| 3880120 | 148980 | None | code01 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 12101.91 | 12101.91 | 1.72 | False | None | None | False | None | False | 20815.2852 | 0 |
| 3880121 | 148980 | None | code02 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1362.79 | 1362.79 | 73.88 | False | None | None | False | None | False | 100682.9252 | 0 |
| 3880122 | 148980 | None | code03 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1280.61 | 1280.61 | 80.25 | False | None | None | False | None | False | 102768.9525 | 0 |
| 3880123 | 148980 | None | code04 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 11390.04 | 11390.04 | 3.76 | False | None | None | False | None | False | 42826.5504 | 0 |
| 3880124 | 148980 | None | code05 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 10322.22 | 10322.22 | 3.95 | False | None | None | False | None | False | 40772.769 | 0 |
| 3880125 | 148980 | None | code06 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 10678.16 | 10678.16 | 8.12 | False | None | None | False | None | False | 86706.6592 | 0 |
| 3880126 | 148980 | None | code07 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a)Buildings | Tonne | 93062.12 | 93062.12 | 1.522 | False | None | None | False | None | False | 141640.54664 | 0 |
| 3880127 | 148980 | None | code08 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 306.89 | 306.89 | 157.51 | False | None | None | False | None | False | 48338.2439 | 0 |
| 3880128 | 148980 | None | code09 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 336.02 | 336.02 | 185.39 | False | None | None | False | None | False | 62294.7478 | 0 |
| 3880129 | 148980 | None | code10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. | Sqm | 104.03 | 104.03 | 158.6 | False | None | None | False | None | False | 16499.158 | 0 |
| 3880130 | 148980 | None | code11 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 132.12 | 132.12 | 158.6 | False | None | None | False | None | False | 20954.232 | 0 |
| 3880131 | 148980 | None | code12 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 181.01 | 181.01 | 157.51 | False | None | None | False | None | False | 28510.8851 | 0 |
| 3880132 | 148980 | None | code13 | Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm | Sqm | 1287.89 | 1287.89 | 41.28 | False | None | None | False | None | False | 53164.0992 | 0 |
| 3880133 | 148980 | None | code14 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. | Sqm | 217.42 | 217.42 | 41.28 | False | None | None | False | None | False | 8975.0976 | 0 |
| 3880134 | 148980 | None | code15 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1150.57 | 1150.57 | 21.32 | False | None | None | False | None | False | 24530.1524 | 0 |
| 3880135 | 148980 | None | code16 | Providing Honne wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications. | Cum | 141761.68 | 141761.68 | 0.19 | False | None | None | False | None | False | 26934.7192 | 0 |
| 3880136 | 148980 | None | code17 | Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 7370.53 | 7370.53 | 4.62 | False | None | None | False | None | False | 34051.8486 | 0 |
| 3880137 | 148980 | None | code18 | Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made. | Sqm | 6496.67 | 6496.67 | 1.58 | False | None | None | False | None | False | 10264.7386 | 0 |
| 3880138 | 148980 | None | code19 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. | Sqm | 174.77 | 174.77 | 164.0 | False | None | None | False | None | False | 28662.28 | 0 |
| 3880139 | 148980 | None | code20 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 6815.01 | 6815.01 | 7.95 | False | None | None | False | None | False | 54179.3295 | 0 |
| 3880140 | 148980 | None | code21 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) | Sqm | 5949.48 | 5949.48 | 0.27 | False | None | None | False | None | False | 1606.3596 | 0 |
| 3880141 | 148980 | None | code22 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kgs | 152.92 | 152.92 | 267.08 | False | None | None | False | None | False | 40841.8736 | 0 |
| 3880142 | 148980 | None | code23 | Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. | Sqm | 914.42 | 914.42 | 22.68 | False | None | None | False | None | False | 20739.0456 | 0 |
| 3880143 | 148980 | None | code24 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. | Sqm | 849.93 | 849.93 | 111.0 | False | None | None | False | None | False | 94342.23 | 0 |
| 3880144 | 148980 | None | code25 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions ofthe Engineer-in-Charge | Kgs | 587.77 | 587.77 | 105.0 | False | None | None | False | None | False | 61715.85 | 0 |
| 3880145 | 148980 | None | code26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall , 20 mm nominal dia Pipes | Rmtr | 251.75 | 251.75 | 30.0 | False | None | None | False | None | False | 7552.5 | 0 |
| 3880146 | 148980 | None | code27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes | Rmtr | 330.82 | 330.82 | 30.0 | False | None | None | False | None | False | 9924.6 | 0 |
| 3880147 | 148980 | None | code28 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | Each | 14784.74 | 14784.74 | 1.0 | False | None | None | False | None | False | 14784.74 | 0 |
| 3880148 | 148980 | None | code29 | Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class , b)Premium | No | 2720.38 | 2720.38 | 3.0 | False | None | None | False | None | False | 8161.14 | 0 |
| 3880149 | 148980 | None | code30 | Providing and fixing Exposed set for single concealed stop cock with basin spout made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class , a) Economy | No | 2257.45 | 2257.45 | 6.0 | False | None | None | False | None | False | 13544.7 | 0 |
| 3880150 | 148980 | None | code31 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin m | Each | 4287.08 | 4287.08 | 1.0 | False | None | None | False | None | False | 4287.08 | 0 |
| 3880151 | 148980 | None | code32 | Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings : Flat back wash basin of size 550x400 mm. | Each | 801.03 | 801.03 | 1.0 | False | None | None | False | None | False | 801.03 | 0 |
| 3880152 | 148980 | None | code33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | m | 9.36 | 9.36 | 1000.0 | False | None | None | False | None | False | 9360.0 | 0 |
| 3880153 | 148980 | None | code34 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5. | No | 5869.37 | 5869.37 | 2.0 | False | None | None | False | None | False | 11738.74 | 0 |
| 3880154 | 148980 | None | code35 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 | Rmtr | 409.88 | 409.88 | 24.0 | False | None | None | False | None | False | 9837.12 | 0 |
| 3880155 | 148980 | None | code36 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary.25 mm dia 2 mm thick | Rmtr | 84.26 | 84.26 | 80.0 | False | None | None | False | None | False | 6740.8 | 0 |
| 3880156 | 148980 | None | code37 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with onecoat of primer of approved make etc. 200 x 90 x 65 mm Metal box | Each | 186.21 | 186.21 | 10.0 | False | None | None | False | None | False | 1862.1 | 0 |
| 3880157 | 148980 | None | code38 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 sqmm | Rmtr | 27.05 | 27.05 | 250.0 | False | None | None | False | None | False | 6762.5 | 0 |
| 3880158 | 148980 | None | code39 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 sqmm | Rmtr | 43.69 | 43.69 | 150.0 | False | None | None | False | None | False | 6553.5 | 0 |
| 3880159 | 148980 | None | code40 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module switch plates | Each | 295.45 | 295.45 | 10.0 | False | None | None | False | None | False | 2954.5 | 0 |
| 3880160 | 148980 | None | code41 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM /W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shallnot exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shallnot be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) | Each | 2784.88 | 2784.88 | 4.0 | False | None | None | False | None | False | 11139.52 | 0 |
| 3880161 | 148980 | None | code42 | Fixing a ceiling /wall mounting fan of all capacities and all types,with necessary clamps and 'S' hook made out of 15mm dia MS rod,with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality,mounted on a suitable size wooden board and wired | Each | 327.69 | 327.69 | 4.0 | False | None | None | False | None | False | 1310.76 | 0 |
| 3880162 | 148980 | None | code43 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply | Each | 1552.13 | 1552.13 | 1.0 | False | None | None | False | None | False | 1552.13 | 0 |
| 3880163 | 148980 | None | code44 | Fixing all types and all capacities of fluorescent /false ceiling / spotlight / CFL / LED fittings indoor on the wall/ ceiling / rafters / girdersusing 23/0.0076" twin twisted PVC insulated wires, required Nos ofround blocks and clamps.On wall/ ceiling / Rafter / Girders | Each | 126.92 | 126.92 | 5.0 | False | None | None | False | None | False | 634.6 | 0 |
| 3880164 | 148980 | None | code45 | Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI 80. Power Input: 220-240V@50/60Hz & Power factor 0.9 along with CE approved. 2 yearsWarranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 36/40 W | No | 1320.14 | 1320.14 | 1.0 | False | None | None | False | None | False | 1320.14 | 0 |