| 1724302632000 | 0 | None | None | Other Works | Construction of Compound wall Near Dayvamma Temple CMC Public Place in ward No. 03 and Construction Passenger Bus Stand at Kusatgi Main Road Near CMC OHT Tank in Ward No. 14 and Construction of Welcome Board in Ward No. 21 and 25 Sindhanr Municipal Limit. | 1009192.66 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3832079 | 146072 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work | Cum | 107.1 | 107.1 | 22.88 | False | None | None | False | None | False | 2450.448 | 0 | | 3832080 | 146072 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 3.67 | False | None | None | False | None | False | 23078.6115 | 0 | | 3832081 | 146072 | None | code03 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1292.55 | 1292.55 | 182.88 | False | None | None | False | None | False | 236381.544 | 0 | | 3832082 | 146072 | None | code04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 25.42 | False | None | None | False | None | False | 7099.806 | 0 | | 3832083 | 146072 | None | code05 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9800.65 | 9800.65 | 9.31 | False | None | None | False | None | False | 91244.0515 | 0 | | 3832084 | 146072 | None | code06 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - For Buildings | Tonne | 93929.85 | 93929.85 | 0.7863 | False | None | None | False | None | False | 73857.041055 | 0 | | 3832085 | 146072 | None | code07 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 253.05 | 253.05 | 410.6 | False | None | None | False | None | False | 103902.33 | 0 | | 3832086 | 146072 | None | code08 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) | Sqm | 165.9 | 165.9 | 83.0 | False | None | None | False | None | False | 13769.7 | 0 | | 3832087 | 146072 | None | code09 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm | Sqm | 1202.25 | 1202.25 | 16.0 | False | None | None | False | None | False | 19236.0 | 0 | | 3832088 | 146072 | None | code10 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications | Kgs | 593.25 | 593.25 | 11.37 | False | None | None | False | None | False | 6745.2525 | 0 | | 3832089 | 146072 | None | code11 | Supply of LED Street light luminaries with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection molded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500 K, IP66 optical and electrical compartment & impact resistance of complete luminaries IK08. Power Factor 0.9 with mains, Surge Protection-Min 5KV along with Over voltage/ Overload, shortcircuit / miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver too pirate wide voltage range from 100V to 270 V 50/60 Hz application. Compliance to IS10322/ IEC60598, LM79 & LM 80 Adherence with Ro HS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with........W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaries manufacturer should havein-house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier word mark /names hallbe Engraved /Embossing on the die cast housing /Body part. Warranty of 2Years against any manufacturing defect working under stand and electrical conditions as mentioned above should be given by LED manufacturer & Cree /Nichia/Lumileds/Osram make LED Source. LED Streetlight 70W | Each | 6291.6 | 6291.6 | 7.0 | False | None | None | False | None | False | 44041.2 | 0 | | 3832090 | 146072 | None | code12 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2 | Mtr | 44.1 | 44.1 | 95.0 | False | None | None | False | None | False | 4189.5 | 0 | | 3832091 | 146072 | None | code13 | Supplying and Fixing of 25mm dia class A GI pipe bracket upto 1 ms long bent at suitable angle and fixing to this bracket street ligh tfitting of all capacities to GI or GIorrailor RCC pole/wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe | Each | 500.0 | 500.0 | 6.0 | False | None | None | False | None | False | 3000.0 | 0 | | 3832092 | 146072 | None | code14 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch | Each | 107.1 | 107.1 | 4.0 | False | None | None | False | None | False | 428.4 | 0 | | 3832093 | 146072 | None | code15 | Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 113.4 | 113.4 | 327.6 | False | None | None | False | None | False | 37149.84 | 0 | | 3832094 | 146072 | None | code16 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions
of the Engineer-in-Charge. | Kgs | 142.8 | 142.8 | 883.52 | False | None | None | False | None | False | 126166.656 | 0 | | 3832095 | 146072 | None | code17 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. | Cum | 254.1 | 254.1 | 8.1 | False | None | None | False | None | False | 2058.21 | 0 | | 3832096 | 146072 | None | code18 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6639.15 | 6639.15 | 1.08 | False | None | None | False | None | False | 7170.282 | 0 | | 3832097 | 146072 | None | code19 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 145.95 | 145.95 | 58.3 | False | None | None | False | None | False | 8508.885 | 0 | | 3832098 | 146072 | None | code20 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5947.2 | 5947.2 | 0.3 | False | None | None | False | None | False | 1784.16 | 0 | | 3832099 | 146072 | None | code21 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6961.5 | 6961.5 | 0.94 | False | None | None | False | None | False | 6543.81 | 0 | | 3832100 | 146072 | None | code22 | Form Work
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. | Sqm | 348.08 | 348.08 | 0.94 | False | None | None | False | None | False | 327.1952 | 0 | | 3832101 | 146072 | None | code23 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage
charges of machinery complete as per specifications and as per directions
of the Engineer-in-Charge. | Kgs | 154.35 | 154.35 | 1101.78 | False | None | None | False | None | False | 170059.743 | 0 | | 3832102 | 146072 | None | code24 | Supply and Fixing of Radium Stickar Work | Lot | 10000.0 | 10000.0 | 2.0 | False | None | None | False | None | False | 20000.0 | 0 |
|