| 1724670091000 | 0 | None | None | Buildings | Construction of Additional Building in KPS School Sattigeri of Savadatti Taluk | 2965056.04 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3856959 | 147506 | None | code1 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- harge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Kg | 136.0 | 136.0 | 3481.65 | False | None | None | False | None | False | 473504.4 | 0 | | 3856960 | 147506 | None | code2 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two
coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.
0.63 mm thick with zinc coating not less than 275 g/ m² with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 879.0 | 879.0 | 615.33 | False | None | None | False | None | False | 540875.07 | 0 | | 3856961 | 147506 | None | code3 | Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers omplete as per design drawings.0.63 mm thick with zinc coating not less than 275 g/m² with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | m | 639.0 | 639.0 | 88.2 | False | None | None | False | None | False | 56359.8 | 0 | | 3856962 | 147506 | None | code4 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 333.0 | 333.0 | 596.43 | False | None | None | False | None | False | 198611.19 | 0 | | 3856963 | 147506 | None | code5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 100.0 | 100.0 | 956.91 | False | None | None | False | None | False | 95691.0 | 0 | | 3856964 | 147506 | None | code6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- harge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 137.0 | 137.0 | 1210.88 | False | None | None | False | None | False | 165890.56 | 0 | | 3856965 | 147506 | None | code7 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered
UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE
(Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be
provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be
made) with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 5023.0 | 5023.0 | 97.5 | False | None | None | False | None | False | 489742.5 | 0 | | 3856966 | 147506 | None | code8 | Providing & fixing fly proof wire gauze to windows, lerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 687.0 | 687.0 | 97.5 | False | None | None | False | None | False | 66982.5 | 0 | | 3856967 | 147506 | None | code9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 115.0 | 115.0 | 161.25 | False | None | None | False | None | False | 18543.75 | 0 | | 3856968 | 147506 | None | code10 | Providing and laying vitrified floor tiles in 600mmx600mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 1145.0 | 1145.0 | 537.18 | False | None | None | False | None | False | 615071.1 | 0 | | 3856969 | 147506 | None | code11 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineerin- charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 89.0 | 89.0 | 328.62 | False | None | None | False | None | False | 29247.18 | 0 | | 3856970 | 147506 | None | code12 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, caffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Cum | 8211.0 | 8211.0 | 4.97 | False | None | None | False | None | False | 40808.67 | 0 | | 3856971 | 147506 | None | code13 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of aterials, labour, curing complete as per specifications and
as per directions of Engineer-in-charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 295.0 | 295.0 | 59.76 | False | None | None | False | None | False | 17629.2 | 0 | | 3856972 | 147506 | None | code14 | Providing & fixing false ceiling at all height including providing & fixing of framework made of
special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ m2
(both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick
with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener
12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25
x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger
fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to
which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each
having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate
channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction,
including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm
long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre,
with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to
ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three
layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Sqm | 1210.0 | 1210.0 | 72.74 | False | None | None | False | None | False | 88015.4 | 0 | | 3856973 | 147506 | None | code15 | Electric estimate :- Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws 25mm dia 2mm thick. with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Mtr | 106.0 | 106.0 | 129.12 | False | None | None | False | None | False | 13686.72 | 0 | | 3856974 | 147506 | None | code16 | Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box with all lead, lifts,loading & nloading charges including cost and conveyance of all aterials, labour, equipments,HOM of machinary and other ncidental charges required for successfull completion of ork etc.,complete as per specifications and as per the directions of the Engineer incharge of the work with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Each | 56.0 | 56.0 | 15.0 | False | None | None | False | None | False | 840.0 | 0 | | 3856975 | 147506 | None | code17 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copperwith low onductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. 2.5 sqmm with all lead, lifts, loading & unloadingcharges including cost and conveyance of all materials, labour, equipments, HOM of machinary andother incidental charges required for successfull completion of work etc., complete as per with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Mtr | 35.0 | 35.0 | 180.0 | False | None | None | False | None | False | 6300.0 | 0 | | 3856976 | 147506 | None | code18 | Supplying and fixing of porcelain fuse channel with cut out 16 Amps on existing wooden/panel usingnecessary nuts, bolts, and washers etc complee (32/3) with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Mtr | 138.0 | 138.0 | 1.0 | False | None | None | False | None | False | 138.0 | 0 | | 3856977 | 147506 | None | code19 | Supplying and fixing of T5 Fluorescent Tube with 28W power consumption with low 3mg Mercurycontent & below 40% glass content than T S lamp & 20% less phosphor coating thanT8 with initiallumenon 1350 (for3000-6500 deg Kelvin),rated Avg life(12Hr.Cycle)of greater than 35000 burringhours. Operating voltage range from 180V to 265V, 50Hz AC power Supply with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Each | 179.0 | 179.0 | 14.0 | False | None | None | False | None | False | 2506.0 | 0 | | 3856978 | 147506 | None | code20 | Supplyingandfixingsurface/flushmountingunbreakablePVCmodularboxsuitableformountingmodularswitchplateswithduegroovecuttinginBrick/C.Cwall,includingnecessaryrawlplugs,Machine/NF screws etc., complete with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Each | 103.0 | 103.0 | 8.0 | False | None | None | False | None | False | 824.0 | 0 | | 3856979 | 147506 | None | code21 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., foroperation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and withdouble ball bearing system. 48" Sweep (1200mm) Regular model with all lead, lifts, loading &unloading charges including cost and conveyance of all materials, labour, equipments, HOM ofmachinary and other incidental charges required for successfull completion of work etc., complete as with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Each | 2984.0 | 2984.0 | 10.0 | False | None | None | False | None | False | 29840.0 | 0 | | 3856980 | 147506 | None | code22 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixedon the top of the earth electrode. The funnel should be enclosed in a CC chamber of 00x400x400mmwith a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrodeshould be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of theCC chamber. The connection from the electrode is to be established through GI strip using GI boltsand nuts.with all lead, lifts, loading & unloading charges including cost and conveyance of allmaterials with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Nos | 3510.0 | 3510.0 | 1.0 | False | None | None | False | None | False | 3510.0 | 0 | | 3856981 | 147506 | None | code23 | Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes forcable/conduit entry as required with one coat of primer of approved make etc.200x200x65mm with alllead, lifts, loading & unloading charges including cost and conveyance of all materials, labour,equipments, HOM of machinary and other incidental charges required for successfull completion ofwork etc., complete as per specifications and as per the directions of the Engineer incharge of thework with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Nos | 179.0 | 179.0 | 8.0 | False | None | None | False | None | False | 1432.0 | 0 | | 3856982 | 147506 | None | code24 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephonesocket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A 6Amps 3waysocket. with all lead, lifts, loading & unloading charges including cost and conveyance of all materials,labour, equipments, HOM of machinary and other incidental charges required for successfullcompletion of work etc., complete as per specifications and as per the directions of the Engineerincharge of the work 6A Two Way Switch with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Nos | 166.0 | 166.0 | 22.0 | False | None | None | False | None | False | 3652.0 | 0 | | 3856983 | 147506 | None | code25 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephonesocket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A 6Amps 2waysocket. with all lead, lifts, loading & unloading charges including cost and conveyance of all materials,labour, equipments, HOM of machinary and other incidental charges required for successfullcompletion of work etc., complete as per specifications and as per the directions of the Engineerincharge of the work Stepped Fan Regulator Two Module with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work | Nos | 357.0 | 357.0 | 15.0 | False | None | None | False | None | False | 5355.0 | 0 |
|