| 3816420 | 145018 | None | PC-01 | Supplying Installation commissioning and successful trail run of 16Cum Portable Compactor with tipcart mechanism | Each | 3068000.0 | 3068000.0 | 4.0 | False | None | None | False | None | False | 12272000.0 | 0 |
| 3816421 | 145018 | None | HL-01 | Truck Mounted Hook Loader (Prime Mover) on 28T GVW truck Chasis to carry fully loaded 16Cum Portable Compactor Including transporation comprehensive Insurance registration as per prevailing norms | Each | 7434000.0 | 7434000.0 | 2.0 | False | None | None | False | None | False | 14868000.0 | 0 |
| 3816422 | 145018 | None | COMMON SR 2023-24, Vol (I) P No 5 INo 1.1 | Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work | Sqm | 95.55 | 95.55 | 108.0 | False | None | None | False | None | False | 10319.4 | 0 |
| 3816423 | 145018 | None | COMMON SR 2023-24, Vol (I) INo 1.4.1) | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work | Cum | 254.1 | 254.1 | 61.5 | False | None | None | False | None | False | 15627.15 | 0 |
| 3816424 | 145018 | None | COMMON SR 2023-24, Vol (II) INo 4.2.1) | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Along external wall where the apron is not provided using chemical emulsion @ 7.5 l/m of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete | Mtr | 117.6 | 117.6 | 130.0 | False | None | None | False | None | False | 15288.0 | 0 |
| 3816425 | 145018 | None | COMMON SR FOR 2023-24, INo 2.1.2 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical sp ecifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5947.2 | 5947.2 | 22.0 | False | None | None | False | None | False | 130838.4 | 0 |
| 3816426 | 145018 | None | COMMON SR FOR 2023-24, Volume(I) INo 2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical sp ecifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6527.85 | 6527.85 | 0.5 | False | None | None | False | None | False | 3263.925 | 0 |
| 3816427 | 145018 | None | COMMON SR FOR 2023-24, Volume(I) INo 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11309.76 | 11309.76 | 14.4 | False | None | None | False | None | False | 162860.544 | 0 |
| 3816428 | 145018 | None | COMMON SR 2023-24,Volume(I) INo 2.4.3 | Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal graded crushed coarse aggregates | Cum | 9979.2 | 9979.2 | 5.3 | False | None | None | False | None | False | 52889.76 | 0 |
| 3816429 | 145018 | None | COMMON SR 2023-24, Vol (I) P No 17 INo 2.4.2 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 8962.85 | 8962.85 | 1.5 | False | None | None | False | None | False | 13444.275 | 0 |
| 3816430 | 145018 | None | COMMON SR 2023-24,Volume(I) INo 2.11 (a) | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification | Tonne | 93929.85 | 93929.85 | 3.2 | False | None | None | False | None | False | 300575.52 | 0 |
| 3816431 | 145018 | None | COMMON SR 2023-24,Volume(I) INo 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m
and lift upto 1.5 m | Cum | 279.3 | 279.3 | 49.2 | False | None | None | False | None | False | 13741.56 | 0 |
| 3816432 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 6 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications | Sqm | 1375.5 | 1375.5 | 157.83 | False | None | None | False | None | False | 217095.165 | 0 |
| 3816433 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 9 | Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid tonline and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 1717.8 | 1717.8 | 92.1 | False | None | None | False | None | False | 158209.38 | 0 |
| 3816434 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, INo 8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 389.55 | 389.55 | 165.0 | False | None | None | False | None | False | 64275.75 | 0 |
| 3816435 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, INo 8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brickn wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 309.75 | 309.75 | 150.0 | False | None | None | False | None | False | 46462.5 | 0 |
| 3816436 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 9 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete | Sqm | 933.45 | 933.45 | 3.75 | False | None | None | False | None | False | 3500.4375 | 0 |
| 3816437 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 9 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications | Sqm | 1521.45 | 1521.45 | 20.0 | False | None | None | False | None | False | 30429.0 | 0 |
| 3816438 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 12 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 6878.55 | 6878.55 | 14.1 | False | None | None | False | None | False | 96987.555 | 0 |
| 3816439 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 1 | Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc | Kg | 192.15 | 192.15 | 300.0 | False | None | None | False | None | False | 57645.0 | 0 |
| 3816440 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge | Sqm | 105.0 | 105.0 | 328.5 | False | None | None | False | None | False | 34492.5 | 0 |
| 3816441 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 8 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required,
to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge | Sqm | 79.8 | 79.8 | 328.5 | False | None | None | False | None | False | 26214.3 | 0 |
| 3816442 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 8 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 145.95 | 145.95 | 14.1 | False | None | None | False | None | False | 2057.895 | 0 |
| 3816443 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, INo 12.55.2 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. -do- with one side prelam | Sqm | 2142.0 | 2142.0 | 88.56 | False | None | None | False | None | False | 189695.52 | 0 |
| 3816444 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, INo 11.6.1 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 2764.65 | 2764.65 | 38.25 | False | None | None | False | None | False | 105747.8625 | 0 |
| 3816445 | 145018 | None | COMMON SR 2023-24, Vol (II) IT.No.11.16.2 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Kg | 154.35 | 154.35 | 2684.5 | False | None | None | False | None | False | 414352.575 | 0 |
| 3816446 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, I.No. 7.38 ) | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | Sqm | 596.4 | 596.4 | 110.0 | False | None | None | False | None | False | 65604.0 | 0 |
| 3816447 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, Volume(II) INo 1 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm | Each | 1428.0 | 1428.0 | 1.0 | False | None | None | False | None | False | 1428.0 | 0 |
| 3816448 | 145018 | None | COMMON SR 2023-24, Vol (II) IT.No.13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Ltr | 9.0 | 9.0 | 1000.0 | False | None | None | False | None | False | 9000.0 | 0 |
| 3816449 | 145018 | None | COMMON SR FOR BUILDINGS 2023-24, INo 13.31.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes | Rmtr | 242.0 | 242.0 | 25.0 | False | None | None | False | None | False | 6050.0 | 0 |
| 3816450 | 145018 | None | COMMON SR 2023-24 Elec Work Vol-06 I.No 51.3.1 | ABC Stored Pressure Type FIRE EXTINGUISHER:IS 15683:2006- Attack Fire 9KG | Each | 7405.0 | 7405.0 | 3.0 | False | None | None | False | None | False | 22215.0 | 0 |
| 3816451 | 145018 | None | ELE-01 | Electrification @11.5% of est | LS | 258531.04 | 258531.04 | 1.0 | False | None | None | False | None | False | 258531.04 | 0 |
| 3816452 | 145018 | None | WS-01 | Water Supply & Sewarage @10.5% OF EST | LS | 236050.08 | 236050.08 | 1.0 | False | None | None | False | None | False | 236050.08 | 0 |
| 3816453 | 145018 | None | CCTV-01 | CCTV surveillance&GPS for vehicle: Comprising of twi IT Based Camaras with night visoin capability, UPS, NVR, Data Transmission to centralised facility (QUOTATION RATE APPROVAL DATA) | LS | 150450.0 | 150450.0 | 1.0 | False | None | None | False | None | False | 150450.0 | 0 |
| 3816454 | 145018 | None | PWD Ele SR 23-24 Vol-6 PG NO 40-41 I.No 10.1.1 | DIESEL GENERATOR SET: Diesel Generator 15KVA/12kw | Each | 349110.0 | 349110.0 | 1.0 | False | None | None | False | None | False | 349110.0 | 0 |
| 3816455 | 145018 | None | GST-18 | GST @ 18% FOR CIVIL WORK AND FOR MACHINARIES IT IS INCLUDED IN THE MACHINARIES ESTIMATION | LS | 587601.38 | 587601.38 | 1.0 | False | None | None | False | None | False | 587601.38 | 0 |