3875199 | 148636 | None | code01 | Providing Coursed rubble masonry (second sort) with hard stone in
foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6515.25 | 6515.25 | 7.43 | False | None | None | False | None | False | 48408.3075 | 0 |
3875200 | 148636 | None | code02 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 14.58 | False | None | None | False | None | False | 4072.194 | 0 |
3875201 | 148636 | None | code03 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The graniteor traporbasalt crushed graded coarse aggregates and fne aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifcations. (The cost of steel reinforcement and formwork shall be paid separately) | Cum | 6527.85 | 6527.85 | 3.47 | False | None | None | False | None | False | 22651.6395 | 0 |
3875202 | 148636 | None | code04 | Fixing of door frame in an existing opening including embedding frame in
floor and walls after cutting masonry for holdfasts for embedding holdfast
in cement concrete 1:3:6 of 20mm and down size granite metal painting
two coats of coal tar to sides of frame, making good the damages to walls
and floor as required and disposal of the debris with lead upto 50 m.
including cost of materials, labour charges, complete as per specifications. | Cum | 1066.8 | 1066.8 | 70.4 | False | None | None | False | None | False | 75102.72 | 0 |
3875203 | 148636 | None | code05 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work | Cum | 9317.7 | 9317.7 | 30.68 | False | None | None | False | None | False | 285867.036 | 0 |
3875204 | 148636 | None | code06 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fne sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifcations and as per directions of Engineer-in-charge. | Sqm | 309.75 | 309.75 | 199.11 | False | None | None | False | None | False | 61674.3225 | 0 |
3875205 | 148636 | None | code07 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) fnished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fne sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifcations and as per directions of Engineer-in-charge. | Sqm | 389.55 | 389.55 | 88.01 | False | None | None | False | None | False | 34284.2955 | 0 |
3875206 | 148636 | None | code08 | Providing and fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top and bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet and 30 x 50mm wide to form stiles and 5mm thick and 75mm wide PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap insert for top rail and bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles and rails with 5x30mm PVC sheet beading on either side and joined together with solvent cement adhesive etc., Complete as per manufacturers specification and direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. | Sqm | 1667.4 | 1667.4 | 19.8 | False | None | None | False | None | False | 33014.52 | 0 |
3875207 | 148636 | None | code09 | Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to openings /wooden frames
with rawl plugs screws etc. | Kg | 192.15 | 192.15 | 33.45 | False | None | None | False | None | False | 6427.4175 | 0 |
3875208 | 148636 | None | code10 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifcations and as per directions of Engineer-in-charge. | Sqm | 143.85 | 143.85 | 199.11 | False | None | None | False | None | False | 28641.9735 | 0 |
3875209 | 148636 | None | code11 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 ltror10 m²) over and including priming coat of exterior primer applied at 2.20kgor10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifcations and as per directions of Engineer-in-charge. | Sqm | 297.15 | 297.15 | 88.01 | False | None | None | False | None | False | 26152.1715 | 0 |
3875210 | 148636 | None | code12 | Providing and laying Polished Glazed Vitrified tiles with thickness 10
mm in floor with different sizes with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufacturer, in all
colours and shade, laid with cement based high polymer modified quick
set tile adhesive (water based) conforming to IS : 15477, in average 6 mm
thickness, including grouting of joints (Payment for grouting of joints to
be made separately). | Sqm | 1392.3 | 1392.3 | 22.42 | False | None | None | False | None | False | 31215.366 | 0 |
3875211 | 148636 | None | code13 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifcations. | Sqm | 1521.45 | 1521.45 | 29.97 | False | None | None | False | None | False | 45597.8565 | 0 |
3875212 | 148636 | None | code14 | Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever) conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and floors wherever
required:
14.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with
integral type foot rests | Nos | 5128.2 | 5128.2 | 9.0 | False | None | None | False | None | False | 46153.8 | 0 |
3875213 | 148636 | None | code15 | Providing and fxing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fttings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Nos | 3236.1 | 3236.1 | 2.0 | False | None | None | False | None | False | 6472.2 | 0 |
3875214 | 148636 | None | code16 | Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) | Ltr | 9.45 | 9.45 | 1000.0 | False | None | None | False | None | False | 9450.0 | 0 |
3875215 | 148636 | None | code17 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore | Nos | 300.3 | 300.3 | 14.0 | False | None | None | False | None | False | 4204.2 | 0 |
3875216 | 148636 | None | code18 | Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead and lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: 110mm dia 6kgorsqcm | Mtr | 302.4 | 302.4 | 20.0 | False | None | None | False | None | False | 6048.0 | 0 |
3875217 | 148636 | None | code19 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.125x70x4 mm (ordinary type) | Each | 178.5 | 178.5 | 22.0 | False | None | None | False | None | False | 3927.0 | 0 |
3875218 | 148636 | None | code20 | Hold fasts | Each | 52.5 | 52.5 | 11.0 | False | None | None | False | None | False | 577.5 | 0 |
3875219 | 148636 | None | code21 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm | Each | 46.2 | 46.2 | 11.0 | False | None | None | False | None | False | 508.2 | 0 |