createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1723547270725 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2250.00 emd 162500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 06-09-2024 16:30:00 tenderQueryClose 03-09-2024 16:30:00 technicalBidOpen 09-09-2024 11:00:00 publishedDate 26-08-2024 17:13:17 publishedByPost RDPR_EE_DIV_RCR publishedByUser KPE14312 - VENKATESH GALAG bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Anand Patil splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 7975468766 tenderSupplierList None
tenderSchedule	createdTs 1723547270765 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT7545 title Construction of KGBV Girls Dormitory (Type-1) at Mallat Village in Manvi Taluka of Raichur District. (Under 4202-01-202-1-08 KGBV Grant For the Year 2023-24) description Construction of KGBV Girls Dormitory (Type-1) at Mallat Village in Manvi Taluka of Raichur District. (Under 4202-01-202-1-08 KGBV Grant For the Year 2023-24) category WORKS categoryText Works ecv 8963310.31 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 963 locationName RDPR Division Office Raichur provisionalAmount 10800000.0 groupOverheadTotal None fileNumber EE/PRED/RCR/4202/MANVI/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1723547271000 0 None None Buildings Construction of KGBV Girls Dormitory (Type-1) at Mallat Village in Manvi Taluka of Raichur District. (Under 4202-01-202-1-08 KGBV Grant For the Year 2023-24) 8149909.69 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3769659 141966 None 001 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 99.75 99.75 126.42 False None None False None False 12610.395 0 3769660 141966 None 002 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work Cum 107.1 107.1 461.16 False None None False None False 49390.236 0 3769661 141966 None 003 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 254.1 254.1 118.8 False None None False None False 30187.08 0 3769662 141966 None 004 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. Cum 2816.1 2816.1 28.35 False None None False None False 79836.435 0 3769663 141966 None 005 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 6527.85 6527.85 4.52 False None None False None False 29505.882 0 3769664 141966 None 006 Additionalities for form work, centering and scaffolding for Lintel Beam 60% Cum 3916.71 3916.71 4.52 False None None False None False 17703.5292 0 3769665 141966 None 007 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Below Footing Cum 6288.45 6288.45 28.35 False None None False None False 178277.5575 0 3769666 141966 None 008 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Below Flooring Bed Concrete Cum 6288.45 6288.45 28.4 False None None False None False 178591.98 0 3769667 141966 None 009 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 472.82 472.82 528.62 False None None False None False 249942.1084 0 3769668 141966 None 010 Providing and laying in position Cement Concrete for all Foundation works. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Footing Cum 6652.8 6652.8 79.42 False None None False None False 528365.376 0 3769669 141966 None 011 Additionalities for form work, centering and scaffolding for Footing 8 % Cum 532.22 532.22 79.42 False None None False None False 42268.9124 0 3769670 141966 None 012 Providing and laying in position Cement Concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column Cum 6652.8 6652.8 4.7 False None None False None False 31268.16 0 3769671 141966 None 013 Additionalities for form work, centering and scaffolding for Footing 70 % Cum 4656.96 4656.96 4.7 False None None False None False 21887.712 0 3769672 141966 None 014 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. GRADE BEAM Cum 7185.15 7185.15 9.17 False None None False None False 65887.8255 0 3769673 141966 None 015 Additionalities for form work, centering and scaffolding for Beam 60 % Cum 4311.09 4311.09 9.17 False None None False None False 39532.6953 0 3769674 141966 None 016 Providing and laying in position Cement Concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH BEAM Cum 7185.15 7185.15 17.0 False None None False None False 122147.55 0 3769675 141966 None 017 Additionalities for form work, centering and scaffolding for Beam 60 % Cum 4311.09 4311.09 17.0 False None None False None False 73288.53 0 3769676 141966 None 018 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. For Column Cum 7185.15 7185.15 13.37 False None None False None False 96065.4555 0 3769677 141966 None 019 Additionalities for form work, centering and scaffolding for Column 70 % Cum 5029.61 5029.61 13.37 False None None False None False 67245.8857 0 3769678 141966 None 020 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. For Lintel Beam Cum 7185.15 7185.15 5.46 False None None False None False 39230.919 0 3769679 141966 None 021 Additionalities for form work, centering and scaffolding for Column 60 % Cum 4311.09 4311.09 5.46 False None None False None False 23538.5514 0 3769680 141966 None 022 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Staircase Cum 7185.15 7185.15 2.23 False None None False None False 16022.8845 0 3769681 141966 None 023 Additionalities for form work, centering and scaffolding for Staircase 50 % Cum 3592.58 3592.58 2.23 False None None False None False 8011.4534 0 3769682 141966 None 024 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. For Roof Beam Cum 7185.15 7185.15 19.36 False None None False None False 139104.504 0 3769683 141966 None 025 Additionalities for form work, centering and scaffolding for Roof Beam 60 % Cum 4311.09 4311.09 19.36 False None None False None False 83462.7024 0 3769684 141966 None 026 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. For Roof Slab Cum 7185.15 7185.15 35.8 False None None False None False 257228.37 0 3769685 141966 None 027 Additionalities for form work, centering and scaffolding for Roof Slab 50 % Cum 3592.58 3592.58 35.8 False None None False None False 128614.364 0 3769686 141966 None 028 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. For Chajja Cum 7185.15 7185.15 1.26 False None None False None False 9053.289 0 3769687 141966 None 029 Additionalities for form work, centering and scaffolding for Chejja 45 % Cum 3233.32 3233.32 1.26 False None None False None False 4073.9832 0 3769688 141966 None 030 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Cum 1375.5 1375.5 87.63 False None None False None False 120535.065 0 3769689 141966 None 031 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8631.0 8631.0 76.2 False None None False None False 657682.2 0 3769690 141966 None 032 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 255.32 False None None False None False 68361.93 0 3769691 141966 None 033 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 267.75 267.75 692.59 False None None False None False 185440.9725 0 3769692 141966 None 034 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 389.55 389.55 450.58 False None None False None False 175523.439 0 3769693 141966 None 035 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 105.0 105.0 893.24 False None None False None False 93790.2 0 3769694 141966 None 036 Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Cum 104580.0 104580.0 0.318 False None None False None False 33256.44 0 3769695 141966 None 037 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. Cum 3488.1 3488.1 23.77 False None None False None False 82912.137 0 3769696 141966 None 038 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Nos 1104.6 1104.6 10.0 False None None False None False 11046.0 0 3769697 141966 None 039 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm Nos 107.1 107.1 18.0 False None None False None False 1927.8 0 3769698 141966 None 040 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete Nos 126.0 126.0 6.0 False None None False None False 756.0 0 3769699 141966 None 041 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Nos 248.85 248.85 8.0 False None None False None False 1990.8 0 3769700 141966 None 042 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No. 130.00 12.64 Providing and fixing PTMT door catcher of length 72 mm and dia. of Nos 136.5 136.5 24.0 False None None False None False 3276.0 0 3769701 141966 None 043 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications Kgs 513.45 513.45 48.1 False None None False None False 24696.945 0 3769702 141966 None 044 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications Kgs 599.55 599.55 38.36 False None None False None False 22998.738 0 3769703 141966 None 045 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Nos 1037.4 1037.4 27.0 False None None False None False 28009.8 0 3769704 141966 None 046 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specificat Nos 1055.0 1055.0 14.0 False None None False None False 14770.0 0 3769705 141966 None 047 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kgs 192.15 192.15 627.48 False None None False None False 120570.282 0 3769706 141966 None 048 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Sqm 1233.75 1233.75 321.46 False None None False None False 396601.275 0 3769707 141966 None 049 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Sqm 1233.75 1233.75 26.41 False None None False None False 32583.3375 0 3769708 141966 None 050 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 2189.25 2189.25 61.99 False None None False None False 135711.6075 0 3769709 141966 None 051 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 2189.25 2189.25 114.2 False None None False None False 250012.35 0 3769710 141966 None 052 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high m 344.4 344.4 546.6 False None None False None False 188249.04 0 3769711 141966 None 053 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1521.45 1521.45 15.26 False None None False None False 23217.327 0 3769712 141966 None 054 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 144.9 144.9 29.9 False None None False None False 4332.51 0 3769713 141966 None 055 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreignmatter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 145.95 145.95 49.01 False None None False None False 7153.0095 0 3769714 141966 None 056 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) Sqm 165.9 165.9 692.59 False None None False None False 114900.681 0 3769715 141966 None 057 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 657.0 False None None False None False 389765.25 0 3769716 141966 None 058 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) Sqm 165.9 165.9 226.3 False None None False None False 37543.17 0 3769717 141966 None 059 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 182.7 182.7 450.58 False None None False None False 82320.966 0 3769718 141966 None 060 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge cm 4.2 4.2 2000.0 False None None False None False 8400.0 0 3769719 141966 None 061 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Tonne 93929.85 93929.85 23.52 False None None False None False 2209230.072 0 1723547271000 0 None None Buildings FOR ELECTRICAL WORK 406638.4 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3769720 141967 None 001 Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick Mtr 78.0 78.0 150.0 False None None False None False 11700.0 0 3769721 141967 None 002 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25 mm dia 2 mm thick Mtr 79.0 79.0 200.0 False None None False None False 15800.0 0 3769722 141967 None 003 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 32 mm dia 2.5 mm thick Mtr 99.0 99.0 100.0 False None None False None False 9900.0 0 3769723 141967 None 004 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box Each 56.0 56.0 100.0 False None None False None False 5600.0 0 3769724 141967 None 005 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 100 x 75 x 65 mm Each 118.0 118.0 20.0 False None None False None False 2360.0 0 3769725 141967 None 006 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 100 x 75 x 65 mm 200 x 200 x 65 mm Each 348.0 348.0 40.0 False None None False None False 13920.0 0 3769726 141967 None 007 Supplying And Fixing Metal Fan Box with Round Hook. Nos 117.0 117.0 25.0 False None None False None False 2925.0 0 3769727 141967 None 008 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point 269.0 269.0 35.0 False None None False None False 9415.0 0 3769728 141967 None 009 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. A medium piont above 6Mtr from tapping piont out Point 379.0 379.0 25.0 False None None False None False 9475.0 0 3769729 141967 None 010 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. A medium piont above 10Mtr from tapping piont out Point 555.0 555.0 15.0 False None None False None False 8325.0 0 3769730 141967 None 011 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 Sqmm Mtr 26.0 26.0 600.0 False None None False None False 15600.0 0 3769731 141967 None 012 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 Sqmm 30 Nos 42.0 42.0 300.0 False None None False None False 12600.0 0 3769732 141967 None 013 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4Sqmm Mtr 63.0 63.0 50.0 False None None False None False 3150.0 0 3769733 141967 None 014 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box.1 to 3 Module Each 137.0 137.0 15.0 False None None False None False 2055.0 0 3769734 141967 None 015 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box. 4 Module Each 175.0 175.0 15.0 False None None False None False 2625.0 0 3769735 141967 None 016 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box. 8 Module Each 284.0 284.0 40.0 False None None False None False 11360.0 0 3769736 141967 None 017 Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 344.0 344.0 40.0 False None None False None False 13760.0 0 3769737 141967 None 018 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. For 6Amps one way Each 102.0 102.0 250.0 False None None False None False 25500.0 0 3769738 141967 None 019 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps twoway Each 166.0 166.0 30.0 False None None False None False 4980.0 0 3769739 141967 None 020 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped fan regulator Each 357.0 357.0 25.0 False None None False None False 8925.0 0 3769740 141967 None 021 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch Each 180.0 180.0 10.0 False None None False None False 1800.0 0 3769741 141967 None 021 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 326.0 326.0 10.0 False None None False None False 3260.0 0 3769742 141967 None 022 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 236.0 236.0 10.0 False None None False None False 2360.0 0 3769743 141967 None 024 Supplying and fixing 32A security and energy saving DPswitch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. Each 646.0 646.0 5.0 False None None False None False 3230.0 0 3769744 141967 None 025 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps SP Each 415.0 415.0 5.0 False None None False None False 2075.0 0 3769745 141967 None 026 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps DP Each 739.0 739.0 5.0 False None None False None False 3695.0 0 3769746 141967 None 027 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure II - Double Door 12 Way SP & N Each 2329.0 2329.0 1.0 False None None False None False 2329.0 0 3769747 141967 None 028 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure II - Double Door 4 Way TP & N Each 4038.0 4038.0 1.0 False None None False None False 4038.0 0 3769748 141967 None 029 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel bo Each 9255.0 9255.0 1.0 False None None False None False 9255.0 0 3769749 141967 None 030 Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 250 A 4 x 30 x 10 mm Aluminium Strips m 3435.0 3435.0 1.0 False None None False None False 3435.0 0 3769750 141967 None 031 Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 400 A 4 x 50 x 10 mm Aluminium Strips m 4445.0 4445.0 1.0 False None None False None False 4445.0 0 3769751 141967 None 032 Supplying and fixing digital frequency meter with latest micro controller technology, ultra bright 4 digit LED display, from 30-500V AC and optional or relay output for high/low frequency and wiring complete. Each 975.0 975.0 1.0 False None None False None False 975.0 0 3769752 141967 None 033 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 Km 139549.0 139549.0 0.04 False None None False None False 5581.96 0 3769753 141967 None 034 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. Km 20886.0 20886.0 0.04 False None None False None False 835.44 0 3769754 141967 None 035 Epoxy Terminating Kit (Pothead) suitable for 1.1 kv, LTUG Cable Each 324.0 324.0 5.0 False None None False None False 1620.0 0 3769755 141967 None 036 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. Each 2969.0 2969.0 5.0 False None None False None False 14845.0 0 3769756 141967 None 037 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. Each 2984.0 2984.0 25.0 False None None False None False 74600.0 0 3769757 141967 None 038 Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Each 690.0 690.0 50.0 False None None False None False 34500.0 0 3769758 141967 None 039 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Each 885.0 885.0 20.0 False None None False None False 17700.0 0 3769759 141967 None 040 Supply of round/square recess/surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Each 63.0 63.0 100.0 False None None False None False 6300.0 0 3769760 141967 None 041 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps Each 122.0 122.0 50.0 False None None False None False 6100.0 0 3769761 141967 None 042 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 171.0 171.0 25.0 False None None False None False 4275.0 0 3769762 141967 None 043 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame Each 707.0 707.0 5.0 False None None False None False 3535.0 0 3769763 141967 None 044 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps On wall/ ceiling / Rafter / Girders Each 122.0 122.0 20.0 False None None False None False 2440.0 0 3769764 141967 None 045 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN Each 1717.0 1717.0 2.0 False None None False None False 3434.0 0 1723547271000 0 None None Buildings For Septic Tank Work 116639.82 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3769765 141968 None 001 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m (SR 2023-24/ Item No: 1.15.2, Page No: 9 Vol 1 Cum 446.25 446.25 17.66 False None None False None False 7880.775 0 3769766 141968 None 002 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(SR 2023-24/ Item No: 2.1.3, Page No: 15 Vol 1) Cum 6288.45 6288.45 1.26 False None None False None False 7923.447 0 3769767 141968 None 003 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (SR 2023-24/ Item No: 2.5.1, Page No: 16 Vol 2) Cum 6961.5 6961.5 1.97 False None None False None False 13714.155 0 3769768 141968 None 004 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (SR 2023-24/ Item No: 2.11, Page No: 18 Vol 1) Tonne 93929.85 93929.85 0.1579 False None None False None False 14831.523315 0 3769769 141968 None 005 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (SR 2023-24, Item No: 5.4, Page No: 9 Vol 2) Cum 6708.45 6708.45 6.53 False None None False None False 43806.1785 0 3769770 141968 None 006 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(SR 2023-24, Item No: 8.3.2, Page No: 41 Vol 2 Sqm 349.65 349.65 25.92 False None None False None False 9062.928 0 3769771 141968 None 007 Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.(SR 2023-24, Item No: 7.3, Page No: 85, Vol 5 Nos 2247.0 2247.0 1.0 False None None False None False 2247.0 0 3769772 141968 None 008 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.110mm dia (SR 2023-24, Item No: 10.14.4, Page No: 120 Vol 5) Rmtr 296.1 296.1 58.0 False None None False None False 17173.8 0 1723547271000 0 None None Buildings For Water Supply and Sanitary 290122.4 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3769773 141969 None 001 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Each 5128.0 5128.0 5.0 False None None False None False 25640.0 0 3769774 141969 None 002 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 3236.0 3236.0 5.0 False None None False None False 16180.0 0 3769775 141969 None 003 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia each 76.00 14.28.1.2 40 mm dia Each 80.0 80.0 5.0 False None None False None False 400.0 0 3769776 141969 None 004 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g. Nos 888.0 888.0 5.0 False None None False None False 4440.0 0 3769777 141969 None 005 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Nos 651.0 651.0 10.0 False None None False None False 6510.0 0 3769778 141969 None 006 Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable circular lid. Nos 212.0 212.0 20.0 False None None False None False 4240.0 0 3769779 141969 None 007 Providing and fixing gun metal non- return valve of approved quality (screwed end) 25 mm nominal bore Horizontal: Nos 651.0 651.0 1.0 False None None False None False 651.0 0 3769780 141969 None 008 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore Nos 349.0 349.0 5.0 False None None False None False 1745.0 0 3769781 141969 None 009 Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 g Nos 330.0 330.0 15.0 False None None False None False 4950.0 0 3769782 141969 None 010 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g Each 152.0 152.0 5.0 False None None False None False 760.0 0 3769783 141969 None 011 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete Each 1281.0 1281.0 5.0 False None None False None False 6405.0 0 3769784 141969 None 012 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall m 820.0 820.0 60.0 False None None False None False 49200.0 0 3769785 141969 None 013 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia pipes m 501.0 501.0 60.0 False None None False None False 30060.0 0 3769786 141969 None 014 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Ltr 9.45 9.45 2000.0 False None None False None False 18900.0 0 3769787 141969 None 015 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. Discuss 13.40.1 2 HP, Size 65x50 2 HP, Size 65x50 Head 13M, Discharge 462 LPM No 15918.0 15918.0 1.0 False None None False None False 15918.0 0 3769788 141969 None 016 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore Each 690.0 690.0 5.0 False None None False None False 3450.0 0 3769789 141969 None 017 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Each 286.0 286.0 5.0 False None None False None False 1430.0 0 3769790 141969 None 018 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Each 651.0 651.0 5.0 False None None False None False 3255.0 0 3769791 141969 None 019 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. Cum 446.0 446.0 11.16 False None None False None False 4977.36 0 3769792 141969 None 020 Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Nos 5727.0 5727.0 10.0 False None None False None False 57270.0 0 3769793 141969 None 021 Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc Each 2247.0 2247.0 10.0 False None None False None False 22470.0 0 3769794 141969 None 022 Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete for:Pipes of SN4, 110mm dia. m 302.0 302.0 32.0 False None None False None False 9664.0 0 3769795 141969 None 023 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. m 279.0 279.0 5.76 False None None False None False 1607.04 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1723547272000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1723547272000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1723547272000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1723547272000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1723547272000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1723547397000 0 None None ELIGIBILITY Qualifications of the tenderer required as mentioned in the Technical Bid KW-4 in General conditions 3 must be furnished. None 1723547401000 0 None None ELIGIBILITY Tender of the contractor, who have not completed the work in time, not executed the agreement in time in any other cases in this Division as per Clause 3.4 of Standard Tender Document and practices as mentioned in clause 25 of the standard tender document will not be accepted. None 1723547404000 0 None None ELIGIBILITY The undersigned reserves the right to accept any or all tenders without assigning any reason. None 1723547409000 0 None None ELIGIBILITY Contractor should execute the work by procuring cement, steel any other materials/Machinery for the work on their own and necessary quality test certificate should be produced and approval of the same. None 1723547413000 0 None None ELIGIBILITY Other details can be seen in the tender documents None 1723547417000 0 None None ELIGIBILITY Contractors should have to upload the Scan copy of all necessary Qualification Documents/ Certificates, and submitted duly attested by notary while tender Evaluvation in this Division None 1723547421000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing e-procurement portal. None 1723547426000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 Qualification of Instructions to Tenders (ITT), will only be considered for evaluation. None 1723547433000 0 None None ELIGIBILITY Contractors should have to upload the necessary Qualification details as Section 3 Clause 1.1 to 1.10 in prescribed formats of KW-4. None 1723547438000 0 None None ELIGIBILITY The contractor should counter check all the designs of the scheme before execution / procurement of material and bring to the notice of the departmental officers for rectification. None 1723547442000 0 None None ELIGIBILITY The contractors have to verify the designs and drawings prepared by the department and supplied for construction. correct the same for any mistakes and to submit it for the approval of the department prior to commencement of execution. None 1723547447000 0 None None ELIGIBILITY The contractor should furnish the Contractor license Certificate None 1723547462000 0 None None ELIGIBILITY Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Raichur within 20 days from the date of receiving the letter of acceptance. Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. Cluase 25 of KW-4. None 1723547476000 0 None None ELIGIBILITY The Building constructed under this programme shall be of high standard, requiring no major repairs for 3 years, The contractor shall furnish performance guarantee for 3 years as per clause and the performance guarantee will be released only after 3 years after completion of work. None 1723547567000 0 None None ELIGIBILITY The Tenderer shall obtain the workdone certificate in the prescribed form from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate / Certificates shall be produced whenever required. None 1723547577000 0 None None ELIGIBILITY Third party inspection is mandatory for all the works in this programme None 1723547670000 0 None None ELIGIBILITY The work should be completed within the stipulated period from the date of agreement & The date of agreement itself is the date of commencement of the work None 1723547678000 0 None None ELIGIBILITY The work should be completed in 9 months (including mansoon) None 1723547684000 0 None None ELIGIBILITY The defect liability period is 2 years and 3 years for major construction repairs. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 89.63 Lakhs) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Satisfactorily completed as prime contractor at-least one such similar work of value not less than Rs. 44.82 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work (1. Earthwork & Constn of Embankment : 1011.05 Cum 2) PCC/RCC : 201.81 Cum 3) Steel : 18.936 Tone 4) SSM/BBM : 136.28 Cum, 5) Flooring : 419.25 Sqm, 6) Plastering : 1139.53 Sqm) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer or his identified Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Liquid assets and /or availability of credit facilities of no less than Rs. 29.88 Lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText PWD Contractor Registration Certificate True Technical Bid Previous Five years Financial Turn over 2019-20 to 2023-24 True Technical Bid Similar nature of Work done Certificate True Technical Bid Quantity wise Work done certificate True Technical Bid Line of credit Bank letter head True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None