createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724063300020 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 500.00 emd 26838.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 05-09-2024 17:30:00 tenderQueryClose 21-08-2024 11:00:00 technicalBidOpen 09-09-2024 11:00:00 publishedDate 19-08-2024 17:27:26 publishedByPost TMC_CO_KUS publishedByUser KPE11624 - DHARAMENDRAKUMAR D N bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Smt Shilpa G. JE splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9886634384 tenderSupplierList None
tenderSchedule	createdTs 1724063300057 version 4 createdDate None modifiedDate None tenderNumber DMA/2024-25/OW/WORK_INDENT27212 title P-3CONSTRUCTION OF SECRUITY CUM OFFICE ROOM CIVIL WORKS 5.0mx3.6m. 2CONSTRUCTION OF TOILET BLOCK 3.5mx3.5m. 3CONSTRUCTION OF SEPTIC TANK 2.5mx1.8mx2.45m. 4CONSTRUCTION OF SOAK PIT. 5 DRILLING OF BOREWELL IN KUSTAGI TMC SWM SITE. (ST Category) description P-3CONSTRUCTION OF SECRUITY CUM OFFICE ROOM CIVIL WORKS 5.0mx3.6m. 2CONSTRUCTION OF TOILET BLOCK 3.5mx3.5m. 3CONSTRUCTION OF SEPTIC TANK 2.5mx1.8mx2.45m. 4CONSTRUCTION OF SOAK PIT. 5 DRILLING OF BOREWELL IN KUSTAGI TMC SWM SITE. (ST Category) category WORKS categoryText Works ecv 1822544.03 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2352 locationName DMA Town Municipal Council Kushtagi provisionalAmount 2147000.0 groupOverheadTotal None fileNumber TMCK/SWM/DPR/2024-25/3
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724063300000 0 None None Other Works P-3CONSTRUCTION OF SECRUITY CUM OFFICE ROOM CIVIL WORKS 5.0mx3.6m. 2CONSTRUCTION OF TOILET BLOCK 3.5mx3.5m. 3CONSTRUCTION OF SEPTIC TANK 2.5mx1.8mx2.45m. 4CONSTRUCTION OF SOAK PIT. 5 DRILLING OF BOREWELL IN KUSTAGI TMC SWM SITE. (ST Category) (SECRUITY CUM OFFICE ROOM) 744526.51 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3810898 144687 None code01 Clearing and Grubbing Road Land : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. (CM SR 2023-24/Vol-3/P.No. 9/2.5 (ii)/A ) By Mechanical Means using Dozer, In area of light jungle Sqm 412.65 412.65 0.18 False None None False None False 74.277 0 3810899 144687 None code02 Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM of machineries etc., complete Ordinary/Hard Soil. In all kinds of soils Depth upto 3 m (CM SR 2023-24/Vol-1/P.No. 8/1.14.1 ) Cum 107.1 107.1 41.616 False None None False None False 4457.0736 0 3810900 144687 None code03 Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM of machineries etc., complete In ordinary/soft rock without blasting upto 1.5 m depth. In all kinds of soils Depth upto 3 m (CM SR 2023-24/Vol-1/P.No. 8/1.15.1 ) Cum 381.15 381.15 4.624 False None None False None False 1762.4376 0 3810901 144687 None code04 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/Vol-1/P.No.15/2.1.3) Cum 6288.45 6288.45 3.74 False None None False None False 23518.803 0 3810902 144687 None code05 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately))(CM SR 2023-24/Vol-1/P.No.74/2.4.2) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7170.28 7170.28 4.12 False None None False None False 29541.5536 0 3810903 144687 None code06 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (CM SR 2023-24/Vol-2/P.No.9/5.4) Cum 6708.45 6708.45 11.343 False None None False None False 76093.94835 0 3810904 144687 None code07 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (CM SR 2023-24/Vol-1/P.No.16/2.3.1) Cum 9958.73 9958.73 2.322 False None None False None False 23124.17106 0 3810905 144687 None code08 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.16/2.5.1) Cum 11138.4 11138.4 1.544 False None None False None False 17197.6896 0 3810906 144687 None code09 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.16/2.5.1) Cum 10442.25 10442.25 2.94 False None None False None False 30700.215 0 3810907 144687 None code10 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.16/2.5.1) Cum 10094.18 10094.18 0.24 False None None False None False 2422.6032 0 3810908 144687 None code11 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.16/2.5.1) Cum 11834.55 11834.55 1.36 False None None False None False 16094.988 0 3810909 144687 None code12 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification) (CM SR 2023-24/Vol-1/P.No.18/2.11(A)) Building t 93929.85 93929.85 1.01 False None None False None False 94869.1485 0 3810910 144687 None code13 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (CM SR 2023-24/Vol-1/P.No.7/1.9) Filling. Cum 279.3 279.3 20.496 False None None False None False 5724.5328 0 3810911 144687 None code14 Providing and constructing load bearing wall with Solid Concrete blocks of size 400 x 200 x 200 mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (CM SR 2023-24/Vol-2/P.No.17/6.32) Sqm 1375.5 1375.5 40.98 False None None False None False 56367.99 0 3810912 144687 None code15 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (CM SR 2023-24/Vol-2/P.No.17/6.33) Sqm 1292.55 1292.55 13.65 False None None False None False 17643.3075 0 3810913 144687 None code16 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2023-24/Vol-2/P.No.42/8.8) Sqm 389.55 389.55 43.56 False None None False None False 16968.798 0 3810914 144687 None code17 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/Vol-2/P.No.42/8.7) Sqm 384.3 384.3 74.53 False None None False None False 28641.879 0 3810915 144687 None code18 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/Vol-2/P.No.41/8.1.2) Sqm 253.05 253.05 14.72 False None None False None False 3724.896 0 3810916 144687 None code19 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).(CM SR 2023-24/Vol-2/P.No.62/9.21.2) Size of Tile 600x600 mm. Sqm 1299.9 1299.9 14.72 False None None False None False 19134.528 0 3810917 144687 None code20 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin- charge. (CM SR 2023-24/Vol-2/P.No.44/8.21) Sqm 27.3 27.3 14.72 False None None False None False 401.856 0 3810918 144687 None code21 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/Vol-2/P.No.46/8.31) Sqm 186.9 186.9 43.56 False None None False None False 8141.364 0 3810919 144687 None code22 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/Vol-2/P.No.46/8.33.1) Sqm 165.9 165.9 74.53 False None None False None False 12364.527 0 3810920 144687 None code23 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2023-24/Vol-2/P.No.48/8.40) Sqm 120.75 120.75 5.94 False None None False None False 717.255 0 3810921 144687 None code24 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (CM SR 2023-24/Vol-2/P.No.86/11.34A) Kgs 176.4 176.4 115.0 False None None False None False 20286.0 0 3810922 144687 None code25 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(CM SR 2023-24/Vol-2/P.No.100/12.13.1) Cum 103755.75 103755.75 0.14 False None None False None False 14525.805 0 3810923 144687 None code26 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) .(CM SR 2023-24/Vol-2/P.No.100/12.15) Sqm 7816.2 7816.2 2.1 False None None False None False 16414.02 0 3810924 144687 None code27 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.(CM SR 2023-24/Vol-2/P.No.105/12.57.4) -do- 35 mm thick both side Teak Sqm 4758.6 4758.6 3.15 False None None False None False 14989.59 0 3810925 144687 None code28 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (CM SR 2023-24/Vol-2/P.No.105/12.62) Nos 248.85 248.85 7.0 False None None False None False 1741.95 0 3810926 144687 None code29 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. (CM SR 2023-24/Vol-2/P.No.105/12.61) Nos 1039.5 1039.5 3.0 False None None False None False 3118.5 0 3810927 144687 None code30 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (CM SR 2023-24/Vol-2/P.No.105/12.63) Nos 136.5 136.5 7.0 False None None False None False 955.5 0 3810928 144687 None code31 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (CM SR 2023-24/Vol-2/P.No.105/12.58) Nos 126.0 126.0 3.0 False None None False None False 378.0 0 3810929 144687 None code32 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked black solid plastic seat and lid (CM SR 2023-24/Vol-2/P.No.131/14.2.2) Each 5076.75 5076.75 1.0 False None None False None False 5076.75 0 3810930 144687 None code33 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(CM SR 2023-24/Vol-2/P.No.132/14.7.2)White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap Each 2689.05 2689.05 1.0 False None None False None False 2689.05 0 3810931 144687 None code34 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(CM SR 2023-24/Vol-2/P.No.136/14.28.1.1) 32 mm dia Each 79.8 79.8 2.0 False None None False None False 159.6 0 3810932 144687 None code35 Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM of acquirements and testing complete as per specifications. - 110mm dia (NORTH ZONE PWD SR 2016-17/P.No 88/12.116.1) m 455.7 455.7 20.0 False None None False None False 9114.0 0 3810933 144687 None code36 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required, utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. (CM SR 2023-24/Vol-1/P.No. 44/1.17.1 ) All kinds of soils. Depth upto 1.50m Cum 275.1 275.1 22.95 False None None False None False 6313.545 0 3810934 144687 None code37 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc (CM SR 2023-24/Vol-1/P.No. 94/9.1.4) K010D HDPE Grade PE80-PN6.0,110mm dia m 492.45 492.45 30.0 False None None False None False 14773.5 0 3810935 144687 None code38 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge ofwork and latest amendments (CM SR 2023-24/Vol-1/P.No. 149/9.1.4) 0.50 HP/0.37kW - 5 STG(stage) Each 10678.5 10678.5 1.0 False None None False None False 10678.5 0 3810936 144687 None code39 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete as per the direction of engineer incharge of work.external work. - 32mm nominal dia pipes (CM SR 2023-24/Vol-2/P.No. 122/13.33.4 ) m 416.64 416.64 20.0 False None None False None False 8332.8 0 3810937 144687 None code40 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.0m spacing. this includes jointing of pipes and fittings with one step solvent cementand the cost of cutting chase and making good the same including testing of joints complete as per the direction of engineer incharge of work Conclead work, including cutting chase and making good the walls etc - 20mm nominal dia pipes (CM SR 2023-24/Vol-2/P.No. 122/13.32.2) m 397.95 397.95 20.0 False None None False None False 7959.0 0 3810938 144687 None code41 Cutting holes upto 30x30 cm in walls including making good the same : with common burnt clay F.P.S (non-modular) Bricks (CM SR 2023-24/Vol-2/P.No. 123/13.36) Each 339.15 339.15 10.0 False None None False None False 3391.5 0 3810939 144687 None code42 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore (CM SR 2023-24/Vol-1/P.No. 117/13.2.2) Each 320.25 320.25 5.0 False None None False None False 1601.25 0 3810940 144687 None code43 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore (CM SR 2023-24/Vol-1/P.No. 117/13.4.2) Each 627.9 627.9 1.0 False None None False None False 627.9 0 3810941 144687 None code44 Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). - 10cms x 7.5cms (NORTH ZONE PWD SR 2018-19/P.No 90/12.113.1) Each 262.5 262.5 3.0 False None None False None False 787.5 0 3810942 144687 None code45 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern (CM SR 2023-24/Vol-2/P.No. 131/14.4.1) Each 4676.7 4676.7 1.0 False None None False None False 4676.7 0 3810943 144687 None code46 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. (CM SR 2023-24/Vol-5/P.No. 191/16.9) Nos 5726.7 5726.7 1.0 False None None False None False 5726.7 0 3810944 144687 None code47 Providing and placing on terrace (at all floor levels) polyethylene water storage tanks, IS : 12701marked with cover and suitable locking arrangements, making necessary holes for inlet, outlet and over flow pipes but with out fittings and the base support for tank (CM SR 2023-24/Vol-2/P.No. 123/13.34) Ltr 9.45 9.45 1000.0 False None None False None False 9450.0 0 3810945 144687 None code48 Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220 240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W Each 690.0 690.0 2.0 False None None False None False 1380.0 0 3810946 144687 None code49 Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 5-6W Each 571.0 571.0 4.0 False None None False None False 2284.0 0 3810947 144687 None code50 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model Each 2984.0 2984.0 2.0 False None None False None False 5968.0 0 3810948 144687 None code51 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders Each 122.0 122.0 8.0 False None None False None False 976.0 0 3810949 144687 None code52 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 315.0 315.0 2.0 False None None False None False 630.0 0 3810950 144687 None code53 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20 mm dia 2 mm thick Mtr 66.0 66.0 75.0 False None None False None False 4950.0 0 3810951 144687 None code54 Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2 mm thick Mtr 69.0 69.0 50.0 False None None False None False 3450.0 0 3810952 144687 None code55 Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely. 20mm Mtr 19.0 19.0 20.0 False None None False None False 380.0 0 3810953 144687 None code56 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. Each 6867.0 6867.0 1.0 False None None False None False 6867.0 0 3810954 144687 None code57 Grounding of towers including cost of 40 mm dia 2.5 mm thick, class 'C' G.I. Pipe of 3 metres length as per specifications, with 50 X 6 mm GI Flats 3 metre long, salt charcoal, including excavation charges. Set 4950.0 4950.0 1.0 False None None False None False 4950.0 0 3810955 144687 None code58 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments. 1.5 mm2 Mtr 26.0 26.0 250.0 False None None False None False 6500.0 0 3810956 144687 None code59 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2 Mtr 42.0 42.0 250.0 False None None False None False 10500.0 0 3810957 144687 None code60 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4.0 mm2 Mtr 63.0 63.0 100.0 False None None False None False 6300.0 0 3810958 144687 None code61 Supplying and fixing PVC/metal conduit Deep junction box. 19/20mm deep junction box Each 49.0 49.0 12.0 False None None False None False 588.0 0 3810959 144687 None code62 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A Each 401.0 401.0 1.0 False None None False None False 401.0 0 3810960 144687 None code63 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG Sqm 0.5 0.5 5000.0 False None None False None False 2500.0 0 3810961 144687 None code64 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 6.4.5 3.5 core 25 sqmm Mtr 180.0 180.0 20.0 False None None False None False 3600.0 0 3810962 144687 None code65 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 16-25 A 2 pole Each 4277.0 4277.0 1.0 False None None False None False 4277.0 0 3810963 144687 None code66 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 100 A 25 kA Each 6086.0 6086.0 1.0 False None None False None False 6086.0 0 3810964 144687 None code67 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP Each 739.0 739.0 1.0 False None None False None False 739.0 0 3810965 144687 None code68 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN Each 1717.0 1717.0 1.0 False None None False None False 1717.0 0 3810966 144687 None code69 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP Each 415.0 415.0 1.0 False None None False None False 415.0 0 3810967 144687 None code70 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 1-3 way Each 103.0 103.0 2.0 False None None False None False 206.0 0 3810968 144687 None code71 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 way Each 137.0 137.0 2.0 False None None False None False 274.0 0 3810969 144687 None code72 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 6 way Each 173.0 173.0 2.0 False None None False None False 346.0 0 3810970 144687 None code73 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 way Each 219.0 219.0 2.0 False None None False None False 438.0 0 3810971 144687 None code74 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-3 way Each 138.0 138.0 2.0 False None None False None False 276.0 0 3810972 144687 None code75 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5 way Each 177.0 177.0 2.0 False None None False None False 354.0 0 3810973 144687 None code76 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6 way Each 220.0 220.0 2.0 False None None False None False 440.0 0 3810974 144687 None code77 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 way Each 261.0 261.0 2.0 False None None False None False 522.0 0 3810975 144687 None code78 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1-3 Module Each 137.0 137.0 2.0 False None None False None False 274.0 0 3810976 144687 None code79 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 175.0 175.0 2.0 False None None False None False 350.0 0 3810977 144687 None code80 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 234.0 234.0 2.0 False None None False None False 468.0 0 3810978 144687 None code81 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 284.0 284.0 2.0 False None None False None False 568.0 0 3810979 144687 None code82 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 357.0 357.0 2.0 False None None False None False 714.0 0 3810980 144687 None code83 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 236.0 236.0 40.0 False None None False None False 9440.0 0 3810981 144687 None code84 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket Each 156.0 156.0 1.0 False None None False None False 156.0 0 3810982 144687 None code85 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 Each 337.0 337.0 1.0 False None None False None False 337.0 0 3810983 144687 None code86 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable-1 pair m 15.0 15.0 30.0 False None None False None False 450.0 0 1724063300000 0 None None Other Works P-3CONSTRUCTION OF SECRUITY CUM OFFICE ROOM CIVIL WORKS 5.0mx3.6m. 2CONSTRUCTION OF TOILET BLOCK 3.5mx3.5m. 3CONSTRUCTION OF SEPTIC TANK 2.5mx1.8mx2.45m. 4CONSTRUCTION OF SOAK PIT. 5 DRILLING OF BOREWELL IN KUSTAGI TMC SWM SITE. (ST Category) (TOILET BLOCK) 615895.48 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3810984 144688 None code01 Clearing and Grubbing Road Land : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. (CM SR 2023-24/Vol-3/P.No. 9/2.5 (ii)/A ) By Mechanical Means using Dozer, In area of light jungle Sqm 412.65 412.65 0.1225 False None None False None False 50.549625 0 3810985 144688 None code02 Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM of machineries etc., complete Ordinary/Hard Soil. In all kinds of soils Depth upto 3 m ( CM SR 2023-24/Vol-1/P.No. 8/1.14.1 ) Cum 107.1 107.1 30.05 False None None False None False 3218.355 0 3810986 144688 None code03 Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM of machineries etc., complete In ordinary/soft rock without blasting upto 1.5 m depth. In all kinds of soils Depth upto 3 m (CM SR 2023-24/Vol-1/P.No. 8/1.15.1 ) Cum 381.15 381.15 3.34 False None None False None False 1273.041 0 3810987 144688 None code04 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ( CM SR 2023-24/Vol-1/P.No.15/2.1.3 ) Cum 6288.45 6288.45 2.73 False None None False None False 17167.4685 0 3810988 144688 None code05 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately))(CM SR 2023-24/Vol-1/P.No.74/2.4.2) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7218.89 7218.89 2.74 False None None False None False 19779.7586 0 3810989 144688 None code06 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (CM SR 2023-24/Vol-2/P.No.9/5.4) Cum 6708.45 6708.45 9.27 False None None False None False 62187.3315 0 3810990 144688 None code07 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (CM SR 2023-24/Vol-1/P.No.16/2.3.1) Cum 9958.73 9958.73 1.89 False None None False None False 18821.9997 0 3810991 144688 None code08 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.16/2.5.1) Cum 11138.4 11138.4 1.26 False None None False None False 14034.384 0 3810992 144688 None code09 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.16/2.5.1) Cum 11834.55 11834.55 1.36 False None None False None False 16094.988 0 3810993 144688 None code10 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.16/2.5.1) Cum 10442.25 10442.25 2.1 False None None False None False 21928.725 0 3810994 144688 None code11 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.16/2.5.1) Cum 10094.18 10094.18 0.16 False None None False None False 1615.0688 0 3810995 144688 None code12 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification) (CM SR 2023-24/Vol-1/P.No.18/2.11(A)) Building t 93929.85 93929.85 0.78 False None None False None False 73265.283 0 3810996 144688 None code13 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (CM SR 2023-24/Vol-1/P.No.34/1.9) Filling. Cum 279.3 279.3 14.34 False None None False None False 4005.162 0 3810997 144688 None code14 Providing and constructing load bearing wall with Solid Concrete blocks of size 400 x 200 x 200 mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (CM SR 2023-24/Vol-2/P.No.17/6.32) Sqm 1375.5 1375.5 37.08 False None None False None False 51003.54 0 3810998 144688 None code15 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (CM SR 2023-24/Vol-2/P.No.17/6.33) Sqm 1292.55 1292.55 10.35 False None None False None False 13377.8925 0 3810999 144688 None code16 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2023-24/Vol-2/P.No.42/8.8) Sqm 389.55 389.55 39.18 False None None False None False 15262.569 0 3811000 144688 None code17 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/Vol-2/P.No.42/8.7) Sqm 384.3 384.3 63.56 False None None False None False 24426.108 0 3811001 144688 None code18 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/Vol-2/P.No.41/8.1.2) Sqm 253.05 253.05 9.61 False None None False None False 2431.8105 0 3811002 144688 None code19 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).(CM SR 2023-24/Vol-2/P.No.62/9.21.2) Size of Tile 600x600 mm. Sqm 1299.9 1299.9 9.61 False None None False None False 12492.039 0 3811003 144688 None code20 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin- charge. (CM SR 2023-24/Vol-2/P.No.44/8.21) Sqm 27.3 27.3 9.61 False None None False None False 262.353 0 3811004 144688 None code21 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/Vol-2/P.No.46/8.31) Sqm 186.9 186.9 39.18 False None None False None False 7322.742 0 3811005 144688 None code22 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(CM SR 2023-24/Vol-2/P.No.46/8.33) Sqm 165.9 165.9 63.56 False None None False None False 10544.604 0 3811006 144688 None code23 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2023-24/Vol-2/P.No.48/8.40) Sqm 120.75 120.75 0.72 False None None False None False 86.94 0 3811007 144688 None code24 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (CM SR 2023-24/Vol-2/P.No.86/11.34A) Kg 176.4 176.4 60.0 False None None False None False 10584.0 0 3811008 144688 None code25 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(CM SR 2023-24/Vol-2/P.No.100/12.3.1) Cum 103755.75 103755.75 0.13 False None None False None False 13488.2475 0 3811009 144688 None code26 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) .(CM SR 2023-24/Vol-2/P.No.100/12.15) Sqm 7816.2 7816.2 1.58 False None None False None False 12349.596 0 3811010 144688 None code27 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.(CM SR 2023-24/Vol-2/P.No.105/12.57.4) -do- 35 mm thick both side Teak Sqm 4758.6 4758.6 3.15 False None None False None False 14989.59 0 3811011 144688 None code28 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (CM SR 2023-24/Vol-2/P.No.105/12.62) Nos 248.85 248.85 3.0 False None None False None False 746.55 0 3811012 144688 None code29 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. (CM SR 2023-24/Vol-2/P.No.105/12.61) Nos 1039.5 1039.5 3.0 False None None False None False 3118.5 0 3811013 144688 None code30 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (CM SR 2023-24/Vol-2/P.No.105/12.63) Nos 136.5 136.5 3.0 False None None False None False 409.5 0 3811014 144688 None code31 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (CM SR 2023-24/Vol-2/P.No.105/12.58) Nos 126.0 126.0 3.0 False None None False None False 378.0 0 3811015 144688 None code32 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked black solid plastic seat and lid(CM SR 2023-24/Vol-2/P.No.131/14.2.2) Each 5076.75 5076.75 1.0 False None None False None False 5076.75 0 3811016 144688 None code33 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (CM SR 2023-24/Vol-2/P.No.132/14.7.2) Each 2689.05 2689.05 1.0 False None None False None False 2689.05 0 3811017 144688 None code34 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia(CM SR 2023-24/Vol-2/P.No.136/14.28.1.1) Each 79.8 79.8 2.0 False None None False None False 159.6 0 3811018 144688 None code35 Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM of acquirements and testing complete as per specifications. - 110mm dia (NORTH ZONE PWD SR 2016-17/P.No 88/12.116.1) m 455.7 455.7 20.0 False None None False None False 9114.0 0 3811019 144688 None code36 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. ( CM SR 2023-24/Vol-1/P.No. 10/1.17.1 ) All kinds of soils. Depth upto 1.50 m Cum 275.1 275.1 22.95 False None None False None False 6313.545 0 3811020 144688 None code37 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc (CM SR 2023-24/P.No.94/SI.No.9.1.4) K010D HDPE Grade PE80-PN6.0,110mm dia m 492.45 492.45 30.0 False None None False None False 14773.5 0 3811021 144688 None code38 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete. (CM SR 2023-24/P.No.149/SI.No.13.4) 0.50 HP/0.37kW - 5 STG(stage) Each 10678.5 10678.5 1.0 False None None False None False 10678.5 0 3811022 144688 None code39 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete as per the direction of engineer incharge of work.external work. - 32mm nominal dia pipes (CM SR 2023-24/Vol-2/P.No. 122/13.33.4 ) m 390.6 390.6 20.0 False None None False None False 7812.0 0 3811023 144688 None code40 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.0m spacing. this includes jointing of pipes and fittings with one step solvent cementand the cost of cutting chase and making good the same including testing of joints complete as per the direction of engineer incharge of work Conclead work, including cutting chase and making good the walls etc - 20mm nominal dia pipes (CM SR 2023-24/Vol-2/P.No.122/13.32.2 ) m 397.95 397.95 20.0 False None None False None False 7959.0 0 3811024 144688 None code41 Cutting holes upto 30x30 cm in walls including making good the same : with common burnt clay F.P.S (non-modular) Bricks (CM SR 2023-24/Vol-2/P.No. 123/13.36) Each 339.15 339.15 10.0 False None None False None False 3391.5 0 3811025 144688 None code42 Providing and fixing brass bib cock of approved quality. 20 mm nominal bore (CM SR 2023-24/Vol-1/P.No.117/13.2.2) Each 320.25 320.25 5.0 False None None False None False 1601.25 0 3811026 144688 None code43 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore (CM SR 2023-24/Vol-1/P.No.117/13.4.2) Each 627.9 627.9 2.0 False None None False None False 1255.8 0 3811027 144688 None code44 Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). - 10cms x 7.5cms (NORTH ZONE PWD SR 2018-19/P.No 90/12.113.1) Each 262.5 262.5 5.0 False None None False None False 1312.5 0 3811028 144688 None code45 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern ( CM SR 2023-24/Vol-2/P.No. 131/14.4.1) Each 4676.7 4676.7 2.0 False None None False None False 9353.4 0 3811029 144688 None code46 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. (CM SR 2023-24/Vol-5/P.No. 191/16.9) Each 5726.7 5726.7 2.0 False None None False None False 11453.4 0 3811030 144688 None code47 Providing and placing on terrace (at all floor levels) polyethylene water storage tanks, IS : 12701marked with cover and suitable locking arrangements, making necessary holes for inlet, outlet and over flow pipes but with out fittings and the base support for tank (CM SR 2023-24/Vol-2/P.No. 123/13.34) Ltr 9.45 9.45 1000.0 False None None False None False 9450.0 0 3811031 144688 None code48 Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 5-6W Each 571.0 571.0 3.0 False None None False None False 1713.0 0 3811032 144688 None code49 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders Each 122.0 122.0 3.0 False None None False None False 366.0 0 3811033 144688 None code50 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20 mm dia 2 mm thick Mtr 66.0 66.0 50.0 False None None False None False 3300.0 0 3811034 144688 None code51 Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2 mm thick Mtr 69.0 69.0 50.0 False None None False None False 3450.0 0 3811035 144688 None code52 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. Each 6867.0 6867.0 1.0 False None None False None False 6867.0 0 3811036 144688 None code53 Grounding of towers including cost of 40 mm dia 2.5 mm thick, class 'C' G.I. Pipe of 3 metres length as per specifications, with 50 X 6 mm GI Flats 3 metre long, salt charcoal, including excavation charges. Set 7335.0 7335.0 1.0 False None None False None False 7335.0 0 3811037 144688 None code54 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments. 1.5 mm2 Mtr 26.0 26.0 150.0 False None None False None False 3900.0 0 3811038 144688 None code55 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2 Mtr 42.0 42.0 100.0 False None None False None False 4200.0 0 3811039 144688 None code56 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4.0 mm2 Mtr 63.0 63.0 50.0 False None None False None False 3150.0 0 3811040 144688 None code57 Supplying and fixing PVC/metal conduit Deep junction box. 19/20mm deep junction box Each 49.0 49.0 4.0 False None None False None False 196.0 0 3811041 144688 None code58 Fabricating supplying and mounting MS box made out. SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG Sqm 0.5 0.5 5000.0 False None None False None False 2500.0 0 3811042 144688 None code59 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 6.4.5 3.5 core 25 sqmm Mtr 180.0 180.0 20.0 False None None False None False 3600.0 0 3811043 144688 None code60 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 16-25 A 2 pole Each 4277.0 4277.0 2.0 False None None False None False 8554.0 0 3811044 144688 None code61 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 100 A 25 kA Each 6086.0 6086.0 1.0 False None None False None False 6086.0 0 3811045 144688 None code62 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP Each 738.0 738.0 2.0 False None None False None False 1476.0 0 3811046 144688 None code63 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN Each 1717.0 1717.0 1.0 False None None False None False 1717.0 0 3811047 144688 None code64 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP Each 415.0 415.0 1.0 False None None False None False 415.0 0 3811048 144688 None code65 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 way Each 137.0 137.0 2.0 False None None False None False 274.0 0 3811049 144688 None code66 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 6 way Each 173.0 173.0 2.0 False None None False None False 346.0 0 3811050 144688 None code67 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5 way Each 177.0 177.0 2.0 False None None False None False 354.0 0 3811051 144688 None code68 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6 way Each 212.0 212.0 2.0 False None None False None False 424.0 0 3811052 144688 None code69 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 161.0 161.0 2.0 False None None False None False 322.0 0 3811053 144688 None code70 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 175.0 175.0 2.0 False None None False None False 350.0 0 3811054 144688 None code71 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 234.0 234.0 5.0 False None None False None False 1170.0 0 3811055 144688 None code72 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 236.0 236.0 20.0 False None None False None False 4720.0 0 1724063300000 0 None None Other Works P-3CONSTRUCTION OF SECRUITY CUM OFFICE ROOM CIVIL WORKS 5.0mx3.6m. 2CONSTRUCTION OF TOILET BLOCK 3.5mx3.5m. 3CONSTRUCTION OF SEPTIC TANK 2.5mx1.8mx2.45m. 4CONSTRUCTION OF SOAK PIT. 5 DRILLING OF BOREWELL IN KUSTAGI TMC SWM SITE. (ST Category) (SEPTIC TANK) 92029.77 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3811056 144689 None code01 Clearing and Grubbing Road Land : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. (CM SR 2023-24/Vol-3/P.No. 9/2.5 (ii)/A ) By Mechanical Means using Dozer, In area of light jungle Sqm 412.65 412.65 0.0638 False None None False None False 26.32707 0 3811057 144689 None code02 Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM of machineries etc., complete Ordinary/Hard Soil. In all kinds of soils Depth upto 3 m (CM SR 2023-24/Vol-1/P.No. 8/1.14.1 ) Cum 107.1 107.1 14.07 False None None False None False 1506.897 0 3811058 144689 None code03 Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM of machineries etc., complete In ordinary/soft rock without blasting upto 1.5 m depth. In all kinds of soils Depth upto 3 m (CM SR 2023-24/Vol-1/P.No. 8/1.15.1 ) Cum 381.15 381.15 1.56 False None None False None False 594.594 0 3811059 144689 None code04 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/Vol-1/P.No.15/2.1.3 ) Cum 6288.45 6288.45 0.638 False None None False None False 4012.0311 0 3811060 144689 None code05 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)). M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (CM SR 2023-24/Vol-1/P.No.16/2.4.4) Cum 7787.01 7787.01 4.54 False None None False None False 35353.0254 0 3811061 144689 None code06 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.17/2.5.1) Cum 10442.25 10442.25 0.825 False None None False None False 8614.85625 0 3811062 144689 None code07 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification) (CM SR 2023-24/Vol-1/P.No.18/2.11(A)) Building t 93929.85 93929.85 0.4292 False None None False None False 40314.69162 0 3811063 144689 None code08 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (CM SR 2023-24/Vol-2/P.No.45/8.28) Sqm 93.45 93.45 17.2 False None None False None False 1607.34 0 1724063300000 0 None None Other Works P-3CONSTRUCTION OF SECRUITY CUM OFFICE ROOM CIVIL WORKS 5.0mx3.6m. 2CONSTRUCTION OF TOILET BLOCK 3.5mx3.5m. 3CONSTRUCTION OF SEPTIC TANK 2.5mx1.8mx2.45m. 4CONSTRUCTION OF SOAK PIT. 5 DRILLING OF BOREWELL IN KUSTAGI TMC SWM SITE. (ST Category) (SOAK PIT) 128179.32 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3811064 144690 None code01 Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM of machineries etc., complete Ordinary/Hard Soil. In all kinds of soils Depth upto 3 m (CM SR 2023-24/Vol-1/P.No. 8/1.14.1 ) Cum 107.1 107.1 20.06 False None None False None False 2148.426 0 3811065 144690 None code02 Earth work excavation for foundation of structure upto 3 mtrs. By mechanicle means as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth upto 1.00km lead. including cost of labour, materials and HOM of machineries etc., complete In ordinary/soft rock without blasting upto 1.5 m depth. In all kinds of soils Depth upto 3 m (CM SR 2023-24/Vol-1/P.No. 8/1.15.1 ) Cum 381.15 381.15 2.23 False None None False None False 849.9645 0 3811066 144690 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (CM SR 2023-24/Vol-1/P.No.15/2.1.3 ) Cum 6288.45 6288.45 0.37 False None None False None False 2326.7265 0 3811067 144690 None code04 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour,scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(CM SR 2023-24/Vol-2/P.No.13/6.4 ) Cum 9094.05 9094.05 11.01 False None None False None False 100125.4905 0 3811068 144690 None code05 Providing and laying 40mm size graded coarse aggregates /pebble stones for side as per drawing, specifications with all leads and lifts complete etc.,as directed by the Engineer.The rate includes cost of material, transportion, laying and compacting with all labour etc., (For drainage layers) (CM SR 2023-24/Vol-1/P.No.A-38/Sl.No.7) Cum 1190.0 1190.0 2.24 False None None False None False 2665.6 0 3811069 144690 None code06 Providing and laying 100mm size graded coarse aggregates /pebble stones (For filter bed)as per drawing, specifications with all leads and lifts complete etc.,as directed by the Engineer.The rate includes cost of material, transportion, laying and compacting with all labour etc., (For drainage layers) :( CM SR 2023-24/Vol-1/P.No.A-38/Sl.No.9) Cum 1143.0 1143.0 1.81 False None None False None False 2068.83 0 3811070 144690 None code07 Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete.. (CM SR 2023-24/Vol-1/P.No.7/1.11) Filling. Cum 2177.0 2177.0 2.78 False None None False None False 6052.06 0 3811071 144690 None code08 Providing and laying 40mm size graded coarse aggregates /pebble stones (For filter bed)as per drawing, specifications with all leads and lifts complete etc.,as directed by the Engineer.The rate includes cost of material, transportion, laying and compacting with all labour etc., (For drainage layers) :(CM SR 2023-24/Vol-1/P.No.A-38/Sl.No 7) Cum 1190.0 1190.0 0.75 False None None False None False 892.5 0 3811072 144690 None code09 Providing and laying 25mm size graded coarse aggregates /pebble stones (For filter bed)as per drawing, specifications with all leads and lifts complete etc.,as directed by the Engineer.The rate includes cost of material, transportion, laying and compacting with all labour etc., (For drainage layers) :(CM SR 2023-24/Vol-1/P.No.A-38/Sl.No 5) Cum 1333.0 1333.0 0.75 False None None False None False 999.75 0 3811073 144690 None code10 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications (CM SR 2023-24/Vol-1/P.No.16/2.5.1) Cum 10442.25 10442.25 0.52 False None None False None False 5429.97 0 3811074 144690 None code11 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 75mm dia., 6 kg/sqcm & class 3 (CM SR 2023-24Vol-5/P.No.113/10.1.5) m 231.0 231.0 20.0 False None None False None False 4620.0 0 1724063300000 0 None None Other Works P-3CONSTRUCTION OF SECRUITY CUM OFFICE ROOM CIVIL WORKS 5.0mx3.6m. 2CONSTRUCTION OF TOILET BLOCK 3.5mx3.5m. 3CONSTRUCTION OF SEPTIC TANK 2.5mx1.8mx2.45m. 4CONSTRUCTION OF SOAK PIT. 5 DRILLING OF BOREWELL IN KUSTAGI TMC SWM SITE. (ST Category) (BOREWELL) 241912.95 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3811075 144691 None code01 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing groundwater in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test.(CM SR 2023-24/Vol-5/P.No. 140/12.4) Each 5552.4 5552.4 1.0 False None None False None False 5552.4 0 3811076 144691 None code02 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) (CM SR 2023-24/Vol-5/P.No. 139/12.1) a) Upto 50m m 388.5 388.5 50.0 False None None False None False 19425.0 0 3811077 144691 None code03 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) (CM SR 2023-24/Vol-5/P.No. 139/12.1) b) Above 50m upto 100m m 487.2 487.2 50.0 False None None False None False 24360.0 0 3811078 144691 None code04 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete) (CM SR 2023-24/Vol-5/P.No. 139/12.1) c) Above 100m upto 150m m 517.65 517.65 20.0 False None None False None False 10353.0 0 3811079 144691 None code05 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge (CM SR 2023-24/Vol-5/P.No. 143/12.34) Nos 172.2 172.2 1.0 False None None False None False 172.2 0 3811080 144691 None code06 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments (CM SR 2023-24/Vol-5/P.No. 143/12.33 ) Each 157.5 157.5 3.0 False None None False None False 472.5 0 3811081 144691 None code07 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. (CM SR 2023-24/Vol-5/P.No. 143/12.32 ) Nos 2029.65 2029.65 50.0 False None None False None False 101482.5 0 3811082 144691 None code08 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5 m2 (CM SR 2023-24/Vol-5/P.No. 154/13.22.2) m 89.25 89.25 300.0 False None None False None False 26775.0 0 3811083 144691 None code09 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP - 120 LPM @ 55 m = 9 STG Outlet Dia - 2.00" (CM SR 2023-24/Vol-5/P.No. 151/13.11.4) Each 27958.35 27958.35 1.0 False None None False None False 27958.35 0 3811084 144691 None code10 Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm (CM SR 2023-24/Vol-5/P.No. 154/13.24.1 ) Each 1312.5 1312.5 1.0 False None None False None False 1312.5 0 3811085 144691 None code11 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm (CM SR 2023-24/Vol-5/P.No. 154/13.25.1) Each 1312.5 1312.5 1.0 False None None False None False 1312.5 0 3811086 144691 None code12 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter. Upto 6 HP pumps, 3 to 6 HP pumps (CM SR 2023-24/Vol-5/P.No. 155/13.23.2) Each 10027.5 10027.5 1.0 False None None False None False 10027.5 0 3811087 144691 None code13 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (CM SR 2023-24/Vol-5/P.No. 156/13.32) Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3811088 144691 None code14 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc, complete as per specification, with testing of as per instructions of engineer incharge of work. (CM SR 2023-24/Vol-5/P.No. 156/13.33) Job 1417.5 1417.5 1.0 False None None False None False 1417.5 0 3811089 144691 None code15 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN (CM SR 2023-24/Vol-6/PWD Ele SR/P.No. 17/5.18.7) Nos 1777.0 1777.0 1.0 False None None False None False 1777.0 0 3811090 144691 None code16 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (CM SR 2023-24/Vol-6/PWD Ele SR/P.No. 5/2.2.1) m 269.0 269.0 10.0 False None None False None False 2690.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724063302000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1724063302000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724063302000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1724063302000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724063302000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1724063311000 0 None None ELIGIBILITY The GST of 18% shall be added separately to the estimate as per Govt Order No. PWD 51 RDF 2019, Bengaluru Dated : 18-03-2022. None 1724063317000 0 None None ELIGIBILITY All Terms and Conditions as per bid documents None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None b. Satisfactorily completed as prime contractor, at least one similar nature of work Any Original Construction Works to an extent 25% cost of the work (value not less than Rs 4.56 Lakhs) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None PWD Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None a. achieved in at least two financial years an average annual financial turnover of Rs. 18.23L not less than the estimated cost under this contract with valid UDIN No Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None 3.2 Liquid assets and /or availability of credit facilities of no less than Rs 6.44L. rupees Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc usually 30% of the amount of contract Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None ST CATOGERY CAST CERTIFICATE MANDATORY Others ST CATOGERY CAST CERTIFICATE MANDATORY createdTs version createdDate modifiedDate documentName None None None None Others -- ST CATOGERY CAST CERTIFICATE MANDATORY None None None None Principal place of business Others Principal place of business createdTs version createdDate modifiedDate documentName None None None None Others -- Principal place of business None None None None List of Existing commitments & ongoing works Others List of Existing commitments & ongoing works createdTs version createdDate modifiedDate documentName None None None None Others -- List of Existing commitments & ongoing works None None None None GST & PAN CARD Others GST & PAN CARD createdTs version createdDate modifiedDate documentName None None None None GST Registration
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid PWD Registration Certificate True Technical Bid b Satisfactorily completed as prime contractor, at least one similar nature of work Any Original Construction Works to an extent 25percent cost of the work value not less than Rs 4.56 Lakhs True Technical Bid ST CATOGERY CAST CERTIFICATE MANDATORY True Technical Bid Principal place of business True Technical Bid List of Existing commitments & ongoing works True Technical Bid GST & PAN CARD True Technical Bid 3.2Liquid assets and /or availability of credit facilities of no less than Rs 6.44L. rupees Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc usually 30percent of the amount of contract True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Other Works Koppala Kushtagi None None SECRUITY CUM OFFICE ROOM None None None None None None Other Works Koppala Kushtagi None None TOILET BLOCK None None None None None None Other Works Koppala Kushtagi None None SEPTIC TANK None None None None None None Other Works Koppala Kushtagi None None SOAK PIT None None None None None None Other Works Koppala Kushtagi None None BOREWELL None None None None None None
tenderAddress	None
tenderRecallDTO	None