dia 2.5 mm thick | Mtr | 125.08 | 125.08 | 60.0 | False | None | None | False | None | False | 7504.8 | 0 |
| 3763687 | 141583 | None | code35 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 10C x 4 mm2 | Mtr | 574.66 | 574.66 | 40.0 | False | None | None | False | None | False | 22986.4 | 0 |
| 3763688 | 141583 | None | code36 | do- 10C x 2.5 mm | Mtr | 506.22 | 506.22 | 20.0 | False | None | None | False | None | False | 10124.4 | 0 |
| 3763689 | 141583 | None | code37 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall | Mtr | 34.22 | 34.22 | 300.0 | False | None | None | False | None | False | 10266.0 | 0 |
| 3763690 | 141583 | None | code38 | Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 25 mm | Mtr | 25.96 | 25.96 | 60.0 | False | None | None | False | None | False | 1557.6 | 0 |
| 3763691 | 141583 | None | code39 | Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14 mm M.S. rod | No | 188.8 | 188.8 | 20.0 | False | None | None | False | None | False | 3776.0 | 0 |
| 3763692 | 141583 | None | code40 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose ength in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box | Point | 317.42 | 317.42 | 30.0 | False | None | None | False | None | False | 9522.6 | 0 |
| 3763693 | 141583 | None | code41 | do- Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box | Point | 447.22 | 447.22 | 50.0 | False | None | None | False | None | False | 22361.0 | 0 |
| 3763694 | 141583 | None | code42 | do- Long point above 6Mtr upto 10Mtr from tapping point to out let vias witch box | Point | 654.9 | 654.9 | 70.0 | False | None | None | False | None | False | 45843.0 | 0 |
| 3763695 | 141583 | None | code43 | do-Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches | Point | 798.86 | 798.86 | 8.0 | False | None | None | False | None | False | 6390.88 | 0 |
| 3763696 | 141583 | None | code44 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010 1.5 mm | Mtr | 30.68 | 30.68 | 1100.0 | False | None | None | False | None | False | 33748.0 | 0 |
| 3763697 | 141583 | None | code45 | do- 2.5 mm | Mtr | 49.56 | 49.56 | 1800.0 | False | None | None | False | None | False | 89208.0 | 0 |
| 3763698 | 141583 | None | code46 | do- 4 sqmm | Mtr | 74.34 | 74.34 | 300.0 | False | None | None | False | None | False | 22302.0 | 0 |
| 3763699 | 141583 | None | code47 | do- 6 sqmm | Mtr | 108.56 | 108.56 | 75.0 | False | None | None | False | None | False | 8142.0 | 0 |
| 3763700 | 141583 | None | code48 | Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 4 mm2 | Mtr | 198.24 | 198.24 | 30.0 | False | None | None | False | None | False | 5947.2 | 0 |
| 3763701 | 141583 | None | code49 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3 Way | Each | 187.62 | 187.62 | 15.0 | False | None | None | False | None | False | 2814.3 | 0 |
| 3763702 | 141583 | None | code50 | do- 4-5 Way | Each | 208.86 | 208.86 | 15.0 | False | None | None | False | None | False | 3132.9 | 0 |
| 3763703 | 141583 | None | code51 | do- 8 Way | Each | 307.98 | 307.98 | 30.0 | False | None | None | False | None | False | 9239.4 | 0 |
| 3763704 | 141583 | None | code52 | do- 10-12 Way | Each | 376.42 | 376.42 | 25.0 | False | None | None | False | None | False | 9410.5 | 0 |
| 3763705 | 141583 | None | code53 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module | Each | 161.66 | 161.66 | 15.0 | False | None | None | False | None | False | 2424.9 | 0 |
| 3763706 | 141583 | None | code54 | do- 4 Module | Each | 206.5 | 206.5 | 15.0 | False | None | None | False | None | False | 3097.5 | 0 |
| 3763707 | 141583 | None | code55 | do- 8 Module | Each | 335.12 | 335.12 | 30.0 | False | None | None | False | None | False | 10053.6 | 0 |
| 3763708 | 141583 | None | code56 | do- 10-12 Module | Each | 405.92 | 405.92 | 25.0 | False | None | None | False | None | False | 10148.0 | 0 |
| 3763709 | 141583 | None | code57 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch | Each | 120.36 | 120.36 | 125.0 | False | None | None | False | None | False | 15045.0 | 0 |
| 3763710 | 141583 | None | code58 | do- 6 Amps Two way switch | Each | 195.88 | 195.88 | 10.0 | False | None | None | False | None | False | 1958.8 | 0 |
| 3763711 | 141583 | None | code59 | do- 6A Three Way socket | Each | 201.78 | 201.78 | 60.0 | False | None | None | False | None | False | 12106.8 | 0 |
| 3763712 | 141583 | None | code60 | do- Stepped Fan Regulator Two Module | Each | 421.26 | 421.26 | 20.0 | False | None | None | False | None | False | 8425.2 | 0 |
| 3763713 | 141583 | None | code61 | do- 6/16A Universal Socket | Each | 278.48 | 278.48 | 6.0 | False | None | None | False | None | False | 1670.88 | 0 |
| 3763714 | 141583 | None | code62 | Supplying, fixing and wiring Residual current circuit breaker (RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole | Each | 6543.1 | 6543.1 | 4.0 | False | None | None | False | None | False | 26172.4 | 0 |
| 3763715 | 141583 | None | code63 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP | Each | 489.7 | 489.7 | 27.0 | False | None | None | False | None | False | 13221.9 | 0 |
| 3763716 | 141583 | None | code64 | do- 6-32Amps DP | Each | 872.02 | 872.02 | 8.0 | False | None | None | False | None | False | 6976.16 | 0 |
| 3763717 | 141583 | None | code65 | do- 50-63 A DP | Each | 1300.36 | 1300.36 | 2.0 | False | None | None | False | None | False | 2600.72 | 0 |
| 3763718 | 141583 | None | code66 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 12 Way SP & N | Each | 2198.34 | 2198.34 | 5.0 | False | None | None | False | None | False | 10991.7 | 0 |
| 3763719 | 141583 | None | code67 | Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 20/22 W | Each | 814.2 | 814.2 | 75.0 | False | None | None | False | None | False | 61065.0 | 0 |
| 3763720 | 141583 | None | code68 | do- LED light fitting 1 x 2' - 9/10W | Each | 650.18 | 650.18 | 10.0 | False | None | None | False | None | False | 6501.8 | 0 |
| 3763721 | 141583 | None | code69 | Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast extruded aluminum housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy100 lumen per W, 120degree beam spread, life25000 burning hours and Compliance to IS 10322/IEC 60598,LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly with PF 0.95 power loss should 5% of lamp Wage short circuit & open circuit protection to be integrated in the circuit, THD less than 20% Life as per LM 79. The operating input voltage should be between 130 to 275 V BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any
manufacturing defect working under standard electrical condition. LED modular down light 1x1 feet 24Watt | Each | 4356.56 | 4356.56 | 6.0 | False | None | None | False | None | False | 26139.36 | 0 |
| 3763722 | 141583 | None | code70 | do-LED modular down light 1'x1' / 34 -22watt | Each | 4356.56 | 4356.56 | 4.0 | False | None | None | False | None | False | 17426.24 | 0 |
| 3763723 | 141583 | None | code71 | do-LED modular down light 10-12watt | Each | 1497.42 | 1497.42 | 12.0 | False | None | None | False | None | False | 17969.04 | 0 |
| 3763724 | 141583 | None | code72 | Supply of LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical ompartment & impact resistance of complete luminaire IK08. Power Factor 0.9 withmains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598,LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB.Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned 70watt | Each | 7070.56 | 7070.56 | 4.0 | False | None | None | False | None | False | 28282.24 | 0 |
| 3763725 | 141583 | None | code73 | Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top.... mm with 3 mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended 5 m - Top 70 mm and Bottom 130 mm dia | Each | 11682.0 | 11682.0 | 1.0 | False | None | None | False | None | False | 11682.0 | 0 |
| 3763726 | 141583 | None | code74 | Using 2 m long 19mm 18 SWG enamelled braised conduit of two nos. rod pendent with ball socket with check nuts all nickelplated | Each | 672.6 | 672.6 | 2.0 | False | None | None | False | None | False | 1345.2 | 0 |
| 3763727 | 141583 | None | code75 | Supplying and fixing cast Aluminium round or oblong type bulk head fitting with GI wire guard, glass cover with 12/15 watts 230V LED lamp. | Each | 1416.0 | 1416.0 | 8.0 | False | None | None | False | None | False | 11328.0 | 0 |
| 3763728 | 141583 | None | code76 | supplying and fixing metal fan box with round hook | Each | 138.06 | 138.06 | 12.0 | False | None | None | False | None | False | 1656.72 | 0 |
| 3763729 | 141583 | None | code77 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps On wall/ ceiling / Rafter / Girders | Each | 143.96 | 143.96 | 30.0 | False | None | None | False | None | False | 4318.8 | 0 |
| 3763730 | 141583 | None | code78 | Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiringusing suitable capacity wires | Each | 672.6 | 672.6 | 4.0 | False | None | None | False | None | False | 2690.4 | 0 |
| 3763731 | 141583 | None | code79 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model | Each | 3521.12 | 3521.12 | 12.0 | False | None | None | False | None | False | 42253.44 | 0 |
| 3763732 | 141583 | None | code80 | Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together supplying and fixing a 5 amps ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. | Each | 201.78 | 201.78 | 12.0 | False | None | None | False | None | False | 2421.36 | 0 |
| 3763733 | 141583 | None | code81 | Extra length of GI pipe of class B 19mm dia for down rod | Mtr | 232.46 | 232.46 | 12.0 | False | None | None | False | None | False | 2789.52 | 0 |
| 3763734 | 141583 | None | code82 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply | Each | 1760.56 | 1760.56 | 4.0 | False | None | None | False | None | False | 7042.24 | 0 |
| 3763735 | 141583 | None | code83 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire | Each | 580.56 | 580.56 | 4.0 | False | None | None | False | None | False | 2322.24 | 0 |
| 3763736 | 141583 | None | code84 | EB - METER BOARD :- Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.-600mm x 600mm x 170mm. | Each | 17133.6 | 17133.6 | 2.0 | False | None | None | False | None | False | 34267.2 | 0 |
| 3763737 | 141583 | None | code85 | EARTHING:-Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit.The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia | No | 4141.8 | 4141.8 | 3.0 | False | None | None | False | None | False | 12425.4 | 0 |
| 3763738 | 141583 | None | code86 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and uitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. | No | 5022.08 | 5022.08 | 2.0 | False | None | None | False | None | False | 10044.16 | 0 |
| 3763739 | 141583 | None | code87 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.- 50mm dia | Mtr | 531.0 | 531.0 | 15.0 | False | None | None | False | None | False | 7965.0 | 0 |
| 3763740 | 141583 | None | code88 | Supplying & Fixing of 250W/400W High Pressure Sodium Vapour tubular Lamp with Xenon filled gas with luminous efficiency of greater than 140 lumen/W or initial lumens of greater than 55000 lumens & avg rated life greater than26000 hrs & minimum starting temperature of(-)40 deg C& Hot restrike time 60 Sec with CCT 2000K Operating voltage range from 180V to 265V, 50Hz AC power Supply | No | 2093.32 | 2093.32 | 3.0 | False | None | None | False | None | False | 6279.96 | 0 |
| 3763741 | 141583 | None | code89 | Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. | Sq CM | 0.59 | 0.59 | 15000.0 | False | None | None | False | None | False | 8850.0 | 0 |
| 3763742 | 141583 | None | code90 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440 VAC 50Hz 12/24D.C | Each | 607.7 | 607.7 | 8.0 | False | None | None | False | None | False | 4861.6 | 0 |
| 3763743 | 141583 | None | code91 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. | Each | 473.18 | 473.18 | 4.0 | False | None | None | False | None | False | 1892.72 | 0 |
| 3763744 | 141583 | None | code92 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy | Each | 10991.7 | 10991.7 | 1.0 | False | None | None | False | None | False | 10991.7 | 0 |