| 3865129 | 148036 | None | code01 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such simillar works as per drawing and technical specification, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth (PWD SR 2023-24 Vol-1 I.No. 1.5.1 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 299.0 | 299.0 | 50.58 | False | None | None | False | None | False | 15123.42 | 0 |
| 3865130 | 148036 | None | code02 | Filling in foundations with granite/ trap broken metal 100mm. and down size, with approved sand Including hand packing, ramming watering. Including cost of all materials and labour with lead upto 50m. and lift of 1.5m.complete as per specifications. specification. (PWD SR 2023-24 Vol - 1 IT NO - ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 2682.0 | 2682.0 | 11.58 | False | None | None | False | None | False | 31057.56 | 0 |
| 3865131 | 148036 | None | code03 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggrregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost od steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol-1, I.No. 2.1.3 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 5989.0 | 5989.0 | 10.1 | False | None | None | False | None | False | 60488.9 | 0 |
| 3865132 | 148036 | None | code04 | Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR 2023-24 Vol-2, I.No. 5.2 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 6018.0 | 6018.0 | 9.1 | False | None | None | False | None | False | 54763.8 | 0 |
| 3865133 | 148036 | None | code05 | Providing Coursed rubble masonry (second sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR 2023-24 Vol-2, I.No. 5.2 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 6205.0 | 6205.0 | 6.5 | False | None | None | False | None | False | 40332.5 | 0 |
| 3865134 | 148036 | None | code06 | Providing and laying in position Reinforced cement concrete for all super structures of building, Irrigation works, Super structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.2-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2021-22 Vol-1,P.No. 16, I.No. 2.5.1 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 7118.1 | 7118.1 | 23.47 | False | None | None | False | None | False | 167061.807 | 0 |
| 3865135 | 148036 | None | code07 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (PWD SR 2023-24 Vol-1, I.No .) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Tonne | 89457.0 | 89457.0 | 1.34 | False | None | None | False | None | False | 119872.38 | 0 |
| 3865136 | 148036 | None | code08 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work (PWD SR 2023-24 Vol-2,P.No. 13, I.No. 6.2 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 7978.0 | 7978.0 | 10.21 | False | None | None | False | None | False | 81455.38 | 0 |
| 3865137 | 148036 | None | code09 | Providing 12mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 fine sand ) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete work as per specification and the direction of engineer incharge of work(PWD SR 2023-24 Vol-2, I.No. 8.4.1 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Sqm | 323.0 | 323.0 | 163.23 | False | None | None | False | None | False | 52723.29 | 0 |
| 3865138 | 148036 | None | code10 | Providing and fixing chlorinated polyvinyl chloride (CPVC) Pipe having thermal stability for hot & cold water supply including all cpvc plain & brass threated fittings including fixing the pipe with clamps at ,.00 m spacing this including joining of pipes & fitting with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge , 50mm nominal dia pipes(PWD SR 2023-24 Vol-2,, I.No. 13.31.6, ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 767.0 | 767.0 | 27.0 | False | None | None | False | None | False | 20709.0 | 0 |
| 3865139 | 148036 | None | code11 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials,labour, curing, polishing complete as per specifications.(PWD SR 2023-24 Vol-2, I.No. 9.36 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Sqm | 1650.0 | 1650.0 | 23.86 | False | None | None | False | None | False | 39369.0 | 0 |
| 3865140 | 148036 | None | code12 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24 Vol-2, I.No. 8.33.1) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Sqm | 158.0 | 158.0 | 341.74 | False | None | None | False | None | False | 53994.92 | 0 |
| 3865141 | 148036 | None | code13 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specification (PWD SR 2023-24 Vol-2, I.No. 12.12 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 124202.0 | 124202.0 | 0.23 | False | None | None | False | None | False | 28566.46 | 0 |
| 3865142 | 148036 | None | code14 | Providing and fixing in position Mathi/Nandi wood fully panelled shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specification (excluding cost of fixtures) (PWD SR 2023-24 Vol-2,I.No. 12.21 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Sqm | 5742.0 | 5742.0 | 7.77 | False | None | None | False | None | False | 44615.34 | 0 |
| 3865143 | 148036 | None | code15 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specification and as per the direction of engineer incharge of work(PWD SR 2023-24 Vol-2, I.No. 8.34.1) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Sqm | 53.0 | 53.0 | 7.77 | False | None | None | False | None | False | 411.81 | 0 |
| 3865144 | 148036 | None | code16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specification and as per the direction of engineer incharge of work(PWD SR 2023-24 Vol-2 I.No. 8.41) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Kg | 167.0 | 167.0 | 7.77 | False | None | None | False | None | False | 1297.59 | 0 |
| 3865145 | 148036 | None | code17 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.(PWD SR 2023-24 Vol-2, I.No. 11.34B) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Sqm | 183.0 | 183.0 | 92.61 | False | None | None | False | None | False | 16947.63 | 0 |
| 3865146 | 148036 | None | code18 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (PWD SR 2023-24 Vol-2,P.No. I.No. 15.1 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Sqm | 817.0 | 817.0 | 23.86 | False | None | None | False | None | False | 19493.62 | 0 |
| 3865147 | 148036 | None | code19 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete.(PWD SR 2023-24 Vol-2,P.No.85, I.No. 11.44) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 4345.0 | 4345.0 | 4.32 | False | None | None | False | None | False | 18770.4 | 0 |
| 3865148 | 148036 | None | code20 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredW.C. pan with ISI marked white solid plastic seat and lid :(PWD SR 2023-24 Vol-2, I.No. 14.3.1 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Sqm | 5977.0 | 5977.0 | 2.0 | False | None | None | False | None | False | 11954.0 | 0 |
| 3865149 | 148036 | None | code21 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. (PWD SR 2023-24 Vol-2,P.No.71, I.No. 10.14) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Cum | 1106.0 | 1106.0 | 54.54 | False | None | None | False | None | False | 60321.24 | 0 |
| 3865150 | 148036 | None | code22 | Providing and fixing chlorinated polyvinyl chloride (CPVC) Pipe having thermal stability for hot & cold water supply including all cpvc plain & brass threated fittings including fixing the pipe with clamps at ,.00 m spacing this including joining of pipes & fitting with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge , 50mm nominal dia pipes(PWD SR 2023-24 Vol-2,, I.No. 13.31.6, ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Sqm | 767.0 | 767.0 | 50.0 | False | None | None | False | None | False | 38350.0 | 0 |
| 3865151 | 148036 | None | code23 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (PWD SR 2023-24 Vol-2 I.No. 9.10) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 1106.0 | 1106.0 | 3.24 | False | None | None | False | None | False | 3583.44 | 0 |
| 3865152 | 148036 | None | code08 | POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. point wiring using class A Materials Short point upto 3 mts from tapping point to out let via switch box ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 157.0 | 157.0 | 2.0 | False | None | None | False | None | False | 314.0 | 0 |
| 3865153 | 148036 | None | code09 | Medium point above 3 mts upto 6mts from tapping point to outlet via switch box ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 245.0 | 245.0 | 2.0 | False | None | None | False | None | False | 490.0 | 0 |
| 3865154 | 148036 | None | code10 | Long point above 6 mts upto 10 mts from tapping point to outlet via switch box ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 368.0 | 368.0 | 2.0 | False | None | None | False | None | False | 736.0 | 0 |
| 3865155 | 148036 | None | code11 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 1 - 3Way ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 93.0 | 93.0 | 2.0 | False | None | None | False | None | False | 186.0 | 0 |
| 3865156 | 148036 | None | code12 | 4 - 5Way ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 103.0 | 103.0 | 2.0 | False | None | None | False | None | False | 206.0 | 0 |
| 3865157 | 148036 | None | code13 | 6 Way ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 123.0 | 123.0 | 4.0 | False | None | None | False | None | False | 492.0 | 0 |
| 3865158 | 148036 | None | code14 | 8 Way ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 142.0 | 142.0 | 2.0 | False | None | None | False | None | False | 284.0 | 0 |
| 3865159 | 148036 | None | code15 | 10 / 12 Way ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 162.0 | 162.0 | 1.0 | False | None | None | False | None | False | 162.0 | 0 |
| 3865160 | 148036 | None | code16 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws Ding Donng bell ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 216.0 | 216.0 | 1.0 | False | None | None | False | None | False | 216.0 | 0 |
| 3865161 | 148036 | None | code17 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ... mm dia ..mm thick with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 20 mm dia 2 mm thick ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | MT | 39.0 | 39.0 | 40.0 | False | None | None | False | None | False | 1560.0 | 0 |
| 3865162 | 148036 | None | code18 | Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe ... mm dia ..mm thick with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia 2 mm thick ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | MT | 50.0 | 50.0 | 40.0 | False | None | None | False | None | False | 2000.0 | 0 |
| 3865163 | 148036 | None | code19 | Supplying and fixing PVC/metal conduit deep junction box .19/20mm deep junction box 25mm deep junction box ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 42.0 | 42.0 | 15.0 | False | None | None | False | None | False | 630.0 | 0 |
| 3865164 | 148036 | None | code20 | 25mm deep junction box ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 46.0 | 46.0 | 5.0 | False | None | None | False | None | False | 230.0 | 0 |
| 3865165 | 148036 | None | code21 | WIRING FOR Lighting/Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments. 1.5 Sq.mm ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | MT | 20.0 | 20.0 | 50.0 | False | None | None | False | None | False | 1000.0 | 0 |
| 3865166 | 148036 | None | code22 | 2.5 sq.mm ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | MT | 31.0 | 31.0 | 30.0 | False | None | None | False | None | False | 930.0 | 0 |
| 3865167 | 148036 | None | code23 | 4 sq.mm ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | MT | 4.0 | 4.0 | 15.0 | False | None | None | False | None | False | 60.0 | 0 |
| 3865168 | 148036 | None | code24 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 8Way SP & N ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 1421.0 | 1421.0 | 1.0 | False | None | None | False | None | False | 1421.0 | 0 |
| 3865169 | 148036 | None | code25 | Supplying and fixing 6 to 32 Amps SP miniature circuit breaker 10 Ka,with C curve, on the existing MCB distribution board using necessary fixing materials and wiring complete as required ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 425.0 | 425.0 | 3.0 | False | None | None | False | None | False | 1275.0 | 0 |
| 3865170 | 148036 | None | code26 | Supplying and fixing 40A DP MCB miniature circuit breaker 10 Ka,with C curve,on the existing MCB distribution board using necessary fixing materials and wiring complete as required ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 1309.0 | 1309.0 | 1.0 | False | None | None | False | None | False | 1309.0 | 0 |
| 3865171 | 148036 | None | code27 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 40Amps 2 pole ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 3773.0 | 3773.0 | 1.0 | False | None | None | False | None | False | 3773.0 | 0 |
| 3865172 | 148036 | None | code28 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 1.5 sq.mm ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 3.0 | 3.0 | 10.0 | False | None | None | False | None | False | 30.0 | 0 |
| 3865173 | 148036 | None | code29 | 2.5 sq.mm ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 4.0 | 4.0 | 20.0 | False | None | None | False | None | False | 80.0 | 0 |
| 3865174 | 148036 | None | code30 | 4 sq.mm ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 7.0 | 7.0 | 40.0 | False | None | None | False | None | False | 280.0 | 0 |
| 3865175 | 148036 | None | code31 | 6 sq.mm ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 7.0 | 7.0 | 10.0 | False | None | None | False | None | False | 70.0 | 0 |
| 3865176 | 148036 | None | code32 | Supplying and fixing of Class A (medium duty) GI Pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV class. 40mm ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 328.0 | 328.0 | 1.0 | False | None | None | False | None | False | 328.0 | 0 |
| 3865177 | 148036 | None | code33 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 4067.0 | 4067.0 | 1.0 | False | None | None | False | None | False | 4067.0 | 0 |
| 3865178 | 148036 | None | code34 | Supplying and running of GI Strip of size 25 x 3mm for grounding connections using necessary fixing materials as required ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Rmtr | 74.0 | 74.0 | 10.0 | False | None | None | False | None | False | 740.0 | 0 |
| 3865179 | 148036 | None | code35 | Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 2X 4-20/22watts ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 613.0 | 613.0 | 1.0 | False | None | None | False | None | False | 613.0 | 0 |
| 3865180 | 148036 | None | code36 | LED light fighting 4'-20/22watts ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 368.0 | 368.0 | 2.0 | False | None | None | False | None | False | 736.0 | 0 |
| 3865181 | 148036 | None | code37 | LED light fighting 2'-9/10watts ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 245.0 | 245.0 | 4.0 | False | None | None | False | None | False | 980.0 | 0 |
| 3865182 | 148036 | None | code38 | Supplying exhaust fan of 1440 RPM of 300mm(12") size with Bracket blades complete for light duty suitable to operate on 230V,50Hz, A.C.,supply ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 1176.0 | 1176.0 | 2.0 | False | None | None | False | None | False | 2352.0 | 0 |
| 3865183 | 148036 | None | code39 | Fixing all types and all capacities fluorescent / false ceiling /spot light / CFL / LED fitting indoors on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires . Required nos of round blocks and clamps ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 108.0 | 108.0 | 5.0 | False | None | None | False | None | False | 540.0 | 0 |
| 3865184 | 148036 | None | code40 | Fixing of Wall/ ceiling fan of all capacities and all types to the existing hook together with supplying and fixing a 5 A ceiling rose , necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring complete ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 147.0 | 147.0 | 5.0 | False | None | None | False | None | False | 735.0 | 0 |
| 3865185 | 148036 | None | code41 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 Amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin cose wire of approved make ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 392.0 | 392.0 | 1.0 | False | None | None | False | None | False | 392.0 | 0 |
| 3865186 | 148036 | None | code42 | Fixing halogen/metal hallide/SVL / IL / LED flood light fitting over existing pole/wall ceiling including clamps,bolts, nuts and wiring using suitable capacity wires complete. ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work | Each | 172.0 | 172.0 | 1.0 | False | None | None | False | None | False | 172.0 | 0 |