| 1724068252000 | 0 | None | None | Buildings | Construction of SpillOver Work of Pourakarmika Rest Room in TP Tavargera Limits(ST Category) | 1025982.47 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3813004 | 144778 | None | Code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work PWD CSR 2023 24, Vol I, P. No. 8, I. No. 1.14.1 | Cum | 107.1 | 107.1 | 37.1232 | False | None | None | False | None | False | 3975.89472 | 0 | | 3813005 | 144778 | None | Code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 136 Using 40 mm nominal size graded crushed coarse aggregates PWD CSR 2023 24, Vol I, P. No. 15, I. No. 2.1.3 | Cum | 6288.45 | 6288.45 | 2.203 | False | None | None | False | None | False | 13853.45535 | 0 | | 3813006 | 144778 | None | Code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 16 (1 cement 6 coarse sand) PWD CSR 2023 24, Vol II, P. No. 9, I. No. 5.4 | Cum | 6708.45 | 6708.45 | 4.5684 | False | None | None | False | None | False | 30646.88298 | 0 | | 3813007 | 144778 | None | Code04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. PWD CSR 2023 24, Vol I, P. No. 7, I. No. 1.9 | Cum | 279.3 | 279.3 | 6.6141 | False | None | None | False | None | False | 1847.31813 | 0 | | 3813008 | 144778 | None | Code05 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023 24, Vol I, P. No. 16, I. No. 2.4.2 | Cum | 9800.65 | 9800.65 | 6.947 | False | None | None | False | None | False | 68085.11555 | 0 | | 3813009 | 144778 | None | Code06 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023 24, Vol I, P. No. 16, I. No. 2.5.1 | Cum | 10939.5 | 10939.5 | 9.212 | False | None | None | False | None | False | 100774.674 | 0 | | 3813010 | 144778 | None | Code07 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification For Buildings PWD CSR 2023 24, Vol I, P. No. 18, I. No. 2.11a | Tonne | 93929.85 | 93929.85 | 1.7704 | False | None | None | False | None | False | 166293.40644 | 0 | | 3813011 | 144778 | None | Code08 | Providing and fixing Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer,
including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes including cost of materials, labour, usage
charges of machinery complete as per specifications and as per directions
of the Engineer in Charge. PWD CSR 2023 24, Vol II, P. No. 82, I. No. 11.16.1 | Kg | 142.8 | 142.8 | 311.64 | False | None | None | False | None | False | 44502.192 | 0 | | 3813012 | 144778 | None | Code09 | Providing & fixing corrugated G.S. sheet roofing including vertical /
curved surface fixed with polymer coated J or L hooks, bolts and nuts 8
mm diameter with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead, including a coat of approved steel primer
and two coats of approved paint on overlapping of sheets complete as
per design drawings (up to any pitch in horizontal/ vertical or curved
surfaces), excluding the cost of purlins, rafters and trusses and including
cutting to size and shape wherever required as per the direction of
Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ m PWD CSR 2023 24, Vol II, P. No. 21, I. No. 7.1.1 | Sqm | 922.95 | 922.95 | 14.0 | False | None | None | False | None | False | 12921.3 | 0 | | 3813013 | 144778 | None | Code10 | Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x150x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS
2185 (Part I) 2005 and constructed with CM 14 as per IS 25722005
including cost of all materials, labour, scaffolding and curing, usage
charges of machinery etc complete as per specifications. PWD CSR 2023 24, Vol II, P. No. 17, I. No. 6.33 | Sqm | 1292.55 | 1292.55 | 87.912 | False | None | None | False | None | False | 113630.6556 | 0 | | 3813014 | 144778 | None | Code11 | Providing Half brick masonry with common burnt clay Non Modular bricks
of class designation 3.5 in foundations and plinth in Cement mortar 14 (1
cement 4 coarse sand) including cost of all materials, labour, scaffolding
and usage charges of machinery & other incidental charges complete as
per the direction of engineer incharge of work. PWD CSR 2023 24, Vol II, P. No. 14, I. No. 6.13 | Sqm | 1024.8 | 1024.8 | 27.8 | False | None | None | False | None | False | 28489.44 | 0 | | 3813015 | 144778 | None | Code12 | Providing 12 mm cement plaster with cement mortar 16 (1 cement
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of materials,
labour, curing complete as per specifications and as per directions of
Engineer in charge.PWD CSR 2023 24, Vol II, P. No. 41, I. No. 8.1.2 | Sqm | 253.05 | 253.05 | 126.59 | False | None | None | False | None | False | 32033.5995 | 0 | | 3813016 | 144778 | None | Code13 | Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 14 (1 cement 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications
and as per directions of Engineer in charge. PWD CSR 2023 24, Vol II, P. No. 41, I. No. 8.2.1 | Sqm | 309.75 | 309.75 | 115.36 | False | None | None | False | None | False | 35732.76 | 0 | | 3813017 | 144778 | None | Code14 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls @ 1.25 L/10 m over and including one coat of Special primer applied @ 0.75 L/10 m with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. (The gloss should be 50Percent @ 60 degree angle with 10 years life) PWD CSR 2023 24, Vol II, P. No. 46, I. No. 8.33.1 | Sqm | 165.9 | 165.9 | 241.95 | False | None | None | False | None | False | 40139.505 | 0 | | 3813018 | 144778 | None | Code15 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 13 (1 cement 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. PWD CSR 2023 24, Vol II, P. No. 60, I. No. 9.10 | Sqm | 1161.3 | 1161.3 | 62.445 | False | None | None | False | None | False | 72517.3785 | 0 | | 3813019 | 144778 | None | Code16 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 13 (1 cement 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete.PWD CSR 2023 24, Vol II, P. No. 71, I. No. 10.14 | Sqm | 1161.3 | 1161.3 | 23.4 | False | None | None | False | None | False | 27174.42 | 0 | | 3813020 | 144778 | None | Code17 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. PWD CSR 2023 24, Vol II, P. No. 86, I. No. 11.34B | Kg | 192.15 | 192.15 | 151.2 | False | None | None | False | None | False | 29053.08 | 0 | | 3813021 | 144778 | None | Code18 | Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket
etc. complete as per the architectural drawings and the directions of
engineer in charge . (Cost of aluminium snap beading shall be paid in
basic item)With float glass panes of 5 mm thickness (weight not less
than 12.50 kg/m2) including cost of materials, labour, usage charges of
machinery complete as per specifications. | Mtr | 1229.55 | 1229.55 | 4.32 | False | None | None | False | None | False | 5311.656 | 0 | | 3813022 | 144778 | None | Code19 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( 0.1 mm) wall thickness and 3 nos.
stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer in charge 42x50 mm PVC Extruded section PWD CSR 2023 24, Vol II, P. No. 108, I. No. 12.83.2 | Mtr | 250.95 | 250.95 | 23.4 | False | None | None | False | None | False | 5872.23 | 0 | | 3813023 | 144778 | None | Code20 | Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm 2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) PWD CSR 2023 24, Vol II, P. No. 111, I. No. 12.92 | Sqm | 6557.25 | 6557.25 | 9.0 | False | None | None | False | None | False | 59015.25 | 0 | | 3813024 | 144778 | None | Code21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00
m spacing. This includes jointing of pipes & fittings with one step CPVC
solvent cement and the cost of cutting chases and making good the
same including testing of joints complete as per direction of Engineer in
Charge. Concealed work, including cutting chases and making good the
walls etc. 20 mm nominal dia Pipes PWD CSR 2023 24, Vol II, P. No. 122, I. No. 13.32.2 | Mtr | 397.95 | 397.95 | 40.0 | False | None | None | False | None | False | 15918.0 | 0 | | 3813025 | 144778 | None | Code22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. PWD CSR 2023 24, Vol II, P. No. 123, I. No. 13.34 | Nos | 9.45 | 9.45 | 3000.0 | False | None | None | False | None | False | 28350.0 | 0 | | 3813026 | 144778 | None | Code23 | Providing PVC ringtite pipes conforming to IS 49852000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations
and cuts of pipes wherever necessary including jointing of PVC pipes
and specials (excluding cost of specials) with jointing of approved
type, with all labour with all lead & lift including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc. complete For
PVC pipes 110mm dia., 6 kg/sqcm & class 3 | Mtr | 431.55 | 431.55 | 25.0 | False | None | None | False | None | False | 10788.75 | 0 | | 3813027 | 144778 | None | Code24 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete PWD CSR 2023 24, Vol II, P. No. 127, I. No. 13.59 | Each | 231.0 | 231.0 | 4.0 | False | None | None | False | None | False | 924.0 | 0 | | 3813028 | 144778 | None | Code25 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer in charge Orissa pattern W.C Pan of size 580x440 mm (PWD CSR 2023 24, Vol II, P. No. 202, I. No. 20.44.2) | Each | 3724.35 | 3724.35 | 2.0 | False | None | None | False | None | False | 7448.7 | 0 | | 3813029 | 144778 | None | Code26 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid PWD CSR 2023 24, Vol II, P. No. 131, I. No. 14.3.1 | Each | 6275.85 | 6275.85 | 2.0 | False | None | None | False | None | False | 12551.7 | 0 | | 3813030 | 144778 | None | Code27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps PWD CSR 2023 24, Vol II, P. No. 132, I. No. 14.7.1 | Each | 3236.1 | 3236.1 | 2.0 | False | None | None | False | None | False | 6472.2 | 0 | | 3813031 | 144778 | None | Code28 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm (PWD CSR 2023 24, Vol II, P. No. 136, I. No. 14.32.4) | Each | 1812.3 | 1812.3 | 2.0 | False | None | None | False | None | False | 3624.6 | 0 | | 3813032 | 144778 | None | Code29 | Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Class a Economy PWD CSR 2023 24, Vol II, P. No. 144, I. No. 14.85a | Each | 1833.3 | 1833.3 | 2.0 | False | None | None | False | None | False | 3666.6 | 0 | | 3813033 | 144778 | None | Code30 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick (P.no.2.it.no.1.1.1) (PWD CSR for Electrical Works for the Year 2023 24) | Each | 72.45 | 72.45 | 30.0 | False | None | None | False | None | False | 2173.5 | 0 | | 3813034 | 144778 | None | Code31 | PVC/metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box (P.no.2.it.no.1.5) (PWD CSR for Electrical Works for the Year 2023 24) | Each | 51.45 | 51.45 | 2.0 | False | None | None | False | None | False | 102.9 | 0 | | 3813035 | 144778 | None | Code32 | Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 8 x 6 x 3 (203 x 152 x 76 mm) (P.no.3.it.no.1.6.4) (PWD CSR for Electrical Works for the Year 2023 24) | Each | 90.3 | 90.3 | 2.0 | False | None | None | False | None | False | 180.6 | 0 | | 3813036 | 144778 | None | Code33 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694confirming to latest amendments.4 Sqmm (P.no.5.it.no.2.3.4) (PWD CSR for Electrical Works for the Year 2023 24) | Mtr | 66.15 | 66.15 | 46.0 | False | None | None | False | None | False | 3042.9 | 0 | | 3813037 | 144778 | None | Code34 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps two way. (P.no.9.it.no.3.6.2) (PWD CSR for Electrical Works for the Year 2023 24) | Each | 174.3 | 174.3 | 6.0 | False | None | None | False | None | False | 1045.8 | 0 | | 3813038 | 144778 | None | Code35 | 4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. (P.no.9.it.no.3.8) (PWD CSR for Electrical Works for the Year 2023 24) | Sqm | 0.43 | 0.43 | 1000.0 | False | None | None | False | None | False | 430.0 | 0 | | 3813039 | 144778 | None | Code36 | Porcelain Fuse Channel Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps (P.no.10.it.no.5.7.2) (PWD CSR for Electrical Works for the Year 2023 24) | Each | 253.05 | 253.05 | 2.0 | False | None | None | False | None | False | 506.1 | 0 | | 3813040 | 144778 | None | Code37 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6 32 Amps DP .(p.no.17.it.no.5.18.4) (PWD CSR for Electrical Works for the Year 2023 24) | Each | 775.95 | 775.95 | 1.0 | False | None | None | False | None | False | 775.95 | 0 | | 3813041 | 144778 | None | Code38 | PVC Batten with LED Tubes Supplying of ......feet PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70Percent lumen maintenance with CRI 80. Power Input 220 240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4 20/22 w (p.no.43.it.no.11.3.2) (PWD CSR for Electrical Works for the Year 2023 24) | Each | 724.5 | 724.5 | 8.0 | False | None | None | False | None | False | 5796.0 | 0 | | 3813042 | 144778 | None | Code39 | Lamp Holder Supplying & Fixing of 70 150 Watts lamp holder 2 Pin (p.no.52.it.no.12.46) (PWD CSR for Electrical Works for the Year 2023 24) | Nos | 66.15 | 66.15 | 8.0 | False | None | None | False | None | False | 529.2 | 0 | | 3813043 | 144778 | None | Code40 | Fixing all type of Luminaries Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders (p.no.56.it.no.13.7.1) (PWD CSR for Electrical Works for the Year 2023 24) | Each | 128.1 | 128.1 | 8.0 | False | None | None | False | None | False | 1024.8 | 0 | | 3813044 | 144778 | None | Code41 | Supplying,fixingandwiringElectronicTrivectorMeter(ETV)5to32/63Athreephase4wirewholecurrentclass 1AccuracyEnergyMeter. (PWD CSR for Electrical Works for the Year 2023 24 P.no.30.it.no.5.35) | Each | 5990.25 | 5990.25 | 1.0 | False | None | None | False | None | False | 5990.25 | 0 | | 3813045 | 144778 | None | Code42 | Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipmentsonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsaltandcharcoal150mmall roundthepipetocompletedepth.Theconnectionfromthepipetotheconduitetc.,istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia . (PWD CSR for Electrical Works for the Year 2023 24 P.no.54.it.no.12.56) | Each | 3685.5 | 3685.5 | 1.0 | False | None | None | False | None | False | 3685.5 | 0 | | 3813046 | 144778 | None | Code43 | Constructing masonry Chamber 30x30x50 cm inside, in brick
work in cement mortar 14 (1 cement 4 coarse sand) with C.
I. surface box 100x100 x75 mm (inside) with hinged cover fixed in
cement concrete slab 124 mix (1 cement 2 coarse sand 4 graded
stone aggregate 20 mm nominal size), i/c necessary excavation,
foundation concrete 1510 ( 1 cement 5 fine sand 10 graded stone
aggregate 40mm nominal size ) and inside plastering with cement
mortar 13 (1 cement 3 coarse sand) 12mm thick, finished with
a floating coat of neat cement complete as per standard design
With common burnt clay (non modular) bricks of class designation 3.5. (PWD CSR 2023 24 P.no.125.it.no.13.51) | Each | 1791.3 | 1791.3 | 2.0 | False | None | None | False | None | False | 3582.6 | 0 | | 3813047 | 144778 | None | Code44 | Providing PVC ringtite pipes conforming to IS 49852000 with latest
amendments and conveying to worksite, rolling and lowering into
trenches, laying true to line and level and perfect linking at joints, testing
and commissioning, including loading unloading at both destinations
and cuts of pipes wherever necessary including jointing of PVC pipes
and specials (excluding cost of specials) with jointing of approved
type, with all labour with all lead & lift including encasing the pipe
alround to a depth of not less than 15 cms. with soft gravel or selected
earth available from the excavation etc. complete and giving necessary
hydraulic test to the required pressure as per ISS (Contractor will make
his own arrangements for procuring water for testing) etc. complete For PVC pipes 25mm dia, 10 kg/sqcm & class 5 PWD SR 2023 24 Vol5 P.NO.113 I.No10.1.1 | Mtr | 50.4 | 50.4 | 59.0 | False | None | None | False | None | False | 2973.6 | 0 | | 3813048 | 144778 | None | Code45 | Stepped Fan Regulator Two Module | Each | 357.0 | 357.0 | 8.0 | False | None | None | False | None | False | 2856.0 | 0 | | 3813049 | 144778 | None | Code46 | Supplying & Fixing of Fan | Each | 1209.0 | 1209.0 | 8.0 | False | None | None | False | None | False | 9672.0 | 0 |
|