| 3799733 | 144121 | None | PWD SR 2023-24 Vol-1 Item No:1.4.1 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.n all kinds of soils Depth upto 1.5 m (PWD SR 2023-24 Vol-1 Item No:1.4.1 ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | CUBIC METER | 254.1 | 254.1 | 11.67 | False | None | None | False | None | False | 2965.347 | 0 |
| 3799734 | 144121 | None | V-1 2.1.3 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol-1 Item No:2.1.3) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 6288.45 | 6288.45 | 8.02 | False | None | None | False | None | False | 50433.369 | 0 |
| 3799735 | 144121 | None | PWD SR 2023-24 Vol-2 Item No:5.4) | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR 2023-24 Vol-2 Item No:5.4) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 6708.45 | 6708.45 | 2.59 | False | None | None | False | None | False | 17374.8855 | 0 |
| 3799736 | 144121 | None | PWD SR 2023-24 Vol-1 Item No:2.5.1 | COLUMNS: Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 11834.55 | 11834.55 | 1.09 | False | None | None | False | None | False | 12899.6595 | 0 |
| 3799737 | 144121 | None | PWD SR 2023-24 Vol-1 Item No:2.5.1 | Lintel Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol-1 Item No:2.5.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 11138.4 | 11138.4 | 2.21 | False | None | None | False | None | False | 24615.864 | 0 |
| 3799738 | 144121 | None | PWD SR 2023-24 Vol-1 Item No:2.5.1 | Roof Beam: Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol-1 Item No:2.5.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 11138.4 | 11138.4 | 3.48 | False | None | None | False | None | False | 38761.632 | 0 |
| 3799739 | 144121 | None | PWD SR 2023-24 Vol-1 Item No:2.5.1) | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol-1 Item No:2.5.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 10442.25 | 10442.25 | 1.46 | False | None | None | False | None | False | 15245.685 | 0 |
| 3799740 | 144121 | None | PWD SR 2023-24 Vol-1 Item No:2.5.1 | Slab: Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol-1 Item No:2.5.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 10442.25 | 10442.25 | 11.47 | False | None | None | False | None | False | 119772.6075 | 0 |
| 3799741 | 144121 | None | PWD SR 2023-24 Vol-1 Item No:2.5.1) | Chejja and Racks: Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol-1 Item No:2.5.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 10094.18 | 10094.18 | 0.86 | False | None | None | False | None | False | 8680.9948 | 0 |
| 3799742 | 144121 | None | PWD SR 2023-24 Vol-1 Item No:2.11 a) | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings (PWD SR 2023-24 Vol-1 Item No:2.11 a) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | t | 93929.85 | 93929.85 | 2.297 | False | None | None | False | None | False | 215756.86545 | 0 |
| 3799743 | 144121 | None | PWD SR 2023-24 Vol-2 Item No:6.8 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD SR 2023-24 Vol-2 Item No:6.8) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 8367.45 | 8367.45 | 20.24 | False | None | None | False | None | False | 169357.188 | 0 |
| 3799744 | 144121 | None | PWD CSR-2023-24 I.No.274 Volume 2 page no A-20) | Door Lock (PWD CSR-2023-24 I.No.274 Volume 2 page no A-20) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 365.4 | 365.4 | 1.0 | False | None | None | False | None | False | 365.4 | 0 |
| 3799745 | 144121 | None | Vol-2 Page No:75 Item No:11.5.2) | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Vol-2 Page No:75 Item No:11.5.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 3621.45 | 3621.45 | 8.19 | False | None | None | False | None | False | 29659.6755 | 0 |
| 3799746 | 144121 | None | Vol-2 Page No:47Item No:8.33.3) | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Vol-2 Page No:47Item No:8.33.3) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 145.95 | 145.95 | 42.21 | False | None | None | False | None | False | 6160.5495 | 0 |
| 3799747 | 144121 | None | PWD CSR-2023-24 I.No.8.2.2 Volu | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD CSR-2023-24 I.No.8.2.2 Volume 2 ) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 292.95 | 292.95 | 198.14 | False | None | None | False | None | False | 58045.113 | 0 |
| 3799748 | 144121 | None | Vol-2 Page No:50 Item No:8.51 | Providing and applying white cement based putty of average thick ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Vol-2 Page No:50 Item No:8.51 ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 105.0 | 105.0 | 248.29 | False | None | None | False | None | False | 26070.45 | 0 |
| 3799749 | 144121 | None | PWD CSR-2023-24 I.No.8.8 Volume 2 page no 42 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 389.55 | 389.55 | 134.48 | False | None | None | False | None | False | 52386.684 | 0 |
| 3799750 | 144121 | None | Vol-2 Page No:46 Item No:8.33.1) | Finishing with Deluxe Multi surface paint system for interiors and exte riors using Primer as per manufacturers specifications: Two coats ap plied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 165.9 | 165.9 | 248.29 | False | None | None | False | None | False | 41191.311 | 0 |
| 3799751 | 144121 | None | Vol-2 Page No:46 Item No:8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paer smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 182.7 | 182.7 | 134.48 | False | None | None | False | None | False | 24569.496 | 0 |
| 3799752 | 144121 | None | Vol-2 Page No:61 Item No:9.17.2 | Providing vitrified tiles 60 x 60cms of approved make, shade and size for flooring laid on a bedof 12mm thick cement mortar 1:3 mix, flush pointing with white cement using colour pigment, including cost ofmaterials, labour, curing complete as per specification. etc., complete including cost and conveyance of all aterials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical detailed specification and design and directions of the Engineer-in-charge of the work ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1233.75 | 1233.75 | 66.29 | False | None | None | False | None | False | 81785.2875 | 0 |
| 3799753 | 144121 | None | Vol-2 I.No-9.36 | Providing flooring with 25mm thick polished Cuddapah slabs using cementmortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing,polishing complete as per specifications ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1732.5 | 1732.5 | 9.13 | False | None | None | False | None | False | 15817.725 | 0 |
| 3799754 | 144121 | None | Vol-2 Page No:60 Item No:9.11) | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 933.45 | 933.45 | 10.86 | False | None | None | False | None | False | 10137.267 | 0 |
| 3799755 | 144121 | None | Vol-2 Page No:60 Item No:9.11) | Wall Tiles Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1161.3 | 1161.3 | 15.8 | False | None | None | False | None | False | 18348.54 | 0 |
| 3799756 | 144121 | None | V-2 Page-83 Item No: 11.28) | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessoris such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Kg | 593.25 | 593.25 | 56.0 | False | None | None | False | None | False | 33222.0 | 0 |
| 3799757 | 144121 | None | V-2 Page-52 Item No: 8.70) | Painting (one coats) with black Japan paint of approved brand and manufacture to give an even shade. including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 71.4 | 71.4 | 4.5 | False | None | None | False | None | False | 321.3 | 0 |
| 3799758 | 144121 | None | v-5 sl no-656 | PVC pipe - OD 63mm and 6 Kg/sqcm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 92.4 | 92.4 | 16.0 | False | None | None | False | None | False | 1478.4 | 0 |
| 3799759 | 144121 | None | PWD SR 2023-24, Vol. 05, Item Code :10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.PVC pipes 110 mm dia., 6 kg/sqcm class 3 ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 431.55 | 431.55 | 10.0 | False | None | None | False | None | False | 4315.5 | 0 |
| 3799760 | 144121 | None | PWD SR 2023-24, Vol-2 Item Code: 13.31.5 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 40 mm nominal dia Pipes ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 562.8 | 562.8 | 30.0 | False | None | None | False | None | False | 16884.0 | 0 |
| 3799761 | 144121 | None | PWD SR 2023-24, Vol. 02, Page No 117, Item Code: 1 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 737.1 | 737.1 | 1.0 | False | None | None | False | None | False | 737.1 | 0 |
| 3799762 | 144121 | None | PWD SR 2023-24, Vol. 02, Item Code: 13.2.1 | Providing and fixing brass bib cock of approved quality : Providing and fixing brass stop cock of approved quality ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 300.3 | 300.3 | 4.0 | False | None | None | False | None | False | 1201.2 | 0 |
| 3799763 | 144121 | None | PWD SR 203-24, Vol. 02, Page No 131, Item Code: 14 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 5128.2 | 5128.2 | 1.0 | False | None | None | False | None | False | 5128.2 | 0 |
| 3799764 | 144121 | None | PWD SR 2023-24, Vol. 02, Page No 135, Item Code: 1 | Wash Basin Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings : Flat back wash basin of size 630x450 mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 1035.3 | 1035.3 | 1.0 | False | None | None | False | None | False | 1035.3 | 0 |
| 3799765 | 144121 | None | PWD SR 2023-24, Vol. 02, Page No A-39, Item Code: | Stainless steel kitchen sink - with drain board 510 x 1040mm bowl depth 200mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 3360.0 | 3360.0 | 1.0 | False | None | None | False | None | False | 3360.0 | 0 |
| 3799766 | 144121 | None | PWD SR 2023-24, Vol-2, Item Code: 13.34 ) | Sintex Tank Providing and placing on terrace ( at all floor levels), polyethylene water storage tanks, IS : 12701 marked with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Ltr | 9.45 | 9.45 | 500.0 | False | None | None | False | None | False | 4725.0 | 0 |
| 3799767 | 144121 | None | PWD SR 2023-24, Vol. 02, Item No: 15.11 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400 percent and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats 1.6 kg/m2to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer at 150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction,Bore Packing, treatment of construction joints
completely as per specification. (PWD SR 2023-24, Vol. 02, Item No: 15.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 857.85 | 857.85 | 77.19 | False | None | None | False | None | False | 66217.4415 | 0 |
| 3799768 | 144121 | None | PWD CSR-2023-24 I.No 8.69 Volume 2 page no 52 | Re-lettering with black Japan paint of approved brand and manufacture. to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Per cm Height Per Letter | 2.63 | 2.63 | 600.0 | False | None | None | False | None | False | 1578.0 | 0 |
| 3799769 | 144121 | None | PWD SR 2023-24, Vol. 05, Item No-13.40.1 | Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.2 HP, Size 65x50 Head 13M, Discharge 462 LPM ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 16390.5 | 16390.5 | 1.0 | False | None | None | False | None | False | 16390.5 | 0 |
| 3799770 | 144121 | None | V-06,1.2.1 | Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 69.3 | 69.3 | 35.0 | False | None | None | False | None | False | 2425.5 | 0 |
| 3799771 | 144121 | None | V-06,1.5.1 | Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 51.45 | 51.45 | 12.0 | False | None | None | False | None | False | 617.4 | 0 |
| 3799772 | 144121 | None | V-06,1.3.1 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 71.4 | 71.4 | 50.0 | False | None | None | False | None | False | 3570.0 | 0 |
| 3799773 | 144121 | None | V-06,1.13 | Supplying And Fixing Metal Fan Box with Round Hook. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 122.85 | 122.85 | 4.0 | False | None | None | False | None | False | 491.4 | 0 |
| 3799774 | 144121 | None | V-06,5.19.6 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Madeoutof14SWGMS enclosure.4Way SP&N ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 1600.2 | 1600.2 | 1.0 | False | None | None | False | None | False | 1600.2 | 0 |
| 3799775 | 144121 | None | V-06,3.4.3 | Supplying and flush mounting powder coated I galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 Way ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 185.85 | 185.85 | 1.0 | False | None | None | False | None | False | 185.85 | 0 |
| 3799776 | 144121 | None | V-06,3.4.5 | Supplying and flush mounting powder coated I galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 274.05 | 274.05 | 2.0 | False | None | None | False | None | False | 548.1 | 0 |
| 3799777 | 144121 | None | V-06,3.4.6 | Supplying and flush mounting powder coated I galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 334.95 | 334.95 | 2.0 | False | None | None | False | None | False | 669.9 | 0 |
| 3799778 | 144121 | None | V-06,3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4 Module ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 183.75 | 183.75 | 1.0 | False | None | None | False | None | False | 183.75 | 0 |
| 3799779 | 144121 | None | V-06,3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 Module ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 298.2 | 298.2 | 2.0 | False | None | None | False | None | False | 596.4 | 0 |
| 3799780 | 144121 | None | V-06,3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10-12 Module ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 361.2 | 361.2 | 2.0 | False | None | None | False | None | False | 722.4 | 0 |
| 3799781 | 144121 | None | V-06,3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 107.1 | 107.1 | 15.0 | False | None | None | False | None | False | 1606.5 | 0 |
| 3799782 | 144121 | None | V-06,3.6.3 | 6Amps 3way socket ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 179.55 | 179.55 | 4.0 | False | None | None | False | None | False | 718.2 | 0 |
| 3799783 | 144121 | None | V-06,3.6.4 | Stepped Fan Regulator ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 374.85 | 374.85 | 2.0 | False | None | None | False | None | False | 749.7 | 0 |
| 3799784 | 144121 | None | V-06,2.2.1 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch box ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Point | 282.45 | 282.45 | 4.0 | False | None | None | False | None | False | 1129.8 | 0 |
| 3799785 | 144121 | None | V-06,2.2.2 | Medium point above 3Mtr upto 6Mtrfrom tapping point to out let via switch box ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Point | 397.95 | 397.95 | 6.0 | False | None | None | False | None | False | 2387.7 | 0 |
| 3799786 | 144121 | None | V-06,2.2.3 | Long point above 6Mtr upto 1OMtr from tapping point to out let via switch box ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Point | 582.75 | 582.75 | 3.0 | False | None | None | False | None | False | 1748.25 | 0 |
| 3799787 | 144121 | None | V-06,2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 11OOV grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 sqmm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 27.3 | 27.3 | 180.0 | False | None | None | False | None | False | 4914.0 | 0 |
| 3799788 | 144121 | None | V-06,2.3.3 | 2.5 sqmm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 44.1 | 44.1 | 90.0 | False | None | None | False | None | False | 3969.0 | 0 |
| 3799789 | 144121 | None | V-06,2.3.4 | 4 sqmm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 66.15 | 66.15 | 25.0 | False | None | None | False | None | False | 1653.75 | 0 |
| 3799790 | 144121 | None | V-06,3.10.2 | Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws.80/90 mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 15.75 | 15.75 | 6.0 | False | None | None | False | None | False | 94.5 | 0 |
| 3799791 | 144121 | None | V-06,3.10.3 | 110 mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 22.05 | 22.05 | 4.0 | False | None | None | False | None | False | 88.2 | 0 |
| 3799792 | 144121 | None | V-06,5.18.1 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 435.75 | 435.75 | 1.0 | False | None | None | False | None | False | 435.75 | 0 |
| 3799793 | 144121 | None | V-06,3.14.6 | Supplying and fixing/replacing of 6/16/32Amps electrical
accessories on existing switch board.6A Pendant Holder ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 74.55 | 74.55 | 3.0 | False | None | None | False | None | False | 223.65 | 0 |
| 3799794 | 144121 | None | V-06,6.3.1 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 3133.2 | 3133.2 | 2.0 | False | None | None | False | None | False | 6266.4 | 0 |
| 3799795 | 144121 | None | V-06,11.3.1 | Supplying of .feet -PVC Batten with integrated LED tube.W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with Life of 25000 burning hours & 70% lumen maintenance with CRI 80 Power Input: 220-240V@ 50/60Hz & Power factor more than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 578.55 | 578.55 | 6.0 | False | None | None | False | None | False | 3471.3 | 0 |
| 3799796 | 144121 | None | v-06,13.7.1 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 128.1 | 128.1 | 6.0 | False | None | None | False | None | False | 768.6 | 0 |
| 3799797 | 144121 | None | v-06,13.10 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 179.55 | 179.55 | 2.0 | False | None | None | False | None | False | 359.1 | 0 |
| 3799798 | 144121 | None | VOL-06,13.1.1 | Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires.Using 25mm dia G.I.Pipe ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 1026.9 | 1026.9 | 1.0 | False | None | None | False | None | False | 1026.9 | 0 |
| 3799799 | 144121 | None | VOL-06,5.6.4 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.12" x 12" x 2" ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 190.05 | 190.05 | 1.0 | False | None | None | False | None | False | 190.05 | 0 |
| 3799800 | 144121 | None | VOL-06,5.30 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 1449.0 | 1449.0 | 1.0 | False | None | None | False | None | False | 1449.0 | 0 |
| 3799801 | 144121 | None | VOL-06,5.44.10 | Supply and Installation /Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase /Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300 mm x 300 mm x 214 mm ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 4737.6 | 4737.6 | 1.0 | False | None | None | False | None | False | 4737.6 | 0 |
| 3799802 | 144121 | None | VOL-6,51.05 | Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and
3300 mm depth and using 50x6 mm flat welded to
ground rod as terminal & connected to equipment
ground terminal using PVC Al wire as specified BESCOM PART 3 ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 2280.6 | 2280.6 | 2.0 | False | None | None | False | None | False | 4561.2 | 0 |
| 3799803 | 144121 | None | VOL-06,51.05 | Bentonite clay slurry for earthing in 50 Kg Bag BESCOM PART 3 ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Bag | 386.4 | 386.4 | 1.0 | False | None | None | False | None | False | 386.4 | 0 |
| 3799804 | 144121 | None | VOL-06,51.02 | Good Quality well burnt Charcoal for grounding
purposes packed in non returnable gunny bag of 30 Kg each1 ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 709.8 | 709.8 | 1.0 | False | None | None | False | None | False | 709.8 | 0 |
| 3799805 | 144121 | None | VOL-06,51.03 | Good Quality Salt for grounding purposes packed in 50 Kg gunny bag ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Bag | 325.5 | 325.5 | 1.0 | False | None | None | False | None | False | 325.5 | 0 |
| 3799806 | 144121 | None | VOL-06,11.8.2 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hrLumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor more than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site located with .W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency &Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Streetlight 40W ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 4225.2 | 4225.2 | 2.0 | False | None | None | False | None | False | 8450.4 | 0 |
| 3799807 | 144121 | None | VOL-06,48.03 | 1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single
Core Lead wires as per IS-694: 2010 ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Coil | 2189.25 | 2189.25 | 1.0 | False | None | None | False | None | False | 2189.25 | 0 |
| 3799808 | 144121 | None | Vol-2 Page No:86 Item No:11.34 A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(Vol-2 Page No:86 Item No:11.34 A) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Kg | 176.4 | 176.4 | 250.2 | False | None | None | False | None | False | 44135.28 | 0 |
| 3799809 | 144121 | None | Vol-2 Page No:86 Item No:11.31 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including cost of materials, labour, usage charges of machinery complete as per specifications.(Vol-2 Page No:86 Item No:11.31) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Kg | 120.75 | 120.75 | 200.16 | False | None | None | False | None | False | 24169.32 | 0 |
| 3799810 | 144121 | None | PWD CSR-2023-24 I.No.12.54 Volume 2 page no 104 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. (PWD CSR-2023-24 I.No.12.54 Volume 2 page no 104) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | m | 333.9 | 333.9 | 4.75 | False | None | None | False | None | False | 1586.025 | 0 |
| 3799811 | 144121 | None | PWD CSR-2023-24 I.No.12.55.2 Volume 2 page no 104 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. (PWD CSR-2023-24 I.No.12.55.2 Volume 2 page no 104) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 2142.0 | 2142.0 | 1.58 | False | None | None | False | None | False | 3384.36 | 0 |
| 3799812 | 144121 | None | Vol-5 Page No:85, Item No:7.30 | Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.(Vol-5 Page No:85, Item No:7.30) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 2530.5 | 2530.5 | 1.0 | False | None | None | False | None | False | 2530.5 | 0 |
| 3799813 | 144121 | None | PWD SR 2023-24, Vol. 02, Item No-13.57 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including PVC (S.W.R) drain pipe 100 mm diameter and 1.20 m long complete as per standard design.( PWD SR 2023-24, Vol. 02, Item No-13.57) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 2964.15 | 2964.15 | 1.0 | False | None | None | False | None | False | 2964.15 | 0 |
| 3799814 | 144121 | None | PWD SR 2023-24, Vol. 03, Item No-6.8.1 | Precast Cement Concrete Interlocking Blocks Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification)( PWD SR 2023-24, Vol. 03, Item No-6.8.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1121.4 | 1121.4 | 27.75 | False | None | None | False | None | False | 31118.85 | 0 |