createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1723776191242 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 48685.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 02-09-2024 16:00:00 tenderQueryClose 02-09-2024 11:00:00 technicalBidOpen None publishedDate 17-08-2024 18:33:32 publishedByPost TMC_CO_MDB publishedByUser KPE12367 - INDU M bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson JE MDB splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 8310712915 tenderSupplierList None
tenderSchedule	createdTs 1723776191287 version 4 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT26511 title Cost for Primary Shed for 1000sqft Additional work for Construction of Dry waste collection centre Moodubidri description Additional work for Construction of Dry waste collection centre Moodubidire category WORKS categoryText Works ecv 1636942.89 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2362 locationName DMA Town Municipal Council Moodbidri provisionalAmount 1947000.0 groupOverheadTotal None fileNumber MDB/24-25/MRF/DWCC/01
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1723776191000 0 None None Buildings Cost for Primary Shed for 1000sqft Additional work for Construction of Dry waste collection centre Moodubidri 1636942.89 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3783555 142947 None code01 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 484.96 484.96 70.7 False None None False None False 34286.672 0 3783556 142947 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth Cum 406.56 406.56 80.25 False None None False None False 32626.44 0 3783557 142947 None code03 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth Excavation for soak pit from 1.5m to 3.0 m Cum 476.0 476.0 5.55 False None None False None False 2641.8 0 3783558 142947 None code04 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. Cum 3003.84 3003.84 13.5 False None None False None False 40551.84 0 3783559 142947 None code05 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates Cum 5978.56 5978.56 2.8 False None None False None False 16739.968 0 3783560 142947 None code06 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7257.6 7257.6 12.15 False None None False None False 88179.84 0 3783561 142947 None code07 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7041.44 7041.44 39.5 False None None False None False 278136.88 0 3783562 142947 None code08 Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) including for OHT & reservoier, cost of materials, labour, HOM of machinery complete as per specifications. TMT bars Fe 550 Kg 88.49 88.49 4068.7012 False None None False None False 360039.369188 0 3783563 142947 None code09 Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works For PCC ( 5% on finished rate of concrete per cum) Sqm 5978.56 5978.56 0.139 False None None False None False 831.01984 0 3783564 142947 None code10 Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works Flooring Concrete ( 5 % on finished rate of concrete per cum) Sqm 7041.44 7041.44 1.975 False None None False None False 13906.844 0 3783565 142947 None code11 Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works For Base Slab ( 5% on finished rate of concrete per cum) Sqm 7257.6 7257.6 0.1037 False None None False None False 752.61312 0 3783566 142947 None code12 Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works For RCC Wall ( 10% on finished rate of concrete per cum) Sqm 7257.6 7257.6 0.6931 False None None False None False 5030.24256 0 3783567 142947 None code13 Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works For Top Slab ( 50% on finished rate of concrete per cum) Sqm 7257.6 7257.6 1.04 False None None False None False 7547.904 0 3783568 142947 None code14 Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works RCC Beam( 50 % of finished rate of concrete per cum) upto Plinth Sqm 7257.6 7257.6 0.2892 False None None False None False 2098.89792 0 3783569 142947 None code15 Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works RCC Beam( 60 % of finished rate of concrete per cum) above plinth Sqm 7257.6 7257.6 0.2809 False None None False None False 2038.65984 0 3783570 142947 None code16 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7155.68 7155.68 5.45 False None None False None False 38998.456 0 3783571 142947 None code17 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1467.2 1467.2 106.2 False None None False None False 155816.64 0 3783572 142947 None code18 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 396.48 396.48 302.25 False None None False None False 119836.08 0 3783573 142947 None code19 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 236.32 236.32 4.9 False None None False None False 1157.968 0 3783574 142947 None code20 Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Sqm 632.8 632.8 7.0 False None None False None False 4429.6 0 3783575 142947 None code21 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. Sqm 505.12 505.12 5.0 False None None False None False 2525.6 0 3783576 142947 None code22 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge Sqm 5015.36 5015.36 2.0 False None None False None False 10030.72 0 3783577 142947 None code23 Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Kg 204.96 204.96 63.0 False None None False None False 12912.48 0 3783578 142947 None code24 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4866.4 4866.4 4.5 False None None False None False 21898.8 0 3783579 142947 None code25 Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). - 12.5cms x 7.5cms Each 52.64 52.64 3.0 False None None False None False 157.92 0 3783580 142947 None code26 Providing and fixing in position brass bib cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Each 341.6 341.6 6.0 False None None False None False 2049.6 0 3783581 142947 None code27 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (Internal work). - 20mm nominal OD pipes m 271.04 271.04 25.0 False None None False None False 6776.0 0 3783582 142947 None code28 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (Internal work). - 50mm nominal OD pipes m 874.72 874.72 15.0 False None None False None False 13120.8 0 3783583 142947 None code29 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. l 10.08 10.08 1000.0 False None None False None False 10080.0 0 3783584 142947 None code30 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 460.32 460.32 40.0 False None None False None False 18412.8 0 3783585 142947 None code31 110 mm dia PVC Tee Each 281.12 281.12 17.0 False None None False None False 4779.04 0 3783586 142947 None code32 110mm dia PVC Elbow Each 338.24 338.24 4.0 False None None False None False 1352.96 0 3783587 142947 None code33 Providing and laying of Cinder of 120mm-150mm size free from debris and dust, includes procuring,transporation and laying into the anaerobic filter as per instruction of Engineer-in-charge Cum 1007.95 1007.95 2.0 False None None False None False 2015.9 0 3783588 142947 None code34 Supplying/Casting and fixing Precast Reinforced Cement Concrete perforated slabs (2" dia hole) of following thickness in RCC 1:2:4, using following HBGS jelly including cost of reinforcement steel in position, cost of moulding charges, casting of slab, fi Maintenance covers 600 mm x 600 mm x 50 mm for Settler, ABR & AF Each 319.45 319.45 4.0 False None None False None False 1277.8 0 3783589 142947 None code35 Supplying/Casting and fixing Precast Reinforced Cement Concrete perforated slabs (2" dia hole) of following thickness in RCC 1:2:4, using following HBGS jelly including cost of reinforcement steel in position, cost of moulding charges, casting of slab, fi Perforated slabs 950mm X 950mm X 75mm Each 1201.29 1201.29 2.0 False None None False None False 2402.58 0 3783590 142947 None code36 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 187.04 187.04 29.2 False None None False None False 5461.568 0 3783591 142947 None code37 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) Sqm 176.96 176.96 200.0 False None None False None False 35392.0 0 3783592 142947 None code38 Supplying & errection of RCC rings for well steining of 0.3 Mtr Depth using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted including centering, formwork and plastering for both faces with C.M 1:3 proportion as per design using 6.50mm M.S. coil at the rate of 10 Kgs/ring including cost of steel and fabrication, bailing out of water, errection etc., complete. For 1.50m dia (clear) rings of steining thickness 0.075mm upto 18 M depth Each 1880.81 1880.81 8.0 False None None False None False 15046.48 0 3783593 142947 None code39 Supplying/Casting and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly including cost of reinforcement steel in position, cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. Each 3795.39 3795.39 1.0 False None None False None False 3795.39 0 3783594 142947 None code40 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Sqm 896.0 896.0 231.55 False None None False None False 207468.8 0 3783595 142947 None code41 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 40 mm dia 2.5 mm thick m 164.64 164.64 20.0 False None None False None False 3292.8 0 3783596 142947 None code42 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.16 sqmm m 356.16 356.16 20.0 False None None False None False 7123.2 0 3783597 142947 None code43 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 2 4 way Each 11568.48 11568.48 3.0 False None None False None False 34705.44 0 3783598 142947 None code44 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Each 273.28 273.28 3.0 False None None False None False 819.84 0 3783599 142947 None code45 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. Each 464.8 464.8 3.0 False None None False None False 1394.4 0 3783600 142947 None code46 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/ casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A Short point upto 3Mtr from tapping point to out let via switch Point 301.28 301.28 5.0 False None None False None False 1506.4 0 3783601 142947 None code47 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP A.2.5 sqmm m 47.04 47.04 25.0 False None None False None False 1176.0 0 3783602 142947 None code48 Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input 220-240V 50/60Hz Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED light fitting 1 2 910 W Each 617.12 617.12 7.0 False None None False None False 4319.84 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1723776193000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1723776193000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1723776193000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1723776193000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1723776193000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1723776193000 0 None None ELIGIBILITY Department Registration Details None 1723776193000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1723776193000 0 None None ELIGIBILITY List of existing commitments and ongoing work None 1723776193000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1723776193000 0 None None ELIGIBILITY Banker Details None 1723796646000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1723796660000 0 None None ELIGIBILITY All terms & conditions apply as per the tender document KW-1 None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText To qualify for award of this contract, each tenderer should have in his name a valid EPF and ESI registration document and same shall be uploaded with copy of latest 3 months challan receipt of EPF and ESI contribution True Technical Bid Valid PWD Registration Certificate True Technical Bid Annual Turnover Certificate Annual Turnover Certificate To qualify for award of this contract, each tenderer in its name should have in the last five years I.e.2019-20-2023-24 True Technical Bid achieved in at least two financial years an average annual financial turnover usually not less than the estimated cost under this contract for works costing upto 100 lakhs Rs.19,47,421Lakhs True Technical Bid Work done certificate Satisfactory completed, as prime contractor, at least one similar work to an extent of 50 percentage of the cost of the work value not less than 9,73,710 Lakhs True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None