createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1722274943038 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3280.00 emd 197000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 10-09-2024 16:00:00 tenderQueryClose 04-09-2024 11:00:00 technicalBidOpen 11-09-2024 16:30:00 publishedDate 27-08-2024 16:15:48 publishedByPost RDPR_EE_DIV_KPL publishedByUser KPE15445 - H SATHYAPPA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 20-08-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson EXECUTIVE ENGINEER PRE DIVISION KOPPAL splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08539220835 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1722274943081 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT6407 title Construction of 10 Rooms to Govt Higher Primary School at Gouripur Village of Gangavathi Taluka Under RIDF 28 Trench of The Year 2022-23 description Construction of 10 Rooms to Govt Higher Primary School at Gouripur Village of Gangavathi Taluka Under RIDF 28 Trench of The Year 2022-23 category WORKS categoryText Works ecv 13096054.89 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 948 locationName RDPR Division Office Koppal provisionalAmount 15727635.0 groupOverheadTotal None fileNumber EE/PRED/KPL/KKRDB/2023-24/KNK/23
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1722274943000 0 None None Buildings Construction of Class Rooms 6938149.53 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3641000 132618 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Sqm 107.1 107.1 500.0 False None None False None False 53550.0 0 3641001 132618 None 1.4.1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Cum 254.1 254.1 255.019 False None None False None False 64800.3279 0 3641002 132618 None 2.1.2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 35.04 False None None False None False 208389.888 0 3641003 132618 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6961.5 6961.5 26.325 False None None False None False 183261.4875 0 3641004 132618 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6961.5 6961.5 16.15 False None None False None False 112428.225 0 3641005 132618 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Cum 6961.5 6961.5 13.33 False None None False None False 92796.795 0 3641006 132618 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Cum 6961.5 6961.5 30.12 False None None False None False 209680.38 0 3641007 132618 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Cum 6961.5 6961.5 44.63 False None None False None False 310691.745 0 3641008 132618 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Cum 6961.5 6961.5 1.04 False None None False None False 7239.96 0 3641009 132618 None Market Rate Centering and Shuttering Charges Footing Cum 208.85 208.85 26.325 False None None False None False 5497.97625 0 3641010 132618 None Market Rate Centering and Shuttering Charges Coloumns Cum 4873.05 4873.05 16.15 False None None False None False 78699.7575 0 3641011 132618 None Market Rate Centering and Shuttering Charges Plinth Beams Cum 3480.75 3480.75 13.33 False None None False None False 46398.3975 0 3641012 132618 None Market Rate Centering and Shuttering Charges Beams Cum 4176.9 4176.9 30.12 False None None False None False 125808.228 0 3641013 132618 None Market Rate Centering and Shuttering Charges Chajja Cum 3132.68 3132.68 1.04 False None None False None False 3257.9872 0 3641014 132618 None Market Rate Centering and Shuttering Charges Slab Cum 3480.75 3480.75 40.91 False None None False None False 142397.4825 0 3641015 132618 None 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 52.632 False None None False None False 310084.0596 0 3641016 132618 None 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 56.57 False None None False None False 379497.0165 0 3641017 132618 None 2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Kg 93.93 93.93 12447.375 False None None False None False 1169181.93375 0 3641018 132618 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 279.3 279.3 137.94 False None None False None False 38526.642 0 3641019 132618 None 1.8 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 497.7 497.7 134.28 False None None False None False 66831.156 0 3641020 132618 None 6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8621.55 8621.55 79.344 False None None False None False 684068.2632 0 3641021 132618 None 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Sqm 1024.8 1024.8 21.39 False None None False None False 21920.472 0 3641022 132618 None 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specification Cum 130412.1 130412.1 2.67 False None None False None False 348200.307 0 3641023 132618 None 11.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 8689.8 8689.8 5.04 False None None False None False 43796.592 0 3641024 132618 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 593.25 593.25 124.02 False None None False None False 73574.865 0 3641025 132618 None 11.34b Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 192.15 192.15 914.13 False None None False None False 175650.0795 0 3641026 132618 None 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 52.5 52.5 97.95 False None None False None False 5142.375 0 3641027 132618 None 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 120.75 120.75 97.95 False None None False None False 11827.4625 0 3641028 132618 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1066.8 1066.8 8.0 False None None False None False 8534.4 0 3641029 132618 None 12.52 Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications No 811.65 811.65 21.0 False None None False None False 17044.65 0 3641030 132618 None 12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge Rmtr 333.9 333.9 17.1 False None None False None False 5709.69 0 3641031 132618 None 12.55.2 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges-do- with one side prelam Sqm 2142.0 2142.0 4.73 False None None False None False 10131.66 0 3641032 132618 None 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 221.55 221.55 357.5 False None None False None False 79204.125 0 3641033 132618 None 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 267.75 267.75 602.2 False None None False None False 161239.05 0 3641034 132618 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 371.0 371.0 449.9 False None None False None False 166912.9 0 3641035 132618 None 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 309.75 309.75 68.62 False None None False None False 21255.045 0 3641036 132618 None 2.1.4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 6527.85 6527.85 33.92 False None None False None False 221424.672 0 3641037 132618 None 9.35 Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1717.8 1717.8 372.16 False None None False None False 639296.448 0 3641038 132618 None 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 933.45 933.45 22.63 False None None False None False 21123.9735 0 3641039 132618 None 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications Sqm 1461.6 1461.6 17.48 False None None False None False 25548.768 0 3641040 132618 None 12.21 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 6029.1 6029.1 24.88 False None None False None False 150004.008 0 3641041 132618 None 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete No 126.0 126.0 8.0 False None None False None False 1008.0 0 3641042 132618 None 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 248.85 248.85 85.0 False None None False None False 21152.25 0 3641043 132618 None 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 136.5 136.5 151.0 False None None False None False 20611.5 0 3641044 132618 None 12.71.1 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.Nickel plated mild steel piano hinges 1 mm thick 35 mm wide No 312.9 312.9 150.0 False None None False None False 46935.0 0 3641045 132618 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge Sqm 105.0 105.0 818.39 False None None False None False 85930.95 0 3641046 132618 None 8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.85 143.85 1220.43 False None None False None False 175558.8555 0 3641047 132618 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 182.7 182.7 316.78 False None None False None False 57875.706 0 3641048 132618 None 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 55.65 55.65 141.85 False None None False None False 7893.9525 0 3641049 132618 None 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 144.9 144.9 141.85 False None None False None False 20554.065 0 1722274943000 0 None None Buildings FIRST FLOOR 5050390.83 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3641050 132619 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Cum 7031.12 7031.12 10.76 False None None False None False 75654.8512 0 3641051 132619 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Cum 7031.12 7031.12 30.43 False None None False None False 213956.9816 0 3641052 132619 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Cum 7031.12 7031.12 1.04 False None None False None False 7312.3648 0 3641053 132619 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Cum 7031.12 7031.12 51.528 False None None False None False 362299.55136 0 3641054 132619 None Market Rate Centering and Shuttering Charges Coloumns Cum 4921.78 4921.78 10.76 False None None False None False 52958.3528 0 3641055 132619 None Market Rate Centering and Shuttering Charges Beams Cum 4218.67 4218.67 30.43 False None None False None False 128374.1281 0 3641056 132619 None Market Rate Centering and Shuttering Charges Chajja Cum 3164.0 3164.0 1.04 False None None False None False 3290.56 0 3641057 132619 None Market Rate Centering and Shuttering Charges Slab Cum 3515.56 3515.56 51.528 False None None False None False 181149.77568 0 3641058 132619 None 2.11 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Kg 94.85 94.85 8907.2 False None None False None False 844847.92 0 3641059 132619 None 6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8707.77 8707.77 90.92 False None None False None False 791710.4484 0 3641060 132619 None 6.13 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1035.05 1035.05 15.0 False None None False None False 15525.75 0 3641061 132619 None 12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge Rmtr 337.24 337.24 17.1 False None None False None False 5766.804 0 3641062 132619 None 12.55.2 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges do- with one side prelam Sqm 21.42 21.42 3.15 False None None False None False 67.473 0 3641063 132619 None 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 270.43 270.43 1209.3 False None None False None False 327030.999 0 3641064 132619 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 1.0 1.0 273.15 False None None False None False 273.15 0 3641065 132619 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 106.05 106.05 1016.18 False None None False None False 107765.889 0 3641066 132619 None 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 131716.22 131716.22 2.26 False None None False None False 297678.6572 0 3641067 132619 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Kg 599.18 599.18 72.72 False None None False None False 43572.3696 0 3641068 132619 None 11.34b Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 194.07 194.07 829.7 False None None False None False 161019.879 0 3641069 132619 None 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 53.03 53.03 88.9 False None None False None False 4714.367 0 3641070 132619 None 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 121.96 121.96 85.86 False None None False None False 10471.4856 0 3641071 132619 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1077.47 1077.47 6.0 False None None False None False 6464.82 0 3641072 132619 None 12.52 Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications No 819.77 819.77 20.0 False None None False None False 16395.4 0 3641073 132619 None 12.21 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 6089.39 6089.39 20.79 False None None False None False 126598.4181 0 3641074 132619 None 12.32 Providing and fixing in position Mathi / Nandi wood fully panelled shutters for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) Sqm 6195.44 6195.44 36.0 False None None False None False 223035.84 0 3641075 132619 None 8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 145.29 145.29 1315.49 False None None False None False 191127.5421 0 3641076 132619 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 184.53 184.53 269.79 False None None False None False 49784.3487 0 3641077 132619 None 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete No 127.26 127.26 6.0 False None None False None False 763.56 0 3641078 132619 None 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 251.34 251.34 78.0 False None None False None False 19604.52 0 3641079 132619 None 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 137.87 137.87 141.0 False None None False None False 19439.67 0 3641080 132619 None 12.71.1 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete Nickel plated mild steel piano hinges 1 mm thick 35 mm wide No 316.03 316.03 138.0 False None None False None False 43612.14 0 3641081 132619 None 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 56.21 56.21 127.78 False None None False None False 7182.5138 0 3641082 132619 None 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 146.35 146.35 127.78 False None None False None False 18700.603 0 3641083 132619 None 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 942.78 942.78 22.63 False None None False None False 21335.1114 0 3641084 132619 None 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications Sqm 1476.22 1476.22 17.48 False None None False None False 25804.3256 0 3641085 132619 None 9.35 Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1734.98 1734.98 371.82 False None None False None False 645100.2636 0 1722274943000 0 None None Buildings HEAD ROOM AND PARAPET 590079.93 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3641086 132620 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7100.73 7100.73 1.24 False None None False None False 8804.9052 0 3641087 132620 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7100.73 7100.73 1.74 False None None False None False 12355.2702 0 3641088 132620 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7100.73 7100.73 2.48 False None None False None False 17609.8104 0 3641089 132620 None Basic Rate Centering and Shuttering Charges Coloumns Cum 4918.9 4918.9 1.24 False None None False None False 6099.436 0 3641090 132620 None Market Rate Centering and Shuttering Charges Cum 4216.2 4216.2 1.74 False None None False None False 7336.188 0 3641091 132620 None Basic Rate Centering and Shuttering Charges Slab Cum 3513.5 3513.5 2.48 False None None False None False 8713.48 0 3641092 132620 None 2.11 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Kg 95.81 95.81 518.7 False None None False None False 49696.647 0 3641093 132620 None 6.7 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8793.98 8793.98 34.66 False None None False None False 304799.3468 0 3641094 132620 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 397.34 397.34 249.54 False None None False None False 99152.2236 0 3641095 132620 None 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 133020.34 133020.34 0.08 False None None False None False 10641.6272 0 3641096 132620 None 12.21 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures Sqm 6149.68 6149.68 2.52 False None None False None False 15497.1936 0 3641097 132620 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 186.35 186.35 194.38 False None None False None False 36222.713 0 3641098 132620 None 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete No 253.83 253.83 2.0 False None None False None False 507.66 0 3641099 132620 None 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete No 139.23 139.23 2.0 False None None False None False 278.46 0 3641100 132620 None 12.71.1 roviding M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.Nickel plated mild steel piano hinges 1 mm thick 35 mm wide No 319.16 319.16 3.0 False None None False None False 957.48 0 3641101 132620 None 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 56.76 56.76 5.67 False None None False None False 321.8292 0 3641102 132620 None 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 147.8 147.8 5.67 False None None False None False 838.026 0 3641103 132620 None 8.25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 146.73 146.73 69.84 False None None False None False 10247.6232 0 1722274943000 0 None None Buildings Electrical Work 319798.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3641104 132621 None 1.2.1 Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick Mtr 66.0 66.0 600.0 False None None False None False 39600.0 0 3641105 132621 None 1.3.2 Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25 mm dia 2 mm thick Mtr 79.0 79.0 450.0 False None None False None False 35550.0 0 3641106 132621 None 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box Mtr 56.0 56.0 40.0 False None None False None False 2240.0 0 3641107 132621 None 1.6.3 Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 10" x 7" x 3" (254 x 178 x 76 mm) Each 112.0 112.0 40.0 False None None False None False 4480.0 0 3641108 132621 None 1.13 Supplying And Fixing Metal Fan Box with Round Hook. No 117.0 117.0 20.0 False None None False None False 2340.0 0 3641109 132621 None 2.1.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Point wiring using Copper wire without switch. Point 285.0 285.0 20.0 False None None False None False 5700.0 0 3641110 132621 None 2.1.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 394.0 394.0 20.0 False None None False None False 7880.0 0 3641111 132621 None 2.1.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 570.0 570.0 20.0 False None None False None False 11400.0 0 3641112 132621 None 2.5.2 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 3C x 1.5 mm2 Mtr 72.0 72.0 600.0 False None None False None False 43200.0 0 3641113 132621 None 2.5.3 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 4C x 1.5 mm Mtr 94.0 94.0 600.0 False None None False None False 56400.0 0 3641114 132621 None 3.1.1 Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854 Each 128.0 128.0 60.0 False None None False None False 7680.0 0 3641115 132621 None 3.14.2 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Two Way Switch No 70.0 70.0 20.0 False None None False None False 1400.0 0 3641116 132621 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Each 137.0 137.0 60.0 False None None False None False 8220.0 0 3641117 132621 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 175.0 175.0 60.0 False None None False None False 10500.0 0 3641118 132621 None 3.8 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws Sqm 0.41 0.41 10000.0 False None None False None False 4100.0 0 3641119 132621 None 6.3.2 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 56" Sweep (1400 mm) Regular model Each 3031.0 3031.0 20.0 False None None False None False 60620.0 0 3641120 132621 None 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders Each 122.0 122.0 50.0 False None None False None False 6100.0 0 3641121 132621 None 13.11 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 315.0 315.0 20.0 False None None False None False 6300.0 0 3641122 132621 None 5.18.8 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40 A TPN Each 3044.0 3044.0 2.0 False None None False None False 6088.0 0 1722274943000 0 None None Buildings WATER SUPPLY 197636.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3641123 132622 None 13.34 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately l 9.5 9.5 2000.0 False None None False None False 19000.0 0 3641124 132622 None 13.31.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes 32 MM Mtr 420.0 420.0 140.0 False None None False None False 58800.0 0 3641125 132622 None 13.31.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes Mtr 254.1 254.1 140.0 False None None False None False 35574.0 0 3641126 132622 None 13.2.2 Providing and fixing brass bib cock of approved quality 20 mm nominal bore Each 320.3 320.3 16.0 False None None False None False 5124.8 0 3641127 132622 None 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5128.2 5128.2 6.0 False None None False None False 30769.2 0 3641128 132622 None 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 1400.0 1400.0 4.0 False None None False None False 5600.0 0 3641129 132622 None 14.5.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Each 9074.1 9074.1 4.0 False None None False None False 36296.4 0 3641130 132622 None 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 3236.1 3236.1 2.0 False None None False None False 6472.2 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1722274945000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1722274945000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1722274945000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1722274945000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1722274945000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1722274949000 0 None None ELIGIBILITY The agency shall furnish affidavit stating that existing commitments furnished by him are true.If found falls action shall be taken as per rules None 1722274955000 0 None None ELIGIBILITY The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing KPP portal None 1722274960000 0 None None ELIGIBILITY As per Karnataka State Government order No. L D/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007a sum amounting to 1% of the bill amount will be deducted towards Construction Labor Welfare fund None 1722274966000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason. None 1722274972000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1722274977000 0 None None ELIGIBILITY Financial Year will be reckoned as the period between first day of April andThirty first day of March of succeeding year. (both days inclusive) None 1722274983000 0 None None ELIGIBILITY The Item Rates quoted shall include cost of Royalty charges on constructive materials & other taxes as per the prevailing Government Orders at the time of execution and including cost and conveyance of all materials, curing, loading and unloading, with all leads & lifts, labour, hire charges of all machineries & equipments and all incidental charges etc.complete necessary for completion of work. All the Items shall be executed as directed by the Engineer-in-charge of the work None 1722274990000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentionedin Clause 3 -Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation None 1722275004000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computerwell in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end. None 1722275010000 0 None None ELIGIBILITY The tenderer shall furnish required information in all prescribed formats.Scan & upload all the original documents/Formats required for this bid to2 of 17 the KPPP portal. The Original documents/ Formats shall be produced atthe time of opening of technical bid for physical verification None 1722275020000 0 None None ELIGIBILITY The tenderer shall note that the scanned Documents shall also be uploaded in the tasks created under Document/ Evidence required from the bidder None 1722275026000 0 None None ELIGIBILITY All materials required for this work shall be procured by the bidder him self and should got tested by the quality control authorities at his own cost before use on the work. None 1722275032000 0 None None ELIGIBILITY The intending contractors are requested to note that they should abide bythe detailed instructions and conditions contained in the standard bid document KW4 None 1722275038000 0 None None ELIGIBILITY The KPWD Code, KTTP Act/ Rules, Delegation of powers and other Government orders issued by Government from time to time will apply. None 1722275044000 0 None None ELIGIBILITY If the office happens to be closed on the dates notified, next working day will holds good None 1722275054000 0 None None ELIGIBILITY The field laboratory shall preferably locate, adjacent to the site with therequired amenity as per the clause. Failing which 1% of the amount of work done will be penalized None 1722275060000 0 None None ELIGIBILITY If undue delay caused by the contractor, the progressive damages caused to road will be assessed and make good at the cost and risk of the contractor. In addition, suitable action will be initiated against the contractor for the damage occurred during the undue delay period in accordance with the Karnataka Highway act 1964. None 1722275066000 0 None None ELIGIBILITY All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity till completion. Contractor should indemnify the client to that extent. None 1722275073000 0 None None ELIGIBILITY Contractor should follow strictly the prevailing rules of labour act and applicable any law as concerned. None 1722275082000 0 None None ELIGIBILITY 18%GST shall be paid to the tendered amount separately. None 1722275089000 0 None None ELIGIBILITY The increase in GST shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1722275096000 0 None None ELIGIBILITY Any dispute or difference or claim arising out of, or in connection with, or relating to the present contract or the breach, termination or invalidity thereof shall be referred and settled under the Arbitration Centre -Karnataka (Domestic & International) Rules 2012, by one or more arbitrators appointed in accordance with its rules None 1722275101000 0 None None ELIGIBILITY The tenderers shall note that as per the Government Order No.FD/850/EXP-12/15 dated 29-12-2015 and GO No.FD/130/EXP-12/15 dated 8-9-2015 & GO no 850-12/15 Dated 15-12-2016 the exemption from payment of EMD for Micro and small enterprises registered with NSIC under single point vendor registration scheme is applicable only for purchases, but not for works None 1722275105000 0 None None ELIGIBILITY Contractor should follow strictly the prevailing rules of labour act and applicable any other law as concerned to work. In case of any mishap, accidents are cause of death it is the duty of the contractor to settle the 3 of 17 dispute at is own cost. In no way department is held responsible None 1722275110000 0 None None ELIGIBILITY construction materials (Minerals Metal, Sand and Murum, etc.,) shall be bought from the authorized quarries along with the mineral dispatch permit or else 5 times the royalty will be deducted as penalty as per the Directions on the Director, Mines and Geology Department Bangalore Proceedings Dated 25-03-2013 None 1722275116000 0 None None ELIGIBILITY The defect liability period is one (1) years from the date of actual completion of work None 1722275124000 0 None None ELIGIBILITY Financial turn over and Financial commitments of previous years shall be given weight age of 10% per year to bring them to the price level of 2024-25 in the technical qualification criteria None 1722275130000 0 None None ELIGIBILITY As per Govt circular no GO-FD/AE 263/EXP12-2022 dt-11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the required machineries for various activities involved in construction as per MORTH specification None 1722275134000 0 None None ELIGIBILITY The tender period for completion of work is Nine (09) Calendar months.(Including monsoon period) None 1722275140000 0 None None ELIGIBILITY The tenderer has to quote the rates are exclusive of GST and As per Government CIRCULAR NO:FD/447/EXPENDITURE None 1722275145000 0 None None ELIGIBILITY Estimate rates are excluding GST and the prevailing GST 18 percent ofAPT is added in the form of Lumpsum in santioned estimate as per the guidelines in common SR 2021-22 GO PWD51 RDF 2019 Bengaluru dt 18-03-2022. Therefore, APT or ECV is excluding GST. In kppp portal there is no option to add GST separately over and above APT during DTSprocess. Hence even through the tender has been invited by opting for the INCLUSIVE option, the item wise rates do not include GST. Hence GST will be paid separately for the quoted amount as per the Govt. circular no FD/447/expenditur /12/2022/dt -30-07-2022. Therefore GST declaration certificate must be uploaded mandatorily by the prospective bidders. None 1722275152000 0 None None ELIGIBILITY All necessary arrangements shall be made and precaution taken to prevent completely or partially, damage to the structure or labours / employees during construction period. (As per recent Labour Act) Contractor shall be fully responsible for any damage to the structure during the construction and maintainance period.Any damage caused due to any reasons shall be rectified / replaced at his own cost as per the direction of Engineer in charge. Nothing shall be payable by the Department on account of inclusive of all such arrangements/ precautions work needed. None 1722275221000 0 None None ELIGIBILITY The Earnest Money Deposit Rs:1,97,000.00 through KPPP portal OR it shallbe in two parts. Part (1) Rs. 1,00,000.00 through KPPP portal under anyone of the option(CC/DD/NEFT/OTC) and Part (2) Balance EMD of Rs.97,000.00shall be in favour of the Executive Engineer, PWD Division Koppal, in the form of Bank Guarantee in the prescribed format obtained from any Nationalized/Scheduled Bank. The scanned copy of the original Part(2) EMD should be uploaded along with the Technical bid. The part (2)of the EMD shall be delivered to the Executive Engineer before the prescribed Date and time of opening of the Technical Bids None 1722275227000 0 None None ELIGIBILITY The contractor shall bound to comply the prevailing rules and regulations with regard to the EPF rules None 1722275234000 0 None None ELIGIBILITY Above Tender amount will not be given. None 1722275239000 0 None None ELIGIBILITY Star rate applicable as per Go No PWD 159 CRM 2009 Dated 30-09-2010 None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None List of existing commitments and ongoing works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- List of existing commitments and ongoing works None None None None As per Clause 3.2(c) To qualify for award of this contract, each Tenderer in its Name should have in the last five years i.e., 2019-20, 2020-21, 2021-22 2022-23 and 2023-24 (c) executed in any one year, the following minimum quantities of work a)Earth Work/Embankment 711.4392 CUm 2) PCC/RCC 239.768 Cum 3) Steel 17498.616 Kg 4) SSM/BBM 251.29 Cum 5) Plastering 2568.168 Sqm & 6) Flooring 333.936 Sqm Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None Satisfactoriy completed (atleast 50%) as prime contractor at-least one such similar work of value not less than Rs. 65.50 lakhs (50% of estimated cost of tender) Building Road Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None List of works for which tenders already submitted Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- List of works for which tenders already submitted None None None None Banker Details for reference Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Banker Details for reference None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded Capabilities of Vendor None None None None None The defect liability period is one (1) years from the date of actual completion of work Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Satisfactory Performance Certificate None None None None List of Financial Resources with Certificates Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs.262.00Lakhs) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs.43.65 Lakhs (estimated cash flow for 3 months of peak construction period) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None List of Financial Resources with Certificates Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN)
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid Quantity Wise Work Done Certificate True Technical Bid PWD Registration Certificate True Technical Bid Similar Nature Workdone certificate issued by not below the rank of executive engineer True Technical Bid Liquid assets and /or availability of credit facilities of no less than Rs.43.65 Lakhs True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1723814939000 version 0 createdDate None modifiedDate None blockNumber OFFICE OF PRE DIVISION KOPPAL JAWAHAR ROAD street None city KOPPAL state Karnataka pin 583231
tenderRecallDTO	None