| 1724071215000 | 1 | None | None | Buildings | Construction Of Store Rooms And Ramp For PH | 1302440.99 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3814263 | 144840 | None | item_code1 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of
labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m | Cum | 254.1 | 254.1 | 10.47 | False | None | None | False | None | False | 2660.427 | 0 | | 3814264 | 144840 | None | item_code2 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5947.2 | 5947.2 | 1.1628 | False | None | None | False | None | False | 6915.40416 | 0 | | 3814265 | 144840 | None | item_code3 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm n3ominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5891.55 | 5891.55 | 6.98 | False | None | None | False | None | False | 41123.019 | 0 | | 3814266 | 144840 | None | item_code4 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM 1:6. | Cum | 6770.4 | 6770.4 | 2.67 | False | None | None | False | None | False | 18076.968 | 0 | | 3814267 | 144840 | None | item_code5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 3.48 | False | None | None | False | None | False | 971.964 | 0 | | 3814268 | 144840 | None | item_code6 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7129.46 | 7129.46 | 1.34 | False | None | None | False | None | False | 9553.4764 | 0 | | 3814269 | 144840 | None | item_code7 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9902.02 | 9902.02 | 1.4 | False | None | None | False | None | False | 13862.828 | 0 | | 3814270 | 144840 | None | item_code8 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings | Tonne | 93929.85 | 93929.85 | 0.22 | False | None | None | False | None | False | 20664.567 | 0 | | 3814271 | 144840 | None | item_code9 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.3 | Cum | 11525.85 | 11525.85 | 8.1696 | False | None | None | False | None | False | 94161.58416 | 0 | | 3814272 | 144840 | None | item_code10 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 267.75 | 267.75 | 74.76 | False | None | None | False | None | False | 20016.99 | 0 | | 3814273 | 144840 | None | item_code11 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. | Sqm | 267.75 | 267.75 | 6.3 | False | None | None | False | None | False | 1686.825 | 0 | | 3814274 | 144840 | None | item_code12 | Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including cost of materials, labour, curing, complete as per specifications | Sqm | 825.3 | 825.3 | 9.0 | False | None | None | False | None | False | 7427.7 | 0 | | 3814275 | 144840 | None | item_code13 | Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 27.3 | 27.3 | 74.76 | False | None | None | False | None | False | 2040.948 | 0 | | 3814276 | 144840 | None | item_code14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 143.85 | 143.85 | 74.76 | False | None | None | False | None | False | 10754.226 | 0 | | 3814277 | 144840 | None | item_code15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved
brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 175.35 | 175.35 | 3.24 | False | None | None | False | None | False | 568.134 | 0 | | 3814278 | 144840 | None | item_code16 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 4454.1 | 4454.1 | 3.24 | False | None | None | False | None | False | 14431.284 | 0 | | 3814279 | 144840 | None | item_code17 | Compacting Original Ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. | Cum | 517.65 | 517.65 | 9.64 | False | None | None | False | None | False | 4990.146 | 0 | | 3814280 | 144840 | None | item_code18 | Construction of sub-grade and earthen shoulders withapproved material obtained from borrow pits with all lifts &leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 | Cum | 433.65 | 433.65 | 51.64 | False | None | None | False | None | False | 22393.686 | 0 | | 3814281 | 144840 | None | item_code19 | Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. | Cum | 2686.95 | 2686.95 | 51.64 | False | None | None | False | None | False | 138754.098 | 0 | | 3814282 | 144840 | None | item_code20 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over aprepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. | Cum | 6297.9 | 6297.9 | 65.29 | False | None | None | False | None | False | 411189.891 | 0 | | 3814283 | 144840 | None | item_code21 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. | Tonne | 82052.25 | 82052.25 | 0.203 | False | None | None | False | None | False | 16656.60675 | 0 | | 3814284 | 144840 | None | item_code22 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other(M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates) | Cum | 6104.7 | 6104.7 | 3.15 | False | None | None | False | None | False | 19229.805 | 0 | | 3814285 | 144840 | None | item_code23 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including cost of materials, labour, usage charges of machinery complete as per specifications. | Cum | 120.75 | 120.75 | 244.0 | False | None | None | False | None | False | 29463.0 | 0 | | 3814286 | 144840 | None | item_code24 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications | Each | 1159.2 | 1159.2 | 66.24 | False | None | None | False | None | False | 76785.408 | 0 | | 3814287 | 144840 | None | item_code25 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 267.75 | 267.75 | 139.38 | False | None | None | False | None | False | 37318.995 | 0 | | 3814288 | 144840 | None | item_code26 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 2388.75 | 2388.75 | 18.0 | False | None | None | False | None | False | 42997.5 | 0 | | 3814289 | 144840 | None | item_code27 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 1037.4 | 1037.4 | 44.16 | False | None | None | False | None | False | 45811.584 | 0 | | 3814290 | 144840 | None | item_code28 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In ordinary/soft rock without blasting Depth exceeding 1.5m, but not exceeding 3 m (Page 6 Item No. 1.5.2 PWD CSR Vol. 1) | Cum | 467.25 | 467.25 | 2.16 | False | None | None | False | None | False | 1009.26 | 0 | | 3814291 | 144840 | None | item_code29 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 40 mm nominal size graded crushed coarse aggregates. (Page 15 Item No. 2.1.5 PWD CSR Vol. 1) | Cum | 6463.8 | 6463.8 | 0.14 | False | None | None | False | None | False | 904.932 | 0 | | 3814292 | 144840 | None | item_code30 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Page 16 Item No. 2.4.2 PWD CSR Vol. 1) | Cum | 6639.15 | 6639.15 | 3.95 | False | None | None | False | None | False | 26224.6425 | 0 | | 3814293 | 144840 | None | item_code31 | Addendum I Percentage Additionalities for Formwork,Earth retaining structures 10 % Percentage on finished rate of concrete per m3 Volume of Concrete is 10.36 Cum Centering & Scaffolding- Page 111 & 112 PWD Vol. 1 Common DSR 2023-24 | Sqm | 730.31 | 730.31 | 1.1 | False | None | None | False | None | False | 803.341 | 0 | | 3814294 | 144840 | None | item_code32 | Addendum I Percentage Additionalities for Formwork,Staircase and other similar structures 50% Centering & Scaffolding- Page 111 & 112 PWD Vol. 1 Common DSR 2023-24 | Sqm | 3319.57 | 3319.57 | 2.36 | False | None | None | False | None | False | 7834.1852 | 0 | | 3814295 | 144840 | None | item_code33 | Steel Fabrication- Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Page 18 Item No. 2.11 h PWD CSR Vol. 1)- Assuming 80 Kgs Per Cum of Concrete | Tonne | 82961.55 | 82961.55 | 0.36 | False | None | None | False | None | False | 29866.158 | 0 | | 3814296 | 144840 | None | item_code34 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge(Page 83 Item No.11.26.3 PWD CSR Vol.2) | Sqm | 192.15 | 192.15 | 652.05 | False | None | None | False | None | False | 125291.4075 | 0 |
|