| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1724064647000 | 0 | None | None | Buildings | Construction of Gram Panchayat office building in Hunagund Village of Shiggaon Thaluk | 1573286.16 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3811703 | 144718 | None | 9.12.2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (PWD SR 23-24 Vol 2 Page No. 60 Item No. 9.12.2) | Sqm | 1145.0 | 1145.0 | 93.47 | False | None | None | False | None | False | 107023.15 | 0 | | 3811704 | 144718 | None | 9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.(PWD SR 23-24 Vol 2 Page No. 65 Item No. 9.39 | Sqm | 1449.0 | 1449.0 | 188.27 | False | None | None | False | None | False | 272803.23 | 0 | | 3811705 | 144718 | None | 12.84 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall
be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2mm. Maximum possible size 219mm x 1219mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 5023.0 | 5023.0 | 23.4 | False | None | None | False | None | False | 117538.2 | 0 | | 3811706 | 144718 | None | 12.12 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but ncluding cost of materials, labour, usage charges complete as per specifications(PWD SR 23-24 Vol 2 Page No.100, Item No. 12.12) | Cum | 124202.0 | 124202.0 | 0.53 | False | None | None | False | None | False | 65827.06 | 0 | | 3811707 | 144718 | None | 12.15 | Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)(PWD SR 23-24 Vol 2 Page No.100, Item No. 12.15) | Sqm | 7444.0 | 7444.0 | 22.05 | False | None | None | False | None | False | 164140.2 | 0 | | 3811708 | 144718 | None | 8.33.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)(PWD SR 23-24 Vol 2 Page No. 81 Item No.8.33.1) | Sqm | 158.0 | 158.0 | 393.38 | False | None | None | False | None | False | 62154.04 | 0 | | 3811709 | 144718 | None | 8.33.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)(PWD SR 23-24 Vol 2 Page No. 81 Item No.8.33.1) | Sqm | 158.0 | 158.0 | 240.18 | False | None | None | False | None | False | 37948.44 | 0 | | 3811710 | 144718 | None | 11.37.3 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications.(PWD SR 23-24 Vol 2 Page No.89. Item No.11.37.3) | Sqm | 1305.0 | 1305.0 | 36.0 | False | None | None | False | None | False | 46980.0 | 0 | | 3811711 | 144718 | None | 11.16.1 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR 21-22 Vol 2 Page No. 81 Item No. 11.16.1) | Kg | 136.0 | 136.0 | 191.41 | False | None | None | False | None | False | 26031.76 | 0 | | 3811712 | 144718 | None | 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests(PWD SR 23-24 Vol 2 Page No.123, I.No. 14.1.1) | Nos | 4884.0 | 4884.0 | 1.0 | False | None | None | False | None | False | 4884.0 | 0 | | 3811713 | 144718 | None | 14.2.1 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :(PWD SR 23-24 Vol 2 Page No.123, I.No. 14.2.1) | Nos | 4838.0 | 4838.0 | 1.0 | False | None | None | False | None | False | 4838.0 | 0 | | 3811714 | 144718 | None | 11.3 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge(PWD SR 23-24 Vol 2 Page No.75 Item No. 11.3) | Sqm | 8276.0 | 8276.0 | 3.15 | False | None | None | False | None | False | 26069.4 | 0 | | 3811715 | 144718 | None | 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR 23-24 Vol 2 Page No. 50 Item No. 8.51) | Sqm | 100.0 | 100.0 | 393.38 | False | None | None | False | None | False | 39338.0 | 0 | | 3811716 | 144718 | None | 7.28.1 | Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh
fixed to wooden frame. Flat surfaces (PWD SR 23-24 Vol 2 Page No. 24 Item No. 7.28.1) | Sqm | 1274.0 | 1274.0 | 94.82 | False | None | None | False | None | False | 120800.68 | 0 | | 3811717 | 144718 | None | 10.0 | providing supplying and fixing modular table of size 2100mm Wx 750mm Dx 750mm Ht gable end of 40mm thick PLPB with 2mm thick PCV edge band finished as per approved finishes one on one end and rested upon the composite side storage on the other end wire management filpup above the table top dump box bable tray mounted below the able thick PLPB modesty upto 450mm in front Table top made out of 40mm thick PLPB with 2mm thick PVC edge band side coposite storage of size (1700mm(L)x 450mm (d) x 650mm (Ht) with 18mm thick PLPB with 2mm machine edge banding doors with lock etc complete including cost and conveyance of all materials labour for all items of work HOM of machinery and equlpment with all lead and lift loading and unloading transportation and all other incldental charges etc complet as per directions of the engineer in charge of the work(approved CEO SL No 10) | Nos | 81600.0 | 81600.0 | 1.0 | False | None | None | False | None | False | 81600.0 | 0 | | 3811718 | 144718 | None | 09.0 | Providing supplying and fixing cabin Modular Table (size of 1800mm (W) x 750mm D x 750mm Ht) end leg are powder coated of M S 40mm tube beam connectors of M S tube 40x20mm wire management flipup above the table top below tatile dump box/cable tray modesty upto 40mm in front table top made of 25mm thick ppb (prelaminated partice board ) with 2mm thick PVC edge band finished as per approved veriticle riser from floor towards table top side storage (size of 1050mm(L) x 450mm(D) x 750mm(HT) primary material of 18mm thick PPB with 2mm machine edge banding doors with lock back storage (size of 1950mm(L) x 450mm (D) x 750mm(Ht primary material of 18mm thick PLPB with 2mm thick machine edge banding doors with lock etc complete including cost and conveyance of all materials labour for all items of work HOM of machinery and equlpment with all lead and lift loading and unloading transportation and all other incdental charges etc complete as per dirctions of the engineer in charrgeof the work (approved CEO SL No 9) | Nos | 46660.0 | 46660.0 | 1.0 | False | None | None | False | None | False | 46660.0 | 0 | | 3811719 | 144718 | None | 12.0 | providing and supplying of modular conference table size of 5460mm (W) x 2100mm (D) x 750mm HT) Middle and end leggs are powder coated of M S mm tube beam connectors of MS tube 40mm x 20mm fillpup above the table top below table dump box / cable tray table top of 40mm thick ply with 2mm edge band machine pressed as per approved including cost and conveyance of all materials labour for all items of work HOM of Machinery and equipment with all lead and lift loading and unloading transportation and all tother incldental charges etc complete as per directions of the engineer in charge of the work (approved CEO SL No 12) | Nos | 165000.0 | 165000.0 | 1.0 | False | None | None | False | None | False | 165000.0 | 0 | | 3811720 | 144718 | None | 24.0 | Manufacturing supplying of Executive push Back chair optima with lumber support backside amrest with 3 way chrome bar base maximum comfort harmonius integration of form material and technology gas lift fabric finish synchro till machanism etc complete includng cost and covayance of all materials labour for all items of work HOM of chainery and equlpment with all lead and lift loading and unloading transporttaion and all other incldental charges etc cmplete as per directions of the engineer in charge of the work (approved CEO SL No 24) | Nos | 16000.0 | 16000.0 | 3.0 | False | None | None | False | None | False | 48000.0 | 0 | | 3811721 | 144718 | None | 54.00 | proving supplying and fixing conference room chira with netted butterfly back rest adjustable arm rest lumber support seat fabric breathable with high densily cushion base made out of chrome supported with castor wheals sea fabric gray the cost includes all materials labour equipment machineries all lead and lift loading and unloading transportation and all other incldental charges etc complete as per directions of the engeneer in charge the work (approved CEO SL No54) | Nos | 6850.0 | 6850.0 | 10.0 | False | None | None | False | None | False | 68500.0 | 0 | | 3811722 | 144718 | None | 13.1.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes .(PWD SR 23-24 Vol 2 Page No. 121 Item No. 13.1.2.) | Mtr | 242.0 | 242.0 | 200.0 | False | None | None | False | None | False | 48400.0 | 0 | | 3811723 | 144718 | None | 13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .(PWD SR 23-24 Vol 2 Page No. 123 Item No. 13.34.) | Ltr | 9.0 | 9.0 | 2000.0 | False | None | None | False | None | False | 18000.0 | 0 | | 3811724 | 144718 | None | 591 | P.T.M.T. Bib cock with nozzle 15mm (PWD SR 23-24 Vol 2 Page No.A30 Sl No. 591) | Nos | 150.0 | 150.0 | 5.0 | False | None | None | False | None | False | 750.0 | 0 |
| | 1724064647000 | 0 | None | None | Buildings | Construction of Gram Panchayat office building in Hunagund Village of Shiggaon Thaluk (Electrical) | 79589.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3811725 | 144719 | None | 1.2.1 | Supplying heavy gauge PVC conduit pipe . mmdia.mm thick confirming to IS 2509 with suitable sizebends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tiedto the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be coveredusing PVC end enclosures, run with 18SWG GI fish wirewherever necessary 19/20 mm dia 2 mm thick (Item No-1.2.1 Page No-1 PWD Electrical SR 2023-24) | m | 66.0 | 66.0 | 60.0 | False | None | None | False | None | False | 3960.0 | 0 | | 3811726 | 144719 | None | 1.3.1 | Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2 mm thick (Item No-1.3.1 Page No-1 PWD Electrical SR 2023-24) | m | 68.0 | 68.0 | 60.0 | False | None | None | False | None | False | 4080.0 | 0 | | 3811727 | 144719 | None | 2.1.1 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2(Phase & Neutral)& 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let Short point upto 3m from tapping point to out let via switch (Item No2.1.1 Page No-2 PWD Electrical SR 2023-24) | No | 285.0 | 285.0 | 6.0 | False | None | None | False | None | False | 1710.0 | 0 | | 3811728 | 144719 | None | 2.1.2 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2(Phase & Neutral)& 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to outlet. Medium point above 3m upto 6m from tapping point to outlet via switch. (Item No2.1.2 Page No-2 PWD Electrical SR 2023-24) | No | 394.0 | 394.0 | 6.0 | False | None | None | False | None | False | 2364.0 | 0 | | 3811729 | 144719 | None | 2.1.3 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch (Item No2.1.3 Page No-2 PWD Electrical SR 2023-24) | No | 570.0 | 570.0 | 6.0 | False | None | None | False | None | False | 3420.0 | 0 | | 3811730 | 144719 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall 1-3 Way. (Item No3.4.1 Page No-5 PWD Electrical SR 2023-24) | No | 138.0 | 138.0 | 6.0 | False | None | None | False | None | False | 828.0 | 0 | | 3811731 | 144719 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module (Item No3.5.1 Page No-5 PWD Electrical SR2023-24) | No | 137.0 | 137.0 | 13.0 | False | None | None | False | None | False | 1781.0 | 0 | | 3811732 | 144719 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module (Item No3.5.5 Page No-5 PWD Electrical SR 2021-22) | No | 284.0 | 284.0 | 25.0 | False | None | None | False | None | False | 7100.0 | 0 | | 3811733 | 144719 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. using group A materials A 32A DP Switch (Item No3.6.9 Page No-5 PWD Electrical SR 2023-24) | No | 326.0 | 326.0 | 4.0 | False | None | None | False | None | False | 1304.0 | 0 | | 3811734 | 144719 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 using group A A materials 6A One Way Switch.(Item No3.6.1 Page No-5 PWD Electrical SR 2023-24)) | Each | 102.0 | 102.0 | 8.0 | False | None | None | False | None | False | 816.0 | 0 | | 3811735 | 144719 | None | 3.6.2 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Using group A materials 6A Two Way Switch. (Item No3.6.2 Page No-5 PWD Electrical SR 2023-24)) | Each | 166.0 | 166.0 | 4.0 | False | None | None | False | None | False | 664.0 | 0 | | 3811736 | 144719 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 using group A materials. Stepped Fan Regulator Two Module. (Item No3.6.4 Page No-5 PWD Electrical SR 2023-24)) | Each | 357.0 | 357.0 | 4.0 | False | None | None | False | None | False | 1428.0 | 0 | | 3811737 | 144719 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 using group A materials 6A Three Way socket. (Item No3.6.3 Page No-5 PWD Electrical SR 2023-24)) | Each | 171.0 | 171.0 | 6.0 | False | None | None | False | None | False | 1026.0 | 0 | | 3811738 | 144719 | None | 3.6.11 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 using group A materials TV/Telephone Socket.(Item No3.6.11 Page No-5 PWD Electrical SR 2023-24)) | Each | 156.0 | 156.0 | 2.0 | False | None | None | False | None | False | 312.0 | 0 | | 3811739 | 144719 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. conforming to GTP of Ground -B 1.5 mm2 Item No2.3.2 Page No-3 PWD Electrical SR 2023-24)) | m | 26.0 | 26.0 | 150.0 | False | None | None | False | None | False | 3900.0 | 0 | | 3811740 | 144719 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. conforming to GTP of Ground -B 2.5sqmm (Item No2.3.3 Page No-3 PWD Electrical SR 2023-24)) | m | 42.0 | 42.0 | 145.0 | False | None | None | False | None | False | 6090.0 | 0 | | 3811741 | 144719 | None | 3.14.3 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 32 Amps Bakelite DP Group A 6A Three Way 5 Pin Socket (Item No3.14.3Page No-6 PWD Electrical SR 2021-22) | No | 70.0 | 70.0 | 6.0 | False | None | None | False | None | False | 420.0 | 0 | | 3811742 | 144719 | None | 12.26.2 | Supplying of box fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF Electronic Ballast, Operating voltage range from 180V to 265V, 50Hz AC power supply excluding Ballast & Flourasent Tube 1 x 4' Tube light fitting. (Item No12.26.2Page No-40 PWD Electrical SR 2023-24)) | Each | 461.0 | 461.0 | 2.0 | False | None | None | False | None | False | 922.0 | 0 | | 3811743 | 144719 | None | 13.7.1 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamp On wall/ ceiling / Rafter / Girders. (Item No13.7.1Page No-45 PWD Electrical SR 2023-24)) | No | 122.0 | 122.0 | 6.0 | False | None | None | False | None | False | 732.0 | 0 | | 3811744 | 144719 | None | 12.21 | Supplying and fixing of 5'-80 W of T8 Fluorescent Tube with 54W power consumption with low 3mg Mercury content less phosphor coating Operating voltage range from 180V to 265V, 50Hz AC power Supply . (Item No 12.21Page No-50 PWD Electrical SR 2023-24)) | No | 520.0 | 520.0 | 6.0 | False | None | None | False | None | False | 3120.0 | 0 | | 3811745 | 144719 | None | 6.3.1 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model. (Item No6.3.1Page No-22 PWD Electrical SR 2023-24)) | No | 2984.0 | 2984.0 | 8.0 | False | None | None | False | None | False | 23872.0 | 0 | | 3811746 | 144719 | None | 13.19 | Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twiste PVC insulated wires, required Nos of round blocks and clamps.(Item No-13.19Page No-47 PWD Electrical SR 2023-24)) | No | 490.0 | 490.0 | 8.0 | False | None | None | False | None | False | 3920.0 | 0 | | 3811747 | 144719 | None | 13.11 | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.(Item No-13.11Page No-46 PWD Electrical SR 2023-24) | No | 315.0 | 315.0 | 1.0 | False | None | None | False | None | False | 315.0 | 0 | | 3811748 | 144719 | None | 5.7.2 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers complete 32 A. (Item No-5.7.2Page No-10 PWD Electrical SR 2021-22) | No | 241.0 | 241.0 | 4.0 | False | None | None | False | None | False | 964.0 | 0 | | 3811749 | 144719 | None | 5.18.1 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP (Item No-5.18.1Page No-13 PWD Electrical SR 2023-24)) | No | 415.0 | 415.0 | 1.0 | False | None | None | False | None | False | 415.0 | 0 | | 3811750 | 144719 | None | 5.19.4 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.12 Way SP & N (Item No-5.19.4Page No-13 PWD Electrical SR2023-24) | No | 1863.0 | 1863.0 | 2.0 | False | None | None | False | None | False | 3726.0 | 0 | | 3811751 | 144719 | None | 5.42.1 | Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finishedwith approved colour etc., complete.14 SWG (Item No-5.42.1Page No-30 PWD Electrical SR 2023-24) | Sq CM | 0.5 | 0.5 | 800.0 | False | None | None | False | None | False | 400.0 | 0 |
|
|
|---|