| 1724650585000 | 0 | None | None | Buildings | Construction of Proposed MRF Centre (Material Recovery Facility) of PEB Structure in YADAPURA Village in SHIVAPURA Gramapanchayath, Chamarajanagara Taluk of Chamarajanagara District | 12600000.49 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3853547 | 147323 | None | code01 | Earth work excavation by manual means for drains,canals, waste weir draft,approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work..In ordinary/soft rock without blasting upto 1.5 m depth ---- As per bid document | Cum | 299.0 | 299.0 | 135.3 | False | None | None | False | None | False | 40454.7 | 0 | | 3853548 | 147323 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates(Common SR 2023-24, Vol-1, I No2.1.3) ---- As per bid document | Cum | 5989.0 | 5989.0 | 114.01 | False | None | None | False | None | False | 682805.89 | 0 | | 3853549 | 147323 | None | code03 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Mix M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Common SR 2023-24, Vol-1, I No2.2.1) ---- As per bid document | Cum | 6287.0 | 6287.0 | 50.83 | False | None | None | False | None | False | 319568.21 | 0 | | 3853550 | 147323 | None | code04 | Additionalities for Formwork, centring, & Scaffolding for sub structure. Including cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in-Charge of the work. 3 percent. PWD SR, 2023-24, VOL-1, PG NO-111 ---- As per bid document | Cum | 502.96 | 502.96 | 37.13 | False | None | None | False | None | False | 18674.9048 | 0 | | 3853551 | 147323 | None | code05 | Additionalities for Formwork, centring, & Scaffolding for basement and surface level works of structure. Including cost of all materials, cost of labour, cost of equipment and machinery, cost of hire charges of machinery, lead & lift, loading and unloading, transportation and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer-in- Charge of the work. 50 percent. Common SR , 2023-24, VOL-1, PG NO-111 ---- As per bid document | Cum | 3143.5 | 3143.5 | 13.7 | False | None | None | False | None | False | 43065.95 | 0 | | 3853552 | 147323 | None | code06 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (Common SR 2023-24, Vol-1, I No2.11.h) ---- As per bid document | Tonne | 79011.0 | 79011.0 | 3.7 | False | None | None | False | None | False | 292340.7 | 0 | | 3853553 | 147323 | None | code07 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) m3 (Common SR 2023-24, Vol-2, I No5.1.1) ---- As per bid document | Cum | 5611.0 | 5611.0 | 16.58 | False | None | None | False | None | False | 93030.38 | 0 | | 3853554 | 147323 | None | code08 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM 1:6.(Common SR 2023-24, Vol-2, I No 5.6) ---- As per bid document | Cum | 6448.0 | 6448.0 | 75.67 | False | None | None | False | None | False | 487920.16 | 0 | | 3853555 | 147323 | None | code09 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Common SR 2023-24, Vol-1, I No 2.3.1) ---- As per bid document | Cum | 6323.0 | 6323.0 | 10.09 | False | None | None | False | None | False | 63799.07 | 0 | | 3853556 | 147323 | None | code10 | Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto
1.5 m.(Common SR 2023-24, Vol-1, I No 1.11) ---- As per bid document | Cum | 433.0 | 433.0 | 969.25 | False | None | None | False | None | False | 419685.25 | 0 | | 3853557 | 147323 | None | code11 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage
charges of machinery etc complete as per specifications (Common SR 2023-24, Vol-2, I No 6.34). ---- As per bid document | Cum | 1104.0 | 1104.0 | 109.15 | False | None | None | False | None | False | 120501.6 | 0 | | 3853558 | 147323 | None | code12 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage
charges of machinery etc complete as per specifications.(Common SR 2023-24, Vol-2, I No 6.33). ---- As per bid document | Cum | 1231.0 | 1231.0 | 320.57 | False | None | None | False | None | False | 394621.67 | 0 | | 3853559 | 147323 | None | code13 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Common SR 2023-24, Vol-2, I No 8.3.1). ---- As per bid document | Cum | 354.0 | 354.0 | 951.02 | False | None | None | False | None | False | 336661.08 | 0 | | 3853560 | 147323 | None | code14 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage
charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Common SR 2023-24, Vol-2, I No 11.16.2) ---- As per bid document | Kg | 147.0 | 147.0 | 47904.79 | False | None | None | False | None | False | 7042004.13 | 0 | | 3853561 | 147323 | None | code15 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Common SR 2023-24, Vol-2, I No 7.38) ---- As per bid document | Sqm | 568.0 | 568.0 | 1965.09 | False | None | None | False | None | False | 1116171.12 | 0 | | 3853562 | 147323 | None | code16 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges
of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Common SR 2023-24, Vol-2, I No 11.5.2) ---- As per bid document | Sqm | 4242.0 | 4242.0 | 38.17 | False | None | None | False | None | False | 161917.14 | 0 | | 3853563 | 147323 | None | code17 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.(Common SR 2023-24, Vol-2, I No 12.54) ---- As per bid document | Sqm | 318.0 | 318.0 | 20.59 | False | None | None | False | None | False | 6547.62 | 0 | | 3853564 | 147323 | None | code18 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.do- with both side prelam (Common SR 2023-24, Vol-2, I No 12.55.1) ---- As per bid document | Sqm | 2366.0 | 2366.0 | 20.59 | False | None | None | False | None | False | 48715.94 | 0 | | 3853565 | 147323 | None | code19 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.(Common SR 2023-24, Vol-2, I No 9.12.2) ---- As per bid document | Sqm | 1145.0 | 1145.0 | 82.4 | False | None | None | False | None | False | 94348.0 | 0 | | 3853566 | 147323 | None | code20 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.(Common SR 2023-24, Vol-2, I No 9.12.2) ---- As per bid document | Sqm | 1392.0 | 1392.0 | 127.68 | False | None | None | False | None | False | 177730.56 | 0 | | 3853567 | 147323 | None | code21 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests .(Common SR 2023-24, Vol-2, I No 9.12.2) ---- As per bid document | No | 4884.0 | 4884.0 | 7.0 | False | None | None | False | None | False | 34188.0 | 0 | | 3853568 | 147323 | None | code22 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests .(Common SR 2023-24, Vol-2, I No 9.12.2) ---- As per bid document | No | 4884.0 | 4884.0 | 4.0 | False | None | None | False | None | False | 19536.0 | 0 | | 3853569 | 147323 | None | code23 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(Common SR 2023-24, Vol-2, I No 14.31) ---- As per bid document | No | 1220.0 | 1220.0 | 4.0 | False | None | None | False | None | False | 4880.0 | 0 | | 3853570 | 147323 | None | code24 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g..(Common SR 2023-24, Vol-2, I No 14.40.2) ---- As per bid document | No | 496.0 | 496.0 | 4.0 | False | None | None | False | None | False | 1984.0 | 0 | | 3853571 | 147323 | None | code25 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (Common SR 2023-24, Vol-2, I No 13.59) ---- As per bid document | No | 220.0 | 220.0 | 5.0 | False | None | None | False | None | False | 1100.0 | 0 | | 3853572 | 147323 | None | code26 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Common SR 2023-24, Vol-2, I No 8.28) ---- As per bid document | Sqm | 89.0 | 89.0 | 951.02 | False | None | None | False | None | False | 84640.78 | 0 | | 3853573 | 147323 | None | code27 | Providing, fabricating, assembling and fixing in position aluminum partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm. thick having section weight, plain sections 2.40kg/m single grove section 2.541 kg/m. and double grove section 2.683 kg/m and bottom member 114.3mmx44.45mm 3.18mm thick weight 2.646 kg/m aluminum louver of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved color lamination exterior grade; aluminum sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c: sections are cut to the required lengths, joints mitered and corne grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C columns or masonry on sides, R.C.C lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface , providing and fixing bottom panel filled with the materials to a height of 0.9m from floor level ; and 5.5mm thick plain glass for middle portion viz., 0.9m to 2.13 m and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm with thickness of 0.9mm. weight 0.124kg/m; Using Aluminium section powdered coated to a minimum of 60 - 70 microns with exterior durable pure polester grade powder of approved quality sections pre treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non adherence of mortar or any other sticky materials, vertical member embedded in the flooring by making suitable size holes and fixing with cement mortar ---- As per bid document | Sqm | 4938.5 | 4938.5 | 76.8 | False | None | None | False | None | False | 379276.8 | 0 | | 3853574 | 147323 | None | code28 | Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete.(Common SR 2023-24, Vol-2, I No 9.10) ---- As per bid document | Sqm | 451.0 | 451.0 | 52.84 | False | None | None | False | None | False | 23830.84 | 0 | | 3853575 | 147323 | None | code29 | Providing and Fixing Turbo Ventilators ---- As per bid document | No | 90000.0 | 90000.0 | 1.0 | False | None | None | False | None | False | 90000.0 | 0 |
|