3874668 | 148593 | None | dma01 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m | Cum | 249.26 | 249.26 | 26.37 | False | None | None | False | None | False | 6572.9862 | 0 |
3874669 | 148593 | None | dma02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6168.67 | 6168.67 | 4.44 | False | None | None | False | None | False | 27388.8948 | 0 |
3874670 | 148593 | None | dma03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). | Cum | 6580.67 | 6580.67 | 21.0 | False | None | None | False | None | False | 138194.07 | 0 |
3874671 | 148593 | None | dma04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 273.98 | 273.98 | 8.4 | False | None | None | False | None | False | 2301.432 | 0 |
3874672 | 148593 | None | dma05 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1349.3 | 1349.3 | 69.96 | False | None | None | False | None | False | 94397.028 | 0 |
3874673 | 148593 | None | dma06 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9219.01 | 9219.01 | 10.79 | False | None | None | False | None | False | 99473.1179 | 0 |
3874674 | 148593 | None | dma07 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings | MT | 92140.71 | 92140.71 | 1.186 | False | None | None | False | None | False | 109278.88206 | 0 |
3874675 | 148593 | None | dma08 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 321.36 | 321.36 | 86.88 | False | None | None | False | None | False | 27919.7568 | 0 |
3874676 | 148593 | None | dma09 | Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 376.98 | 376.98 | 59.48 | False | None | None | False | None | False | 22422.7704 | 0 |
3874677 | 148593 | None | dma10 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) | Sqm | 162.74 | 162.74 | 146.36 | False | None | None | False | None | False | 23818.6264 | 0 |
3874678 | 148593 | None | dma11 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1139.18 | 1139.18 | 12.0 | False | None | None | False | None | False | 13670.16 | 0 |
3874679 | 148593 | None | dma12 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1139.18 | 1139.18 | 33.6 | False | None | None | False | None | False | 38276.448 | 0 |
3874680 | 148593 | None | dma13 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications | Kgs | 581.95 | 581.95 | 18.0 | False | None | None | False | None | False | 10475.1 | 0 |
3874681 | 148593 | None | dma14 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below , with wall thickness 2.0 mm corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm wall thickness and 3 nos.
stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section | m | 246.17 | 246.17 | 16.8 | False | None | None | False | None | False | 4135.656 | 0 |
3874682 | 148593 | None | dma15 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 5890.57 | 5890.57 | 1.44 | False | None | None | False | None | False | 8482.4208 | 0 |
3874683 | 148593 | None | dma16 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Sqm | 662.29 | 662.29 | 12.4 | False | None | None | False | None | False | 8212.396 | 0 |
3874684 | 148593 | None | dma17 | Water proofing materials | Kgs | 45.32 | 45.32 | 12.0 | False | None | None | False | None | False | 543.84 | 0 |
3874685 | 148593 | None | dma18 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | Each | 6156.31 | 6156.31 | 2.0 | False | None | None | False | None | False | 12312.62 | 0 |
3874686 | 148593 | None | dma19 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3174.46 | 3174.46 | 2.0 | False | None | None | False | None | False | 6348.92 | 0 |
3874687 | 148593 | None | dma20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Ltr | 9.27 | 9.27 | 500.0 | False | None | None | False | None | False | 4635.0 | 0 |
3874688 | 148593 | None | dma21 | Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length, 20mm NB | Nos | 113.3 | 113.3 | 2.0 | False | None | None | False | None | False | 226.6 | 0 |
3874689 | 148593 | None | dma22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work | m | 383.16 | 383.16 | 25.0 | False | None | None | False | None | False | 9579.0 | 0 |
3874690 | 148593 | None | dma23 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete | Nos | 226.6 | 226.6 | 4.0 | False | None | None | False | None | False | 906.4 | 0 |
3874691 | 148593 | None | dma24 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick | m | 69.0 | 69.0 | 14.0 | False | None | None | False | None | False | 966.0 | 0 |
3874692 | 148593 | None | dma25 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way | Each | 220.0 | 220.0 | 2.0 | False | None | None | False | None | False | 440.0 | 0 |
3874693 | 148593 | None | dma26 | Wiring for Lightings/Power Circuit Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 mm2 | m | 42.0 | 42.0 | 48.0 | False | None | None | False | None | False | 2016.0 | 0 |
3874694 | 148593 | None | dma27 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way | Each | 102.0 | 102.0 | 4.0 | False | None | None | False | None | False | 408.0 | 0 |
3874695 | 148593 | None | dma28 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch. | Nos | 326.0 | 326.0 | 2.0 | False | None | None | False | None | False | 652.0 | 0 |
3874696 | 148593 | None | dma29 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module. | Nos | 234.0 | 234.0 | 2.0 | False | None | None | False | None | False | 468.0 | 0 |
3874697 | 148593 | None | dma30 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket | Nos | 171.0 | 171.0 | 2.0 | False | None | None | False | None | False | 342.0 | 0 |
3874698 | 148593 | None | dma31 | Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V.BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 9W, 6500K | Nos | 154.0 | 154.0 | 4.0 | False | None | None | False | None | False | 616.0 | 0 |
3874699 | 148593 | None | dma32 | Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder | Nos | 74.0 | 74.0 | 4.0 | False | None | None | False | None | False | 296.0 | 0 |
3874700 | 148593 | None | dma33 | Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work | Cum | 87.55 | 87.55 | 23.0 | False | None | None | False | None | False | 2013.65 | 0 |