| 1724840659000 | 0 | None | None | Roads | Construction of CC road work in ward no 30 Anandaramashetty site to Schedula caste Burial ground | 421587.64 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3873215 | 148487 | None | 1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work-In all kinds of soils up to 300mm depth (CSR OF 2023-24 Vol-3, Pg-08, I-1.12) | Cum | 97.85 | 97.85 | 72.0 | False | None | None | False | None | False | 7045.2 | 0 | | 3873216 | 148487 | None | 3.1 | Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work (PWD SR 2023-24 Vol:3 P.NO.17 I.No:3.1) | Cum | 87.55 | 87.55 | 72.0 | False | None | None | False | None | False | 6303.6 | 0 | | 3873217 | 148487 | None | 3.1 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.7 I.No:3.1) | Cum | 488.22 | 488.22 | 54.0 | False | None | None | False | None | False | 26363.88 | 0 | | 3873218 | 148487 | None | 6.1 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation
after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3 , optimum moisture content to be determined during trial length construction, concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing. (PWD SR 2023-24 Vol:3 P.NO.49 I.No:6.1) | Cum | 5067.6 | 5067.6 | 32.0 | False | None | None | False | None | False | 162163.2 | 0 | | 3873219 | 148487 | None | 16.27 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. (CSR VOL-3 OF 2023-24, Pg-148, I-16.27) | Cum | 6565.22 | 6565.22 | 32.0 | False | None | None | False | None | False | 210087.04 | 0 | | 3873220 | 148487 | None | 16.25 | Dismantling the damaged or collapsed Machinehole ,conical in shape, and reconstructing the same for the same dimensions, with machine made wire cut brick in CM 1:4 with ordinary portland cement etc. as per design and specifications. The existing ring, cover and CC beeding to be used. For 1.2M dia(CSR VOL-5 OF 2023-24, Pg-197 , I No: 16.25) | Each | 3208.24 | 3208.24 | 3.0 | False | None | None | False | None | False | 9624.72 | 0 |
|