createdTsNone
versionNone
createdDateNone
modifiedDateNone
noticeInvitingTenderDTO
createdTs1724162140621
version3
createdDateNone
modifiedDateNone
tenderTypeRFQ
evaluationTypeONE_COVER
evaluationTypeTextOne Cover
invitingStrategyOPEN
invitingStrategyTextOpen
taxTypeINCLUSIVE_TAX
tenderFee1070.00
emd85000.00
bidValueTypeITEM_WISE
bidValueTypeTextItem wise
tenderReceiptClose29-08-2024 16:00:00
tenderQueryClose28-08-2024 17:30:00
technicalBidOpenNone
publishedDate21-08-2024 20:12:16
publishedByPostPWD_EE_DIV_KLB
publishedByUserKPE14204 - SUBHASH L SHIXNAKAR
bidValidityPeriod90
noOfCalls1
preBidMeetingDateNone
preBidMeetingYnFalse
preQualificationBidOpenNone
denominationTypeRUPEES
denominationTypeTextRupees
retenderedYnNone
percentageRateTypeTextNone
contactPersonSubhash L Shixnakar
splitEmdRequiredYnFalse
emdBankGuaranteeNone
emdCashNone
bgValidityPeriodNone
hideWeightageNone
multipleCurrencySelectionAllowedYnFalse
isTechWeightageAllowedFalse
highestBidderSelectionFalse
isVariableEmdAllowedNone
qcbsTenderYnNone
itemwiseEmdRequiredYnNone
sampleSubmissionDateNone
officeNumber08472224455
mobileNumber9448652632
tenderSupplierListNone
tenderSchedule
createdTs1724162140663
version4
createdDateNone
modifiedDateNone
tenderNumberPWD/2024-25/BD/WORK_INDENT14859
titleCONSTRUCTION OF NEW CLASS ROOMS TO GOVERNMENT LOWER PRIMARY SCHOOL (ELECTRIFICATION, TUBE LIGHT, BULB, FAN) ELECTRICAL CONNECTIVITY DRINKING WATER FACILITY, SPORTS EQUIPMENTS, GREEN AND SOFT BOARDS, TOILET FACILITY AT SANGOLOLI (G) VILLAGE IN ALAND TALUKA.UNDER KKRDB FOR THE YEAR.2023-24
descriptionCONSTRUCTION OF NEW CLASS ROOMS TO GOVERNMENT LOWER PRIMARY SCHOOL (ELECTRIFICATION, TUBE LIGHT, BULB, FAN) ELECTRICAL CONNECTIVITY DRINKING WATER FACILITY, SPORTS EQUIPMENTS, GREEN AND SOFT BOARDS, TOILET FACILITY AT SANGOLOLI (G) VILLAGE IN ALAND TALUKA.UNDER KKRDB FOR THE YEAR.2023-24
categoryWORKS
categoryTextWorks
ecv4247097.58
deptNamePublic Works Department
statusPUBLISHED
statusTextPublished
remarksNone
csrValueNone
ecvtenderYnTrue
location1689
locationNamePWD Division Office Kalaburagi
provisionalAmount5000000.0
groupOverheadTotalNone
fileNumber2024-25-EST-ALAND-SG-29
tenderSubEstimateList
createdTsversioncreatedDatemodifiedDateworkCategoryNamesubEstimateNameestimateTotalitemList
17241621410000NoneNoneBuildingsCivil Work3720722.19
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3822667145471NonePWD DSR 2023-24 V-1 IT.NO 1.14.1Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Cum107.1107.1121.25FalseNoneNoneFalseNoneFalse12985.8750
3822668145471NonePWD DSR 2023-24 V-1 IT.NO 2.1.2Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum5947.25947.216.09FalseNoneNoneFalseNoneFalse95690.4480
3822669145471NonePWD DSR 2023-24 V-1 IT.NO 2.5.1Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum6961.56961.571.51FalseNoneNoneFalseNoneFalse497816.8650
3822670145471NonePWD DSR 2023-24 V-1 IT.NO 2.5.1Centering & shuttering charges Cum208.85208.8513.61FalseNoneNoneFalseNoneFalse2842.44850
3822671145471NonePWD DSR 2023-24 V-1 IT.NO 2.5.1Centering & shuttering charges Cum4873.054873.058.19FalseNoneNoneFalseNoneFalse39910.27950
3822672145471NonePWD DSR 2023-24 V-1 IT.NO 2.5.1Centering & shuttering charges Cum3480.753480.757.11FalseNoneNoneFalseNoneFalse24748.13250
3822673145471NonePWD DSR 2023-24 V-1 IT.NO 2.5.1Centering & shuttering charges Cum4176.94176.915.56FalseNoneNoneFalseNoneFalse64992.5640
3822674145471NonePWD DSR 2023-24 V-1 IT.NO 2.5.1Centering & shuttering charges Cum2784.62784.60.41FalseNoneNoneFalseNoneFalse1141.6860
3822675145471NonePWD DSR 2023-24 V-1 IT.NO 2.5.1Centering & shuttering charges Cum3480.753480.7526.63FalseNoneNoneFalseNoneFalse92692.37250
3822676145471NonePWD DSR 2023-24 IT.NO 5.1.1Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum5891.555891.5546.17FalseNoneNoneFalseNoneFalse272012.86350
3822677145471NonePWD DSR 2023-24 IT.NO 5.4Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum6708.456708.4529.89FalseNoneNoneFalseNoneFalse200515.57050
3822678145471NonePWD DSR 2023-24 IT.NO 2.11Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. MT93929.8593929.857.15FalseNoneNoneFalseNoneFalse671598.42750
3822679145471NonePWD DSR 2023-24 IT.NO 1.8Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum497.7497.7147.81FalseNoneNoneFalseNoneFalse73565.0370
3822680145471NonePWD DSR 2023-24 IT.NO 6.7Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum8621.558621.5546.23FalseNoneNoneFalseNoneFalse398574.25650
3822681145471NonePWD DSR 2023-24 IT.NO 12.12Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum130412.1130412.10.79FalseNoneNoneFalseNoneFalse103025.5590
3822682145471NonePWD DSR 2023-24 IT.NO 11.34AProviding and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kgs176.4176.4272.16FalseNoneNoneFalseNoneFalse48009.0240
3822683145471NonePWD DSR 2023-24 IT.NO 8.34.3Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm52.552.529.16FalseNoneNoneFalseNoneFalse1530.90
3822684145471NonePWD DSR 2023-24 IT.NO 8.40Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm120.75120.7529.16FalseNoneNoneFalseNoneFalse3521.070
3822685145471NonePWD DSR 2023-24 IT.NO 12.51Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos1066.81066.83.0FalseNoneNoneFalseNoneFalse3200.40
3822686145471NonePWD DSR 2023-24 IT.NO 11.28Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer- in-Charge. Kgs593.25593.2563.0FalseNoneNoneFalseNoneFalse37374.750
3822687145471NonePWD DSR 2023-24 IT.NO 12.52Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos811.65811.659.0FalseNoneNoneFalseNoneFalse7304.850
3822688145471NonePWD DSR 2023-24 IT.NO 8.10Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm221.55221.55203.81FalseNoneNoneFalseNoneFalse45154.10550
3822689145471NonePWD DSR 2023-24 IT.NO 8.9Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm404.25404.25597.2FalseNoneNoneFalseNoneFalse241418.10
3822690145471NonePWD DSR 2023-24 IT.NO 2.1.4Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum6527.856527.8527.45FalseNoneNoneFalseNoneFalse179189.48250
3822691145471NonePWD DSR 2023-24 IT.NO 9.17.2Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. Sqm1233.751233.75210.56FalseNoneNoneFalseNoneFalse259778.40
3822692145471NonePWD DSR 2023-24 IT.NO 12.21Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm6029.16029.17.56FalseNoneNoneFalseNoneFalse45579.9960
3822693145471NonePWD DSR 2023-24 IT.NO 12.32Providing and fixing in position Mathi / Nandi wood fully panelled shutters for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, usage charges complete as per specifications.(excluding cost of fixtures). Sqm6134.16134.112.96FalseNoneNoneFalseNoneFalse79497.9360
3822694145471NonePWD DSR 2023-24 IT.NO 12.58Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos126.0126.03.0FalseNoneNoneFalseNoneFalse378.00
3822695145471NonePWD DSR 2023-24 IT.NO 12.62Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Nos248.85248.8533.0FalseNoneNoneFalseNoneFalse8212.050
3822696145471NonePWD DSR 2023-24 IT.NO 12.63Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos136.5136.560.0FalseNoneNoneFalseNoneFalse8190.00
3822697145471NonePWD DSR 2023-24 IT.NO 12.71.1Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Nos312.9312.963.0FalseNoneNoneFalseNoneFalse19712.70
3822698145471NonePWD DSR 2023-24 IT.NO 8.51Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm105.0105.0485.69FalseNoneNoneFalseNoneFalse50997.450
3822699145471NonePWD DSR 2023-24 IT.NO 8.25Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm143.85143.85598.58FalseNoneNoneFalseNoneFalse86105.7330
3822700145471NonePWD DSR 2023-24 IT.NO 8.28Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm93.4593.45202.43FalseNoneNoneFalseNoneFalse18917.08350
3822701145471NonePWD DSR 2023-24 IT.NO 8.34.1Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm55.6555.6546.17FalseNoneNoneFalseNoneFalse2569.36050
3822702145471NonePWD DSR 2023-24 IT.NO 8.33.2Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm144.9144.946.17FalseNoneNoneFalseNoneFalse6690.0330
3822703145471NonePWD DSR 2023-24 IT.NO 8.84Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. Sqm498.75498.758.64FalseNoneNoneFalseNoneFalse4309.20
3822704145471NonePWD DSR 2023-24 IT.NO 16.31Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded/bolted with MS Square angle 25mm x25mmx 5mm size on back and on the edges. The Top and Bottom plate will be welded/ bolted to 1 nos75x75x6 mm square Hallow section duly embedded in cement concrete M15 Grade of 600*600*600 mm, 450 mm below ground level.Retro-Reflecting Sheet as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting.All sections of steel tube will be painted with primer and two coats of epoxy paint as per drawing. Sqm10156.6510156.651.08FalseNoneNoneFalseNoneFalse10969.1820
17241621410000NoneNoneBuildingsElectrification Work151820.0
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3822705145472NoneElectrical DSR It.no 1.2.1Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and runningbefore concreting the slab. The conduit should be tied to thereinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered usingPVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick Mtr66.066.0220.0FalseNoneNoneFalseNoneFalse14520.00
3822706145472NoneElectrical DSR It.no 1.3.2Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick Mtr79.079.0220.0FalseNoneNoneFalseNoneFalse17380.00
3822707145472NoneElectrical DSR It.no 1.5.2Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box Mtr49.049.020.0FalseNoneNoneFalseNoneFalse980.00
3822708145472NoneElectrical DSR It.no 1.6.3Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete 10"x7"x3" (254x178x76mm) Each112.0112.08.0FalseNoneNoneFalseNoneFalse896.00
3822709145472NoneElectrical DSR It.no 1.12Supplying And Fixing Metal Fan Box with Round Hook. Nos160.0160.08.0FalseNoneNoneFalseNoneFalse1280.00
3822710145472NoneElectrical DSR It.no 2.1.1Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch Point285.0285.08.0FalseNoneNoneFalseNoneFalse2280.00
3822711145472NoneElectrical DSR It.no 2.1.2Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point394.0394.08.0FalseNoneNoneFalseNoneFalse3152.00
3822712145472NoneElectrical DSR It.no 2.1.3Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point570.0570.08.0FalseNoneNoneFalseNoneFalse4560.00
3822713145472NoneElectrical DSR It.no 2.5.2Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 3C X 1.5Sq.mm Mtr72.072.0250.0FalseNoneNoneFalseNoneFalse18000.00
3822714145472NoneElectrical DSR It.no 2.5.3Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 4C X 1.5Sq.mm Mtr94.094.0250.0FalseNoneNoneFalseNoneFalse23500.00
3822715145472NoneElectrical DSR It.no 3.1.1Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 6Amps 2 Way Each128.0128.08.0FalseNoneNoneFalseNoneFalse1024.00
3822716145472NoneElectrical DSR It.no 3.14.2Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6Amps 2way Switch Nos70.070.08.0FalseNoneNoneFalseNoneFalse560.00
3822717145472NoneElectrical DSR It.no 3.5.1Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module Each137.0137.040.0FalseNoneNoneFalseNoneFalse5480.00
3822718145472NoneElectrical DSR It.no 3.5.3Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.6 Module Each175.0175.040.0FalseNoneNoneFalseNoneFalse7000.00
3822719145472NoneElectrical DSR It.no 3.8Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. Sq CM0.410.4140000.0FalseNoneNoneFalseNoneFalse16400.00
3822720145472NoneElectrical DSR It.no 6.3.2Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. Each3031.03031.08.0FalseNoneNoneFalseNoneFalse24248.00
3822721145472NoneElectrical DSR It.no 13.7.1Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps. Each122.0122.016.0FalseNoneNoneFalseNoneFalse1952.00
3822722145472NoneElectrical DSR It.no 13.11Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.Each315.0315.08.0FalseNoneNoneFalseNoneFalse2520.00
3822723145472NoneElectrical DSR It.no 5.18.8Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure. Each3044.03044.02.0FalseNoneNoneFalseNoneFalse6088.00
17241621410000NoneNoneBuildingsGEM Portal374555.39
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
3822724145473None2024-25WATER PURIFICATION New Universal RO Portable Water Purification System with inbuilt Water cooler.RO+UV New Universal RO Each85900.085900.01.0FalseNoneNoneFalseNoneFalse85900.00
3822725145473None2024-25COMPUTER acer Intel Core i7 11700 16GB/1000 GB HDD/ Windows 10 Professional acerr (Veriton M200-H510). Each40000.040000.03.0FalseNoneNoneFalseNoneFalse120000.00
3822726145473None2024-25PRINTERS hp Laser Mono Computer Printers for A4 paper size hpR (HP Laser 108w Printer with 1 year Warranty). Each11858.6411858.641.0FalseNoneNoneFalseNoneFalse11858.640
3822727145473None2024-25COMUTER TABLE NA Computer Table consists of Computer table with key board drawer and table top nar (KS-08). Each8300.928300.923.0FalseNoneNoneFalseNoneFalse24902.760
3822728145473None2024-25REVOLVING CHAIR "FLOYD Revolving Chair with Knee tilt Synchronic mechanism FLOYDR (KDC-011)." Each2640.02640.03.0FalseNoneNoneFalseNoneFalse7920.00
3822729145473None2024-25WHITE BOARD Himachal Wood Crafts Writing Board (white Board 6 x 4) Each7250.07250.08.0FalseNoneNoneFalseNoneFalse58000.00
3822730145473None2024-25BULLET CAMERA ewit - 5 MP Bullet Camera Each3999.03999.04.0FalseNoneNoneFalseNoneFalse15996.00
3822731145473None2024-25MONITOR ewit 53.5 - 55.5 CM Liquid Crystal Display LCD Panel or Monitors ewitR (EW-K53D21HD). Each6197.996197.991.0FalseNoneNoneFalseNoneFalse6197.990
3822732145473None2024-25DVR HI FOCUS 4 Channels DVR with Full HD (1920 x 1080) HI FOCUSR (HD-XVR-4104T). Each6100.06100.01.0FalseNoneNoneFalseNoneFalse6100.00
3822733145473None2024-25CCTV CABLE HiView Control cable for PTZ Camera for CCTV HiViewR (Hiview 3+1 Cable). Mtr24.524.570.0FalseNoneNoneFalseNoneFalse1715.00
3822734145473None2024-25HARD DISK DRIVE SEAGATE 2000 GB SATA HD Hard disk drive SEAGATER (ST2000VN004). Each6500.06500.01.0FalseNoneNoneFalseNoneFalse6500.00
3822735145473None2024-25SMPS "meanwell Switch Mode Power Supply (SMPS) +12 V / 2-8A meanwellR (LRS-150F-15RS)." Each965.0965.01.0FalseNoneNoneFalseNoneFalse965.00
3822736145473None2024-25INVERTER & BATTERY LUMINOUS Rating 1.5 KVA Yes (suitable battery bank provided) 2 LUMINOUSR (Eco Volt Neo 1650 1500VA/24V WITH BATTERY). Each28500.028500.01.0FalseNoneNoneFalseNoneFalse28500.00
generalCriterionList
createdTsversioncreatedDatemodifiedDatecriterionTypedescriptiontenderEligibilityCriterionDocumentList
17241621430000NoneNoneELIGIBILITYTenders from Joint ventures are not acceptable.None
17241621430001NoneNoneELIGIBILITYBidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.None
17241621430001NoneNoneELIGIBILITYIt shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of kppp portal on or before the last date and time of bid submission.None
17241621430000NoneNoneELIGIBILITYIt shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.None
17241621430000NoneNoneELIGIBILITYEMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.None
17241621430001NoneNoneELIGIBILITYBidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.None
17241621430001NoneNoneELIGIBILITYAs per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.None
17241621430001NoneNoneELIGIBILITYThe Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.None
17241621430001NoneNoneELIGIBILITYConditional tenders will not be accepted.None
17241621430001NoneNoneELIGIBILITYThe Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification.None
17241621430001NoneNoneELIGIBILITYFinancial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year(both days inclusive).None
17241621430001NoneNoneELIGIBILITYFinancial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year(both days inclusive).None
17241621430001NoneNoneELIGIBILITYThe tenderer shall note that the scanned Documents can also be uploaded in the tasks created under Document/Evidence Required from the BidderNone
17241621430001NoneNoneELIGIBILITYThe Employer reserves the right to Reject any or all Tenders without assigning any reason.None
17241621430001NoneNoneELIGIBILITYThe defect liability period for this work is 365 daysNone
17241621430001NoneNoneELIGIBILITYThe Department is not responsible for any delay in accessing kppp portal.None
17241621430001NoneNoneELIGIBILITYThe rates of all the items appeared in Bill of Quantities are inclusive of all leads and liftsNone
17241642750000NoneNoneELIGIBILITYThe contractor shall bound to comply the prevailing rules and regulations with regard to the EPF rules and any modifications before and after execution of agreementNone
17241642840000NoneNoneELIGIBILITYAfter the award of the contract, the contractor has to furnish the details in respect of labour employed and the EPF details for this work in every RA bill.None
17241642940000NoneNoneELIGIBILITYBidders are advised to note that , 18% GST will be added to the contract amount.None
17241643050001NoneNoneELIGIBILITYFinancial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the 2024-25 in the Technical Qualification Criteria mentioned in the next section.None
17241643380000NoneNoneELIGIBILITYThe Increse in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.None
17241643530000NoneNoneELIGIBILITYIn case, contractor has quoted less rates, the difference amount DD/FDRs should be submitted at the time of agreement. DD/FDRs obtained from Nationalized or Scheduled Bank in the name of Executive Engineer, PWD Division Kalaburagi. If not submitted such tenders are rejected.None
17241643650000NoneNoneELIGIBILITYThe bidder should mention the UDIN No on the turnover certificate, failing which bid is rejected.None
17241643780000NoneNoneELIGIBILITYIf the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause.None
17241643890000NoneNoneELIGIBILITYThe work should be completed in 06 (Six) Months ( including monsoon)None
17241644210000NoneNoneELIGIBILITYTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20, 2020-21, 2021-22, 2022-23&2023-24 (a) achieved in at least two financial years an average financial turn over (in all cases of civil engineering construction works only) Rs. 42.47 LakhsNone
17241644480000NoneNoneELIGIBILITYTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. , 2019-20, 2020-21, 2021-22 ,2022-23 &,2023-24 satisfactorily completed as prime contractor, at least single similar Nature of work of value not less than Rs. 21.25 LakhsNone
preQualCriterionListNone
technicalCriterionListNone
tenderCriterionDocumentList
documentNameoptionaldocumentTypeText
Annual Turnover Certificate With UDINTrueTechnical Bid
PWD Contractor Registration CertificateTrueTechnical Bid
Upload Nationalised Bank Defrence DDTrueTechnical Bid
Single Similer Nature of Work done 50PercentTrueTechnical Bid
tenderWorkLocationList
tenderAddressNone
tenderRecallDTONone