createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724400411575 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 895000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 06-09-2024 16:00:00 tenderQueryClose 28-08-2024 16:00:00 technicalBidOpen 09-09-2024 16:00:00 publishedDate 23-08-2024 16:57:58 publishedByPost KHB_EE_CO_BNG publishedByUser KPE11677 - SHIVASHANKARAPPA K H bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 29-08-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson SHIVASHANKARAPPA K H splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022273511 mobileNumber 8022273511 tenderSupplierList None
tenderSchedule	createdTs 1724400411596 version 7 createdDate None modifiedDate None tenderNumber KHB/2024-25/BD/WORK_INDENT255 title Construction of Rani Abbakka Bhavana in Sy No.82/1A, 2P4 of Permannur Village, Thokkottu, Ullala, Mangaluru, Dakshina Kannada District description Construction of Rani Abbakka Bhavana in Sy No.82/1A, 2P4 of Permannur Village, Thokkottu, Ullala, Mangaluru, Dakshina Kannada District category WORKS categoryText Works ecv 59667642.86 deptName Karnataka Housing Board status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 5488 locationName KHB Central Office Bengaluru provisionalAmount 59667643.0 groupOverheadTotal None fileNumber 210/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724400412000 1 None None Buildings Construction of Rani Abbakka Bhavana in Sy No.82/1A, 2P4 of Permannur Village, Thokkottu, Ullala, Mangaluru, Dakshina Kannada District 59667642.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3844890 146735 None code01 BUILDING CIVIL WORK: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.-By Mechanical Means using Dozer-In area of thorny jungle. 100 Sqm Sqm 542.08 542.08 16.9 False None None False None False 9161.152 0 3844891 146735 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m- Cum 114.24 114.24 3312.6 False None None False None False 378431.424 0 3844892 146735 None code03 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth. Cum 406.56 406.56 414.08 False None None False None False 168348.3648 0 3844893 146735 None code04 Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading,caution lights, removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m. Cum 271.04 271.04 414.08 False None None False None False 112232.2432 0 3844894 146735 None code05 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 132.16 132.16 684.0 False None None False None False 90397.44 0 3844895 146735 None code06 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. Cum 3003.84 3003.84 89.4654 False None None False None False 268739.747136 0 3844896 146735 None code07 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates- Cum 6992.16 6992.16 78.19 False None None False None False 546716.9904 0 3844897 146735 None code08 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-P-15 Cum 7664.03 7664.03 227.16 False None None False None False 1740961.0548 0 3844898 146735 None code09 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- Cum 12063.74 12063.74 20.16 False None None False None False 243204.9984 0 3844899 146735 None code10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- Cum 8430.58 8430.58 97.31 False None None False None False 820379.7398 0 3844900 146735 None code11 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- Cum 11496.24 11496.24 20.19 False None None False None False 232109.0856 0 3844901 146735 None code12 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.- Cum 297.92 297.92 937.46 False None None False None False 279288.0832 0 3844902 146735 None code13 Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work. Cum 95.2 95.2 3203.29 False None None False None False 304953.208 0 3844903 146735 None code14 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)- Cum 7155.68 7155.68 40.05 False None None False None False 286584.984 0 3844904 146735 None code15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates- Cum 6992.16 6992.16 2.67 False None None False None False 18669.0672 0 3844905 146735 None code16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates--LOWER GROUND FLOOR Cum 13029.07 13029.07 61.07 False None None False None False 795685.3049 0 3844906 146735 None code17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates--UPPER GROUND FLOOR Cum 13029.07 13029.07 38.48 False None None False None False 501358.6136 0 3844907 146735 None code18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates--FIRST FLOOR (BALCONY LEVEL) Cum 13159.36 13159.36 36.17 False None None False None False 475974.0512 0 3844908 146735 None code19 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates--SECOND FLOOR Cum 13289.65 13289.65 27.45 False None None False None False 364800.8925 0 3844909 146735 None code20 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates--TERRACE FLOOR Cum 13419.94 13419.94 6.93 False None None False None False 93000.1842 0 3844910 146735 None code21 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.- Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates--TERRACE FLOOR Cum 12192.28 12192.28 11.66 False None None False None False 142161.9848 0 3844911 146735 None code22 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC LINTEL--LOWER GROUND FLOOR Cum 12262.66 12262.66 0.31 False None None False None False 3801.4246 0 3844912 146735 None code23 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC LINTEL--UPPER GROUND FLOOR Cum 12262.66 12262.66 7.61 False None None False None False 93318.8426 0 3844913 146735 None code24 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC LINTEL--FIRST FLOOR (BALCONY LEVEL) Cum 12385.28 12385.28 6.16 False None None False None False 76293.3248 0 3844914 146735 None code25 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC LINTEL--SECOND FLOOR Cum 12507.91 12507.91 4.4 False None None False None False 55034.804 0 3844915 146735 None code26 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC LINTEL--TERRACE FLOOR Cum 12630.54 12630.54 1.1 False None None False None False 13893.594 0 3844916 146735 None code27 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates-CILL CONCRETE-LOWER GROUND FLOOR Cum 10138.63 10138.63 0.31 False None None False None False 3142.9753 0 3844917 146735 None code28 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates-CILL CONCRETE-UPPER GROUND FLOOR Cum 10138.63 10138.63 3.81 False None None False None False 38628.1803 0 3844918 146735 None code29 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates-CILL CONCRETE-FIRST FLOOR (BALCONY LEVEL) Cum 10240.02 10240.02 3.08 False None None False None False 31539.2616 0 3844919 146735 None code30 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates-CILL CONCRETE-SECOND FLOOR Cum 10341.4 10341.4 2.2 False None None False None False 22751.08 0 3844920 146735 None code31 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates-CILL CONCRETE-TERRACE FLOOR Cum 10442.79 10442.79 0.55 False None None False None False 5743.5345 0 3844921 146735 None code32 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC STAIRCASE-LOWER GROUND FLOOR Cum 11496.24 11496.24 4.45 False None None False None False 51158.268 0 3844922 146735 None code33 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC STAIRCASE-UPPER GROUND FLOOR Cum 11496.24 11496.24 19.09 False None None False None False 219463.2216 0 3844923 146735 None code34 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC STAIRCASE-FIRST FLOOR(BALCONY LEVEL) Cum 11611.2 11611.2 9.34 False None None False None False 108448.608 0 3844924 146735 None code35 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC STAIRCASE-SECOND FLOOR Cum 11726.16 11726.16 4.45 False None None False None False 52181.412 0 3844925 146735 None code36 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC BEAM-LOWER GROUND FLOOR Cum 12262.66 12262.66 57.66 False None None False None False 707064.9756 0 3844926 146735 None code37 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC BEAM-UPPER GROUND FLOOR Cum 12262.66 12262.66 41.51 False None None False None False 509023.0166 0 3844927 146735 None code38 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC BEAM-FIRST FLOOR (BALCONY LEVEL) Cum 12385.28 12385.28 38.87 False None None False None False 481415.8336 0 3844928 146735 None code39 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC BEAM-SECOND FLOOR Cum 12507.91 12507.91 46.85 False None None False None False 585995.5835 0 3844929 146735 None code40 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC BEAM-TERRACE FLOOR Cum 12630.54 12630.54 4.06 False None None False None False 51279.9924 0 3844930 146735 None code41 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC SLAB-LOWER GROUND FLOOR Cum 11496.24 11496.24 89.6 False None None False None False 1030063.104 0 3844931 146735 None code42 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC SLAB--UPPER GROUND FLOOR Cum 11496.24 11496.24 63.55 False None None False None False 730586.052 0 3844932 146735 None code43 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC SLAB--FIRST FLOOR(BALCONY LEVEL) Cum 11611.2 11611.2 52.3 False None None False None False 607265.76 0 3844933 146735 None code44 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC SLAB--SECOND FLOOR Cum 11726.16 11726.16 11.89 False None None False None False 139424.0424 0 3844934 146735 None code45 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC SLAB--TERRACE FLOOR Cum 11841.13 11841.13 6.0 False None None False None False 71046.78 0 3844935 146735 None code46 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC CHAJJA-GROUND FLOOR Cum 11113.03 11113.03 4.22 False None None False None False 46896.9866 0 3844936 146735 None code47 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC CHAJJA-FIRST FLOOR(BALCONY LEVEL) Cum 11224.16 11224.16 2.53 False None None False None False 28397.1248 0 3844937 146735 None code48 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates-RCC CHAJJA-SECOND FLOOR Cum 11335.29 11335.29 3.85 False None None False None False 43640.8665 0 3844938 146735 None code49 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.-GROUND FLOOR Sqm 1386.56 1386.56 4.22 False None None False None False 5851.2832 0 3844939 146735 None code50 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.-FIRST FLOOR Sqm 1400.43 1400.43 2.53 False None None False None False 3543.0879 0 3844940 146735 None code51 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.-SECOND FLOOR Sqm 1414.29 1414.29 3.85 False None None False None False 5445.0165 0 3844941 146735 None code52 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a) Buildings- Tonne 100191.84 100191.84 125.19 False None None False None False 12543016.4496 0 3844942 146735 None code53 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.-UPPER GROUND Cum 2259.04 2259.04 63.88 False None None False None False 144307.4752 0 3844943 146735 None code54 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.-FIRST FLOOR(BALCONY LEVEL) Cum 2281.63 2281.63 32.2 False None None False None False 73468.486 0 3844944 146735 None code55 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.-SECOND FLOOR Cum 2304.22 2304.22 5.63 False None None False None False 12972.7586 0 3844945 146735 None code56 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates-UPPER GROUND Cum 6963.04 6963.04 23.95 False None None False None False 166764.808 0 3844946 146735 None code57 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates-FIRST FLOOR(BALCONY LEVEL) Cum 7032.67 7032.67 12.07 False None None False None False 84884.3269 0 3844947 146735 None code58 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates-SECOND FLOOR Cum 7102.3 7102.3 2.11 False None None False None False 14985.853 0 3844948 146735 None code59 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-UPPER GROUND Sqm 415.52 415.52 16.22 False None None False None False 6739.7344 0 3844949 146735 None code60 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-FIRST FLOOR(BALCONY LEVEL) Sqm 419.68 419.68 160.99 False None None False None False 67564.2832 0 3844950 146735 None code61 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.-SECOND FLOOR Sqm 423.83 423.83 28.17 False None None False None False 11939.2911 0 3844951 146735 None code62 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6.-LOWER GROUND FLOOR Cum 7565.6 7565.6 4.89 False None None False None False 36995.784 0 3844952 146735 None code63 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6.--UPPER GROUND FLOOR Cum 7565.6 7565.6 137.07 False None None False None False 1037016.792 0 3844953 146735 None code64 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6.--FIRST FLOOR(BALCONY LEVEL) Cum 7641.26 7641.26 104.95 False None None False None False 801950.237 0 3844954 146735 None code65 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6.--SECOND FLOOR Cum 7716.91 7716.91 104.95 False None None False None False 809889.7045 0 3844955 146735 None code66 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6.--TERRACE FLOOR Cum 7792.57 7792.57 20.87 False None None False None False 162630.9359 0 3844956 146735 None code67 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.GROUND FLOOR Sqm 1467.2 1467.2 63.9 False None None False None False 93754.08 0 3844957 146735 None code68 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.-FIRST FLOOR(BALCONY LEVEL) Sqm 1481.87 1481.87 63.9 False None None False None False 94691.493 0 3844958 146735 None code69 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.-SECOND FLOOR Sqm 1496.54 1496.54 41.4 False None None False None False 61956.756 0 3844959 146735 None code70 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.TERRACE FLOOR Sqm 1511.22 1511.22 30.9 False None None False None False 46696.698 0 3844960 146735 None code71 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.--GROUND FLOOR Sqm 1378.72 1378.72 38.82 False None None False None False 53521.9104 0 3844961 146735 None code72 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.-FIRST FLOOR (BALCONY LEVEL) Sqm 1392.51 1392.51 31.95 False None None False None False 44490.6945 0 3844962 146735 None code73 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.-SECOND FLOOR Sqm 1406.29 1406.29 23.52 False None None False None False 33075.9408 0 3844963 146735 None code74 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.-TERRACE FLOOR Sqm 1420.08 1420.08 23.52 False None None False None False 33400.2816 0 3844964 146735 None code75 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.--GROUND FLOOR Sqm 1236.48 1236.48 67.47 False None None False None False 83425.3056 0 3844965 146735 None code76 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.--FIRST FLOOR (BALCONY LEVEL) Sqm 1248.84 1248.84 50.13 False None None False None False 62604.3492 0 3844966 146735 None code77 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.--SECOND FLOOR Sqm 1261.21 1261.21 2.35 False None None False None False 2963.8435 0 3844967 146735 None code78 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.--TERRACE FLOOR Sqm 1273.57 1273.57 135.3 False None None False None False 172314.021 0 3844968 146735 None code79 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Sl.No 12.11, Page No.99, Volume- II, GROUND FLOOR. Cum 154642.88 154642.88 0.98 False None None False None False 151550.0224 0 3844969 146735 None code80 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications--LOWER GROUND FLOOR Cum 111552.0 111552.0 0.12 False None None False None False 13386.24 0 3844970 146735 None code81 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications--UPPER GROUND FLOOR Cum 111552.0 111552.0 1.15 False None None False None False 128284.8 0 3844971 146735 None code82 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications--FIRST FLOOR ( BALCONY LEVEL) Cum 112667.52 112667.52 1.15 False None None False None False 129567.648 0 3844972 146735 None code83 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications--SECOND FLOOR Cum 113783.04 113783.04 1.15 False None None False None False 130850.496 0 3844973 146735 None code84 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications--TERRACE FLOOR Cum 114898.56 114898.56 0.1 False None None False None False 11489.856 0 3844974 146735 None code85 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.UPPER GROUND FLOOR m 720.16 720.16 38.4 False None None False None False 27654.144 0 3844975 146735 None code86 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.FIRST FLOOR (BALCONY LEVEL) m 727.36 727.36 32.0 False None None False None False 23275.52 0 3844976 146735 None code87 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.-SECOND FLOOR m 734.56 734.56 6.4 False None None False None False 4701.184 0 3844977 146735 None code88 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-LOWER GROUND FLOOR Sqm 7542.08 7542.08 3.6 False None None False None False 27151.488 0 3844978 146735 None code89 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-UPPER GROUND FLOOR Sqm 7542.08 7542.08 93.42 False None None False None False 704581.1136 0 3844979 146735 None code90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-FIRST FLOOR (BALCONY LEVEL) Sqm 7617.5 7617.5 71.82 False None None False None False 547088.85 0 3844980 146735 None code91 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)-SECOND FLOOR Sqm 7692.92 7692.92 18.9 False None None False None False 145396.188 0 3844981 146735 None code92 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)TERRACE FLOOR Sqm 7768.34 7768.34 2.43 False None None False None False 18877.0662 0 3844982 146735 None code93 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)- -LOER GROUND Sqm 6405.28 6405.28 13.05 False None None False None False 83588.904 0 3844983 146735 None code94 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)- -UPPER GROUND FLOOR Sqm 6405.28 6405.28 13.05 False None None False None False 83588.904 0 3844984 146735 None code95 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)- -FIRST FLOOR (BALCONY LEVEL) Sqm 6469.33 6469.33 5.13 False None None False None False 33187.6629 0 3844985 146735 None code96 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)- SECOND FLOOR Sqm 6533.39 6533.39 2.97 False None None False None False 19404.1683 0 3844986 146735 None code97 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.-UPPER GROUND FLOOR Sqm 8906.24 8906.24 6.0 False None None False None False 53437.44 0 3844987 146735 None code98 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.\FIRST FLOOR(BALCONYLEVEL) Sqm 8995.3 8995.3 6.0 False None None False None False 53971.8 0 3844988 146735 None code99 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.SECOND FLOOR Sqm 9084.36 9084.36 6.0 False None None False None False 54506.16 0 3844989 146735 None code100 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) Sl. No. 12.20 Page No. 100, Volume-II -UPPER GROUND FLOOR Sqm 6888.0 6888.0 13.23 False None None False None False 91128.24 0 3844990 146735 None code101 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick both side commercial-LOWER GROUND FLOOR Sqm 3720.64 3720.64 2.57 False None None False None False 9562.0448 0 3844991 146735 None code102 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick both side commercial-UPPER GROUND FLOOR Sqm 3720.64 3720.64 24.82 False None None False None False 92346.2848 0 3844992 146735 None code103 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick both side commercialFIRST FLOOR (BALCONY LEVEL) Sqm 3757.85 3757.85 8.13 False None None False None False 30551.3205 0 3844993 146735 None code104 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick both side commercial-SECOND FLOOR Sqm 3795.05 3795.05 5.15 False None None False None False 19544.5075 0 3844994 146735 None code105 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-35 mm thick both side commercial-TERRACE FLOOR Sqm 3832.26 3832.26 2.94 False None None False None False 11266.8444 0 3844995 146735 None code106 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.- 30 mm thickness--UPPER GROUND FLOOR Sqm 3588.48 3588.48 9.68 False None None False None False 34736.4864 0 3844996 146735 None code107 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.- 30 mm thickness-FIRST FLOOR (BALCONY LEVEL) Sqm 3624.36 3624.36 9.68 False None None False None False 35083.8048 0 3844997 146735 None code108 Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.- 30 mm thickness-SECOND FLOOR Sqm 3660.25 3660.25 3.23 False None None False None False 11822.6075 0 3844998 146735 None code109 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-inCharge.TERRACE FLOOR Sqm 5165.82 5165.82 2.45 False None None False None False 12656.259 0 3844999 146735 None code110 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.-GROUND FLOOR Nos 1137.92 1137.92 9.0 False None None False None False 10241.28 0 3845000 146735 None code111 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.--SECOND FLOOR Nos 1149.3 1149.3 12.0 False None None False None False 13791.6 0 3845001 146735 None code112 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.-SECOND FLOOR Nos 1160.68 1160.68 11.0 False None None False None False 12767.48 0 3845002 146735 None code113 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.--TERRACE FLOOR Nos 1172.06 1172.06 1.0 False None None False None False 1172.06 0 3845003 146735 None code114 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 134.4 134.4 66.0 False None None False None False 8870.4 0 3845004 146735 None code115 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete- Nos 1178.24 1178.24 66.0 False None None False None False 77763.84 0 3845005 146735 None code116 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete- Nos 265.44 265.44 66.0 False None None False None False 17519.04 0 3845006 146735 None code117 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10mm, Nos 487.2 487.2 66.0 False None None False None False 32155.2 0 3845007 146735 None code118 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :-125x85x5.5mm.(heavy type) Sl.no-12.75.1, pg.no-107,volume-2. Nos 308.0 308.0 496.0 False None None False None False 152768.0 0 3845008 146735 None code119 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :-100x85x5.5mm.(heavy type) Sl.no-12.75.3, pg.no-107,volume-2. Nos 229.6 229.6 81.0 False None None False None False 18597.6 0 3845009 146735 None code120 Providing and fixing MS Hold fasts (SL. No 444,Page No.A-25, Basic Rate Rs. 50.00), volume-2. Each 56.0 56.0 198.0 False None None False None False 11088.0 0 3845010 146735 None code121 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms-SL.NO-12.64, PG.NO-105,VOLUME-2. Nos 61.6 61.6 60.0 False None None False None False 3696.0 0 3845011 146735 None code122 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding,-LOWER GROUND FLOOR Kg 188.16 188.16 64.8 False None None False None False 12192.768 0 3845012 146735 None code123 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding,-UPPER GROUND FLOOR Kg 188.16 188.16 1681.56 False None None False None False 316402.3296 0 3845013 146735 None code124 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding,-FIRST FLOOR (BALCONY LEVEL) Kg 190.04 190.04 1292.76 False None None False None False 245676.1104 0 3845014 146735 None code125 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding,-SECOND FLOOR Kg 191.92 191.92 340.2 False None None False None False 65291.184 0 3845015 146735 None code126 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding,-TERRACE FLOOR Kg 193.8 193.8 291.6 False None None False None False 56512.08 0 3845016 146735 None code127 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of EngineerIn-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.LOWER GROUND FLOOR Sqm 361.76 361.76 597.36 False None None False None False 216100.9536 0 3845017 146735 None code128 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerin-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.-UPPER GROUND FLOOR Sqm 361.76 361.76 732.36 False None None False None False 264938.5536 0 3845018 146735 None code129 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.-FIRST FLOOR (BALCONY LEVEL) Sqm 365.38 365.38 1056.1 False None None False None False 385877.818 0 3845019 146735 None code130 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.-SECOND FLOOR Sqm 369.0 369.0 402.5 False None None False None False 148522.5 0 3845020 146735 None code131 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.-TERRACE FLOOR Sqm 372.61 372.61 57.55 False None None False None False 21443.7055 0 3845021 146735 None code132 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.-LOWER GROUND FLOOR Sqm 361.76 361.76 119.47 False None None False None False 43219.4672 0 3845022 146735 None code133 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.-UPPER GROUND FLOOR Sqm 361.76 361.76 146.47 False None None False None False 52986.9872 0 3845023 146735 None code134 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.-FIRST FLOOR (BALCONY LEVEL) Sqm 365.38 365.38 211.22 False None None False None False 77175.5636 0 3845024 146735 None code135 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.-SECOND FLOOR Sqm 369.0 369.0 80.5 False None None False None False 29704.5 0 3845025 146735 None code136 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge.. Sl. No. 8.6.1, Page No. 42, Volume-2.-TERRACE FLOOR Sqm 372.61 372.61 11.51 False None None False None False 4288.7411 0 3845026 146735 None code137 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment-Plaster mesh 150mm wide-LOWER GROUND FLOOR Sqm 42.56 42.56 477.89 False None None False None False 20338.9984 0 3845027 146735 None code138 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment-Plaster mesh 150mm wide-UPPER GROUND FLOOR Sqm 42.56 42.56 585.89 False None None False None False 24935.4784 0 3845028 146735 None code139 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment-Plaster mesh 150mm wide-FIRST FLOOR (BALCONY LEVEL) Sqm 42.99 42.99 844.88 False None None False None False 36321.3912 0 3845029 146735 None code140 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment-Plaster mesh 150mm wide-SECOND FLOOR Sqm 43.41 43.41 322.0 False None None False None False 13978.02 0 3845030 146735 None code141 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment-Plaster mesh 150mm wide-TERRACE FLOOR Sqm 43.84 43.84 46.04 False None None False None False 2018.3936 0 3845031 146735 None code142 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.7, Page No.42, Volume-2.-LOWER GROUND FLOOR Sqm 409.92 409.92 493.63 False None None False None False 202348.8096 0 3845032 146735 None code143 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.7, Page No.42, Volume-2.UPPER GROUND FLOOR Sqm 409.92 409.92 994.67 False None None False None False 407735.1264 0 3845033 146735 None code144 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.7, Page No.42, Volume-2.-FIRST FLOOR (BALCONY LEVEL) Sqm 414.02 414.02 1008.36 False None None False None False 417481.2072 0 3845034 146735 None code145 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.7, Page No.42, Volume-2.-SECOND FLOOR Sqm 418.12 418.12 951.62 False None None False None False 397891.3544 0 3845035 146735 None code146 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.7, Page No.42, Volume-2.-TERRACE FLOOR Sqm 422.22 422.22 68.9 False None None False None False 29090.958 0 3845036 146735 None code147 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl.No. 8.2.1, Page No.41, Volume- 2.-UPPER GROUND FLOOR Sqm 330.4 330.4 156.84 False None None False None False 51819.936 0 3845037 146735 None code148 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl.No. 8.2.1, Page No.41, Volume- 2.-FIRST FLOOR (BALCONY LEVEL) Sqm 333.7 333.7 106.77 False None None False None False 35629.149 0 3845038 146735 None code149 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl.No. 8.2.1, Page No.41, Volume- 2.-SECOND FLOOR Sqm 337.01 337.01 16.08 False None None False None False 5419.1208 0 3845039 146735 None code150 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No. 8.9, Page No.42, Volume-2.-LOWER GROUND FLOOR Sqm 431.2 431.2 499.5 False None None False None False 215384.4 0 3845040 146735 None code151 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No. 8.9, Page No.42, Volume-2.-UPPER GROUND FLOOR Sqm 431.2 431.2 545.0 False None None False None False 235004.0 0 3845041 146735 None code152 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No. 8.9, Page No.42, Volume-2.FIRST FLOOR (BALCONY LEVEL) Sqm 435.51 435.51 548.5 False None None False None False 238877.235 0 3845042 146735 None code153 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No. 8.9, Page No.42, Volume-2.-SECOND FLOOR Sqm 439.82 439.82 514.2 False None None False None False 226155.444 0 3845043 146735 None code154 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No. 8.9, Page No.42, Volume-2.-TERRACE FLOOR Sqm 444.14 444.14 343.0 False None None False None False 152340.02 0 3845044 146735 None code155 Providing ruled pointing to coursed stone masonry with lime mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost all materials, labour, usage charges of machinery, curing complete as per specification.-GROUND FLOOR Sqm 334.88 334.88 121.0 False None None False None False 40520.48 0 3845045 146735 None code156 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates-Page 15, Sl. No.2.1.6, Volume-I-LOWER GROUND FLOOR Cum 6992.16 6992.16 69.5 False None None False None False 485955.12 0 3845046 146735 None code157 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.-GROUND FLOOR Sqm 3194.24 3194.24 666.43 False None None False None False 2128737.3632 0 3845047 146735 None code158 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.-FIRST FLOOR (BALCONY LEVEL) Sqm 3226.18 3226.18 287.91 False None None False None False 928849.4838 0 3845048 146735 None code159 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.SECOND FLOOR Sqm 3258.12 3258.12 134.79 False None None False None False 439161.9948 0 3845049 146735 None code160 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.LOWER GROUND FLOOR Sqm 5967.36 5967.36 30.69 False None None False None False 183138.2784 0 3845050 146735 None code161 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.-UPPER GROUND FLOOR Sqm 5967.36 5967.36 100.6 False None None False None False 600316.416 0 3845051 146735 None code162 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.-FIRST FLOOR (BALCONY LEVEL) Sqm 6027.03 6027.03 57.29 False None None False None False 345288.5487 0 3845052 146735 None code163 Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete-GROUND FLOOR Sqm 3762.08 3762.08 58.5 False None None False None False 220081.68 0 3845053 146735 None code164 Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete-FIRST FLOOR Sqm 3799.7 3799.7 45.0 False None None False None False 170986.5 0 3845054 146735 None code165 Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., completeSECOND FLOOR Sqm 3837.32 3837.32 45.0 False None None False None False 172679.4 0 3845055 146735 None code166 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete..-- Size of Tile 600x600 mm-LOWER GROUND FLOOR Sqm 1282.4 1282.4 6.36 False None None False None False 8156.064 0 3845056 146735 None code167 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete..-- Size of Tile 600x600 mm-UPPER GROUND FLOOR Sqm 1282.4 1282.4 60.34 False None None False None False 77380.016 0 3845057 146735 None code168 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete..-- Size of Tile 600x600 mm-FIRST FLOOR (BALCONY LEVEL) Sqm 1295.22 1295.22 35.1 False None None False None False 45462.222 0 3845058 146735 None code169 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete..-- Size of Tile 600x600 mmSECOND FLOOR Sqm 1308.05 1308.05 66.15 False None None False None False 86527.5075 0 3845059 146735 None code170 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. Sl.No 10.14, Page No.71, Volume-2.-UPPER GROUND FLOOR Sqm 1238.72 1238.72 156.84 False None None False None False 194280.8448 0 3845060 146735 None code171 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. Sl.No 10.14, Page No.71, Volume-2.-FIRST FLOOR Sqm 1251.11 1251.11 106.77 False None None False None False 133581.0147 0 3845061 146735 None code172 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. Sl.No 10.14, Page No.71, Volume-2.-SECOND FLOOR Sqm 1263.49 1263.49 16.08 False None None False None False 20316.9192 0 3845062 146735 None code173 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-UPPER GROUND FLOOR Sqm 1205.12 1205.12 19.34 False None None False None False 23307.0208 0 3845063 146735 None code174 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-FIRST FLOOR (BALCONY LEVEL) Sqm 1217.17 1217.17 22.74 False None None False None False 27678.4458 0 3845064 146735 None code175 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.-SECOND FLOOR Sqm 1229.22 1229.22 3.47 False None None False None False 4265.3934 0 3845065 146735 None code176 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications.-UPPER GROUND FLOOR Sqm 4792.48 4792.48 10.1 False None None False None False 48404.048 0 3845066 146735 None code177 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications.-FIRST FLOOR (BALCONY LEVEL) Sqm 4840.4 4840.4 7.56 False None None False None False 36593.424 0 3845067 146735 None code178 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications.-SECOND FLOOR Sqm 4888.33 4888.33 1.2 False None None False None False 5865.996 0 3845068 146735 None code179 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sl.No 8.51, Page No.50, Volume-2..-UPPER GROUND FLOOR Sqm 112.0 112.0 1434.62 False None None False None False 160677.44 0 3845069 146735 None code180 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sl.No 8.51, Page No.50, Volume-2..-GROUND FLOOR Sqm 112.0 112.0 1873.5 False None None False None False 209832.0 0 3845070 146735 None code181 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sl.No 8.51, Page No.50, Volume-2..-FIRST FLOOR Sqm 113.12 113.12 2275.68 False None None False None False 257424.9216 0 3845071 146735 None code182 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sl.No 8.51, Page No.50, Volume-2..-SECOND FLOOR Sqm 114.24 114.24 1434.62 False None None False None False 163890.9888 0 3845072 146735 None code183 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sl.No 8.51, Page No.50, Volume-2..-TERRACE FLOOR Sqm 115.36 115.36 137.96 False None None False None False 15915.0656 0 3845073 146735 None code184 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sl.No 8.33.1, Page No.46, Volume-2.-UPPER GROUND FLOOR Sqm 176.96 176.96 402.5 False None None False None False 71226.4 0 3845074 146735 None code185 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sl.No 8.33.1, Page No.46, Volume-2.-GROUND FLOOR Sqm 176.96 176.96 732.36 False None None False None False 129598.4256 0 3845075 146735 None code186 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sl.No 8.33.1, Page No.46, Volume-2.-FIRST FLOOR Sqm 178.73 178.73 1056.1 False None None False None False 188756.753 0 3845076 146735 None code187 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sl.No 8.33.1, Page No.46, Volume-2.-SECOND FLOOR Sqm 180.5 180.5 402.5 False None None False None False 72651.25 0 3845077 146735 None code188 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Specialprimer applied @ 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.Sl.No 8.33.1, Page No.46, Volume-2.-TERRACE FLOOR Sqm 182.27 182.27 57.55 False None None False None False 10489.6385 0 3845078 146735 None code189 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)-UPPER GROUND FLOOR Sqm 176.96 176.96 951.62 False None None False None False 168398.6752 0 3845079 146735 None code190 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)-GROUND FLOOR Sqm 176.96 176.96 994.67 False None None False None False 176016.8032 0 3845080 146735 None code191 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)-FIRST FLOOR Sqm 178.73 178.73 1008.36 False None None False None False 180224.1828 0 3845081 146735 None code192 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)-SECOND FLOOR Sqm 180.5 180.5 951.62 False None None False None False 171767.41 0 3845082 146735 None code193 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life)-TERRACE FLOOR Sqm 182.27 182.27 68.9 False None None False None False 12558.403 0 3845083 146735 None code194 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-UPPER GROUND FLOOR Sqm 316.96 316.96 77.13 False None None False None False 24447.1248 0 3845084 146735 None code195 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-GROUND FLOOR Sqm 316.96 316.96 81.75 False None None False None False 25911.48 0 3845085 146735 None code196 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-FIRST FLOOR Sqm 320.13 320.13 82.28 False None None False None False 26340.2964 0 3845086 146735 None code197 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-SECOND FLOOR Sqm 323.3 323.3 77.13 False None None False None False 24936.129 0 3845087 146735 None code198 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.-TERRACE FLOOR Sqm 326.47 326.47 34.3 False None None False None False 11197.921 0 3845088 146735 None code199 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.30, Page No.46, Volume-2.-UPPER GROUND FLOOR Sqm 194.88 194.88 411.36 False None None False None False 80165.8368 0 3845089 146735 None code200 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.30, Page No.46, Volume-2.-GROUND FLOOR Sqm 194.88 194.88 436.0 False None None False None False 84967.68 0 3845090 146735 None code201 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.30, Page No.46, Volume-2.-FIRST FLOOR Sqm 196.83 196.83 438.8 False None None False None False 86369.004 0 3845091 146735 None code202 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.30, Page No.46, Volume-2.-SECOND FLOOR Sqm 198.78 198.78 411.36 False None None False None False 81770.1408 0 3845092 146735 None code203 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.30, Page No.46, Volume-2.-TERRACE FLOOR Sqm 200.73 200.73 274.4 False None None False None False 55080.312 0 3845093 146735 None code204 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.41,Page No.48, Volume-2.-LOWER GROUND FLOOR Sqm 187.04 187.04 7.2 False None None False None False 1346.688 0 3845094 146735 None code205 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.41,Page No.48, Volume-2.-GROUND FLOOR Sqm 187.04 187.04 186.84 False None None False None False 34946.5536 0 3845095 146735 None code206 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.41,Page No.48, Volume-2.-FIRST FLOOR Sqm 188.91 188.91 143.64 False None None False None False 27135.0324 0 3845096 146735 None code207 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.41,Page No.48, Volume-2.-SECOND FLOOR Sqm 190.78 190.78 37.8 False None None False None False 7211.484 0 3845097 146735 None code208 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sl.No 8.41,Page No.48, Volume-2.-TERRACE FLOOR Sqm 192.65 192.65 6.08 False None None False None False 1171.312 0 3845098 146735 None code209 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge.Sl.No 8.55.1, Page No.50, Volume-2.-LOWER GROUND FLOOR Sqm 62.72 62.72 6.43 False None None False None False 403.2896 0 3845099 146735 None code210 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge.Sl.No 8.55.1, Page No.50, Volume-2.-GROUND FLOOR Sqm 62.72 62.72 95.12 False None None False None False 5965.9264 0 3845100 146735 None code211 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge.Sl.No 8.55.1, Page No.50, Volume-2.-FIRST FLOOR Sqm 63.35 63.35 20.34 False None None False None False 1288.539 0 3845101 146735 None code212 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge.Sl.No 8.55.1, Page No.50, Volume-2.-SECOND FLOOR Sqm 63.97 63.97 20.21 False None None False None False 1292.8337 0 3845102 146735 None code213 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.sl.no-8.47, pg.no-49,volume-2.-GROUND FLOOR Sqm 151.2 151.2 95.12 False None None False None False 14382.144 0 3845103 146735 None code214 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.sl.no-8.47, pg.no-49,volume-2.-FIRST FLOOR Sqm 152.71 152.71 20.34 False None None False None False 3106.1214 0 3845104 146735 None code215 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.sl.no-8.47, pg.no-49,volume-2.-SECOND FLOOR Sqm 154.22 154.22 20.21 False None None False None False 3116.7862 0 3845105 146735 None code216 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Sl.No 11.28, Page No.85, Volume-2.-LOWER GROUND FLOOR Kg 632.8 632.8 7.56 False None None False None False 4783.968 0 3845106 146735 None code217 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Sl.No 11.28, Page No.85, Volume-2.-UPPER GROUND FLOOR Kg 632.8 632.8 214.2 False None None False None False 135545.76 0 3845107 146735 None code218 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Sl.No 11.28, Page No.85, Volume-2.-FIRST FLOOR (BALCONY LEVEL) Kg 639.13 639.13 212.04 False None None False None False 135521.1252 0 3845108 146735 None code219 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.Sl.No 11.28, Page No.85, Volume-2.-SECOND FLOOR Kg 645.46 645.46 45.36 False None None False None False 29278.0656 0 3845109 146735 None code220 Providing and fixing ion wall face unplasticised Rigid PVC rain water pipes confirming to IS :13592 Type A,including jointing with seal ring confirming to IS:5382,leaving 10mm gap for thermal expansion,(i) Single socketed pipes 100mm diameter.item no-13.48, volume-2. PG.NO-125. m 332.44 332.44 180.0 False None None False None False 59839.2 0 3845110 146735 None code221 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge Sqm 896.0 896.0 184.25 False None None False None False 165088.0 0 3845111 146735 None code222 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-- Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. Cum 7102.3 7102.3 36.32 False None None False None False 257955.536 0 3845112 146735 None code223 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification Sqm 915.04 915.04 396.0 False None None False None False 362355.84 0 3845113 146735 None code224 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 9269.12 9269.12 7.5 False None None False None False 69518.4 0 3845114 146735 None code225 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 602.59 602.59 562.46 False None None False None False 338932.7714 0 3845115 146735 None code226 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top cover- Sqm 450.88 450.88 562.46 False None None False None False 253601.9648 0 3845116 146735 None code227 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top cover m 1139.41 1139.41 26.04 False None None False None False 29670.2364 0 3845117 146735 None code228 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top cover m 478.47 478.47 52.08 False None None False None False 24918.7176 0 3845118 146735 None code229 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 154.44 154.44 5624.64 False None None False None False 868669.4016 0 3845119 146735 None code230 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Sqm 1743.79 1743.79 160.0 False None None False None False 279006.4 0 3845120 146735 None code231 PLUMBING AND SANITARY-Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Sl.No 14.1.1, Page No.131, Volume-II Nos 5470.08 5470.08 10.0 False None None False None False 54700.8 0 3845121 146735 None code232 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Sl.No 14.3.1, Page No.131, Volume-II Nos 6694.24 6694.24 5.0 False None None False None False 33471.2 0 3845122 146735 None code233 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. Sl.No 14.7A, Page No.133, Volume-II Nos 4615.52 4615.52 17.0 False None None False None False 78463.84 0 3845123 146735 None code234 Providing and fixing 100 mm sand cast Iron grating for gully trap. Sl.No 14.29, Page No.136, Volume-II. Nos 52.64 52.64 45.0 False None None False None False 2368.8 0 3845124 146735 None code235 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Sl.No 13.15, Page No.119, Volume-II Nos 812.0 812.0 50.0 False None None False None False 40600.0 0 3845125 146735 None code236 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. Sl.No 13.13, Page No.119, Volume-II Nos 947.52 947.52 50.0 False None None False None False 47376.0 0 3845126 146735 None code237 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-25 mm nominal bore Nos 614.88 614.88 3.0 False None None False None False 1844.64 0 3845127 146735 None code238 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-32 mm nominal bore Nos 669.76 669.76 3.0 False None None False None False 2009.28 0 3845128 146735 None code239 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-40 mm nominal bore Nos 786.24 786.24 3.0 False None None False None False 2358.72 0 3845129 146735 None code240 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-50 mm nominal bore Nos 957.6 957.6 3.0 False None None False None False 2872.8 0 3845130 146735 None code241 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-65 mm nominal bore Nos 1277.92 1277.92 3.0 False None None False None False 3833.76 0 3845131 146735 None code242 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) Sl.No 13.4, Page No.117, Volume-II-80 mm nominal bore Nos 2326.24 2326.24 2.0 False None None False None False 4652.48 0 3845132 146735 None code243 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Sl.No 14.31, Page No.136, Volume-II Nos 1368.64 1368.64 15.0 False None None False None False 20529.6 0 3845133 146735 None code244 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Sl.No 14.40.2, Page No.137, Volume-II Nos 555.52 555.52 15.0 False None None False None False 8332.8 0 3845134 146735 None code245 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 160mm dia., 6 kg/sqcm & class 3. Sl.No 10.1.9, PG.NO-113, VOLUME-5. m 692.16 692.16 110.0 False None None False None False 76137.6 0 3845135 146735 None code246 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3. Sl.No 10.1.7, PG.NO-113, VOLUME-5. m 460.32 460.32 169.0 False None None False None False 77794.08 0 3845136 146735 None code247 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 90mm dia., 6 kg/sqcm & class 3. Sl.No 10.1.6, PG.NO-113, VOLUME-5. m 329.28 329.28 185.0 False None None False None False 60916.8 0 3845137 146735 None code248 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall - 50 mm nominal dia Pipes. Sl.No 13.31.6, PG.NO-122, VOL-2. m 874.72 874.72 105.0 False None None False None False 91845.6 0 3845138 146735 None code249 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 32 mm dia. Sl.No 13.32.4, page-122, VOL-2. m 623.84 623.84 85.0 False None None False None False 53026.4 0 3845139 146735 None code250 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 25 mm dia. Sl.No 13.32.3, page-122, VOL-2. m 534.24 534.24 200.0 False None None False None False 106848.0 0 3845140 146735 None code251 Providing and fixing Chorinated Poly Venly Cloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc), For 20 mm dia. Sl.No 13.32.2, page-122, VOL-2. Nos 424.48 424.48 200.0 False None None False None False 84896.0 0 3845141 146735 None code252 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Sl.No 16.10,page-191, VOL-5. Nos 4744.32 4744.32 10.0 False None None False None False 47443.2 0 3845142 146735 None code253 KSRB 11-18-9.1 : Providing and fixing sand cast iron soil waste single equal junction of required degree with access door 100x100x100mm, including cost of materials, labour, testing complete as per specifications. Specification No. KBS 11.1.10, Nos 1044.96 1044.96 20.0 False None None False None False 20899.2 0 3845143 146735 None code254 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Sl.No 13.34, page-123, VOL-2. l 10.08 10.08 5000.0 False None None False None False 50400.0 0 3845144 146735 None code255 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc, complete. 5.00 HP/3.7KW, 25 STG. Nos 29568.0 29568.0 1.0 False None None False None False 29568.0 0 3845145 146735 None code256 INTERNAL WIRING -Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. and running before Concreting the Slab. The Conduit should be tied to the reenforcement Rods by using binding wires and the unused ways of Junction boxes should be covered using PVC End enclosures .run with 18 SWG GI finish wire wherever it is necessory-19/20mm Dia 2mm Thick m 61.0 61.0 1496.0 False None None False None False 91256.0 0 3845146 146735 None code257 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. and running before Concreting the Slab. The Conduit should be tied to the reenforcement Rods by using binding wires and the unused ways of Junction boxes should be covered using PVC End enclosures .run with 18 SWG GI finish wire wherever it is necessory-19/20mm Dia 2mm Thick-25mm dia 2mm Thick m 70.0 70.0 2059.0 False None None False None False 144130.0 0 3845147 146735 None code258 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. and running before Concreting the Slab. The Conduit should be tied to the reenforcement Rods by using binding wires and the unused ways of Junction boxes should be covered using PVC End enclosures .run with 18 SWG GI finish wire wherever it is necessory-19/20mm Dia 2mm Thick-32mm dia 2.5mm thick m 93.0 93.0 50.0 False None None False None False 4650.0 0 3845148 146735 None code259 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and plastering upto wall surface and .run with 18 SWG GI finish wire wherever it is necessory-19/20mm Dia 2mm Thick m 75.0 75.0 1100.0 False None None False None False 82500.0 0 3845149 146735 None code260 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and plastering upto wall surface and .run with 18 SWG GI finish wire wherever it is necessory-25mm dia 2mm Thick m 80.0 80.0 1100.0 False None None False None False 88000.0 0 3845150 146735 None code261 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and plastering upto wall surface and .run with 18 SWG GI finish wire wherever it is necessory-32mm dia 2.5mm thick m 105.0 105.0 60.0 False None None False None False 6300.0 0 3845151 146735 None code262 Supplying and fixing PVC/ Metal Conduit Deep Junction Boxes-19/20 mm Deep Junction Box Each 49.0 49.0 239.0 False None None False None False 11711.0 0 3845152 146735 None code263 Supplying and fixing PVC/ Metal Conduit Deep Junction Boxes-25 mm Deep Junction Box Each 51.0 51.0 87.0 False None None False None False 4437.0 0 3845153 146735 None code264 Supplying and fixing PVC/ Metal Conduit Deep Junction Boxes-32 mm deep Junction Box Each 69.0 69.0 30.0 False None None False None False 2070.0 0 3845154 146735 None code265 Supplying and fixing PVC Casing and capping on the wall or ceiling using materials like bend , screws at an interval 0f 300 mm etc-20 mm m 27.0 27.0 150.0 False None None False None False 4050.0 0 3845155 146735 None code266 Supplying and fixing PVC Casing and capping on the wall or ceiling using materials like bend , screws at an interval 0f 300 mm etc-25 mm m 28.0 28.0 150.0 False None None False None False 4200.0 0 3845156 146735 None code267 Supplying and fixing PVC Casing and capping on the wall or ceiling using materials like bend , screws at an interval 0f 300 mm etc-32 mm m 41.0 41.0 50.0 False None None False None False 2050.0 0 3845157 146735 None code268 Supplying PVC /GI flexible conduit pipe …. Mm dia fixing on surface cover inverted tapared wodden plugs or phill plugs or rawl plugs and clamped using heavy guage saddles in an interval of 300 mm using NF screws and on the eaiter end of the pipe terminated properly-20 mm m 25.0 25.0 200.0 False None None False None False 5000.0 0 3845158 146735 None code269 Supplying PVC /GI flexible conduit pipe …. Mm dia fixing on surface cover inverted tapared wodden plugs or phill plugs or rawl plugs and clamped using heavy guage saddles in an interval of 300 mm using NF screws and on the eaiter end of the pipe terminated properly-25 mm m 31.0 31.0 200.0 False None None False None False 6200.0 0 3845159 146735 None code270 Supply & Fixing of Metal fan box with round Hook Each 163.0 163.0 45.0 False None None False None False 7335.0 0 3845160 146735 None code271 Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet.-Make : KEI / Polycab/ Finolex-Short point upto 3 Mtd. From Tapping point to outlet via switch box. Point 251.0 251.0 115.0 False None None False None False 28865.0 0 3845161 146735 None code272 Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet.-Make : KEI / Polycab/ Finolex-Medium point above 3 Mts upto 6 Mts. From tapping point to outlet via switch box. Point 361.0 361.0 110.0 False None None False None False 39710.0 0 3845162 146735 None code273 Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet.-Make : KEI / Polycab/ Finolex-Long point above 6 Mts. Upto 10 Mts. From tapping of point to outlet via switch box. Point 542.0 542.0 85.0 False None None False None False 46070.0 0 3845163 146735 None code274 Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet.-Make : KEI / Polycab/ Finolex-Two outlet in a row above 3 Mts upto 6 Mts, from tapping point to outlet via switch box. Point 671.0 671.0 25.0 False None None False None False 16775.0 0 3845164 146735 None code275 Supplying and wiring adopting loop system in existing PVC conduit/casing capping, using copper FRLS PVC insulated multi strand 2 x 1.5 sq.mm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/pvc round block complete for each outlet.-Make : KEI / Polycab/ Finolex-Three outlet in a row, above 6 Mts. Upto 10 Mts. From tapping point to outlet via switch box. Point 979.0 979.0 32.0 False None None False None False 31328.0 0 3845165 146735 None code276 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-1.5 Sqmm m 26.0 26.0 2659.0 False None None False None False 69134.0 0 3845166 146735 None code277 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-2.5Sqmm m 40.0 40.0 3695.0 False None None False None False 147800.0 0 3845167 146735 None code278 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-4Sqmm m 59.0 59.0 2600.0 False None None False None False 153400.0 0 3845168 146735 None code279 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-10Sqmm m 157.0 157.0 300.0 False None None False None False 47100.0 0 3845169 146735 None code280 Wiring for Lighting/ Power Circuit using one of PVC insulated 1100V grade, multistrand Copper conductor 1C cable in open or Concealed system of Wiring-16Sqmm m 318.0 318.0 200.0 False None None False None False 63600.0 0 3845170 146735 None code281 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-Make : Anchor / Schneider / Legrand-1-3 way Each 123.0 123.0 35.0 False None None False None False 4305.0 0 3845171 146735 None code282 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-Make : Anchor / Schneider / Legrand-4-5 way Each 138.0 138.0 30.0 False None None False None False 4140.0 0 3845172 146735 None code283 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-Make : Anchor / Schneider / Legrand-6 way Each 212.0 212.0 18.0 False None None False None False 3816.0 0 3845173 146735 None code284 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-Make : Anchor / Schneider / Legrand-8 way Each 250.0 250.0 13.0 False None None False None False 3250.0 0 3845174 146735 None code285 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-Make : Anchor / Schneider / Legrand-12 way Each 325.0 325.0 8.0 False None None False None False 2600.0 0 3845175 146735 None code286 Supplying and Flush mounting Powder coated / galvanised metal box suitable for mounting modular switch plates . The Box should be firmly flush mounted after due groove cutting in brick / Stone / C.C wall-Make : Anchor / Schneider / Legrand-16 way Each 354.0 354.0 6.0 False None None False None False 2124.0 0 3845176 146735 None code287 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box1-3 way Each 152.0 152.0 35.0 False None None False None False 5320.0 0 3845177 146735 None code288 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-4-5 way Each 175.0 175.0 30.0 False None None False None False 5250.0 0 3845178 146735 None code289 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-6 way Each 244.0 244.0 18.0 False None None False None False 4392.0 0 3845179 146735 None code290 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-8 way Each 302.0 302.0 13.0 False None None False None False 3926.0 0 3845180 146735 None code291 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-10-12 way Each 363.0 363.0 12.0 False None None False None False 4356.0 0 3845181 146735 None code292 Supplying and fixing Superior Quality modular switch mounting poly carbonate plate with necessory supporting back plate with required no. of machine screws , bolts nuts etc. complte on existing metal / PVC box-16 way Each 403.0 403.0 10.0 False None None False None False 4030.0 0 3845182 146735 None code293 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -6 Amp one way Each 88.0 88.0 188.0 False None None False None False 16544.0 0 3845183 146735 None code294 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -6 Amps 2 way Each 152.0 152.0 12.0 False None None False None False 1824.0 0 3845184 146735 None code295 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -6 Amps socket Each 162.0 162.0 65.0 False None None False None False 10530.0 0 3845185 146735 None code296 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -Stepped Fan Regulator Each 313.0 313.0 45.0 False None None False None False 14085.0 0 3845186 146735 None code297 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -16 Amps 1 way switch Each 249.0 249.0 61.0 False None None False None False 15189.0 0 3845187 146735 None code298 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -6 Amps Bell Push Each 159.0 159.0 2.0 False None None False None False 318.0 0 3845188 146735 None code299 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -32 Amps DP Switch Each 375.0 375.0 55.0 False None None False None False 20625.0 0 3845189 146735 None code300 Supply and fixing of modular switch /socket /stepped electronic fan regulator/ dimmer telephone socket etc on existing modular switch plate -6/16 Amps universal socket Each 249.0 249.0 61.0 False None None False None False 15189.0 0 3845190 146735 None code301 Supply and fixing of -Led Light Fixture 2 feet - 9/10 W-Make : Panasonic/Phillips / Crompton Each 496.0 496.0 17.0 False None None False None False 8432.0 0 3845191 146735 None code302 Supply and fixing of -Led Light Fixture 4 feet - 20/22 W Each 740.0 740.0 61.0 False None None False None False 45140.0 0 3845192 146735 None code303 Supply of recess mounted rolling type LED square or round Light 12 watta Each 835.0 835.0 56.0 False None None False None False 46760.0 0 3845193 146735 None code304 Supply and fixing of -LED Modular Down Light 2' x 2 ' - 36 W Each 5651.0 5651.0 92.0 False None None False None False 519892.0 0 3845194 146735 None code305 Fabrication and supply of sheet steel enclosure out of 14 SWG CRCA Sheet duly powder coated the contro panel ( Size of 2000 x1500x 450 ) is of compartment alized, All the components are duly wired and connected to Aluminum bus bar.-Make : Legrand / Schneider / Anchor / L&T Sq CM 0.43 0.43 70000.0 False None None False None False 30100.0 0 3845195 146735 None code306 Supplying and fixing of 100 A 4 x 30 x 10 mm Alumunium Strips m 2214.0 2214.0 6.0 False None None False None False 13284.0 0 3845196 146735 None code307 Supplying and fixing of 400 A 4 x 50 x 10 mm Alumunium Strips m 3996.0 3996.0 6.0 False None None False None False 23976.0 0 3845197 146735 None code308 Supplying and fixing-16 sqmm wire m 318.0 318.0 40.0 False None None False None False 12720.0 0 3845198 146735 None code309 Supplying and fixing of LED Panel Board indicating Lamp with required colour Suitable for 220 V AC 50 HZ Each 464.0 464.0 9.0 False None None False None False 4176.0 0 3845199 146735 None code310 Supplying of Multifunction Digital Meter Each 8370.0 8370.0 1.0 False None None False None False 8370.0 0 3845200 146735 None code311 Supplying and fixing-250A ATS Each 102600.0 102600.0 1.0 False None None False None False 102600.0 0 3845201 146735 None code312 Supplying and fixing of 400 A MCCB Each 29092.0 29092.0 1.0 False None None False None False 29092.0 0 3845202 146735 None code313 Supplying and fixing of 200 A MCCB Each 21289.0 21289.0 1.0 False None None False None False 21289.0 0 3845203 146735 None code314 Supplying and fixing-63A 4P MCB Each 2399.0 2399.0 6.0 False None None False None False 14394.0 0 3845204 146735 None code315 Supplying and fixing-5 - 32 A TPN Nos 1777.0 1777.0 13.0 False None None False None False 23101.0 0 3845205 146735 None code316 Supplying and fixing of Earth leakage relay Each 8316.0 8316.0 1.0 False None None False None False 8316.0 0 3845206 146735 None code317 Supplying and fixing of 50 x 50 x 6 mm Angle m 356.0 356.0 20.0 False None None False None False 7120.0 0 3845207 146735 None code318 Fabrication and supply of sheet steel enclosure out of 14 SWG CRCA Sheet duly powder coated the contro panel ( Size of 2000 x1500x 450 ) is of compartment alized, All the components are duly wired and connected to Aluminum bus bar. Sq CM 0.43 0.43 35000.0 False None None False None False 15050.0 0 3845208 146735 None code319 Supplying and fixing of 100 A 4 x 30 x 10 mm Alumunium Strips m 2214.0 2214.0 6.0 False None None False None False 13284.0 0 3845209 146735 None code320 Supplying and fixing of LED Panel Board indicating Lamp with required colour Suitable for 220 V AC 50 HZ Each 464.0 464.0 15.0 False None None False None False 6960.0 0 3845210 146735 None code321 Supply , fixing and wiring of Automatic Poer Factor Controller Each 19440.0 19440.0 1.0 False None None False None False 19440.0 0 3845211 146735 None code322 Supplying and fixing of 40 - 63 Amps TPN MCB Each 2399.0 2399.0 1.0 False None None False None False 2399.0 0 3845212 146735 None code323 Supplying and fixing of 5 - 32 A TPN Nos 1777.0 1777.0 6.0 False None None False None False 10662.0 0 3845213 146735 None code324 Supplying and fixing of 25 Amps Each 1187.0 1187.0 6.0 False None None False None False 7122.0 0 3845214 146735 None code325 Supplying and fixing of Heavy Duty low Voltage Capacitors Kvar 432.0 432.0 30.0 False None None False None False 12960.0 0 3845215 146735 None code326 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting -Double Door-4Way SP &N Nos 1368.0 1368.0 1.0 False None None False None False 1368.0 0 3845216 146735 None code327 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting -Double Door-8Way SP &N Nos 1695.0 1695.0 1.0 False None None False None False 1695.0 0 3845217 146735 None code328 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting -Double Door-12Way SP &N Nos 2067.0 2067.0 1.0 False None None False None False 2067.0 0 3845218 146735 None code329 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting -Double Door-6Way TP &N Nos 3735.0 3735.0 1.0 False None None False None False 3735.0 0 3845219 146735 None code330 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting -Double Door-8Way TP &N Nos 4136.0 4136.0 2.0 False None None False None False 8272.0 0 3845220 146735 None code331 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting -Double Door-12Way TP &N Nos 5744.0 5744.0 3.0 False None None False None False 17232.0 0 3845221 146735 None code332 Supplying fixing & wiring earth leakage miniature circuit breaker (ELMCB) 240 / 450 V up to 300mA sensitivity on Existing / panel Board-16 - 25 Amps 2 pole Nos 2536.0 2536.0 3.0 False None None False None False 7608.0 0 3845222 146735 None code333 Supplying fixing & wiring earth leakage miniature circuit breaker (ELMCB) 240 / 450 V up to 300mA sensitivity on Existing / panel Board-32 - 40 Amps 2 pole Nos 2652.0 2652.0 10.0 False None None False None False 26520.0 0 3845223 146735 None code334 Supplying fixing & wiring earth leakage miniature circuit breaker (ELMCB) 240 / 450 V up to 300mA sensitivity on Existing / panel Board-32 - 40 Amps 4 pole Nos 2826.0 2826.0 2.0 False None None False None False 5652.0 0 3845224 146735 None code335 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-5 - 32 Amp SP Nos 523.0 523.0 70.0 False None None False None False 36610.0 0 3845225 146735 None code336 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-40 - 63 Amps SP Nos 726.0 726.0 4.0 False None None False None False 2904.0 0 3845226 146735 None code337 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-5 - 32 Amp DP Nos 1103.0 1103.0 6.0 False None None False None False 6618.0 0 3845227 146735 None code338 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-40 - 63 Amp DP Nos 1376.0 1376.0 6.0 False None None False None False 8256.0 0 3845228 146735 None code339 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-5 - 32 A TPN Nos 1777.0 1777.0 2.0 False None None False None False 3554.0 0 3845229 146735 None code340 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-40 - 63 Amp TPN Nos 2399.0 2399.0 6.0 False None None False None False 14394.0 0 3845230 146735 None code341 Supplying Fixing and Wiring earth electrode for grounding of lifts,Xmer, DG Sets etc using 40mm dia 2.9mm thick, 2.5mtr long GI pipe with GI funnel with mesh & suitable size reducer fixed on the top of Electrode. The funnel should be enclosed in a cc chamber of 400x400x400 with a cast iron cover. The Earth electrode shall have staggered holes of 12mm dia & electrode shoulde be covered 150mm around with alternate layers of salt & charcoal from the bottom of the CC Chamber. The connection from the electrode is to be established throgh GI strip using GI bolts & nuts. Nos 4150.0 4150.0 8.0 False None None False None False 33200.0 0 3845231 146735 None code342 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required….. 25 x 3 mm G.I strip.GI Strip m 75.0 75.0 100.0 False None None False None False 7500.0 0 3845232 146735 None code343 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required….. 600x600x3 GI Plate.GI Strip Each 760.0 760.0 2.0 False None None False None False 1520.0 0 3845233 146735 None code344 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required…..-25 x 3 mm -Cu. Strip m 505.0 505.0 50.0 False None None False None False 25250.0 0 3845234 146735 None code345 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required…..-600x600x3 Cu. Plate-Cu. Strip Each 6900.0 6900.0 2.0 False None None False None False 13800.0 0 3845235 146735 None code346 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required…-12 SWG GI wire-GI wire m 14.0 14.0 200.0 False None None False None False 2800.0 0 3845236 146735 None code347 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required-12 SWG m 58.0 58.0 50.0 False None None False None False 2900.0 0 3845237 146735 None code348 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required10 SWG m 68.0 68.0 50.0 False None None False None False 3400.0 0 3845238 146735 None code349 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required-8 SWG m 105.0 105.0 50.0 False None None False None False 5250.0 0 3845239 146735 None code350 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required-2C x 10sq.mm. Al. Alum. Cable m 95.0 95.0 200.0 False None None False None False 19000.0 0 3845240 146735 None code351 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required-4C x 10sq.mm. Al. Alum. Cable m 130.0 130.0 150.0 False None None False None False 19500.0 0 3845241 146735 None code352 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required-4C x 16sq.mm. Al. Alum. Cable m 150.0 150.0 100.0 False None None False None False 15000.0 0 3845242 146735 None code353 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required-3.5C x 120sq.mm. Al. Alum. Cable m 600.0 600.0 50.0 False None None False None False 30000.0 0 3845243 146735 None code354 Supplying & running of GI/Cu. Strips for grounding connections using necessary fixing material as required-3.5C x 240sq.mm. Al. Alum. Cable m 1130.0 1130.0 100.0 False None None False None False 113000.0 0 3845244 146735 None code355 Supply & Fixing of Heavy Duty Cable Glands Suitable For UG Cable of 1.1KV Class (metal Only)-25mm Dia Nos 84.0 84.0 30.0 False None None False None False 2520.0 0 3845245 146735 None code356 Supply & Fixing of Heavy Duty Cable Glands Suitable For UG Cable of 1.1KV Class (metal Only)-63mm Dia Nos 388.0 388.0 8.0 False None None False None False 3104.0 0 3845246 146735 None code357 Supplying Tinned Cu. Lugs & crimping & wiring to terminal Point for Wire of following sizes -16sq.mm. long Barrel Nos 12.44 12.44 18.0 False None None False None False 223.92 0 3845247 146735 None code358 Supplying Tinned Cu. Lugs & crimping & wiring to terminal Point for Wire of following sizes -240Sqmm Long Barrel Nos 463.0 463.0 6.0 False None None False None False 2778.0 0 3845248 146735 None code359 Supplying Tinned Cu. Lugs & crimping & wiring to terminal Point for Wire of following sizes -120 Sqmm Long Barrel Nos 190.0 190.0 50.0 False None None False None False 9500.0 0 3845249 146735 None code360 Supply & Fixing 2mm thick perforated cable tray with powder coated paint on exising MS Angle support using necessary GI bolts , nuts & washer or welding as required:-150 mmX 50 MM wide tray ( Perforated type ) m 425.0 425.0 20.0 False None None False None False 8500.0 0 3845250 146735 None code361 Supply & Fixing 2mm thick perforated cable tray with powder coated paint on exising MS Angle support using necessary GI bolts , nuts & washer or welding as required:-300 mm x 50 mm wide cabel tray ( Perforated type ) m 530.0 530.0 20.0 False None None False None False 10600.0 0 3845251 146735 None code362 Supplying exhaust fan 0f 1440 RPM of300 mm (12") size with bracket blades complte for light duty suitable to operate on 230V 50 Hz AC Supply-Make Fans : Crompton / Usha / Anchor Each 1542.0 1542.0 15.0 False None None False None False 23130.0 0 3845252 146735 None code363 Supplying capacitor type ceiling Fan complete with down rod blades shackle ,canopies etc. for operation on 230 Vots 50 cycles ,single phase AC supply confirming to ISS -374-1979 with double ball bearing system-48 " Sweep Economy model Each 2085.0 2085.0 35.0 False None None False None False 72975.0 0 3845253 146735 None code364 Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay and over load protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including battery operated cordless unit-4.0 TR Cassette 3 Ph Nos 141255.0 141255.0 10.0 False None None False None False 1412550.0 0 3845254 146735 None code365 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type Each 4981.0 4981.0 10.0 False None None False None False 49810.0 0 3845255 146735 None code366 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3core 80 stand copper wiring between indoor and outdoorunit Leak testing oil and gas charging for additional piping-Cassette m 1763.0 1763.0 250.0 False None None False None False 440750.0 0 3845256 146735 None code367 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3core 80 stand copper wiring between indoor and outdoorunit Leak testing oil and gas charging for additional piping4C x 4 sqmm Copper flexible cable m 158.0 158.0 300.0 False None None False None False 47400.0 0 3845257 146735 None code368 Supplying and installation of -5KVA offline UPS Nos 38661.0 38661.0 1.0 False None None False None False 38661.0 0 3845258 146735 None code369 Supplying and installation of -12V , 200 AH Capacity Acid Battery Nos 15783.0 15783.0 2.0 False None None False None False 31566.0 0 3845259 146735 None code370 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. andfixing using invetred wood plugs in Case of RCC ceiling and RCC wall /stone structure or rawl plug incase of brick walls and cement plastering the damaged portion using heavy guage saddles in an intervel of 700 mm using NF Screws-\19/20mm Dia 2mm Thick m 68.0 68.0 200.0 False None None False None False 13600.0 0 3845260 146735 None code371 Supplying heavy gauge PVC conduit pipe … mm dia confirming to IS 2509 with suitable size bends, metal / PVC junction boxes adhesive paste etc. andfixing using invetred wood plugs in Case of RCC ceiling and RCC wall /stone structure or rawl plug incase of brick walls and cement plastering the damaged portion using heavy guage saddles in an intervel of 700 mm using NF Screws-25mm dia 2mm Thick m 80.0 80.0 100.0 False None None False None False 8000.0 0 3845261 146735 None code372 Supplying and drawing pvc insulated gas injected physical foam jelly filled co axial TV Cable Rg6 m 42.0 42.0 200.0 False None None False None False 8400.0 0 3845262 146735 None code373 Supply & Fixing of 4 Pair Telephone wire m 33.0 33.0 200.0 False None None False None False 6600.0 0 3845263 146735 None code374 Supplying & drawing UTP Cat 6 E Lan Cable m 34.0 34.0 400.0 False None None False None False 13600.0 0 3845264 146735 None code375 Supply & Fixing of Single I/0 Each 405.0 405.0 10.0 False None None False None False 4050.0 0 3845265 146735 None code376 Supply & Fixing of Double I/O Each 727.0 727.0 15.0 False None None False None False 10905.0 0 3845266 146735 None code377 Supply & Fixing of T.V telephone Socket Each 147.0 147.0 20.0 False None None False None False 2940.0 0 3845267 146735 None code378 Supply & Fixing of 12U with 800 mm depth Each 9271.0 9271.0 1.0 False None None False None False 9271.0 0 3845268 146735 None code379 Supplying & Fixing of power Strip Each 1233.0 1233.0 1.0 False None None False None False 1233.0 0 3845269 146735 None code380 Supply & Fixing of 24 port 10 / 100 /1000 Switch Each 8241.0 8241.0 1.0 False None None False None False 8241.0 0 3845270 146735 None code381 Supply & Fixing of 1 Mtr patch cable Each 190.0 190.0 15.0 False None None False None False 2850.0 0 3845271 146735 None code382 Supply & Fixing of 2 Mtr patch cable Each 286.0 286.0 15.0 False None None False None False 4290.0 0 3845272 146735 None code383 Supply & Fixing of 24 port 10 / 100 patch panel Each 4258.0 4258.0 1.0 False None None False None False 4258.0 0 3845273 146735 None code384 Fabricating, supplying and erection of ...Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47m/sec for …….Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom …..mm, top….mm with 3/4mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the pole shall be galvanized with not less than 65micron etc as per ASTM-A 123 and 153 etc., (excluding foundation) as per drawing appended. a)3 Meters-Top 70mm and bottom 130mm dia Each 5671.0 5671.0 4.0 False None None False None False 22684.0 0 3845274 146735 None code385 Fabricating, supplying and erection of ...Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47m/sec for …….Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom …..mm, top….mm with 3/4mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the pole shall be galvanized with not less than 65micron etc as per ASTM-A 123 and 153 etc., (excluding foundation) as per drawing appended. b)5 Meters-Top 70mm and bottom 130mm dia Each 8871.0 8871.0 4.0 False None None False None False 35484.0 0 3845275 146735 None code386 Supplying and fixing Led Street Light70 watts Each 5955.0 5955.0 8.0 False None None False None False 47640.0 0 3845276 146735 None code387 Supplying and fixing 4C x 16sq.mm. Al. Alum. Cable m 150.0 150.0 150.0 False None None False None False 22500.0 0 3845277 146735 None code388 Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete m 102.0 102.0 120.0 False None None False None False 12240.0 0 3845278 146735 None code389 Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required.(69/5) - In exixting trench/duct. 6sqmm to 16 sqmm m 11.8 11.8 150.0 False None None False None False 1770.0 0 3845279 146735 None code390 Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable (Sl no 7.10 page no 62) m 100.0 100.0 150.0 False None None False None False 15000.0 0 3845280 146735 None code391 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 Sqmm Each 12.44 12.44 26.0 False None None False None False 323.44 0 3845281 146735 None code392 Supplying and fixing 25mm Dia Nos 80.0 80.0 100.0 False None None False None False 8000.0 0 3845282 146735 None code393 Supplying and fixing 70 Watt Led Flood light Nos 7390.0 7390.0 4.0 False None None False None False 29560.0 0 3845283 146735 None code394 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130- 1984 and (Virgin) PVC insulation and sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 & confirming to GTP of GROUP-A-4C x 2.5 sqmm m 141.0 141.0 200.0 False None None False None False 28200.0 0 3845284 146735 None code395 Supplying and fixing regular MCB distribution Boards on Wall / wood board /flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB single phase / 3 phase / single door with powder coated paiting -6Way TP &N Nos 3735.0 3735.0 1.0 False None None False None False 3735.0 0 3845285 146735 None code396 Supplying fixing & wiring earth leakage miniature circuit breaker (ELMCB) 240 / 450 V up to 300mA sensitivity on Existing / panel Board-16 - 25 Amps 2 pole Nos 2536.0 2536.0 3.0 False None None False None False 7608.0 0 3845286 146735 None code397 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-5 - 32 Amp SP Nos 523.0 523.0 4.0 False None None False None False 2092.0 0 3845287 146735 None code398 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-40 - 63 Amps SP Nos 726.0 726.0 4.0 False None None False None False 2904.0 0 3845288 146735 None code399 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-8W 0.5 Mtr Height Bollard Light Nos 3391.0 3391.0 8.0 False None None False None False 27128.0 0 3845289 146735 None code400 Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessory fixing materials & C type curve indicator ON OFF energy cross 3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898-LED Post Top Lantern with 25 Watt Nos 7173.0 7173.0 5.0 False None None False None False 35865.0 0 3845290 146735 None code401 Supply, installation, testing and commisioning of Flush mount model chairman unit with gooseneck mic with ring LED and intreconnection cable and out socket for linking next units with talk and priority switch with delegate inter face unit aliminum/ PVC Housing Nos 34800.0 34800.0 1.0 False None None False None False 34800.0 0 3845291 146735 None code402 Supply, installation, testing and commisioning of Flush mount model delegate unit with gooseneck mic with ring LED and intreconnection cable and out socket for linking next units with talk and priority switch with delegate inter face unit aliminum/ PVC Housing Nos 32800.0 32800.0 1.0 False None None False None False 32800.0 0 3845292 146735 None code403 Supply, installation, testing and commisioning of Table top model chairman unit with gooseneck mic with ring LED and intreconnection cable and out socket for linking next units with talk and priority switch with delegate inter face unit aliminum/ PVC Housing and Headphone socket Nos 12400.0 12400.0 1.0 False None None False None False 12400.0 0 3845293 146735 None code404 Supply, installation, testing and commisioning of Table top model delegate unit with gooseneck mic with ring LED and intreconnection cable and out socket for linking next units with talk and priority switch with delegate inter face unit aliminum/ PVC Housing and Headphone socket Nos 12400.0 12400.0 1.0 False None None False None False 12400.0 0 3845294 146735 None code405 Supply, installation, testing and commisioning of controller unit with 1 mic input 1aux PA out, rack mountable can handle up to 50 to 300 delegate units with expansion options Nos 174000.0 174000.0 1.0 False None None False None False 174000.0 0 3845295 146735 None code406 Supply, installation, testing and commisioning of controller unit with 1 mic input 1aux PA out, rack mountable can handle up to 60 delegate units with expansion options Nos 103.0 103.0 55.0 False None None False None False 5665.0 0 3845296 146735 None code407 Supply, installation, testing and commisioning of 9 core multistrand high gain low cable with required end connectors 10 meter to connect between the delegate units and controller including charges for labour, lead and lifts, loading and unloading Nos 220.0 220.0 5.0 False None None False None False 1100.0 0 3845297 146735 None code408 Supply, installation, testing and commisioning of compact ceiling speaker with Back Can Power handling up to 6 watt RMS/watt/100volt @ 1456 ohms single channel selectable taping 5'' LF driver and tweeter Nos 1450.0 1450.0 10.0 False None None False None False 14500.0 0 3845298 146735 None code409 Supplying, installing and commissioning of CCTV Surveillance System.-CCTV Surveillance Cameras-Indoor Dome IR Camera, HD Video Nos 6900.0 6900.0 12.0 False None None False None False 82800.0 0 3845299 146735 None code410 Outdoor Bullet- 25 Mtrs Range, HD Video Nos 7500.0 7500.0 2.0 False None None False None False 15000.0 0 3845300 146735 None code411 Power Supply 12VDC, Each Supports upto 5 IR Cameras Nos 3300.0 3300.0 5.0 False None None False None False 16500.0 0 3845301 146735 None code412 16 Channel DVR, HD, with 2TB Surveillance HDD Nos 57000.0 57000.0 1.0 False None None False None False 57000.0 0 3845302 146735 None code413 19 Color Monitor For DVR Nos 10440.0 10440.0 1.0 False None None False None False 10440.0 0 3845303 146735 None code414 CCTV Cabling including PVC Conduit m 114.0 114.0 700.0 False None None False None False 79800.0 0 3845304 146735 None code415 Supplying , Errection , Testing and Commissioning of Diesel Generator Set on existing CC platform comprising of Diesel Engine developing -----BHP @1500 RPM confirming to BS 5514-62.5 KVA /50 KW Nos 618585.0 618585.0 1.0 False None None False None False 618585.0 0 3845305 146735 None code416 Supply , Erection , Testing and commissioning of AMF Panel suitable for DG Set-up to 62.5 KVA Nos 75900.0 75900.0 1.0 False None None False None False 75900.0 0 3845306 146735 None code417 SUMP TANK-Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m- Cum 114.24 114.24 47.8 False None None False None False 5460.672 0 3845307 146735 None code418 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates- Cum 6992.16 6992.16 3.88 False None None False None False 27129.5808 0 3845308 146735 None code419 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.- Cum 297.92 297.92 2.3 False None None False None False 685.216 0 3845309 146735 None code420 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- FOOTING Cum 8277.29 8277.29 3.39 False None None False None False 28060.0131 0 3845310 146735 None code421 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- RCC WALL Cum 13029.07 13029.07 6.59 False None None False None False 85861.5713 0 3845311 146735 None code422 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- SLAB Cum 11496.24 11496.24 2.75 False None None False None False 31614.66 0 3845312 146735 None code423 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No. 8.9, Page No.42, Volume-2. Sqm 371.84 371.84 80.2 False None None False None False 29821.568 0 3845313 146735 None code424 KSRB 12-6.2: Providing 20mm round M.S. footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 12.4.6 Nos 286.72 286.72 10.0 False None None False None False 2867.2 0 3845314 146735 None code425 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) SL.NO-11.32, PG.NO-84, VOLUME-II. Tonne 88492.32 88492.32 1.27 False None None False None False 112385.2464 0 3845315 146735 None code426 SEPTIK TANK-Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m- Cum 114.24 114.24 47.8 False None None False None False 5460.672 0 3845316 146735 None code427 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)-Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates. sl.no-2.1.2, pg.no-15. volume-1 Cum 6992.16 6992.16 3.88 False None None False None False 27129.5808 0 3845317 146735 None code428 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.- Cum 297.92 297.92 2.3 False None None False None False 685.216 0 3845318 146735 None code429 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- FOOTING Cum 8277.29 8277.29 3.39 False None None False None False 28060.0131 0 3845319 146735 None code430 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- RCC WALL Cum 13029.07 13029.07 9.0 False None None False None False 117261.63 0 3845320 146735 None code431 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates- SLAB Cum 11496.24 11496.24 2.75 False None None False None False 31614.66 0 3845321 146735 None code432 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sl. No. 8.9, Page No.42, Volume-2. Sqm 371.84 371.84 83.3 False None None False None False 30974.272 0 3845322 146735 None code433 KSRB 12-6.2: Providing 20mm round M.S. footrest and fixing in manhole with M 10 cement concrete block of 20x20x10cms, using 20mm and down size metal of size including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 12.4.6 Nos 286.72 286.72 10.0 False None None False None False 2867.2 0 3845323 146735 None code434 Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) SL.NO-11.32, PG.NO-84, VOLUME-II. Tonne 88492.32 88492.32 1.51 False None None False None False 133623.4032 0 3845324 146735 None code435 BOREWELL-Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1)       Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a)     Above 20 M and upto 30 M - 15%, b)     Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2)   A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test etc. complete Nos 5922.56 5922.56 2.0 False None None False None False 11845.12 0 3845325 146735 None code436 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth)-Borewell depth of 0 to 50 Mtrs m 414.4 414.4 50.0 False None None False None False 20720.0 0 3845326 146735 None code437 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth)-Borewell depth of 50 to 100 Mtrs m 519.68 519.68 50.0 False None None False None False 25984.0 0 3845327 146735 None code438 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth)Borewell depth of 100 to 150 Mtrs m 552.16 552.16 50.0 False None None False None False 27608.0 0 3845328 146735 None code439 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth)-Borewell depth of 150 to 200 Mtrs m 640.64 640.64 25.0 False None None False None False 16016.0 0 3845329 146735 None code440 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth)--Borewell depth of 200 to 250 Mtrs m 751.52 751.52 60.0 False None None False None False 45091.2 0 3845330 146735 None code441 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete-5.00 HP/3.7KW-50 STG Nos 33208.0 33208.0 1.0 False None None False None False 33208.0 0 3845331 146735 None code442 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments-1x3x6 Sqm. m 207.2 207.2 168.0 False None None False None False 34809.6 0 3845332 146735 None code443 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments-Size 65 mm Nos 1736.0 1736.0 4.0 False None None False None False 6944.0 0 3845333 146735 None code444 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete.-3 to 6 HP pumps Each 11760.0 11760.0 1.0 False None None False None False 11760.0 0 3845334 146735 None code445 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments m 616.0 616.0 125.0 False None None False None False 77000.0 0 3845335 146735 None code446 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. Kvar 616.0 616.0 1.0 False None None False None False 616.0 0 3845336 146735 None code447 Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark Nos 5040.0 5040.0 1.0 False None None False None False 5040.0 0 3845337 146735 None code448 Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work. Job 1512.0 1512.0 1.0 False None None False None False 1512.0 0 3845338 146735 None code449 Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing of as per instructions of engineer incharge of work- 3.5 x 10 sqmm m 218.4 218.4 168.0 False None None False None False 36691.2 0 3845339 146735 None code450 Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. Job 4200.0 4200.0 1.0 False None None False None False 4200.0 0 3845340 146735 None code451 Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work.-3.5x10 Sqm Each 504.0 504.0 1.0 False None None False None False 504.0 0 3845341 146735 None code452 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.-5 HP, size 50x40 Head 46M, Discharge 174 LPM Each 29587.04 29587.04 1.0 False None None False None False 29587.04 0 3845342 146735 None code453 NON SR RATES-Providing and fixing Aluminium fixtures like aldrops of size 300x16mm,tower bolts of size 200 x 12mm, latches of size 250x12mm, 100mm length oxidized iron hinges,handles of size 150mm, door stoper and door brush of approved make and quality including cost oof conveyance of all meterials and as per the direction of EIC of work with all lead and lift and as directed by the engineer in charge of works.Single shutter Nos 4434.0 4434.0 3.0 False None None False None False 13302.0 0 3845343 146735 None code454 Providing and fixing sash mortise lock body with cylinder outside key and inside knob suitable for flush doors including cost of materials labours etc,. Complete as per specifications Nos 2150.0 2150.0 3.0 False None None False None False 6450.0 0 3845344 146735 None code455 Providing supplying and fixing ss satin finish barrel bolt/aldrop-300mm for door shutters including cost of materials,labour etc., complete as per specifications., Nos 575.0 575.0 6.0 False None None False None False 3450.0 0 3845345 146735 None code456 Providing supplying and fixing floor mounted door stopper suitable for flush door shutters including cost of materials,labour etc., complete as per specifications., Nos 550.0 550.0 6.0 False None None False None False 3300.0 0 3845346 146735 None code457 Providing supplying and fixing ss door handle set (22mm dia 300mm long ) including cost of materials,labour etc., complete as per specifications., Nos 1550.0 1550.0 6.0 False None None False None False 9300.0 0 3845347 146735 None code458 Providing supplying and fixing Hydraulic door closures with mounting heavy duty shuitable for flush door shutters including cost of materials,labour etc., complete as per specifications., Nos 1350.0 1350.0 20.0 False None None False None False 27000.0 0 3845348 146735 None code459 Providing supplying and fixing SS but hinges for fixing door shutter to frame for flush door shutters including cost of materials,labour etc., complete as per specifications., Nos 375.0 375.0 30.0 False None None False None False 11250.0 0 3845349 146735 None code460 Providing supplying and fixing SS screws-25mm for fixing door shutter to frame for flush door shutters including cost of materials,labour etc., complete as per specifications., Nos 4.0 4.0 180.0 False None None False None False 720.0 0 3845350 146735 None code461 Providing supplying and fixing MS Holdfast of size 260mm x 25mm x 5mm thk for fixing door frames to walls, including cost of materials cutting masonry pockets for receiving ms holdfasts one coat of shop primer,concrete filling of pockets,desposal of debries, including cost of materials,labour etc., complete as per specifications., Nos 45.0 45.0 24.0 False None None False None False 1080.0 0 3845351 146735 None code462 Supplying, installing, testing and commissioning approved make15 mm CP health faucet of approved make with necessary CP flexible hose 1.0m long nozzle, CP crutch,nozzle anguler stop cock with wall flange etc., complete.make: Jaguar,modle no. ALD-573 Nos 1307.0 1307.0 15.0 False None None False None False 19605.0 0 3845352 146735 None code463 Supplying, installing and testing Soap Dish including necessary fixing materials etc., complete. (Jal,Jaquar or equivalent) Nos 126.0 126.0 25.0 False None None False None False 3150.0 0 3845353 146735 None code464 Forming horizontal or vertical grooves on uniform size 10 mm wide and 7 mm deep at junction of wall and column / beam and finishing the grooves to elevation etc, including cost of materials , labour flor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incindental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge.per the instructions of the Engineer in charge. (All floors)-Front side Elevation m 31.0 31.0 1300.0 False None None False None False 40300.0 0 3845354 146735 None code465 Forming horizontal or vertical grooves on uniform size 10 mm wide and 7 mm deep at junction of wall and column / beam and finishing the grooves to elevation etc, including cost of materials , labour flor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incindental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge.per the instructions of the Engineer in charge. (All floors)-Front side Elevation m 31.0 31.0 300.0 False None None False None False 9300.0 0 3845355 146735 None code466 Forming horizontal or vertical grooves on uniform size 10 mm wide and 7 mm deep at junction of wall and column / beam and finishing the grooves to elevation etc, including cost of materials , labour flor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incindental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge.per the instructions of the Engineer in charge. (All floors)-top parapet wall m 31.0 31.0 600.0 False None None False None False 18600.0 0 3845356 146735 None code467 MOULDING : Providing 200 mm height architectural moulding with three stepswith 50mm on top and bottom and 100 mm middle champhered steps in standard architectural methods of execution running on thre edge of the slab, canopy and other places as shown in the drawings or as per the instructions given. the rate includes, materials, labour and complete.-elevation slope m 1800.0 1800.0 300.0 False None None False None False 540000.0 0 3845357 146735 None code468 Supplying fixing,testing, and commisioning of solar water heating system suitable/designed for "forced circulation" with solar panels hot water storage tank with supporting brackets etc complete. The solar water heater shall consists of the following Capacity : 200 LPD SS body solar panel with copper collectors SS body Bottom insulation of solar panel with 100 microns laminated with rock wool of 48kg/cum density Support structure made out of polyster powder coated CR tubes 1 No. Air release/vaccum release safty valve with a ball valve of 20mm dia. Uniform out put on continous usage. intel and outlet provision. Necessary interconnecting piping between panel to staorage tank etc. Nos 78000.0 78000.0 1.0 False None None False None False 78000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724400413000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1724400413000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724400413000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1724400413000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724400413000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1724400415000 0 None None ELIGIBILITY The tender document is part and parcel of the agreement. None 1724400418000 0 None None ELIGIBILITY The contractor shall obtain insurance coverage for all the workers deployed for this work. None 1724400423000 0 None None ELIGIBILITY Further details of the work or any clarifications can be obtained from the office of the Executive Engineer (Central office), KHB, Cauvery Bhavan, K.G. Road, Bangalore Ph: 080-22273511 ext-317, None 1724400426000 0 None None ELIGIBILITY The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any. None 1724400432000 0 None None ELIGIBILITY Corrigendum/modification/corrections, if any, will be published in the e procurement Web sites only. None 1724400435000 0 None None ELIGIBILITY KHB reserves the right to withdraw or cancel this invitation to BID/Tender without assigning any reason whatsoever None 1724400437000 0 None None ELIGIBILITY The bidder shall study the Tender document Carefully and quote the rates None 1724400440000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original and are to be produced to the Executive Engineer to verify the documents within 3 days from the day of opening of Technical bid for verification, if required. None 1724400443000 0 None None ELIGIBILITY Drawings uploaded are only for Tender Purpose only. None 1724400446000 0 None None ELIGIBILITY GST shall be added separately in the estimate. None 1724400449000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1724400452000 0 None None ELIGIBILITY The bidder should maintain register of laborers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. None 1724400455000 0 None None ELIGIBILITY The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KHB have the right to deduct the PF amount from the work bills and remit the same to respective PF offices. None 1724400459000 0 None None ELIGIBILITY The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time None 1724400463000 0 None None ELIGIBILITY The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Scanned Copy of documentary proof for having executed similar nature of work not less than 50% of tender amount as defined in Government order No.FD 480 EXP-12/2014,Bangalore dated:19.07.2014 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. None None None None As per Tender Documents KW-4 clause 3.3 key & critical equipments available. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- As per Tender Documents KW-4 clause 3.3 key & critical equipments available. None None None None Executed in any one Financial year, the minimum quantities of work as mentioned in tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Executed in any one Financial year, the minimum quantities of work as mentioned in tender document None None None None Required valid electrical license for executing similar nature of work as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Required valid electrical license for executing similar nature of work as per tender document None None None None The Tenderer should have executed similar water supply/sanitary engineering works as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- The Tenderer should have executed similar water supply/sanitary engineering works as per tender document None None None None Income Tax returns & PAN Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None GST Registration Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None To qualify for award of this contract , each tenderer in its name should have in the last five years achieved in at least two financial years a minimum financial turnover (In all classes of civil engineering construction works only) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Scanned copy of latest GST clearance certificate. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of latest GST clearance certificate. None None None None Scanned copy of Credit lines/ letter of credit /Bankers certificate for at least 20% of amount put to tender in the current financial year on the name of work put to tender. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Assessed Available Bid Capacity as per tender document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Assessed Available Bid Capacity as per tender document None None None None Covering letter. Others Covering letter. createdTs version createdDate modifiedDate documentName None None None None Others -- Covering letter.
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid Work done certificate True Technical Bid key and critical equipment LIST True Technical Bid Income Tax returns & PAN no. True Technical Bid Pre-qualification certificate issued by KHB True Technical Bid GST clearance certificate True Technical Bid Credit lines/ letter of credit/Bankers certificate True Technical Bid Assessed available tender capacity calculation True Technical Bid Electrical license True Technical Bid Work done certificate with quantities True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1724412019000 version 0 createdDate None modifiedDate None blockNumber CAUVERY BHAVAN 3RD FLOOR street None city Bengaluru state Karnataka pin 560009
tenderRecallDTO	None