createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724737949288 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 780.00 emd 46500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 10-09-2024 17:00:00 tenderQueryClose 02-09-2024 16:00:00 technicalBidOpen None publishedDate 27-08-2024 18:44:19 publishedByPost TP_CO_HNV publishedByUser KPE14812 - AESU S BANGALOR bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Umesh Madival splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9380753057 tenderSupplierList None
tenderSchedule	createdTs 1724737949320 version 4 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT23386 title Construction of 3TPD MRF centre at Honnavar. description Construction of 3TPD MRF centre at Honnavar. category WORKS categoryText Works ecv 3098842.67 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2426 locationName DMA Town Panchayat Honnavara provisionalAmount 3100000.0 groupOverheadTotal 472704.81 fileNumber tp/hnr/MRF/1
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724737949000 0 None None Buildings Construction of 3TPD MRF centre at Honnavar. 2626137.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3861605 147813 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete Cum 114.24 114.24 29.41 False None None False None False 3359.7984 0 3861606 147813 None 1.1.2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 6343.68 6343.68 28.97 False None None False None False 183776.4096 0 3861607 147813 None 2.3.2 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7776.0 7776.0 35.74 False None None False None False 277914.24 0 3861608 147813 None 2.3.2 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11016.0 11016.0 1.63 False None None False None False 17956.08 0 3861609 147813 None 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10264.32 10264.32 4.82 False None None False None False 49474.0224 0 3861610 147813 None 2.11 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Kg 100.19 100.19 2773.1 False None None False None False 277836.889 0 3861611 147813 None 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand Cum 7155.68 7155.68 16.67 False None None False None False 119285.1856 0 3861612 147813 None 1.8 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work Cum 530.88 530.88 128.79 False None None False None False 68372.0352 0 3861613 147813 None 6.33 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Sqm 1378.72 1378.72 13.66 False None None False None False 18833.3152 0 3861614 147813 None 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 330.4 330.4 187.56 False None None False None False 61969.824 0 3861615 147813 None 11.2 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge Kg 126.56 126.56 6130.0 False None None False None False 775812.8 0 3861616 147813 None 7.38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 636.16 636.16 518.21 False None None False None False 329664.4736 0 3861617 147813 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 112.0 112.0 187.56 False None None False None False 21006.72 0 3861618 147813 None 8.54.1 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat as per specifications and as per directions of Engineer in charge Sqm 81.76 81.76 91.08 False None None False None False 7446.7008 0 3861619 147813 None 8.75.2 Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (one coats applied @ 0.83 l/10 m²) including preparing the surface after thoroughly cleaning the surface to remove all dirt,dust and foreign matter , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 81.76 81.76 91.08 False None None False None False 7446.7008 0 3861620 147813 None 11.6.1 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 2948.96 2948.96 9.0 False None None False None False 26540.64 0 3861621 147813 None 1.8.4 Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Nos 27648.32 27648.32 1.0 False None None False None False 27648.32 0 3861622 147813 None 11.35.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. Kg 506.24 506.24 240.0 False None None False None False 121497.6 0 3861623 147813 None 1.1 LT Control Panel for PHE Equipments, like raw water, treated water, sump water lift pumps including starter control operating system.Completely made by CRCA fabricated, powder coated paint finished front openable compartment for all feeders requirement with IP-54.Incomer : MCCB TPN 63A with CBCT ELR & Ph indicators, meter section with all parameters as required 100A 4 Wire 25kA 415V Aluminium busbars compartment.Outgoings: 63A MCCB feeder- 01No Outgoings: 16A MPCB feeder - 01Nos Outgoings: 16A MPCB feeder - 02Nos Outgoings: 63/40A MCB feeder- 08Nos Nos 65000.0 65000.0 1.0 False None None False None False 65000.0 0 3861624 147813 None 1.2 Sub panel-1 Incomer : MCB TPN 63A with CBCT ELR & Ph indicators, section with all parameters as required 63A 4 Wire 16kA 415V Aluminium busbars compartment.Outgoings: 40/63A 4P MCB feeder- 10No.Outgoings: 32A Industrial socket-02Nos.Outgoings: 16A Industrial socket-02Nos. Nos 35000.0 35000.0 1.0 False None None False None False 35000.0 0 3861625 147813 None 1.3 LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 Ohms /Kms Max as per IS: 3975. Glands & Lugs not included 3.5Cx50 Sqmm Al Ar cable Rmtr 300.0 300.0 30.0 False None None False None False 9000.0 0 3861626 147813 None 1.4 4Cx25 Sqmm Al Ar cable Rmtr 180.0 180.0 20.0 False None None False None False 3600.0 0 3861627 147813 None 1.4 4Cx16 Sqmm Al Ar cable Rmtr 120.0 120.0 20.0 False None None False None False 2400.0 0 3861628 147813 None 1.5 4Cx10 Sqmm Cu Ar cable Rmtr 332.0 332.0 1.0 False None None False None False 332.0 0 3861629 147813 None 1.7 4Cx6.0 Sqmm Cu Ar cable Rmtr 256.0 256.0 1.0 False None None False None False 256.0 0 3861630 147813 None 1.8 3Cx6.0 Sqmm Cu Un Ar cable Rmtr 316.0 316.0 1.0 False None None False None False 316.0 0 3861631 147813 None 1.8 3Cx4.0 Sqmm Cu Un Ar cable Rmtr 300.0 300.0 1.0 False None None False None False 300.0 0 3861632 147813 None 3.1 Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.3.5Cx50 Sqmm Al Ar cable Set 200.0 200.0 2.0 False None None False None False 400.0 0 3861633 147813 None 3.2 4Cx25 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 3861634 147813 None 3.3 4Cx16 Sqmm Al Ar cable Set 67.2 67.2 2.0 False None None False None False 134.4 0 3861635 147813 None 3.4 4Cx10 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3861636 147813 None 3.5 4Cx6.0 Sqmm Cu Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3861637 147813 None 3.6 3Cx6.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3861638 147813 None 3.7 3Cx4.0 Sqmm Cu Un Ar cable Set 54.4 54.4 2.0 False None None False None False 108.8 0 3861639 147813 None 3.8 Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.70 Sqmm Al Ar cable (tinned copper lug) Set 250.0 250.0 2.0 False None None False None False 500.0 0 3861640 147813 None 3.9 25 Sqmm Al Ar cable (tinned copper lug) Set 16.0 16.0 2.0 False None None False None False 32.0 0 3861641 147813 None 3.10 16 Sqmm Al Ar cable (tinned copper lug) Set 9.95 9.95 2.0 False None None False None False 19.9 0 3861642 147813 None 3.11 10 Sqmm Cu Ar cable (tinned copper lug) Set 6.4 6.4 1.0 False None None False None False 6.4 0 3861643 147813 None 3.12 6.0 Sqmm Cu Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 3861644 147813 None 3.13 6.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 3861645 147813 None 3.14 4.0 Sqmm Cu Un Ar cable (tinned copper lug) Set 5.6 5.6 1.0 False None None False None False 5.6 0 3861646 147813 None 4.1 PVC conduits & Accessories Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fixing invrted wood plugs in case of RCC ceiling and RCC wall/stone structure or rawl plugs in case of brick wall & cement plastering the damaged portion using heavy gauage saddles at interval of 700mm using NF screws.19/20mm dia PVC 2mm thick conduit Rmtr 68.0 68.0 10.0 False None None False None False 680.0 0 3861647 147813 None 4.2 25mm dia PVC 2mm thick conduit Rmtr 80.0 80.0 10.0 False None None False None False 800.0 0 3861648 147813 None 5.1 Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for point wiring laid in existing conduit.1 Light point upto 3Mtr from switch board Nos 276.0 276.0 1.0 False None None False None False 276.0 0 3861649 147813 None 5.2 1 Light point above 3M upto 6Mtr from switch board Nos 386.0 386.0 1.0 False None None False None False 386.0 0 3861650 147813 None 5.3 1 Light point above 6M upto 10Mtr from switch board Nos 567.0 567.0 1.0 False None None False None False 567.0 0 3861651 147813 None 5.4 2 Light point above 3Mtr upto 6Mtr from switch board Nos 721.0 721.0 1.0 False None None False None False 721.0 0 3861652 147813 None 5.5 2 Light point above 6Mtr upto 10Mtr from switch board Nos 721.0 721.0 1.0 False None None False None False 721.0 0 3861653 147813 None 5.6 3 Light point above 6Mtr upto 10Mtr from switch board Nos 1054.0 1054.0 3.0 False None None False None False 3162.0 0 3861654 147813 None 6.1 Circuit main wiring Supply & wiring from distribution board to looping switch boards. Laid wire size 2x2.5 Sqmm Ph-N & 1x1.5Sqmm for E for Lighting circuit wiring laid in existing conduit.1.0 Sqmm Cu FRLS wire Rmtr 18.0 18.0 300.0 False None None False None False 5400.0 0 3861655 147813 None 6.2 1.5 Sqmm Cu FRLS wire Rmtr 26.0 26.0 300.0 False None None False None False 7800.0 0 3861656 147813 None 6.3 2.5 Sqmm Cu FRLS wire Rmtr 40.0 40.0 300.0 False None None False None False 12000.0 0 3861657 147813 None 6.4 4.0 Sqmm Cu FRLS wire Rmtr 59.0 59.0 50.0 False None None False None False 2950.0 0 3861658 147813 None 6.5 6.0 Sqmm Cu FRLS wire Rmtr 115.0 115.0 50.0 False None None False None False 5750.0 0 3861659 147813 None 7.1 Switches & sockets outlets in Existing modular box 6A one way switch Nos 88.0 88.0 4.0 False None None False None False 352.0 0 3861660 147813 None 7.2 6A 5Pin socket Nos 162.0 162.0 2.0 False None None False None False 324.0 0 3861661 147813 None 7.3 Stepped fan regulator Nos 313.0 313.0 2.0 False None None False None False 626.0 0 3861662 147813 None 7.4 6/16A Universal socket Nos 249.0 249.0 2.0 False None None False None False 498.0 0 3861663 147813 None 8.1 Supply & fixing of 50W LED light fixture IP 65, included screws accessoris Etc.Considered outdoor type light fitting for equivalent. Nos 7390.0 7390.0 8.0 False None None False None False 59120.0 0 3861664 147813 None 9.1 Earthing 25x6mm GI Earth Strip Rmtr 92.0 92.0 60.0 False None None False None False 5520.0 0 3861665 147813 None 9.2 8.0 SWG GI bare wire Rmtr 15.2 15.2 50.0 False None None False None False 760.0 0 3861666 147813 None 10.1 Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall.Supply & installation of GI Ladder type cable tray 300x50mm Rmtr 400.0 400.0 10.0 False None None False None False 4000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724737950000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1724737950000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724737950000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1724737950000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724737950000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1724737950000 0 None None ELIGIBILITY Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None 1724737950000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None 1724737950000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1724737950000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1724737950000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1724737950000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1724737950000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1724737950000 0 None None ELIGIBILITY Banker Details for reference None 1724737950000 0 None None ELIGIBILITY Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None 1724737950000 0 None None ELIGIBILITY Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None 1724737950000 0 None None ELIGIBILITY Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None 1724737950000 0 None None ELIGIBILITY Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached) None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Line of credit True Technical Bid Pan card True Technical Bid GST Registration True Technical Bid Work done certificate True Technical Bid PWD Registration Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None