createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724667637970 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 526478.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 09-09-2024 16:00:00 tenderQueryClose 02-09-2024 17:00:00 technicalBidOpen 11-09-2024 11:00:00 publishedDate 26-08-2024 17:31:46 publishedByPost NWKRTC_EE_HOFF_HUB publishedByUser KPE12336 - DIVAKAR SHIVAPPA YARAGOPPA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 02-09-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Divakar S Yaragoppa splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08362332383 mobileNumber 7760991690 tenderSupplierList None
tenderSchedule	createdTs 1724667638003 version 8 createdDate None modifiedDate None tenderNumber NWKRTC/2024-25/BD/WORK_INDENT25 title Reconstruction of ADM Block and Repair bay with its essential works at depot Karwar. description Reconstruction of ADM Block and Repair bay with its essential works at depot Karwar. category WORKS categoryText Works ecv 41900000.00 deptName North Western Karnataka Road Transport Corporation status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 6452 locationName North Western Karnataka Road Transport Corporation Head Office provisionalAmount 41900000.0 groupOverheadTotal 6801794.23 fileNumber NWKRTC/EE/HBL/DB(T)/362/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724667638000 0 None None Buildings ADM Block and Repair bay 31262926.98 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3856337 147464 None code01 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work (CSR 2023-24 Volume No.1 Page No.5 I.No. 1.4.1) In all kinds of soils Depth upto 1.5m Cum 284.59 284.59 998.23 False None None False None False 284086.2757 0 3856338 147464 None code02 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work (CSR 2023-24 Volume No.1 Page No.5 I.No. 1.4.2) In all kinds of soils Depth exceeding 1.5m, but not exceeding 3 m Cum 319.09 319.09 762.37 False None None False None False 243264.6433 0 3856339 147464 None code03 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications. (CSR23-24 V 1 /Page No 11/1.23 ) Cum 3003.84 3003.84 230.02 False None None False None False 690943.2768 0 3856340 147464 None code04 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m (CSR23-24 V 1 /Page No 7/1.9 ) Cum 297.92 297.92 1195.43 False None None False None False 356142.5056 0 3856341 147464 None code05 Construction of Embankment by approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.(CSR23-24 V 1 /Page No 7/1.8 ) Cum 530.88 530.88 2750.81 False None None False None False 1460350.0128 0 3856342 147464 None code06 Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:4:8( M7.5) Using 40 mm nominal size graded crushed coarse aggregate (CSR2023-24 Vol 1 page no 15/It no 2.1.2) Cum 6660.86 6660.86 270.82 False None None False None False 1803894.1052 0 3856343 147464 None code07 Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates SRP- 2023-24-vol 1/15/2.2.3 Cum 7674.67 7674.67 223.62 False None None False None False 1716209.7054 0 3856344 147464 None code08 Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates SRP- 2023-24-vol 1/15/2.2.3 Cum 12063.74 12063.74 25.68 False None None False None False 309796.8432 0 3856345 147464 None code09 Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates SRP- 2023-24-vol 1/15/2.2.3 Cum 7805.95 7805.95 83.28 False None None False None False 650079.516 0 3856346 147464 None code10 Providing and laying in Reinforced cement concrete for all Basement& surface level works, return walls, retaining walls, sunken floorsetc. The granite/trap/basalt crushed graded coarse aggregates andfine aggregates as per relevant IS Codes machine mixed with superplasticisers, laid in layers, well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, costof all materials of quality, labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as pertechnical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP -Volume 1 / 16/2.3.2 Cum 10886.4 10886.4 39.97 False None None False None False 435129.408 0 3856347 147464 None code11 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) For Columns. Cum 13029.07 13029.07 28.48 False None None False None False 371067.9136 0 3856348 147464 None code12 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) Cum 12262.66 12262.66 41.24 False None None False None False 505712.0984 0 3856349 147464 None code13 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) Cum 11496.24 11496.24 4.55 False None None False None False 52307.892 0 3856350 147464 None code14 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) Cum 11496.24 11496.24 74.17 False None None False None False 852676.1208 0 3856351 147464 None code15 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) Cum 7664.16 7664.16 46.03 False None None False None False 352781.2848 0 3856352 147464 None code16 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) Cum 11113.03 11113.03 3.22 False None None False None False 35783.9566 0 3856353 147464 None code17 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Vol No. 1 P.No. 18/ I. No. 2.11(a) Kg 100.19 100.19 51151.65 False None None False None False 5124883.8135 0 3856354 147464 None code18 Construction of un-reinforced cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per design, over a prepared sub base. The superplastisiser confirming to IS 9103-1999 Reaffirmed-2008 ,Coarse aggregates and Fine aggregate confirming to IS:383-2016, transported to site, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work). Spreading the concrete with shovels, rackers and compacted using needle, suitable plate vibrator and finished in a continuous operation including provision of separation membrane and Hessian cloth finishing to lines and grades complete including cost of all materials, labour, all lead & lift, loading charges as per specification & direction of Engineer - incharge of the work. (Groove cutting shall be paid seperately) (CSR2023-24/P-Vol-III (51/6.6) Cum 7586.88 7586.88 223.08 False None None False None False 1692481.1904 0 3856355 147464 None code19 Supplying, fitting and placing Mild steel reinforcement complete in sub structure as per drawing and technical specification (CSR 2023-24/P- Vol-I /18/2.12/a) Kg 82.56 82.56 9871.2 False None None False None False 814966.272 0 3856356 147464 None code20 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. (CSR2023-24/P No 163/ It no 4/Morth 602.6.3) Rmtr 78.4 78.4 297.0 False None None False None False 23284.8 0 3856357 147464 None code21 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6.. CSR 2023-24 - Vol-2 (9/5.7) Cum 7565.6 7565.6 164.81 False None None False None False 1246886.536 0 3856358 147464 None code22 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(CSR 2023-24 Vol 2 page no 14/It no 6.13) Sqm 1093.12 1093.12 40.82 False None None False None False 44621.1584 0 3856359 147464 None code23 Providing Honne wood wrought and putup for purlins, common rafter sand similar work including cost of materials, labour, usage charges complete as per specifications. SRP- Vol-2 (99/12.2) Cum 152622.4 152622.4 0.89 False None None False None False 135833.936 0 3856360 147464 None code24 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot ressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991.from manufacturer complete as per spcification. (CSR 2023-24/Vol-II /106/12.57.5) 35 mm thick one side teak and one side commercial Sqm 4364.64 4364.64 34.56 False None None False None False 150841.9584 0 3856361 147464 None code25 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. (CSR2023-24/Vol-II (105/12.54) Rmtr 356.16 356.16 51.0 False None None False None False 18164.16 0 3856362 147464 None code26 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. (CSR2023-24/Vol-II/104/12.55.2) with one side prelam. Sqm 2284.8 2284.8 15.75 False None None False None False 35985.6 0 3856363 147464 None code27 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.(CSR2023-24 Vol II Pg87/ I No 11.35.1.2) Kg 547.68 547.68 170.26 False None None False None False 93247.9968 0 3856364 147464 None code28 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame.The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mmX 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware & single point locking system with touch lock Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size - 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). SRP- Vol-II (110/12.86) Cum 6036.8 6036.8 71.37 False None None False None False 430846.416 0 3856365 147464 None code29 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge: Prelaminated particle board with decorative lamination on one side and balancing lamination on other side including cost of materials, labour, usage charges of machinery complete as per specifications.(CSR2023-24 Vol II Pg87/ I No 11.36.1) Sqm 1004.64 1004.64 18.54 False None None False None False 18626.0256 0 3856366 147464 None code30 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m) including cost of materials, labour, usage charges of machinery complete as per specifications.(csr2023-24-vol II P-89/11.37.1) Sqm 1106.56 1106.56 12.3 False None None False None False 13610.688 0 3856367 147464 None code31 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.SRP- Vol-II (83/11.28) Kg 632.8 632.8 441.0 False None None False None False 279064.8 0 3856368 147464 None code32 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.(Vol 2 page no 63/ item no 9.24) Sqm 3194.24 3194.24 238.88 False None None False None False 763040.0512 0 3856369 147464 None code33 Providing and laying Polished Glazed Vitrified tiles with thickness 10mm in floor with different sizes with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in allcolours and shade, laid with cement based high polymer modified quickset tile adhesive (water based) conforming to IS : 15477, in average 6 mmthickness, including grouting of joints (Payment for grouting of joints tobe made separately) Size of Tile 800x800 mm SRP-SRP- Vol-2 (62/9.22.3) Sqm 1653.12 1653.12 187.55 False None None False None False 310042.656 0 3856370 147464 None code34 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sand wiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on top sides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete. SRP - Vol.2/71/10.15.1) Sqm 4467.68 4467.68 54.25 False None None False None False 242371.64 0 3856371 147464 None code35 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge.( Vol 2 Page no 59/item no9.2) Sqm 896.0 896.0 96.8 False None None False None False 86732.8 0 3856372 147464 None code36 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.. SRP- Vol-2/60/9.10) Sqm 1238.72 1238.72 173.45 False None None False None False 214855.984 0 3856373 147464 None code37 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications..(Vol 2 Page no 65/It no 9.39) Sqm 1622.88 1622.88 95.58 False None None False None False 155114.8704 0 3856374 147464 None code38 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.(Page No. 44 Item No. 8.16a Sqm 1386.56 1386.56 27.75 False None None False None False 38477.04 0 3856375 147464 None code39 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Vol 2 page no 77/ item no 11.2) Kg 126.56 126.56 50184.0 False None None False None False 6351287.04 0 3856376 147464 None code40 Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.(Vol 2 page no 85/11.34A) Kg 188.16 188.16 1929.69 False None None False None False 363090.4704 0 3856377 147464 None code41 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Vol 2 page no 26/ It no 7.38) Sqm 636.16 636.16 1146.4 False None None False None False 729293.824 0 3856378 147464 None code42 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as perspecifications and as per directions of Engineer-in-charge. SRP- Vol-2/41/8.2.1 Sqm 330.4 330.4 695.54 False None None False None False 229806.416 0 3856379 147464 None code43 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-2/ 41/8.3.1 Sqm 396.48 396.48 764.09 False None None False None False 302946.4032 0 3856380 147464 None code44 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..(Vol 2 Page no 41/It no 8.1.1) Sqm 285.6 285.6 449.8 False None None False None False 128462.88 0 3856381 147464 None code45 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(Vol 2 Page no 50/It no 8.51) Sqm 112.0 112.0 1145.34 False None None False None False 128278.08 0 3856382 147464 None code46 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2/ 45/8.25) Sqm 153.44 153.44 1145.34 False None None False None False 175740.9696 0 3856383 147464 None code47 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2/46/8.30) Sqm 194.88 194.88 764.09 False None None False None False 148905.8592 0 3856384 147464 None code48 Providing PVC ringtite pipes conf corming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) PVC pipes 110mm dia., 6 kg (CSR2023-24/ Vol-V/113/10.1.7 ) Rmtr 460.32 460.32 140.8 False None None False None False 64813.056 0 3856385 147464 None code49 Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover (CSR2023-24-Vol 5 Page no191 / It no 16.8) No 5365.92 5365.92 10.0 False None None False None False 53659.2 0 3856386 147464 None code50 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) PVC pipes 160mm Dai (CSR2023-24/ Vol-V/113/10.1.9 Rmtr 692.16 692.16 50.0 False None None False None False 34608.0 0 3856387 147464 None code51 Providing and fixing chprinated poly venyl chloride (CPVC) pipes having thermal stability for hot and cool watwr supply incl all CPVC plain brass threaded fittings incl fixing the pipe with clamp at 1.00 mtr spacing. This incl jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete (internal work exposed on wall) specification (CSR2023-24/Vol II/122/13.31.3) 25 mm dia Rmtr 356.16 356.16 100.0 False None None False None False 35616.0 0 3856388 147464 None code52 Providing and fixing chprinated poly venyl chloride (CPVC) pipes having thermal stability for hot and cool watwr supply incl all CPVC plain brass threaded fittings incl fixing the pipe with clamp at 1.00 mtr spacing. This incl jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete (internal work exposed on wall) specification. (CSR2023-24/ Vol II/122/13.31.2 ) 20 mm dia Rmtr 271.04 271.04 60.0 False None None False None False 16262.4 0 3856389 147464 None code53 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.SRP- Vol-II (131/14.3.1) No 6694.24 6694.24 4.0 False None None False None False 26776.96 0 3856390 147464 None code54 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm withintegral type foot rests CSR 2023-24 Vol II (SRP 131/14.1.1) No 5470.08 5470.08 6.0 False None None False None False 32820.48 0 3856391 147464 None code55 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (CSR 2023-24 Vol 2 Page no 132/It no 14.7.1) No 3451.84 3451.84 4.0 False None None False None False 13807.36 0 3856392 147464 None code56 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. (CSR2023-24/Vol.2/ 127/ 13.59) No 246.4 246.4 6.0 False None None False None False 1478.4 0 3856393 147464 None code57 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval Shape 450 X350 mm (Outer dimension) (CSR2023-24/Vol-II /128/14.32.2) No 1140.16 1140.16 4.0 False None None False None False 4560.64 0 3856394 147464 None code58 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g.(Vol 2 Page no 130/ It no 14.40.1) No 535.36 535.36 4.0 False None None False None False 2141.44 0 3856395 147464 None code59 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern (CSR2023-24/Vol II/SRP 132/14.5.1) No 9679.04 9679.04 4.0 False None None False None False 38716.16 0 3856396 147464 None code60 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (CSR2023-24/ Vol-II /123/13.34) Ltr 10.08 10.08 5000.0 False None None False None False 50400.0 0 3856397 147464 None code61 Providing and fixing chprinated poly venyl chloride (CPVC) pipes having thermal stability for hot and cool watwr supply incl all CPVC plain brass threaded fittings incl fixing the pipe with clamp at 1.00 mtr spacing. This incl jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete (internal work exposed on wall) specification (CSR2023-24/Vol II/122/13.31.5 ) 40 mm dia Rmtr 600.32 600.32 150.0 False None None False None False 90048.0 0 3856398 147464 None code62 Providing and fixing chprinated poly venyl chloride (CPVC) pipes having thermal stability for hot and cool watwr supply incl all CPVC plain brass threaded fittings incl fixing the pipe with clamp at 1.00 mtr spacing. This incl jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete (internal work ) specification (CSR2023-24/ Vol II/122/13.31.1. 15 mm dia Rmtr 203.84 203.84 50.0 False None None False None False 10192.0 0 3856399 147464 None code63 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore (CSR2023-24/ Vol-II /117/13.5.1) No 331.52 331.52 4.0 False None None False None False 1326.08 0 3856400 147464 None code64 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore (CSR2023-24/ Vol-II 117/13.4.3) No 786.24 786.24 2.0 False None None False None False 1572.48 0 3856401 147464 None code65 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore (CSR2023-24/ Vol-II /117/13.3.1) No 334.88 334.88 10.0 False None None False None False 3348.8 0 3856402 147464 None code66 Providing and fixing Chorinated PolyVenyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 50mm nominal OD pipes. (CSR2023-24/P122/Vol.2/13.31.6) Rmtr 874.72 874.72 80.0 False None None False None False 69977.6 0 3856403 147464 None code67 Laying Cement Concrete Pipe NP3 (burried conduits) of 500mm dia on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets (CSR 2023-24 Vol 3 P-147 / 16.17) Rmtr 2903.04 2903.04 25.0 False None None False None False 72576.0 0 3856404 147464 None code68 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.(CSR 2023-24/Vol 2 Page no 54 / It no 8.79) Rmtr 58.24 58.24 450.0 False None None False None False 26208.0 0 1724667638000 0 None None Buildings Security and Traffic Building 2014440.53 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3856405 147465 None code01 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work (CSR 2023-24 Volume No.1 Page No.5 I.No. 1.4.1) In all kinds of soils Depth upto 1.5m Cum 284.59 284.59 58.71 False None None False None False 16708.2789 0 3856406 147465 None code02 Construction of Embankment by approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required to complete the work.(CSR23-24 V 1 /Page No 7/1.8 ) Cum 583.97 583.97 57.49 False None None False None False 33572.4353 0 3856407 147465 None code03 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications. (CSR23-24 V 1 /Page No 11/1.23 ) Cum 3003.84 3003.84 6.27 False None None False None False 18834.0768 0 3856408 147465 None code04 Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:4:8 ( M7.5) Using 40 mm nominal size graded crushed coarse aggregate (CSR2023-24 Vol 1 page no 15/It no 2.1.2) Cum 6343.68 6343.68 13.66 False None None False None False 86654.6688 0 3856409 147465 None code05 Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates SRP- 2023-24-vol 1/15/2.2.3 Cum 7309.21 7309.21 11.54 False None None False None False 84348.2834 0 3856410 147465 None code06 Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates SRP- 2023-24-vol 1/15/2.2.3 Cum 12063.74 12063.74 1.49 False None None False None False 17974.9726 0 3856411 147465 None code07 Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates SRP- 2023-24-vol 1/15/2.2.3 Cum 7805.95 7805.95 9.18 False None None False None False 71658.621 0 3856412 147465 None code08 Providing and laying in Reinforced cement concrete for all Basement& surface level works, return walls, retaining walls, sunken floorsetc. The granite/trap/basalt crushed graded coarse aggregates andfine aggregates as per relevant IS Codes machine mixed with superplasticisers, laid in layers, well compacted using needle vibrators,providing weep holes wherever necesary, including all lead & lifts, costof all materials of quality, labour, Usage charges of machinery, curingand all other appurtenances required to complete the work as pertechnical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SRP -Volume 1 / 16/2.3.2 Cum 10886.4 10886.4 3.52 False None None False None False 38320.128 0 3856413 147465 None code09 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) For Columns. Cum 13029.07 13029.07 2.61 False None None False None False 34005.8727 0 3856414 147465 None code10 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) Cum 12262.66 12262.66 5.89 False None None False None False 72227.0674 0 3856415 147465 None code11 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) Cum 11496.24 11496.24 4.15 False None None False None False 47709.396 0 3856416 147465 None code12 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) Cum 11496.24 11496.24 7.68 False None None False None False 88291.1232 0 3856417 147465 None code13 Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- Vol 1(16/2.5.2) Cum 11113.03 11113.03 0.6 False None None False None False 6667.818 0 3856418 147465 None code14 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Vol No. 1 P 17/2.5.2) Cum 7664.16 7664.16 4.75 False None None False None False 36404.76 0 3856419 147465 None code15 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Vol No. 1 P.No. 18/ I. No. 2.11(a) Kg 100.19 100.19 4558.0 False None None False None False 456666.02 0 3856420 147465 None code16 Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.(Vol 2 page no 85/11.34A) Kg 188.16 188.16 521.51 False None None False None False 98127.3216 0 3856421 147465 None code17 Providing Honne wood wrought and putup for purlins, common rafter sand similar work including cost of materials, labour, usage charges complete as per specifications. SRP- Vol-2 (99/12.2) Cum 152622.4 152622.4 0.17 False None None False None False 25945.808 0 3856422 147465 None code18 Providing and fixing flush door shutter made out of solid core block board type, well seasoned, chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot ressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991.from manufacturer complete as per spcification. (CSR 2023-24/Vol-II /106/12.57.5) 35 mm thick one side teak and one side commercial Sqm 4364.64 4364.64 4.41 False None None False None False 19248.0624 0 3856423 147465 None code19 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame.The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mmX 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware & single point locking system with touch lock Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size - 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made). SRP- Vol-II (110/12.86) Sqm 6036.8 6036.8 12.6 False None None False None False 76063.68 0 3856424 147465 None code20 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6.. CSR 2023-24 - Vol-2 (9/5.7) Cum 7565.6 7565.6 20.38 False None None False None False 154186.928 0 3856425 147465 None code21 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as perspecifications and as per directions of Engineer-in-charge. SRP- Vol-2/41/8.2.1 Sqm 330.4 330.4 127.04 False None None False None False 41974.016 0 3856426 147465 None code22 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-2/ 41/8.3.1 Sqm 396.48 396.48 200.1 False None None False None False 79335.648 0 3856427 147465 None code23 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..(Vol 2 Page no 41/It no 8.1.1) Sqm 285.6 285.6 58.76 False None None False None False 16781.856 0 3856428 147465 None code24 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(Vol 2 Page no 50/It no 8.51) Sqm 112.0 112.0 185.8 False None None False None False 20809.6 0 3856429 147465 None code25 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.(Page No. 44 Item No. 8.16a Sqm 1386.56 1386.56 10.73 False None None False None False 14877.7888 0 3856430 147465 None code26 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.SRP- Vol-II (85/11.28) Kg 632.8 632.8 183.6 False None None False None False 116182.08 0 3856431 147465 None code27 Providing and laying Polished Glazed Vitrified tiles with thickness 10mm in floor with different sizes with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in allcolours and shade, laid with cement based high polymer modified quickset tile adhesive (water based) conforming to IS : 15477, in average 6 mmthickness, including grouting of joints (Payment for grouting of joints tobe made separately) Size of Tile 800x800 mm SRP-SRP- Vol-2 (62/9.22.3) Sqm 1653.12 1653.12 36.05 False None None False None False 59594.976 0 3856432 147465 None code28 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.(Vol 2 page no 63/ item no 9.24) Sqm 3194.24 3194.24 34.12 False None None False None False 108987.4688 0 3856433 147465 None code29 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2/ 45/8.25) Sqm 153.44 153.44 185.8 False None None False None False 28509.152 0 3856434 147465 None code30 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2/46/8.30) Sqm 194.88 194.88 210.82 False None None False None False 41084.6016 0 3856435 147465 None code31 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.(CSR 2021-22 )Vol 2 Page no 54 / It no 8.79) Rmtr 44.8 44.8 60.0 False None None False None False 2688.0 0 1724667638000 0 None None Buildings Septic tank 465207.98 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3856436 147466 None code01 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work (CSR 2023-24 Volume No.1 Page No.5 I.No. 1.4.1) In all kinds of soils Depth upto 1.5m Cum 351.62 351.62 73.88 False None None False None False 25977.6856 0 3856437 147466 None code02 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter,excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work (CSR 2023-24 Volume No.1 Page No.5 I.No. 1.4.2) In all kinds of soils Depth exceeding 1.5m, but not exceeding 3 m Cum 548.24 548.24 34.35 False None None False None False 18832.044 0 3856438 147466 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8( M7.5) Using 40 mm nominal size graded crushed coarse aggregates SRP vol I (15/2.1.2) Cum 6343.68 6343.68 6.95 False None None False None False 44088.576 0 3856439 147466 None code04 Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates SRP- 2023-24-vol 1/15/2.2.3 Cum 7309.21 7309.21 3.35 False None None False None False 24485.8535 0 3856440 147466 None code05 Providing and laying in position Reinforced cement concrete for allFoundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machinemixed with super plasticizers laid in finished layers, well compactedusing needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour,Usage charges of machinery, curing and all the other appurtenancesrequired to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates SRP- 2023-24-vol 1/15/2.2.3 Cum 7805.95 7805.95 6.98 False None None False None False 54485.531 0 3856441 147466 None code06 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Including Formwork. M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. SRP- 2023-24-vol 1/16/2.3.2 Cum 10886.4 10886.4 2.96 False None None False None False 32223.744 0 3856442 147466 None code07 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SRP- Vol-2/ 41/8.3.1 Sqm 396.48 396.48 79.2 False None None False None False 31401.216 0 3856443 147466 None code08 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) (SRP - Vol I/P-9 /Sl No 5.1.1) Cum 6284.32 6284.32 11.53 False None None False None False 72458.2096 0 3856444 147466 None code09 Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6.. CSR 2023-24 - Vol-2 (9/5.7) Cum 7565.6 7565.6 1.45 False None None False None False 10970.12 0 3856445 147466 None code10 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. SRP- Vol-I (P-18/2.11 a) Kg 100.19 100.19 1500.0 False None None False None False 150285.0 0 1724667638000 0 None None Buildings Electrical Installation 1355630.28 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3856446 147467 None code01 Internal Wiring : Open Conduit System, Supplying heavy gauge PVC conduit pipe 19/20mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. Make:VIP/Avonplast/Finolex. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 2 of 105, 47/1.1.1 Mtr 77.28 77.28 285.0 False None None False None False 22024.8 0 3856447 147467 None code02 Internal Wiring : Open Conduit System, Supplying heavy gauge PVC conduit pipe 19/20mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25mm dia 2 mm thick. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 2 of 105, 47/1.1.2 Mtr 90.72 90.72 225.0 False None None False None False 20412.0 0 3856448 147467 None code03 Internal Wiring : Open Conduit System, Supplying heavy gauge PVC conduit pipe 19/20mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 32mm dia 2.5 mm thick. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 2 of 105, 47/1.1.3 Mtr 118.72 118.72 75.0 False None None False None False 8904.0 0 3856449 147467 None code04 Internal Wiring : Open Conduit System, Supplying heavy gauge PVC conduit pipe 19/20mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 40 mm dia 2.5 mm thick. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 2 of 105, 47/1.1.4 Mtr 166.88 166.88 50.0 False None None False None False 8344.0 0 3856450 147467 None code05 Concealed Conduit System: Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. Make:VIP/Avonplast/Finolex. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 2 of 105, 47/1.2.1 Mtr 73.92 73.92 200.0 False None None False None False 14784.0 0 3856451 147467 None code06 Concealed Conduit System: Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 25mm dia 2 mm thick. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 2 of 105, 47/1.2.2 Mtr 87.36 87.36 300.0 False None None False None False 26208.0 0 3856452 147467 None code07 Supplying heavy gauge PVC Conduit Pipe 20mm dia mm 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. Make:VIP/Avonplast/Finolex. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 2 of 105, 47/1.3.1 Mtr 76.16 76.16 150.0 False None None False None False 11424.0 0 3856453 147467 None code08 Supplying heavy gauge PVC Conduit Pipe 20mm dia mm 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25mm dia 2 mm thick. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 2 of 105, 47/1.3.2 Mtr 88.48 88.48 300.0 False None None False None False 26544.0 0 3856454 147467 None code09 Supplying heavy gauge PVC Conduit Pipe 20mm dia mm 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 32mm dia 2.5 mm thick. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 2 of 105, 47/1.3.3 Mtr 110.88 110.88 125.0 False None None False None False 13860.0 0 3856455 147467 None code10 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm etc. as required.25mm. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 3 of 105, 47/1.8.2 Mtr 39.2 39.2 300.0 False None None False None False 11760.0 0 3856456 147467 None code11 Supplying PVC flexible conduit pipe 20 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 3 of 105, 1.9.1 Mtr 21.28 21.28 50.0 False None None False None False 1064.0 0 3856457 147467 None code12 Supplying PVC flexible conduit pipe 20 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely. 25mm. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 3 of 105, 1.9.2 Mtr 24.64 24.64 50.0 False None None False None False 1232.0 0 3856458 147467 None code13 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Wire make:Finolex/V-Gaurd/Polycab/Anchor FRLS/Havells/KEI/Salzer. Short Point Upto 3m from tapping point to out let via switch. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 5 of 105, 2.2.1 Point 301.28 301.28 25.0 False None None False None False 7532.0 0 3856459 147467 None code14 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6 mtr from tapping point to outlet via switch box. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 5 of 105, 2.2.2 Point 424.48 424.48 40.0 False None None False None False 16979.2 0 3856460 147467 None code15 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 5 of 105, 2.2.3 Point 621.6 621.6 70.0 False None None False None False 43512.0 0 3856461 147467 None code16 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm. Wire make:Finolex/V-Gaurd /Polycab /Anchor FRLS /Havells /KEI/Salzer. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 5 of 105, 2.3.2 m 29.12 29.12 1120.0 False None None False None False 32614.4 0 3856462 147467 None code17 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 Sqmm Wire. make:Finolex/V-Gaurd /Polycab/Anchor /Havells / KEI /Salzer. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 5 of 105, 2.3.3 m 47.04 47.04 1800.0 False None None False None False 84672.0 0 3856463 147467 None code18 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 Sqmm Wire. make:Finolex/V-Gaurd /Polycab /Anchor/Havells /KEI/Salzer . CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 5 of 105, 2.3.4 m 70.56 70.56 1000.0 False None None False None False 70560.0 0 3856464 147467 None code19 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 Sqmm Wire. make:Finolex/V-Gaurd /Polycab/Anchor /Havells /KEI/Salzer. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 5 of 105, 2.3.5 m 103.04 103.04 100.0 False None None False None False 10304.0 0 3856465 147467 None code20 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 16 Sqmm Wire. make:Finolex/V-Gaurd /Polycab/Anchor /Havells /KEI/Salzer . CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 5 of 105, 2.3.7 m 356.16 356.16 25.0 False None None False None False 8904.0 0 3856466 147467 None code21 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-2 way. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.4.1 Each 154.56 154.56 12.0 False None None False None False 1854.72 0 3856467 147467 None code22 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5 Way. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.4.3 Each 198.24 198.24 10.0 False None None False None False 1982.4 0 3856468 147467 None code23 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6 Way. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.4.4 Each 246.4 246.4 12.0 False None None False None False 2956.8 0 3856469 147467 None code24 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 Way. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.4.5 Each 404.32 404.32 12.0 False None None False None False 4851.84 0 3856470 147467 None code25 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 10-12 Way. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.4.6 Each 357.28 357.28 14.0 False None None False None False 5001.92 0 3856471 147467 None code26 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. Each 406.56 406.56 16.0 False None None False None False 6504.96 0 3856472 147467 None code27 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 18 Way. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.4.8 Each 453.6 453.6 12.0 False None None False None False 5443.2 0 3856473 147467 None code28 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 module. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.5.1 Each 153.44 153.44 20.0 False None None False None False 3068.8 0 3856474 147467 None code29 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.5.3 Each 196.0 196.0 14.0 False None None False None False 2744.0 0 3856475 147467 None code30 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.5.4 Each 262.08 262.08 10.0 False None None False None False 2620.8 0 3856476 147467 None code31 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.5.5 Each 318.08 318.08 10.0 False None None False None False 3180.8 0 3856477 147467 None code32 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12Module. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.5.6 Each 385.28 385.28 18.0 False None None False None False 6935.04 0 3856478 147467 None code33 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12Module. 16 Module. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.5.7 Each 444.64 444.64 20.0 False None None False None False 8892.8 0 3856479 147467 None code34 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12Module. 18 Module. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 8 of 105, 3.5.8 Each 511.84 511.84 12.0 False None None False None False 6142.08 0 3856480 147467 None code35 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 A One way Switch. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 9 of 105, 3.6.1 Each 114.24 114.24 225.0 False None None False None False 25704.0 0 3856481 147467 None code36 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 A Three Way Socket. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 9 of 105, 3.6.3 Each 191.52 191.52 75.0 False None None False None False 14364.0 0 3856482 147467 None code37 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 A Three Way Socket. Stepped Fan Regulator. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 9 of 105, 3.6.4 Each 399.84 399.84 40.0 False None None False None False 15993.6 0 3856483 147467 None code38 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16 A One Way Switch. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 9 of 105, 3.6.7 Each 201.6 201.6 20.0 False None None False None False 4032.0 0 3856484 147467 None code39 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32 A D.P. Switch. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 9 of 105, 3.6.9 Each 365.12 365.12 12.0 False None None False None False 4381.44 0 3856485 147467 None code40 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 A Universal Socket. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 9 of 105, 3.6.10 Each 264.32 264.32 30.0 False None None False None False 7929.6 0 3856486 147467 None code41 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. R J 45/I.O.Out let Cat-6 Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 9 of 105, 3.6.12 Each 377.44 377.44 25.0 False None None False None False 9436.0 0 3856487 147467 None code42 Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size 110 mm conduit using necessary machine screws. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 9 of 105, 3.10.3 Each 23.52 23.52 45.0 False None None False None False 1058.4 0 3856488 147467 None code43 Supplying And fixing of 6 A electrical accessories on existing switch board. 6 A Ceilling Rose. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 10 of 105, 3.14.5 Each 87.36 87.36 36.0 False None None False None False 3144.96 0 3856489 147467 None code44 Supplying And fixing of 6 A electrical accessories on existing switch board. 6 A Batten Holder. Make: Anchor/GM/Cona/Salzer/Lisha. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 10 of 105, 3.14.7 Each 82.88 82.88 75.0 False None None False None False 6216.0 0 3856490 147467 None code45 Control Switch Gears & Accessories: Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 20 of 105, 5.42.2 Sq CM 0.43 0.43 300000.0 False None None False None False 129000.0 0 3856491 147467 None code46 Supplying 100 A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100 Amps 4X30X6mm Aluminium Strips. CSR 2023-24, Volume-6, Part-III,Utilization, SRP 20 of 105, 5.40.1 m 2479.68 2479.68 6.0 False None None False None False 14878.08 0 3856492 147467 None code47 Supplying 100 A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250 A 4 X 30 X 10mm Aluminium Strips. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 20 of 105, 5.40.2 m 3447.36 3447.36 2.0 False None None False None False 6894.72 0 3856493 147467 None code48 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40 X 40 X 6mm . CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 20 of 105, 5.41.1 m 308.0 308.0 25.0 False None None False None False 7700.0 0 3856494 147467 None code49 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75 X 75 X 6 mm angle iron frame work. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 20 of 105, 5.41.3 m 556.64 556.64 8.0 False None None False None False 4453.12 0 3856495 147467 None code50 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 19 of 105, 5.38 Each 519.68 519.68 16.0 False None None False None False 8314.88 0 3856496 147467 None code51 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 19 of 105, 5.34 Each 565.6 565.6 12.0 False None None False None False 6787.2 0 3856497 147467 None code52 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 19 of 105, 5.33 Each 9374.4 9374.4 3.0 False None None False None False 28123.2 0 3856498 147467 None code53 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 18 of 105, 5.21 Each 9313.92 9313.92 1.0 False None None False None False 9313.92 0 3856499 147467 None code54 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 100 Amps 25kA.Four Pole. Make: L&T/Sneider /Legrand/Havlls. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 17 of 105, 5.15.9 Each 9256.8 9256.8 6.0 False None None False None False 55540.8 0 3856500 147467 None code55 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. 125 A 25kA Four Pole MCCB. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 17 of 105, 5.15.10 Each 11280.64 11280.64 2.0 False None None False None False 22561.28 0 3856501 147467 None code56 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6 - 32 Amps.SP. Make: L&T/Sneider/Legrand/ Havells. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 17 of 105, 5.18.1 Each 585.76 585.76 30.0 False None None False None False 17572.8 0 3856502 147467 None code57 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP MCB. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 17 of 105, 5.18.4 Each 1235.36 1235.36 25.0 False None None False None False 30884.0 0 3856503 147467 None code58 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps TPN MCB. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 17 of 105, 5.18.7 Each 1990.24 1990.24 12.0 False None None False None False 23882.88 0 3856504 147467 None code59 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 Amps TPN MCB. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 17 of 105, 5.18.8 Each 2680.16 2680.16 12.0 False None None False None False 32161.92 0 3856505 147467 None code60 L.T.Underground Cables: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 10SQmm 4 Core. (10 GI Stris-4 X 0.8 mm). Make: Finolex/ Polycab/Havells/KEI. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 13 of 81, 199/32.03. Km 166445.44 166445.44 0.1 False None None False None False 16644.544 0 3856506 147467 None code61 L.T.Underground Cables: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.16 SQmm, 4 Core LTUG Cable , (11 GI Strips- 4x 0.8mm) CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 13 of 81, 201/32.05. Km 205455.04 205455.04 0.15 False None None False None False 30818.256 0 3856507 147467 None code62 L.T.Underground Cables: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 SQmm, 4 Core LTUG Cable , (13 GI Strips- 4x 0.8mm) CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 13 of 81, 204/32.08. Km 269710.56 269710.56 0.15 False None None False None False 40456.584 0 3856508 147467 None code63 L.T.Underground Cables: 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 50 SQmm, 4 Core LTUG Cable, 17 GI Strips- 4x 0.8mm) CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 13 of 81, 208/32.12. Km 232057.28 232057.28 0.2 False None None False None False 46411.456 0 3856509 147467 None code64 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Water Supply & UGD Works CSR 2021-22, Volume-V. SRP 163/40. Each 4977.0 4977.0 4.0 False None None False None False 19908.0 0 3856510 147467 None code65 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, . In Hard Soil. CSR 2021-22,Volume-VI, SRP 8 of 14/ 202-29.03. cm 389.0 389.0 40.0 False None None False None False 15560.0 0 3856511 147467 None code66 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable: 2.5 to 25 SQmm. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 52 of 81, 174/21.05. Km 18098.08 18098.08 0.75 False None None False None False 13573.56 0 3856512 147467 None code67 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 35 to 95 SQMM . CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 52 of 81, 175/21.06. Km 26484.64 26484.64 1.0 False None None False None False 26484.64 0 3856513 147467 None code68 Aluminium End Terminal (Lug)- 10 SQmm size. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 27 of 81, 469/60.01. No 3.36 3.36 64.0 False None None False None False 215.04 0 3856514 147467 None code69 Aluminium End Terminal (Lug)- 16 SQmm size. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 27 of 81, 470/60.02. No 3.36 3.36 36.0 False None None False None False 120.96 0 3856515 147467 None code70 Aluminium End Terminal (Lug)- 25 SQmm size. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 27 of 81, 471/60.03. No 4.48 4.48 36.0 False None None False None False 161.28 0 3856516 147467 None code71 Aluminium End Terminal (Lug)-50 SQmm size. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 27 of 81, 473/60.05. No 10.08 10.08 36.0 False None None False None False 362.88 0 3856517 147467 None code72 PVC Pipe as per IS-2509-100 mm dia. CSR 2021-22,Volume-VI, SRP 15 of 27/392-48.09 Mtr 256.0 256.0 35.0 False None None False None False 8960.0 0 3856518 147467 None code73 PVC Pipe as per IS-2509-150 mm dia. CSR 2021-22,Volume-VI, SRP 15 of 27/393-48.10 Mtr 534.0 534.0 50.0 False None None False None False 26700.0 0 3856519 147467 None code74 Digging of Pit for providing GI Pipe type Earthing. Hard Soil. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 43 of 81, 22 / 1.6.2 Per Pit 2539.04 2539.04 8.0 False None None False None False 20312.32 0 3856520 147467 None code75 GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 22 of 81, 389/ 51.01 No 862.4 862.4 10.0 False None None False None False 8624.0 0 3856521 147467 None code76 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 22 of 81, 390 / 51.02 No 739.2 739.2 10.0 False None None False None False 7392.0 0 3856522 147467 None code77 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 22 of 81, 391 / 51.03 Bag 402.08 402.08 10.0 False None None False None False 4020.8 0 3856523 147467 None code78 GI Pipe B - Class as per IS-1239-G I Pipe 40mm Dia. CSR 2021-22,Volume-VI, SRP 16 of 27/409 -49.04 Mtr 295.0 295.0 20.0 False None None False None False 5900.0 0 3856524 147467 None code79 GI Pipe B - Class as per IS-1239-G I Pipe 63 mm Dia. CSR 2021-22,Volume-VI, SRP 16 of 27/411 -49.06 Mtr 415.0 415.0 20.0 False None None False None False 8300.0 0 3856525 147467 None code80 RCC Hume pipe 2000mm long 200mm dia. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 32 of 81, 578 / 68.02 Mtr 1293.6 1293.6 10.0 False None None False None False 12936.0 0 3856526 147467 None code81 Collars for RCC Hume pipe 200mm dia. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 32 of 81, 580 / 68.04 No 115.36 115.36 20.0 False None None False None False 2307.2 0 3856527 147467 None code82 Supplying and drawing UTP-CAT 6E LAN cable. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 36 of 105, 580 / 8.1 m 42.56 42.56 300.0 False None None False None False 12768.0 0 3856528 147467 None code83 Supplying & Fixing of switch mounting rack with power manager & Cable manager.12 U with 450mm depth. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 36 of 105, 8.4.4 Each 9895.2 9895.2 1.0 False None None False None False 9895.2 0 3856529 147467 None code84 Supplying fixing of Network Switches: 24 Port 10/100 Switch. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 36 of 105, 8.9.5 Each 5264.0 5264.0 1.0 False None None False None False 5264.0 0 3856530 147467 None code85 Supplying & fixing of I/O socket with back box.Single I/O. CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 36 of 105, 8.10.1 Each 548.8 548.8 24.0 False None None False None False 13171.2 0 3856531 147467 None code86 Supplying & fixing of First Aid Chart with Lamination. PWD ELE SR 2010-11. SRP 65/11 Each 225.0 225.0 2.0 False None None False None False 450.0 0 3856532 147467 None code87 Supplying & fixing of DANGER BOARD made out of MS sheet metal with two coats of non corrossive enamel paint. PWD ELE SR 2010-11. SRP 66/12 Each 75.0 75.0 6.0 False None None False None False 450.0 0 3856533 147467 None code88 Supplying & Installation of RUBBER MAT 1mt X 2mt-10mm thick. PWD ELE SR SRP 66/13. Each 1105.0 1105.0 3.0 False None None False None False 3315.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724667643000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1724667643000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724667643000 1 None None ELIGIBILITY The contractors shall quote their rates for all items excluding GST None 1724667643000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724667643000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1724668025000 1 None None ELIGIBILITY As per FD Circular No :417 Date : 09.08.2024 All the rates are Excluding GST only. None 1724671211000 0 None None ELIGIBILITY Tenderer should upload the documents as prescribed in the eligibility Criteria (Technical Criteria page only but not in the additional documents). Otherwise department not held responsible. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Executed in any one financial year during last five years i.e 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24 the minimum quantities of work 1. Earth work Excavation/Filling Earth : 2500.00 Cum 2. DLC/PCC/RCC : 920.00 Cum 3. Reinforcement Steel -Mild Steel/HYSD/TMT : 53665.00 Kg 4. Plastering : 1900.00Sqm 5. Flooring Work (Vitrified/Ceramic/Granite) : 613.00 Sqm 6. BBM/SSM/CC Solid block/Similar masonry walls : 164.00 Cum 7. Truss Work : 40147.00 Kg 8. Metacolour Sheet/ Polycarbone Sheet : 917.00 Sqm. Certificate issued from the competent authority not below the rank of Executive Engineer in case of Govt., / Public Sectors under takings. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To Qualify for award of this contract the Tenderer must have valid Class - 2 and above Civil Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification. Scanned copy of Valid contractors Registration Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None To Qualify for award of this contract the Tenderer, as a prime contractor, should have in his name satisfactorily completed at least one similar nature of work i.e. Building Construction Works costing not less than Rs.1,75,49,550.00 during the last five years i.e, 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24. The work must have completed till last date of submission of tenders. Work Done Certificate shall clearly mention the date of completion of the certified work. Scanned copy of the Work done Completion Certificate, Certified by an Officer not below the rank of Executive Engineer for work done in Govt.,/public sector undertakings. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To Qualify for award of this contract the Tenderer has to furnish Liquid assets statement or availability of credit facilities for an amount not less than Rs. 1,75,49,250/- letter of credit issued from any nationalized Bank / Schedule bank (excluding Co-operative banks) in the prescribed format. Scanned Copy of the Credit Lines / Letters of Credit / Certificates from any nationalized Bank / Schedule bank (excluding Co-operative banks), clearly specifying name of the work and/or work indent (as per the prescribed format) addressed to the Executive Engineer, NWKRTC, C.E. Department, HUBBALLI. (Annexure-A) duly signed by Bank manager with date. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity : ( (A X N x 1.5) - B) Where A : Maximum value of Civil Engineering works, updated to 2023-24 price level, executed in any one year during the last five years.( Completed as well as works in progress ). B : Value at 2023-24 price level of existing commitments and ongoing works to be completed during the next two years. N : Number of years prescribed for completion of the work for which tender is invited. 1.5 : Multiplying factor for assessing the available tender capacity for works costing more than Rs.100.00Lakhs. The Bidder/Contractor must upload the Scanned copy of details of existing commitments and ongoing works to be completed in the prescribed format only (Annexure-B) duly signed. In case the Bidder does not have any existing commitments, the same should be indicated as NIL in the prescribed format, duly signed. Details uploaded in any other format or uploaded documents in which the Bidder himself has calculated the Bid capacity will not be considered for evaluation and also will not qualify for eligibility. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Annexure-B None None None None To Qualify for award of this contract the Tenderer in his name should have, in the last five financial years ( i.e. during the years 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 achieved in at least two financial years a minimum financial turnover of Rs. 7,01,97,000/- (In all classes of civil engineering construction works only). Scanned copy of year wise audited profit / loss statement of two financial years in which minimum financial turnover of Rs. 7,01,97,000/- is achieved. (Certified by Chartered Accountant only. Statement issued by others will not qualify for eligibility). Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None The bidder must have following Key & critical equipments. a) Owned 1. Concrete batch mixing plant /machine mixture/Transit -01, 2. Tipper- 02, 3.Shuttering materials - 175 Sqmt, b) Hired/lease basis. 1. Excavator -01, 2.Tipper - 02, 3. Water tanker - 01, 4.Shuttering materials -175 Sqmt. Details of having Key and Critical equipments owned/hired/leased by the bidder should mention such details in the prescribed format (Annexure-C) and duly signed by the bidder, the same should be uploaded in the portal. Otherwise bid will not be considered for evaluation. Others Annexure C createdTs version createdDate modifiedDate documentName None None None None Others -- Annexure-C None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable None None None None Not Applicable Others Not Applicable createdTs version createdDate modifiedDate documentName None None None None Others -- Not Applicable
tenderCriterionDocumentList	documentName optional documentTypeText KPWD/MES/CPWD Registration Certificate True Technical Bid Work done certificate True Technical Bid Work done Quantity - Yearwise Breakup qty True Technical Bid Turnover, Profit & loss statement True Technical Bid LOC - ANNEXURE-A True Technical Bid Bid capacity - Annexure B True Technical Bid Key and critical equipments - Annexure C True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1724673112000 version 0 createdDate None modifiedDate None blockNumber Executive Engineer, NWKRTC, CE Department, Central Office, Old H-D City Division Office building, Opposite to M-2 Depot, Gokul Road Hubballi. street None city Hubballi state Karnataka pin 580030
tenderRecallDTO	None