| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1724315886000 | 0 | None | None | Other Works | Proposed Development of Electrical works(Transformer) in SWM site at TP Chadchan | 273873.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3834959 | 146258 | None | PWD SR 2023-24 Vol:5 ESCOMs SR 2023-24 P.NO.7 I.N | Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014
B. CABLE ENTRY TYPE
100 kVA, Aluminium Wdg, Star 2 (5 Star) | No | 225576.0 | 225576.0 | 1.0 | False | None | None | False | None | False | 225576.0 | 0 | | 3834960 | 146258 | None | PWD SR 2023-24 Vol:5 ESCOMs SR 2023-24 P.NO.9 I.No | Double Pole TC Set for erection of Transformer on RCC/PSCC 9 Mtr Long Poles as per IS-1977
For 25/63/100 kVA 4/5 Star Rated Transformer on PSCC Pole - 9 Mtr Long, 300 Kg WL - GI | No | 24277.0 | 24277.0 | 1.0 | False | None | None | False | None | False | 24277.0 | 0 | | 3834961 | 146258 | None | PWD SR 2023-24 Vol:5 ESCOMs SR 2023-24 P.NO.9 I.No | Lightning Arrester as per IEC-60099-4
9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR(Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) | No | 920.0 | 920.0 | 3.0 | False | None | None | False | None | False | 2760.0 | 0 | | 3834962 | 146258 | None | PWD SR 2023-24 Vol:5 ESCOMs SR 2023-24 P.NO.11 I. | GOS as per IS-9921, IS-1977
11 kV, 400 Amps Double Break GOS | No | 21260.0 | 21260.0 | 1.0 | False | None | None | False | None | False | 21260.0 | 0 |
| | 1724315886000 | 0 | None | None | Other Works | Proposed Construction of Water Tank in SWM site at TP Chadchan | 139767.52 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3834963 | 146259 | None | PWD SR 2023-24 Vol- 1 P no -8 Item No : 1.14.1) | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work | Cum | 105.06 | 105.06 | 22.5 | False | None | None | False | None | False | 2363.85 | 0 | | 3834964 | 146259 | None | PWD SR 2023-24 Vol- 1 P no -11 Item No : 1.23) | Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. | Cum | 2762.46 | 2762.46 | 4.5 | False | None | None | False | None | False | 12431.07 | 0 | | 3834965 | 146259 | None | PWD SR 2023-24 Vol- 2 P no -15 Item No : 2.1.4 | Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.
Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6403.51 | 6403.51 | 1.5 | False | None | None | False | None | False | 9605.265 | 0 | | 3834966 | 146259 | None | PWD SR 2023-24 Vol- 1 P no -16 Item No : 2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite /trap /basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6828.84 | 6828.84 | 1.584 | False | None | None | False | None | False | 10816.88256 | 0 | | 3834967 | 146259 | None | PWD SR 2023-24 Vol- 5 P no -16 Item No :2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7491.9 | 7491.9 | 6.438 | False | None | None | False | None | False | 48232.8522 | 0 | | 3834968 | 146259 | None | PWD SR 2023-24 Vol- 2 P no -41 Item No :8.1.1 ) | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:
4 fine sand) to brick masonry including rounding off corners wherever
required smooth rendering, providing and removing scaffolding, including
cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 262.65 | 262.65 | 51.2 | False | None | None | False | None | False | 13447.68 | 0 | | 3834969 | 146259 | None | PWD SR 2023-24 Vol- 1 P no -18 Item No : 2.11) | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification
h.All other type of structures | Tonne | 81381.33 | 81381.33 | 0.481 | False | None | None | False | None | False | 39144.41973 | 0 | | 3834970 | 146259 | None | PWD SR 2023-24 Vol- 5 P no -120 Item No : 10.14.1 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing
of approved type with all labour charges and all lift charges, handling
charges including encasing the pipe around to a depth not less than
15 cms with gravel or selected earth available from the excavation etc.
complete.
4 Kg/m2: 63mm(weight of pipe -0.465 kg) | m | 120.51 | 120.51 | 9.0 | False | None | None | False | None | False | 1084.59 | 0 | | 3834971 | 146259 | None | BWSSB SR2023-24Vol- 5 P no -196 Item No : 16.23.2 | Supplying and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete. ( CM SR 2023-24 P.No.196/Vol-5/ 16.23.2)Heavy Duty | No | 2640.92 | 2640.92 | 1.0 | False | None | None | False | None | False | 2640.92 | 0 |
| | 1724315886000 | 0 | None | None | Other Works | Proposed Development of Borewell Works in SWM site at TP Chadchan | 231161.87 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3834972 | 146260 | None | BWSSB SR 2023-24P No.139It No 12.1.1, ) | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of
capacity 300 PSIG & above 1100 CMF & above in all strata including
over burdern upto 20 m. Fixing of casing pipes, collars and cap with
necessary cutting, threading and welding including transportation of
rig and supporting vehicle, crew charges and cost of consumables etc.,
complete including yield testing at the final depth with a minimum
working of compressor for one hour (Excluding cost of casing pipes,
collars, cap etc., complete )
Upto 50m depth | m | 381.1 | 381.1 | 50.0 | False | None | None | False | None | False | 19055.0 | 0 | | 3834973 | 146260 | None | BWSSB SR 2023-24P No.139It No 12.1.2) | Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG &above 900 CFM & above in all strata including over burden upto 20mtrs. Fixing of casing pipes, collars &cap with necessary cutting,threading & welding including transportation of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour(excluding cost of casing pipes collars and cap etc.) (BWSSB SR 2023-24P No. 151 It No 1.1, 1.2, 1.3).
Above 50m & upto 100m depth | m | 477.92 | 477.92 | 50.0 | False | None | None | False | None | False | 23896.0 | 0 | | 3834974 | 146260 | None | BWSSB SR 2023-24P No.139It No 12.1.3 ) | Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG &above 900 CFM & above in all strata including over burden upto 20mtrs. Fixing of casing pipes, collars &cap with necessary cutting,threading & welding including transportation of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour(excluding cost of casing pipes collars and cap etc.) (BWSSB SR 2023-24P No. 151 It No 1.1, 1.2, 1.3)
Above 100m & upto 150m depth | m | 507.79 | 507.79 | 50.0 | False | None | None | False | None | False | 25389.5 | 0 | | 3834975 | 146260 | None | BWSSB SR 2023-24P No.139It No 12.1.4 ) | Sinking of Borewell of 165mm dia clear using super fast hydraulic Rig of capacity 250 PSIG &above 900 CFM & above in all strata including over burden upto 20mtrs. Fixing of casing pipes, collars &cap with necessary cutting,threading & welding including transportation of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour(excluding cost of casing pipes collars and cap etc.) (BWSSB SR 2023-24P No. 151 It No 1.1, 1.2, 1.3)
Above 150m & upto 200m depth | m | 589.16 | 589.16 | 40.0 | False | None | None | False | None | False | 23566.4 | 0 | | 3834976 | 146260 | None | BWSSB SR 2023-24 VOL-5 Page No-120 I.N-10.14.12 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.PVC PIPES OF 6 Kg./Cm2 (BWSSB SR 2023-24P No. 154 It No 32) | m | 533.54 | 533.54 | 170.0 | False | None | None | False | None | False | 90701.8 | 0 | | 3834977 | 146260 | None | BWSSB SR 2023-24P No. 143 It No 12.34) | Providing 200mm PVC casing cap including fixing charges (BWSSB SR 2023-24P No. 155 It No 34) | m | 168.92 | 168.92 | 1.0 | False | None | None | False | None | False | 168.92 | 0 | | 3834978 | 146260 | None | BWSSB SR2023-24 Vol:5P.NO.17 I.No:12.4 | Geophysical Investigation of site for sinking Borewell Geophysical Investigation of site for sinking Borewell for supplying drinking water to the habitation either through a hand pump, Mini Water Supply scheme, or Piped Water Supply Scheme by vertical electrical sounding by adopting venner or Schlumberger's method, including reconnaissance survey of geological formation, geophysical investigation of existing ground water in the vicinity, its quality, quantity & acceptability of the users indicating the location of site, recommended depth of casing pipe required to seal the top unconsolidated formation incluing an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instrument and accessories to work site, engaging technical personal and labour required etc., complete.(BWSSB SR 2023-24P No. 151 It No 4) | Nos | 5446.64 | 5446.64 | 1.0 | False | None | None | False | None | False | 5446.64 | 0 | | 3834979 | 146260 | None | BWSSB SR 2023-24P No. 152 It No 13.13.6) | Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments.5.00 HP/1.5KW 12 STG .(BWSSB SR 2023-24P No. 160 It No 13.60) 5.00 HP - 90 LPM @ 110 m = 10 STG Outlet Dia - 2.00” | Set | 33101.11 | 33101.11 | 1.0 | False | None | None | False | None | False | 33101.11 | 0 | | 3834980 | 146260 | None | BWSSB SR 2023-24P No. 154 It No 13.23.2) | Supply, installing,testing and commissioning COMMON control panel
consisting of the following INCOMING:1 No set of Phase indicating
lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog
Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING
for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable
for respective HP 1 No. Electrcal Protection Like single Phase preventor,
under voltage over Volage, under current over current & dry run
protection suitable for the pump described above 1 no Indoor type NOTE:
1) DOL- Direct Online Starter
2) S-D- Star Delta Starter etc. complete. | Nos | 9836.5 | 9836.5 | 1.0 | False | None | None | False | None | False | 9836.5 | 0 |
| | 1724315886000 | 0 | None | None | Other Works | Proposed Development of Office cum Security room with Electrical works in SWM site at TP Chadchan | 717963.9 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3834981 | 146261 | None | Page No.08. Item No.1.14.1 V1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In All Types of Soil Depth Upto 3Mtrs | Cum | 105.06 | 105.06 | 21.99 | False | None | None | False | None | False | 2310.2694 | 0 | | 3834982 | 146261 | None | Page No.15 Item No.2.1.3 V1 RIR | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6168.67 | 6168.67 | 2.521 | False | None | None | False | None | False | 15551.21707 | 0 | | 3834983 | 146261 | None | Page No.09 Item No.5.1.1 V2 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand :12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5779.33 | 5779.33 | 6.624 | False | None | None | False | None | False | 38282.28192 | 0 | | 3834984 | 146261 | None | Page No.16 Item No.2.5.1 V1 RIR | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 1) Refer Appendix-I For Formwork, Centering, Scaffolding of Isolated Footing is 8% (Pg No 115 of Common SR 2021-22) | Cum | 10243.35 | 10243.35 | 11.79 | False | None | None | False | None | False | 120769.0965 | 0 | | 3834985 | 146261 | None | Page No.16 Item No.2.5.2 V1 RIR | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 1) Refer Appendix-I For Formwork, Centering, Scaffolding of columns is 70% (Pg No 115 of Common SR 2021-22) | Cum | 11982.09 | 11982.09 | 3.66 | False | None | None | False | None | False | 43854.4494 | 0 | | 3834986 | 146261 | None | Page No.84 Item No.11.32 V2 RIR | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | MT | 92140.71 | 92140.71 | 1.159 | False | None | None | False | None | False | 106791.08289 | 0 | | 3834987 | 146261 | None | Page No.14 Item No.6.8 V2 RIR | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8208.07 | 8208.07 | 17.2986 | False | None | None | False | None | False | 141988.119702 | 0 | | 3834988 | 146261 | None | Page No.85 Item No.11.34B V2 RIR | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 188.49 | 188.49 | 60.48 | False | None | None | False | None | False | 11399.8752 | 0 | | 3834989 | 146261 | None | Page No.41 Item No.8.5.2 V2 | Providing 15 mm cement plaster on rough side of single or half brick wallfinished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge 1) Refer Appendix-I For Formwork, Centering, Scaffolding of plastering is 25% (Pg No 115 of Common SR 2021-22) | Sqm | 359.47 | 359.47 | 92.98 | False | None | None | False | None | False | 33423.5206 | 0 | | 3834990 | 146261 | None | Page No.42 Item No.8.9V2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ) Refer Appendix-I For Formwork, Centering, Scaffolding of plastering is 25% (Pg No 115 of Common SR 2021-22) | Sqm | 396.55 | 396.55 | 59.17 | False | None | None | False | None | False | 23463.8635 | 0 | | 3834991 | 146261 | None | Page No.42 Item No.8.6.1 V2 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Refer Appendix-I For Formwork, Centering, Scaffolding of plastering is 25% (Pg No 115 of Common SR 2021-22) | Sqm | 332.69 | 332.69 | 29.2974 | False | None | None | False | None | False | 9746.952006 | 0 | | 3834992 | 146261 | None | Page No.45 Item No.8.28 V2 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Refer Appendix-I For Formwork, Centering, Scaffolding of painting is 25% (Pg No 115 of Common SR 2021-22) | Sqm | 91.67 | 91.67 | 59.174 | False | None | None | False | None | False | 5424.48058 | 0 | | 3834993 | 146261 | None | Page No.45 Item No.8.25 V2 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Refer Appendix-I For Formwork, Centering, Scaffolding of painting is 25% (Pg No 115 of Common SR 2021-22). | Sqm | 141.11 | 141.11 | 122.28 | False | None | None | False | None | False | 17254.9308 | 0 | | 3834994 | 146261 | None | Page No.60 Item No.9.12.2 V2 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cemen slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm | Sqm | 1179.35 | 1179.35 | 18.0 | False | None | None | False | None | False | 21228.3 | 0 | | 3834995 | 146261 | None | Page No.48 Item No.8.41 V2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint
of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 172.01 | 172.01 | 2.88 | False | None | None | False | None | False | 495.3888 | 0 | | 3834996 | 146261 | None | Page No.104 Item No.12.54 V2 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with
19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to th wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | m | 327.54 | 327.54 | 13.2 | False | None | None | False | None | False | 4323.528 | 0 | | 3834997 | 146261 | None | PAGE NO 108 I NO 12.84 V2 | PProviding & fixing of 2-trackx2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive
of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 5173.69 | 5173.69 | 3.55 | False | None | None | False | None | False | 18366.5995 | 0 | | 3834998 | 146261 | None | Page No.65 Item No.9.38 V2 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. | Sqm | 1433.76 | 1433.76 | 17.38 | False | None | None | False | None | False | 24918.7488 | 0 | | 3834999 | 146261 | None | Page No.07 Item No.1.9 V1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 273.98 | 273.98 | 0.95 | False | None | None | False | None | False | 260.281 | 0 | | 3835000 | 146261 | None | PAGE NO 56 I NO 13.7.1 V6 ELECTRICAL SR | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders | Each | 125.66 | 125.66 | 5.0 | False | None | None | False | None | False | 628.3 | 0 | | 3835001 | 146261 | None | Page No.34 Item No.11.3.2 | Supplying of feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burninghours & 70 lumen maintenance with CRI 80. PowerInput: 220-240V 50/60Hz & Power factor 0.9 along with CEapproved. 2 years Warranty against any manufacturing defectworking under standard electrical condition.LED light fitting 1 x 4' - 20/22 W | Each | 710.7 | 710.7 | 3.0 | False | None | None | False | None | False | 2132.1 | 0 | | 3835002 | 146261 | None | Page No.46 Item No.13.18.1 | Fixing of ..... Amps TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labeling 15A to 63A TPST (PWD Electrical SR 2022-23 P no 46 I no 13.18.1) | Mtr | 286.34 | 286.34 | 2.0 | False | None | None | False | None | False | 572.68 | 0 | | 3835003 | 146261 | None | Page No.10 Item No.5.5.2 | Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour. (PWD Electrical SR 2022-23 P no. 10 I no 5.5.2) 63Amps | Nos | 4319.74 | 4319.74 | 2.0 | False | None | None | False | None | False | 8639.48 | 0 | | 3835004 | 146261 | None | PAGE NO 3 I NO 1.9.2 V6 ELECTRICAL SR | Supplying PVC/GI flexible conduit pipe .... mm dia fixing onsurface over inverted tapered wooden plugs or phill plugs orrawl plugs and clamped using heavy gauge saddles at aninterval of 300 mm using NF screws and on either end of thepipe terminated completely 25 mm | Mtr | 22.66 | 22.66 | 50.0 | False | None | None | False | None | False | 1133.0 | 0 | | 3835005 | 146261 | None | PAGE NO 3 I NO 1.8.2 V6 ELECTRICAL SR | Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box,elbows, screws at an interval of 300 mm .... etc. as required.25mm | Each | 36.05 | 36.05 | 50.0 | False | None | None | False | None | False | 1802.5 | 0 | | 3835006 | 146261 | None | Page No.08 Item No.3.3.7 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (PWD Electrical SR 2022-23 P No 5 I no 3.3.6) 16-18 Way | Mtr | 302.82 | 302.82 | 4.0 | False | None | None | False | None | False | 1211.28 | 0 | | 3835007 | 146261 | None | PAGE NO 51 I NO 6.7 V6 ELECTRICAL SR | Supplying & fixing modular swich/socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate (6Amps one way) | Mtr | 185.4 | 185.4 | 4.0 | False | None | None | False | None | False | 741.6 | 0 | | 3835008 | 146261 | None | Page No.8 Item No.3.5.4 | Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.6 Module | Each | 241.02 | 241.02 | 1.0 | False | None | None | False | None | False | 241.02 | 0 | | 3835009 | 146261 | None | Page No.05 Item No.2.3.2 | Wiring for lighting/power circuit using one of FRLS PVCnsulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1.5Sqmm | Mtr | 26.78 | 26.78 | 4.0 | False | None | None | False | None | False | 107.12 | 0 | | 3835010 | 146261 | None | Page No.05 Item No.2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. | Each | 64.89 | 64.89 | 4.0 | False | None | None | False | None | False | 259.56 | 0 | | 3835011 | 146261 | None | Page No.8 Item No.3.1.1 | Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS1293 and IS 3654 6A 2 Way | Each | 131.84 | 131.84 | 2.0 | False | None | None | False | None | False | 263.68 | 0 | | 3835012 | 146261 | None | Page No.9 Item No.3.6.6 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.600w dimmer | Each | 338.87 | 338.87 | 1.0 | False | None | None | False | None | False | 338.87 | 0 | | 3835013 | 146261 | None | Page No.9 Item No.3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal Socket | Each | 243.08 | 243.08 | 1.0 | False | None | None | False | None | False | 243.08 | 0 | | 3835014 | 146261 | None | Page No.9 Item No.3.6.7 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch | Each | 185.4 | 185.4 | 1.0 | False | None | None | False | None | False | 185.4 | 0 | | 3835015 | 146261 | None | Page No.18 Item No.5.18.9 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A TPN | Each | 3180.64 | 3180.64 | 1.0 | False | None | None | False | None | False | 3180.64 | 0 | | 3835016 | 146261 | None | Page No.18 Item No.5.19.2 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.6 Way SP & N | Mtr | 1221.58 | 1221.58 | 1.0 | False | None | None | False | None | False | 1221.58 | 0 | | 3835017 | 146261 | None | Page No.54 Item No.12.56 | Supplying and fixing Wiring Earth Electrode For grounding conduits ic cutouts on the meter board using 40mm dia 2.90mm thick GI Pipe 2.50mtr long burried in a pit the pit should be filled up with equal propotion of salt & charcoal 150mm alll around the pipe to complete depth pwd ele SR 2019-20 P.No 40 I.No 6.1 | Mtr | 3615.3 | 3615.3 | 1.0 | False | None | None | False | None | False | 3615.3 | 0 | | 3835018 | 146261 | None | Code 38 | For Electrical & Hescom Charges | Each | 8000.0 | 8000.0 | 1.0 | False | None | None | False | None | False | 8000.0 | 0 | | 3835019 | 146261 | None | Sl No.122 Item No.13.31.2 Vol 2 | Providing & Fixing CPVC Pipes having thermal steability of hot & cold water supply including fixing the pipe clamp @ 1mtr spacing this includes jointing of pipes etc with CPVC Salvent 20mm nominal od pipe pwd sr 2021-22 1st addendum Vol2 sl no 09 ino 13.31.2 | m | 249.26 | 249.26 | 30.0 | False | None | None | False | None | False | 7477.8 | 0 | | 3835020 | 146261 | None | Page No.122 Item No.13.32.1 Vol 2 | Providing & Fixing CPVC Pipes having thermal steability of hot & cold water supply including fixing the pipe clamp @ 1mtr spacing this includes jointing of pipes etc with CPVC Salvent 15mm nominal od pipe pwd sr 2021-22 1st addendum Vol2 sl no 09 ino 13.31.2 | Mtr | 318.27 | 318.27 | 30.0 | False | None | None | False | None | False | 9548.1 | 0 | | 3835021 | 146261 | None | Page No.117 Item No.13.2.2 Vol 2 | Providing & Fixing brass bib cock of approved quality pwd sr 2021-2 vol 2 pg no 115 i.no 13.21.1 | Nos | 314.15 | 314.15 | 2.0 | False | None | None | False | None | False | 628.3 | 0 | | 3835022 | 146261 | None | Page No.113 Item No.10.1.5 v5 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 75mm dia., 6 kg/sqcm & class 3 PWD SR 2021-22 Page no-134 I.NO-1.5 | Mtr | 226.6 | 226.6 | 15.0 | False | None | None | False | None | False | 3399.0 | 0 | | 3835023 | 146261 | None | Page No.132 Item No.14.7.1 v2 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps PWD SR 2021-22 vol-2 page no-124 I.No-14.7.1 | Each | 3174.46 | 3174.46 | 2.0 | False | None | None | False | None | False | 6348.92 | 0 | | 3835024 | 146261 | None | Page No.135 Item No.14.22A Vol 2 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.PWD SR 2021-22 Vol-2 page no 127 I.No-14.22A | Each | 834.3 | 834.3 | 2.0 | False | None | None | False | None | False | 1668.6 | 0 | | 3835025 | 146261 | None | Page No.136 Item No.14.28.2.1 Vol 2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.PWD SR 2021-22 Vol-2 page no 127 I.No- 14.28.2 Flexible pipe | Each | 94.76 | 94.76 | 2.0 | False | None | None | False | None | False | 189.52 | 0 | | 3835026 | 146261 | None | Page No.12 Item No.13.34 | Providing & Fixing on terrace on polythene water storage tank marked with cover & suitable locking arrangements (pwd sr 2021-22 1st addedam vol 2 sl/no 12.1 i.no 13.34 | l | 9.27 | 9.27 | 500.0 | False | None | None | False | None | False | 4635.0 | 0 | | 3835027 | 146261 | None | Page No.117 Item No.13.5.1 v2 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:15 mm nominal bore (PWD SR 2021-22 Vol:2 P.NO.115 I.No:13.5.1) | Nos | 304.88 | 304.88 | 1.0 | False | None | None | False | None | False | 304.88 | 0 | | 3835028 | 146261 | None | Page No.191 Item No.16.10 Vol 5 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. PWD SR 2021-22 vol-5 Page no-187 I.No-10 | Each | 4363.08 | 4363.08 | 1.0 | False | None | None | False | None | False | 4363.08 | 0 | | 3835029 | 146261 | None | VOL 2 PAGE NO 131 INO 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (PWD SR 2023-24 Vol:2 P.NO. 123 I.No:14.1.1) | Each | 5030.52 | 5030.52 | 1.0 | False | None | None | False | None | False | 5030.52 | 0 |
|
|
|---|