| 1723486244000 | 0 | None | None | Buildings | Construction of Hi-tech toilet work in Govt Higher Primary School of Vitalapaura village under Bada GP Davanagere. | 219860.7 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3762289 | 141472 | None | ITEM01 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (PWD SR 2023-24 VOL-2 I.No 9.39 P.No 65) | Sqm | 1449.0 | 1449.0 | 60.32 | False | None | None | False | None | False | 87403.68 | 0 | | 3762290 | 141472 | None | ITEM02 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). (PWD SR 2021-22 VOL-2 I.No 11.11.1 P.No 79) | Kg | 148.0 | 148.0 | 45.36 | False | None | None | False | None | False | 6713.28 | 0 | | 3762291 | 141472 | None | ITEM03 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge (PWD SR 2021-22 VOL-2 I.No 11.30.1 P.No 85) | Sqm | 912.0 | 912.0 | 2.16 | False | None | None | False | None | False | 1969.92 | 0 | | 3762292 | 141472 | None | ITEM04 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.(PWD SR 2023-24 P.NO. 104 I.NO 12.54 V-2) | m | 318.0 | 318.0 | 24.0 | False | None | None | False | None | False | 7632.0 | 0 | | 3762293 | 141472 | None | ITEM05 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.-do- with both side prelam (PWD SR 2023-24 P.NO. 104 I.NO 12.55.1 V-2) | m | 2366.0 | 2366.0 | 7.56 | False | None | None | False | None | False | 17886.96 | 0 | | 3762294 | 141472 | None | ITEM06 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR 2021-22 VOL-2 I.No 11.5.1 P.No 77) | Sqm | 4478.0 | 4478.0 | 5.04 | False | None | None | False | None | False | 22569.12 | 0 | | 3762295 | 141472 | None | ITEM07 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 VOL-2 I.No 8.25 P.No 45) | Sqm | 137.0 | 137.0 | 76.98 | False | None | None | False | None | False | 10546.26 | 0 | | 3762296 | 141472 | None | ITEM08 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 VOL-2 I.No 8.31 P.No 46) | Sqm | 178.0 | 178.0 | 59.46 | False | None | None | False | None | False | 10583.88 | 0 | | 3762297 | 141472 | None | ITEM09 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2021-22 VOL-2 I.No 8.40 P.No 48) | Sqm | 115.0 | 115.0 | 15.84 | False | None | None | False | None | False | 1821.6 | 0 | | 3762298 | 141472 | None | ITEM10 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (PWD SR 2023-24 VOL-2 I.No 14.3.1 P.No 131) | Each | 5977.0 | 5977.0 | 4.0 | False | None | None | False | None | False | 23908.0 | 0 | | 3762299 | 141472 | None | ITEM11 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively (PWD SR 2023-24 VOL-2 I.No 14.23 P.No 135 ) | Each | 1154.0 | 1154.0 | 2.0 | False | None | None | False | None | False | 2308.0 | 0 | | 3762300 | 141472 | None | ITEM12 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (PWD SR 2023-24 VOL-2 I.No 14.7.2 P.No 132 ) | Each | 2561.0 | 2561.0 | 2.0 | False | None | None | False | None | False | 5122.0 | 0 | | 3762301 | 141472 | None | ITEM13 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:PVC pipes 63 mm dia., 6 kg/sqcm & class 3 (PWD SR 2023-24 VOL-5 I.No 10.1.4 P.No 113 ) | Rmtr | 161.0 | 161.0 | 15.0 | False | None | None | False | None | False | 2415.0 | 0 | | 3762302 | 141472 | None | ITEM14 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:PVC pipes 110mm dia., 6 kg/sqcm & class 3 (PWD SR 2023-24 VOL-5 I.No 10.1.7 P.No 113 ) | Rmtr | 411.0 | 411.0 | 15.0 | False | None | None | False | None | False | 6165.0 | 0 | | 3762303 | 141472 | None | ITEM15 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (PWD SR 2023-24 VOL-2 I.No 13.34 P.No 123) | Ltr | 9.0 | 9.0 | 1000.0 | False | None | None | False | None | False | 9000.0 | 0 | | 3762304 | 141472 | None | ITEM16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes (PWD SR 2023-24 VOL-2 I.No 13.31.3 P.No 122 ) | Rmtr | 318.0 | 318.0 | 12.0 | False | None | None | False | None | False | 3816.0 | 0 |
|