| 3817860 | 145156 | None | code01 | A - CIVIL WORKS :
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth | Cum | 80.53 | 80.53 | 68.0 | False | None | None | False | None | False | 5476.04 | 0 |
| 3817861 | 145156 | None | code02 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 90.44 | 90.44 | 82.0 | False | None | None | False | None | False | 7416.08 | 0 |
| 3817862 | 145156 | None | code03 | In ordinary/soft rock without blasting upto 1.5 m depth | Cum | 337.0 | 337.0 | 21.0 | False | None | None | False | None | False | 7077.0 | 0 |
| 3817863 | 145156 | None | code04 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m | Cum | 230.45 | 230.45 | 47.0 | False | None | None | False | None | False | 10831.15 | 0 |
| 3817864 | 145156 | None | code05 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 252.75 | 252.75 | 149.0 | False | None | None | False | None | False | 37659.75 | 0 |
| 3817865 | 145156 | None | code06 | Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour with lead and lift complete as per specifications. | Cum | 3173.07 | 3173.07 | 27.0 | False | None | None | False | None | False | 85672.89 | 0 |
| 3817866 | 145156 | None | code07 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications including cost of formwork. (The cost of steel reinforcement shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6450.23 | 6450.23 | 37.1 | False | None | None | False | None | False | 239303.533 | 0 |
| 3817867 | 145156 | None | code08 | Providing and laying in position Reinforced/ Plain cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications including cost of formwork. (The cost of steel reinforcement shall be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Upto 3.50m Level | Cum | 7649.58 | 7649.58 | 2.0 | False | None | None | False | None | False | 15299.16 | 0 |
| 3817868 | 145156 | None | code09 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications including cost of formwork. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates '--do-- for Column Footings / Retaining Wall Footings / Raft / Base Slab | Cum | 7778.38 | 7778.38 | 38.0 | False | None | None | False | None | False | 295578.44 | 0 |
| 3817869 | 145156 | None | code10 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications including cost of formwork. (The cost of steel reinforcement shall be paid separately)
M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
--do-- for RCC Walls with M-25 | Cum | 8430.89 | 8430.89 | 3.0 | False | None | None | False | None | False | 25292.67 | 0 |
| 3817870 | 145156 | None | code11 | do fo Plinth Beam with M 25 | Cum | 11117.54 | 11117.54 | 6.0 | False | None | None | False | None | False | 66705.24 | 0 |
| 3817871 | 145156 | None | code12 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications including cost of formwork. (The cost of steel reinforcement shall be paid separately)
M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
'--do-- for Column/Pedestal with M-25.
Upto 3.50m Level | Cum | 13029.57 | 13029.57 | 10.0 | False | None | None | False | None | False | 130295.7 | 0 |
| 3817872 | 145156 | None | code13 | Above 3.50m to 7.00m Level | Cum | 13159.86 | 13159.86 | 6.0 | False | None | None | False | None | False | 78959.16 | 0 |
| 3817873 | 145156 | None | code14 | Above 7.00m to 10.50m Level | Cum | 13290.16 | 13290.16 | 2.0 | False | None | None | False | None | False | 26580.32 | 0 |
| 3817874 | 145156 | None | code15 | do for Lintel / Tie Beam with M-25
Upto 3.50m Level | Cum | 12263.12 | 12263.12 | 4.0 | False | None | None | False | None | False | 49052.48 | 0 |
| 3817875 | 145156 | None | code16 | Above 7.00m to 10.50m Level | Cum | 12508.38 | 12508.38 | 4.0 | False | None | None | False | None | False | 50033.52 | 0 |
| 3817876 | 145156 | None | code17 | do for Chejja with M-25.
Upto 3.50m Level | Cum | 10746.96 | 10746.96 | 2.0 | False | None | None | False | None | False | 21493.92 | 0 |
| 3817877 | 145156 | None | code18 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
Upto 3.50m Level | Kgs | 113.98 | 113.98 | 6720.0 | False | None | None | False | None | False | 765945.6 | 0 |
| 3817878 | 145156 | None | code19 | Above 3.50m to 7.00m Level | Kgs | 115.13 | 115.13 | 1140.0 | False | None | None | False | None | False | 131248.2 | 0 |
| 3817879 | 145156 | None | code20 | Above 7.00m to 10.50m Level | Kgs | 116.26 | 116.26 | 1020.0 | False | None | None | False | None | False | 118585.2 | 0 |
| 3817880 | 145156 | None | code21 | Providing and constructing granite / trap / basalt size stone masonry with hard stone in foundation & plinth in cement mortar 1:6, stones in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. | Cum | 5885.25 | 5885.25 | 32.0 | False | None | None | False | None | False | 188328.0 | 0 |
| 3817881 | 145156 | None | code22 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Upto 3.50m Level | Sqm | 1481.84 | 1481.84 | 147.0 | False | None | None | False | None | False | 217830.48 | 0 |
| 3817882 | 145156 | None | code23 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation com- plete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Upto 3.50m Level | Sqm | 3109.89 | 3109.89 | 36.0 | False | None | None | False | None | False | 111956.04 | 0 |
| 3817883 | 145156 | None | code24 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. Upto 3.50m Level | Kgs | 563.74 | 563.74 | 208.0 | False | None | None | False | None | False | 117257.92 | 0 |
| 3817884 | 145156 | None | code25 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
Upto 3.50m Level | Sqm | 988.72 | 988.72 | 26.0 | False | None | None | False | None | False | 25706.72 | 0 |
| 3817885 | 145156 | None | code26 | Providing & fixing SS fly proof wire gauze to windows, clerestory windows & doors to exsisting aluminium frame. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
Upto 3.50m Level | Sqm | 985.0 | 985.0 | 13.0 | False | None | None | False | None | False | 12805.0 | 0 |
| 3817886 | 145156 | None | code27 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding / Aluminium Windows with Holdfast embeded in masonry
Upto 3.50m Level | Kgs | 179.65 | 179.65 | 545.0 | False | None | None | False | None | False | 97909.25 | 0 |
| 3817887 | 145156 | None | code28 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to Ceiling / Concrete / brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
Upto 3.50m Level | Sqm | 339.48 | 339.48 | 39.0 | False | None | None | False | None | False | 13239.72 | 0 |
| 3817888 | 145156 | None | code29 | Above 3.50m to 7.00m Level | Sqm | 342.88 | 342.88 | 51.0 | False | None | None | False | None | False | 17486.88 | 0 |
| 3817889 | 145156 | None | code30 | Above 10.50m to 14.00m Level | Sqm | 346.27 | 346.27 | 72.0 | False | None | None | False | None | False | 24931.44 | 0 |
| 3817890 | 145156 | None | code31 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Upto 3.50m Level | Sqm | 364.26 | 364.26 | 137.0 | False | None | None | False | None | False | 49903.62 | 0 |
| 3817891 | 145156 | None | code32 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
Upto 3.50m Level | Sqm | 398.95 | 398.95 | 233.0 | False | None | None | False | None | False | 92955.35 | 0 |
| 3817892 | 145156 | None | code33 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 20 mm to 25 mm wide to required depth. Upto 3.50m Level | Mtr | 63.18 | 63.18 | 172.0 | False | None | None | False | None | False | 10866.96 | 0 |
| 3817893 | 145156 | None | code34 | Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge.
Upto 3.50m Level | Sqm | 873.49 | 873.49 | 120.0 | False | None | None | False | None | False | 104818.8 | 0 |
| 3817894 | 145156 | None | code35 | Providing Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement :3 coarse sand), finished with a floating coat of neat cement. - 15 mm thick Upto 3.50m Level | Sqm | 474.53 | 474.53 | 14.0 | False | None | None | False | None | False | 6643.42 | 0 |
| 3817895 | 145156 | None | code36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Upto 3.50m Level | Sqm | 102.83 | 102.83 | 137.0 | False | None | None | False | None | False | 14087.71 | 0 |
| 3817896 | 145156 | None | code37 | Above 3.50m to 7.00m Level | Sqm | 103.86 | 103.86 | 51.0 | False | None | None | False | None | False | 5296.86 | 0 |
| 3817897 | 145156 | None | code38 | Above 7.00m to 10.50m Level | Sqm | 104.89 | 104.89 | 72.0 | False | None | None | False | None | False | 7552.08 | 0 |
| 3817898 | 145156 | None | code39 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
Upto 3.50m Level | Sqm | 146.2 | 146.2 | 137.0 | False | None | None | False | None | False | 20029.4 | 0 |
| 3817899 | 145156 | None | code40 | Above 3.50m to 7.00m Level | Sqm | 147.66 | 147.66 | 51.0 | False | None | None | False | None | False | 7530.66 | 0 |
| 3817900 | 145156 | None | code41 | Above 7.00m to 10.50m Level | Sqm | 149.12 | 149.12 | 72.0 | False | None | None | False | None | False | 10736.64 | 0 |
| 3817901 | 145156 | None | code42 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
Upto 3.50m Level | Sqm | 138.76 | 138.76 | 209.0 | False | None | None | False | None | False | 29000.84 | 0 |
| 3817902 | 145156 | None | code43 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Upto 3.50m Level | Sqm | 131.33 | 131.33 | 118.0 | False | None | None | False | None | False | 15496.94 | 0 |
| 3817903 | 145156 | None | code44 | Above 7.00m to 10.50m Level | Sqm | 133.96 | 133.96 | 1453.0 | False | None | None | False | None | False | 194643.88 | 0 |
| 3817904 | 145156 | None | code45 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including joining with seal ring conforming to to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes 100mm diameter
Upto 3.50m Level | Mtr | 313.46 | 313.46 | 8.0 | False | None | None | False | None | False | 2507.68 | 0 |
| 3817905 | 145156 | None | code46 | Above 3.50m to 7.00m Level | Mtr | 316.6 | 316.6 | 7.0 | False | None | None | False | None | False | 2216.2 | 0 |
| 3817906 | 145156 | None | code47 | Above 7.00m to 10.50m Level | Mtr | 319.73 | 319.73 | 2.0 | False | None | None | False | None | False | 639.46 | 0 |
| 3817907 | 145156 | None | code48 | Providing and fixing Steel work in built up tubular trusses (round, square or rectangular hollow tubes etc.) etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications andas per directions of the Engineer-in-Charge.Upto 3.50m Level | Kgs | 175.93 | 175.93 | 420.0 | False | None | None | False | None | False | 73890.6 | 0 |
| 3817908 | 145156 | None | code49 | Above 7.00m to 10.50m Level | Kgs | 179.45 | 179.45 | 5810.0 | False | None | None | False | None | False | 1042604.5 | 0 |
| 3817909 | 145156 | None | code50 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Above 7.00m to 10.50m Level | Sqm | 702.66 | 702.66 | 138.0 | False | None | None | False | None | False | 96967.08 | 0 |
| 3817910 | 145156 | None | code51 | do For Cladding Sheet - Above 3.50m to 7.00m Level | Sqm | 800.13 | 800.13 | 110.0 | False | None | None | False | None | False | 88014.3 | 0 |
| 3817911 | 145156 | None | code52 | Above 7.00m to 10.50m Level | Sqm | 808.06 | 808.06 | 86.0 | False | None | None | False | None | False | 69493.16 | 0 |
| 3817912 | 145156 | None | code53 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) Above 7.00m to 10.50m Level | Mtr | 1080.53 | 1080.53 | 24.0 | False | None | None | False | None | False | 25932.72 | 0 |
| 3817913 | 145156 | None | code54 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5"" or 4.2"" or 6"") or step-down (2"" or 3"" or 6"" ) as specified Above 7.00m to 10.50m Level | Sqm | 1228.39 | 1228.39 | 14.0 | False | None | None | False | None | False | 17197.46 | 0 |
| 3817914 | 145156 | None | code55 | Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge. | Cum | 7681.79 | 7681.79 | 7.0 | False | None | None | False | None | False | 53772.53 | 0 |
| 3817915 | 145156 | None | code56 | Providing and injecting chemical emulsion for Preconstructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable concentrates of 20% concentration, including cost of chemical, diluting in water to one percent concentration, labour, HOM of equipments, complete as per specifications. (Plinth area of the building at ground floor only shall be measured ) | Sqm | 117.7 | 117.7 | 195.0 | False | None | None | False | None | False | 22951.5 | 0 |
| 3817916 | 145156 | None | code57 | P/F. wind driven Turbo Ventilator of 600mm dia over sheet roof manufactured out of high grade aluminium & stainless steel with all necessary fixing accessories as per manufacturers specifications. | Nos | 9113.14 | 9113.14 | 2.0 | False | None | None | False | None | False | 18226.28 | 0 |
| 3817917 | 145156 | None | code58 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking to the appropriate disposal area as per direction of Engineer-in-charge. work beyond 10m span and height above 5.0m | Kgs | 4.83 | 4.83 | 4000.0 | False | None | None | False | None | False | 19320.0 | 0 |
| 3817918 | 145156 | None | code59 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. In cement mortar | Cum | 977.57 | 977.57 | 22.5 | False | None | None | False | None | False | 21995.325 | 0 |
| 3817919 | 145156 | None | code60 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in-=charge. | Cum | 1598.31 | 1598.31 | 22.5 | False | None | None | False | None | False | 35961.975 | 0 |
| 3817920 | 145156 | None | code61 | Dispoasal of Debris using 3 to 3.5 cum capacity vehicle as directed by Engineer- in charge. | Cum | 885.0 | 885.0 | 45.0 | False | None | None | False | None | False | 39825.0 | 0 |
| 3817921 | 145156 | None | code62 | B - ELECTRICAL WORKS ( LT Internal Works Only )
1.0 DISTRIBUTION BOARDS: Supplying and fixing regular MCB distribution boards on wall/wood board/ flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase/ double door with powder coated painting made out of 14 SWG MS enclosure etc, complete as required.
LPDB -Service shed: 8 Way SPN MCB DB
Incomer : 1 No. 32A DP MCB
Outgoings : a) 6Nos. of 6/10A SP MCBs | Set | 7004.48 | 7004.48 | 1.0 | False | None | None | False | None | False | 7004.48 | 0 |
| 3817922 | 145156 | None | code63 | INTERNAL ELECTRICAL WORKS : Concealed conduit system : Supplying and fixing of PVC conduit of 20 mm dia, 2mm thick in the concealed slab / groove cutting including required bends and accessories, including supply and wiring of 2 x 1.5Sq mm + 1 x 1.0Sq mm FRLS PVC insulated copper wires for point wiring etc. complete as requiredTwo in a row above 3 mts upto 6 mtrs from tapping point to outlet via switch box | Each | 1400.6 | 1400.6 | 10.0 | False | None | None | False | None | False | 14006.0 | 0 |
| 3817923 | 145156 | None | code64 | CIRCUIT MAIN / POWER MAIN / SUBMAINS : Supplying and wiring for lighting circuit mains/ power mains/submains, using one of FRLS PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed slab / groove cutting system of wiring including required bends and accessories. 2x1.5 Sqmm +1x1.0 Sqmm PVC Insulated wires drawn in 20mm dia PVC conduit for additional length of point wiring. | Mtr | 162.84 | 162.84 | 75.0 | False | None | None | False | None | False | 12213.0 | 0 |
| 3817924 | 145156 | None | code65 | 2 x 2.5 Sqmm + 1 x 1.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit for Lighting Circuit Mains | Mtr | 205.32 | 205.32 | 50.0 | False | None | None | False | None | False | 10266.0 | 0 |
| 3817925 | 145156 | None | code66 | 2 x 4 Sqmm + 1 x 2.5 Sq mm PVC Insulated wires drawn in 25 mm dia PVC conduit | Mtr | 274.94 | 274.94 | 50.0 | False | None | None | False | None | False | 13747.0 | 0 |
| 3817926 | 145156 | None | code67 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1 to 3Way | Nos | 107.38 | 107.38 | 5.0 | False | None | None | False | None | False | 536.9 | 0 |
| 3817927 | 145156 | None | code68 | 4 to 5 way | Nos | 143.95 | 143.95 | 5.0 | False | None | None | False | None | False | 719.75 | 0 |
| 3817928 | 145156 | None | code69 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. materials 1 to 3 module | Nos | 179.35 | 179.35 | 5.0 | False | None | None | False | None | False | 896.75 | 0 |
| 3817929 | 145156 | None | code70 | 4 to 5 module | Nos | 206.5 | 206.5 | 5.0 | False | None | None | False | None | False | 1032.5 | 0 |
| 3817930 | 145156 | None | code71 | Supplying and fixing of modular switch/ Socket on existing modular switch plate 6Amps one way. | Nos | 103.83 | 103.83 | 6.0 | False | None | None | False | None | False | 622.98 | 0 |
| 3817931 | 145156 | None | code72 | 16Amps one way switch | Nos | 293.82 | 293.82 | 6.0 | False | None | None | False | None | False | 1762.92 | 0 |
| 3817932 | 145156 | None | code73 | SUPPLY & INSTALLATION OF LIGHT & FAN FIXTURES:Supplying of 2 x 20W ceiling / wall / Suspendend mounted LED batten light fixture of typeREGALBATTENT 8UPTO2X22WDSBSWH + CRYSTAL 1213T8DSTL18WLED865SGLASS of Havells make/equivalent. | Nos | 737.5 | 737.5 | 8.0 | False | None | None | False | None | False | 5900.0 | 0 |
| 3817933 | 145156 | None | code74 | Supplying of 10W, LED BULK HEAD LIGHT FIXTURE of type LBLK01X010XW of Jaquar make/equivalent. The rate shall include cost of driver and all necessary accessories as required. | Nos | 1571.87 | 1571.87 | 4.0 | False | None | None | False | None | False | 6287.48 | 0 |
| 3817934 | 145156 | None | code75 | Supplying exhaust fan of 1440 RPM Heavy Duty of 450mm (15") size with bracket blades suitable to operate on 230V 50Hz, AC Supply. | Nos | 4868.67 | 4868.67 | 4.0 | False | None | None | False | None | False | 19474.68 | 0 |
| 3817935 | 145156 | None | code76 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire. | Nos | 472.0 | 472.0 | 4.0 | False | None | None | False | None | False | 1888.0 | 0 |
| 3817936 | 145156 | None | code77 | Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required nos of round blocks and clamps. On wall / ceiling / Rafter / girders | Nos | 129.79 | 129.79 | 12.0 | False | None | None | False | None | False | 1557.48 | 0 |
| 3817937 | 145156 | None | code78 | 7. EARTHING SYSTEM Supplying, fixing and wiring earth electrode for grounding of computers, Lifts, Transformers, DG sets etc., Using 40 mm dia 2.9mm thick 2.5mtrs long with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a C.C. chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covereed 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. | Each | 4897.0 | 4897.0 | 1.0 | False | None | None | False | None | False | 4897.0 | 0 |
| 3817938 | 145156 | None | code79 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip | Mtr | 88.5 | 88.5 | 20.0 | False | None | None | False | None | False | 1770.0 | 0 |
| 3817939 | 145156 | None | code80 | MISCELLANEOUS WORKS: Supply & laying of 2 mm thick, PVC conduit with all conduit accessories etc., as required. The rate shall include chasing of walls / floors and plastering the chased portion as required 20mm dia PVC Conduit | Mtr | 80.24 | 80.24 | 10.0 | False | None | None | False | None | False | 802.4 | 0 |
| 3817940 | 145156 | None | code81 | 25mm dia PVC Conduit | Mtr | 88.5 | 88.5 | 5.0 | False | None | None | False | None | False | 442.5 | 0 |
| 3817941 | 145156 | None | code82 | 32mm dia PVC Conduit | Mtr | 116.82 | 116.82 | 5.0 | False | None | None | False | None | False | 584.1 | 0 |