createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1723641529971 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 41500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 29-08-2024 16:30:00 tenderQueryClose 28-08-2024 16:00:00 technicalBidOpen 30-08-2024 17:00:00 publishedDate 14-08-2024 19:28:13 publishedByPost TP_CO_MNGL publishedByUser KPE13266 - SHABBIR IBRAHIM REVOORKAR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Town Panchayat Managuli splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9448528099 tenderSupplierList None
tenderSchedule	createdTs 1723641530000 version 4 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT26715 title Construction of security room water sump and borewell at SWM site in Managuli description Construction of security room water sump and borewell at SWM site in Managuli category WORKS categoryText Works ecv 1630142.68 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2253 locationName DMA Town Panchayat Managooli provisionalAmount 1660000.0 groupOverheadTotal 248665.83 fileNumber DUDC/TP/MNGL/SBM/2023-24/11
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1723641530000 0 None None Buildings Construction of security room water sump and borewell at SWM site in Managuli 1381476.85 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3781846 142858 None code01 Earth Work Excavation Mechanical :Earth work excavation for Foundation by mechanical means for all works & depth up to 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift up to 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work ( In all kinds of soils Depth upto 3 m) Cum 105.06 105.06 53.5 False None None False None False 5620.71 0 3781847 142858 None code02 Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be recovered @ Rs. 60.00/m3) Cum 122.57 122.57 70.65 False None None False None False 8659.5705 0 3781848 142858 None code03 KSRB 2.10: Providing sand cement bed with all leads for all materials and lift of 1.5 m, machine mixed, laid in layers of 15cms. thick and well compacted for foundation, including curing cost of materials labour and HOM complete as per specifications.specification No. KBS 2.10.2-do-sand cement bed with 5% cement/Cum Cum 3085.88 3085.88 42.39 False None None False None False 130810.4532 0 3781849 142858 None code04 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6168.67 6168.67 2.27 False None None False None False 14002.8809 0 3781850 142858 None code05 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators,including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates Cum 6475.61 6475.61 2.92 False None None False None False 18908.7812 0 3781851 142858 None code06 Form Work As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Footing. consider 8% Cum 518.05 518.05 2.92 False None None False None False 1512.706 0 3781852 142858 None code07 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinthlevel with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5779.33 5779.33 13.83 False None None False None False 79928.1339 0 3781853 142858 None code08 Providing and laying in position Reinforced cement concrete for all superstructures of building, Road works, Water works, Irrigation works & superstructure works of bridges upto 3.50m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials,quality confirming to the requirements of relevant IS codes,labour,Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) -do- M20 Design Mix Using 20mm nominal size graded crushed coarse aggregates Cum 6828.9 6828.9 18.668 False None None False None False 127481.9052 0 3781854 142858 None code09 Form Work As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For Staircase and other similar structures 50% Cum 3237.8 3237.8 15.4279 False None None False None False 49952.45462 0 3781855 142858 None code10 Form Work As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For RCC Beams, Lintels & Troughs of Aqueducts 50% Cum 3414.45 3414.45 3.57 False None None False None False 12189.5865 0 3781856 142858 None code11 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings Tonne 81381.33 81381.33 1.57 False None None False None False 127768.6881 0 3781857 142858 None code12 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8217.34 8217.34 22.58 False None None False None False 185547.5372 0 3781858 142858 None code13 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 248.23 248.23 220.53 False None None False None False 54742.1619 0 3781859 142858 None code14 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 91.67 91.67 220.53 False None None False None False 20215.9851 0 3781860 142858 None code15 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).** Size of Tile 600x600 mm Sqm 1275.14 1275.14 13.59 False None None False None False 17329.1526 0 3781861 142858 None code16 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, FumeRed Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete Sqm 1108.28 1108.28 25.7 False None None False None False 28482.796 0 3781862 142858 None code17 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. m 215.27 215.27 39.29 False None None False None False 8457.9583 0 3781863 142858 None code18 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance1mm), with wall thickness 2.0 mm 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitered and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge m 198.0 198.0 12.0 False None None False None False 2376.0 0 3781864 142858 None code19 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour andapproved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. Sqm 3300.12 3300.12 3.78 False None None False None False 12474.4536 0 3781865 142858 None code20 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 123.6 123.6 48.0 False None None False None False 5932.8 0 3781866 142858 None code21 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 54.59 54.59 220.53 False None None False None False 12038.7327 0 3781867 142858 None code22 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life Sqm 162.74 162.74 220.53 False None None False None False 35889.0522 0 3781868 142858 None code23 Painting with oil type wood preservative of approved brand and manu facture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer- Sqm 41.2 41.2 220.53 False None None False None False 9085.836 0 3781869 142858 None code24 Varnishing with varnish of approved brand and manufacture: One coats with spar varnish including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer in-charge Sqm 71.07 71.07 39.29 False None None False None False 2792.3403 0 3781870 142858 None code25 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE ( Thermos Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-honeycomb structure inside in lieu of GI reinforcement. Sqm 5173.69 5173.69 14.4 False None None False None False 74501.136 0 3781871 142858 None code26 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). 20mm dia m 223.51 223.51 10.0 False None None False None False 2235.1 0 3781872 142858 None code27 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. 25mm dia m 304.88 304.88 15.0 False None None False None False 4573.2 0 3781873 142858 None code28 Providing and placing on terrace (at all floor levels), polyethylene water storage tanks IS:12701 marked, with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, But without Fittings and the base support ofr tank. l 9.27 9.27 1000.0 False None None False None False 9270.0 0 3781874 142858 None code29 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5030.52 5030.52 1.0 False None None False None False 5030.52 0 3781875 142858 None code30 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 2637.83 2637.83 1.0 False None None False None False 2637.83 0 3781876 142858 None code31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete Each 1048.54 1048.54 1.0 False None None False None False 1048.54 0 3781877 142858 None code32 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: m 423.33 423.33 15.0 False None None False None False 6349.95 0 3781878 142858 None code33 Providing & Fixing brass bib cock of approved quality Each 314.15 314.15 2.0 False None None False None False 628.3 0 3781879 142858 None code34 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore Each 341.96 341.96 2.0 False None None False None False 683.92 0 3781880 142858 None code35 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Each 834.3 834.3 2.0 False None None False None False 1668.6 0 3781881 142858 None code36 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Each 94.76 94.76 2.0 False None None False None False 189.52 0 3781882 142858 None code37 Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy Each 4104.55 4104.55 1.0 False None None False None False 4104.55 0 3781883 142858 None code38 Concealed Conduit System: Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20 mm dia 2 mm thick m 66.0 66.0 15.0 False None None False None False 990.0 0 3781884 142858 None code39 Short point upto 3m from tapping point to out let via switch Point 285.0 285.0 2.0 False None None False None False 570.0 0 3781885 142858 None code40 Medium point above 3m upto 6m from tapping point to out let via switch Point 394.0 394.0 3.0 False None None False None False 1182.0 0 3781886 142858 None code41 1.5 mm2 m 19.0 19.0 50.0 False None None False None False 950.0 0 3781887 142858 None code42 2.5 mm2 m 26.0 26.0 30.0 False None None False None False 780.0 0 3781888 142858 None code43 1-3 Way Each 138.0 138.0 2.0 False None None False None False 276.0 0 3781889 142858 None code44 6 Way Each 220.0 220.0 2.0 False None None False None False 440.0 0 3781890 142858 None code45 1 to 3 Module Each 137.0 137.0 2.0 False None None False None False 274.0 0 3781891 142858 None code46 4 Module Each 175.0 175.0 2.0 False None None False None False 350.0 0 3781892 142858 None code47 6 Module Each 234.0 234.0 2.0 False None None False None False 468.0 0 3781893 142858 None code48 6Amps One Way Switch Each 102.0 102.0 10.0 False None None False None False 1020.0 0 3781894 142858 None code49 6A Three Way socket Each 166.0 166.0 2.0 False None None False None False 332.0 0 3781895 142858 None code50 Stepped Fan Regulator Two Module Each 276.0 276.0 1.0 False None None False None False 276.0 0 3781896 142858 None code51 6/16A Universal Socket Each 236.0 236.0 4.0 False None None False None False 944.0 0 3781897 142858 None code52 32A DP Switch Each 326.0 326.0 1.0 False None None False None False 326.0 0 3781898 142858 None code53 6A Bakelite Ceiling Rose No 78.0 78.0 5.0 False None None False None False 390.0 0 3781899 142858 None code54 6A Lamp Holder No 71.0 71.0 5.0 False None None False None False 355.0 0 3781900 142858 None code55 Supplying & fixing of retrofit type - LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70. efficacy 80 lumen per W, life 25000 burning hours and Compliance condition. 12W, 6500K Each 269.0 269.0 8.0 False None None False None False 2152.0 0 3781901 142858 None code56 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model Each 2984.0 2984.0 2.0 False None None False None False 5968.0 0 3781902 142858 None code57 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, deliveringsuperior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, LED Streetlight 90 W No 5992.0 5992.0 1.0 False None None False None False 5992.0 0 3781903 142858 None code58 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clA, bolts, and nuts and wiring using suitable capacity wires. Using 32mm dia G.I.Pipe Each 1045.0 1045.0 1.0 False None None False None False 1045.0 0 3781904 142858 None code59 Fixing all types and all capacities of fluorescent /false ceiling /spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders Each 122.0 122.0 5.0 False None None False None False 610.0 0 3781905 142858 None code60 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 315.0 315.0 1.0 False None None False None False 315.0 0 3781906 142858 None code61 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. Each 6086.0 6086.0 1.0 False None None False None False 6086.0 0 3781907 142858 None code62 Supplying and fixing of Shunt trip suitable for MCCB.CBCT Each 1703.0 1703.0 1.0 False None None False None False 1703.0 0 3781908 142858 None code63 6-32 Amps SP Each 415.0 415.0 5.0 False None None False None False 2075.0 0 3781909 142858 None code64 6-32 Amps DP Each 739.0 739.0 5.0 False None None False None False 3695.0 0 3781910 142858 None code65 6-32 Amps TPN Each 1717.0 1717.0 1.0 False None None False None False 1717.0 0 3781911 142858 None code66 G I Grounding pipe, B-Class, 42 mm dia, 2.50 Mtr long, 3.2 mm thick with bolt, nut, GI strips and washers complete . Minimum weight of GI pipe : 7.3 Kg. No 743.0 743.0 1.0 False None None False None False 743.0 0 3781912 142858 None code67 Good quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. No 676.0 676.0 1.0 False None None False None False 676.0 0 3781913 142858 None code68 Good quality Salt for grounding purposes packed in 50 Kg gunny bag. Bag 310.0 310.0 1.0 False None None False None False 310.0 0 3781914 142858 None code69 Digging pit for G I Pipe tye earthing in Hard soil Per Pit 759.0 759.0 1.0 False None None False None False 759.0 0 3781915 142858 None code70 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. 5.00 HP - 135 LPM @ 84 m = 12 STG Outlet Dia - 2.00" (Item-13.13.4 page-151 of Common SR Volume - V,2023-24) Each 28837.0 28837.0 1.0 False None None False None False 28837.0 0 3781916 142858 None code71 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 m2 (Item-13.22, Page-154 of Common SR Volume - V, 2023-24) m 135.0 135.0 170.0 False None None False None False 22950.0 0 3781917 142858 None code72 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S-D- Star Delta Starter 6 to 15 HP pumps (Item-13.23.2, Page-155 of Common SR Volume - V, 2023-24) Each 9550.0 9550.0 1.0 False None None False None False 9550.0 0 3781918 142858 None code73 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. (Item-13.25, Page-155 of Common SR Volume - V, 2023-24) Kvar 550.0 550.0 1.0 False None None False None False 550.0 0 3781919 142858 None code74 MCB:Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box.(Item-13.26, Page-155 of Common SR Volume - V, 2023-24) Per 3 Poles 1150.0 1150.0 1.0 False None None False None False 1150.0 0 3781920 142858 None code75 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring, freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments (Item-13.28, Page-155 of Common SR Volume - V, 2023-24) m 575.0 575.0 150.0 False None None False None False 86250.0 0 3781921 142858 None code76 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. (Item-32, Page-163 of Common SR Volume - V, 2021-22) Job 6150.0 6150.0 1.0 False None None False None False 6150.0 0 3781922 142858 None code77 Labor charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipment's, m 165.0 165.0 10.0 False None None False None False 1650.0 0 3781923 142858 None code78 Providing main connection from pole PVC insulated sheathed steel wire cable in GI pipe as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit (Item-13.37, Page-156 of Common SR Volume - V, 2023-24) m 85.0 85.0 15.0 False None None False None False 1275.0 0 3781924 142858 None code79 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: (Above 300m of drilling add 10% for every 50m depth)Upto 50m depth m 309.0 309.0 50.0 False None None False None False 15450.0 0 3781925 142858 None code80 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: (Above 300m of drilling add 10% for every 50m depth) above 50m and upto100m depth m 387.0 387.0 50.0 False None None False None False 19350.0 0 3781926 142858 None code81 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: (Above 300m of drilling add 10% for every 50m depth) above 100m and upto 150m depth m 412.0 412.0 50.0 False None None False None False 20600.0 0 3781927 142858 None code82 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. (Item-12.32 Page-143 of Common SR Volume - V, 2023-24) m 1933.0 1933.0 20.0 False None None False None False 38660.0 0 3781928 142858 None code83 Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ( Item-12.34 Page-143 of Common SR Volume - V, 2023-24) Each 164.0 164.0 1.0 False None None False None False 164.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1723641532000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1723641532000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1723641532000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1723641532000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1723641532000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Department Registration Details None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing work None None None None None None List of works for which tenders already submitted None None None None None None Banker Details None None None None None None class 2 pwd licence Others class 2 pwd licence createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV)
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate False Technical Bid GST and PAN Card True Technical Bid LOC 30 percent an amount as per KW1 Book late True Technical Bid satisfactory completed as a prime contractor at least one similar work to an extent of 50percent of the cost of similar work of Quantity wise such as Excavation,PCC,RCC,Steel,plaster Etc True Technical Bid Incase Contractor participating in the tendor submit a lower rate. the difference amount shall be paid in advance as security deposit in any nationalized bank True Technical Bid Class-2 and above KPWD Registration Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None