| 1723544163000 | 0 | None | None | Bridge cum Barrages | CONSTRUCTION OF CHECK DAM FOR TELSANG PIT IN TELSANG VILLAGE IN ATHANI TALUKA OF BELAGAVI DIST. | 669776.82 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3768107 | 141899 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work etc complete as per direction of the Engineer incharge of the work. | Cum | 102.0 | 102.0 | 63.9 | False | None | None | False | None | False | 6517.8 | 0 | | 3768108 | 141899 | None | code02 | Preparing foundation bed for masonry or concrete by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and water jet including cost 2 DAM AND ALLIED WORKS WRD: 2. DAM AND ALLIED WORKS SCHEDULE OF RATES Brief description of work directed and cleaning the surface with air and water jet including cost of all materials, machinery, labour etc., complete with all lead and all lifts etc complete as per direction of the Engineer incharge of the work. | Sqm | 55.0 | 55.0 | 67.8 | False | None | None | False | None | False | 3729.0 | 0 | | 3768109 | 141899 | None | code03 | Providing and laying in-situ vibrated M-20 ( 28 days cube compressive 2.13. strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for RCC works of gallery, sluice, spillway crest, spillway d / s face, energy dissipating structures, training walls, piers, abutments and such other locations including cost of all materials,machinery,labour,formwork, centering, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with all lead and lifts. etc complete as per direction of the Engineer incharge of the work. | Cum | 6254.0 | 6254.0 | 46.32 | False | None | None | False | None | False | 289685.28 | 0 | | 3768110 | 141899 | None | code04 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all otherProviding and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Appartances required completely work as per technical Specification etc complete as per direction of the Engineer incharge of the work. etc complete as per direction of the Engineer incharge of the work. | Cum | 6336.0 | 6336.0 | 39.78 | False | None | None | False | None | False | 252046.08 | 0 | | 3768111 | 141899 | None | code05 | Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. etc complete as per direction of the Engineer incharge of the work. | Tonne | 88842.0 | 88842.0 | 0.861 | False | None | None | False | None | False | 76492.962 | 0 | | 3768112 | 141899 | None | code06 | Providing and fixing M.S. Channel frame to suite the suitable size of gates. The side channels with suitable height with hold fasts 12mm dia and 0.5m long M.S. Bar at 0.50 m c/c with suitable size bottom channel including cost of all materials including two coats of anti corrosive paint over a coat of primer etc., complete with all lead and lifts etc complete as per direction of the Engineer incharge of the work. | Cum | 84.0 | 84.0 | 96.64 | False | None | None | False | None | False | 8117.76 | 0 | | 3768113 | 141899 | None | code07 | Providing ,Supplying and fixing M.S. gates of size 1.62m*1.2m with 6mm thick M.S. plate with and stiffners (2 Nos) horizontal bracing 6 Nos. of ISMC 75*40 including providing rubber guard of ISA 20*4 for providing rubber of approved Quality for bottom & two sides fixed to grove of M.S. gate of size 25 mm . 25mm with machine screw nuts and bolts of size 6mm dia & 35mm long and providing 16mm dia MS bar handles (4 Nos) suitably welded to horizontal bracing including two coats of anticorrosive bituminous paint over a cost of primer complete with all lead and lifts etc complete as per direction of the Engineer incharge of the work. | Tonne | 173.0 | 173.0 | 73.93 | False | None | None | False | None | False | 12789.89 | 0 | | 3768114 | 141899 | None | code08 | Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials, machinery, labour, laying to specified slope, wedging with chips, finishing etc., complete with all lead and lifts. etc complete as per direction of the Engineer incharge of the work. | Sqm | 735.0 | 735.0 | 12.0 | False | None | None | False | None | False | 8820.0 | 0 | | 3768115 | 141899 | None | code09 | Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour etc., complete with all lead and lifts. etc complete as per direction of the Engineer incharge of the work. | Rmtr | 337.0 | 337.0 | 7.65 | False | None | None | False | None | False | 2578.05 | 0 | | 3768116 | 141899 | None | code10 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804.etc complete as per direction of the Engineer incharge of the work. | No | 9000.0 | 9000.0 | 1.0 | False | None | None | False | None | False | 9000.0 | 0 |
|