createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724915185130 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3680.00 emd 221000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 17-09-2024 17:30:00 tenderQueryClose 09-09-2024 11:00:00 technicalBidOpen 20-09-2024 11:00:00 publishedDate 31-08-2024 11:51:15 publishedByPost KSPHIDCL_EECNT_CNT_BNG publishedByUser KPE13762 - SHIVAPRAKASH G bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 13-09-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson SHIVAPRAKASH G splitEmdRequiredYn True emdBankGuarantee 121000.00 emdCash 100000.00 bgValidityPeriod 120 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08025584102 mobileNumber 7892672609 tenderSupplierList None
tenderSchedule	createdTs 1724915185154 version 10 createdDate None modifiedDate None tenderNumber KSPHIDCL/2024-25/BD/WORK_INDENT125 title CONSTRUCTION OF POLICE STATION (GRADE-4) AT JAYANAGAR IN TUMKUR DISTRICT description CONSTRUCTION OF POLICE STATION (GRADE-4) AT JAYANAGAR IN TUMKUR DISTRICT category WORKS categoryText Works ecv 14686779.20 deptName Karnataka State Police Housing and Infrastructure Development Corporation Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 7550 locationName KSPHIDCL Contracts Section Bengaluru provisionalAmount 19920000.0 groupOverheadTotal 0.0 fileNumber PHC/CNT/BNG(R)/TND/45/2024-25/WI-125
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724915185000 0 None None Buildings Construction of police station Grade-4 at Jayanagar in Tumkur district civil 10034874.32 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3876616 148753 None VOL-I Item No 1.12Page No-8 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Sqm 95.55 95.55 504.0 False None None False None False 48157.2 0 3876617 148753 None VOL-I Item No 1.4.2Page No-5 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5m, but not exceeding 3 m Cum 185.85 185.85 76.0 False None None False None False 14124.6 0 3876618 148753 None VOL-I Item No 1.5.1Page No-6 Earth work excavation for Foundation by manual means for all Buildings,Bridges, Retaining walls, Abutment Piers and such similar works as per drawing and technical Specifications, including setting out, providing shoring & strutting,barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth Cum 271.95 271.95 177.41 False None None False None False 48246.6495 0 3876619 148753 None Vol-I Item No2.1.3 Page No. 15 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregate Cum 6125.62 6125.62 94.27 False None None False None False 577462.1974 0 3876620 148753 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in Cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately ) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for Grade Beam & Columns footings Cum 7185.02 7185.02 51.32 False None None False None False 368735.2264 0 3876621 148753 None VOL-I Item No 1.9 Page No-7 Filling available excavated earth ( excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications No.KSB 2.9 Cum 168.0 168.0 346.0 False None None False None False 58128.0 0 3876622 148753 None VOL-II Item No. 6.32 Page No. 17 ground floor Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1375.5 1375.5 432.09 False None None False None False 594339.795 0 3876623 148753 None VOL-II Item No. 6.32 Page No. 17 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. For First Floor Sqm 1389.26 1389.26 253.48 False None None False None False 352149.6248 0 3876624 148753 None VOL-II Item No. 6.34 Page No. 17 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1159.2 1159.2 215.69 False None None False None False 250027.848 0 3876625 148753 None VOL-II Item No. 6.34 Page No. 17 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FOR FF Sqm 1170.79 1170.79 68.39 False None None False None False 80070.3281 0 3876626 148753 None Vol-I Item No 2.1.4 Page No. 15 Providing and laying in position Cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement to be paid separately )Mix 1:3:6 M10 Design Mix Using 20 mm and down size graded crushed coarse aggregates GF Cum 6527.85 6527.85 4.4 False None None False None False 28722.54 0 3876627 148753 None Vol-I Item No 2.1.4 Page No. 15 Providing and laying in position Cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 M10 Design Mix Using 20 mm and down size graded crushed coarse aggregates First floor Cum 6593.13 6593.13 2.27 False None None False None False 14966.4051 0 3876628 148753 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement to be paid separately ) LINTEL Cum 11496.24 11496.24 5.15 False None None False None False 59205.636 0 3876629 148753 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , (The cost of steel reinforcement to be paid separately ) labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. ROOF BEAMS Cum 11496.24 11496.24 14.19 False None None False None False 163131.6456 0 3876630 148753 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes ,(The cost of steel reinforcement to be paid separately ) labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. for Concrete Stair case Cum 11496.24 11496.24 5.52 False None None False None False 63459.2448 0 3876631 148753 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately ) First floor intel Cum 11496.24 11496.24 2.67 False None None False None False 30694.9608 0 3876632 148753 None Vol-I Item No 2.5.2 Page No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement to be paid separately )FF roof Cum 11496.24 11496.24 14.19 False None None False None False 163131.6456 0 3876633 148753 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical (The cost of steel reinforcement to be paid separately ) specifications. for GF chajja Cum 11496.24 11496.24 1.24 False None None False None False 14255.3376 0 3876634 148753 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement to be paid separately ) for chajja FF Cum 11496.24 11496.24 0.66 False None None False None False 7587.5184 0 3876635 148753 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete M25 for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications(The cost of steel reinforcement to be paid separately ) for columns Cum 12214.76 12214.76 20.0 False None None False None False 244295.2 0 3876636 148753 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement to be paid separately ) for columns FF Cum 12286.61 12286.61 12.48 False None None False None False 153336.8928 0 3876637 148753 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately ) Roof slab Cum 10777.73 10777.73 46.89 False None None False None False 505367.7597 0 3876638 148753 None Vol-I Item No 2.5.2 Page No.16 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical (The cost of steel reinforcement to be paid separately ) specifications.FF SLAB Cum 10849.58 10849.58 24.25 False None None False None False 263102.315 0 3876639 148753 None page-15 item no.4.21 KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering (labour charges only) as per specifications. GF Rmtr 33.0 33.0 48.0 False None None False None False 1584.0 0 3876640 148753 None Vol-II Item No 8.10 Page No. 43 Providing 12mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per GF Sqm 339.15 339.15 641.0 False None None False None False 217395.15 0 3876641 148753 None Vol-II Item No 8.10 Page No. 43 Providing 12mm cement plaster with cement mortor 1:3 (1 cement:3 fine sand) including rounding of corroners where ever required smooth rendering,providing and removing scafolding including cost of materials, curring complete as per specification and as per directions of engineer in charge Sqm 342.54 342.54 163.0 False None None False None False 55834.02 0 3876642 148753 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 404.25 404.25 453.19 False None None False None False 183202.0575 0 3876643 148753 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge FF Sqm 416.85 416.85 264.26 False None None False None False 110156.781 0 3876644 148753 None Vol-II Item No 8.10 Page No. 43 Providing 12mm cement plaster with cement mortor 1:3 (1 cement:3 fine sand) including rounding of corroners where ever required smooth rendering,providing and removing scafolding including cost of materials, curring complete as per specification and as per directions of engineer in charge CIELING Sqm 423.94 423.94 263.0 False None None False None False 111496.22 0 3876645 148753 None Vol-II Item No 8.10 Page No. 43 Providing 12mm cement plaster with cement mortor 1:3 (1 cement:3 fine sand) including rounding of corroners where ever required smooth rendering,providing and removing scafolding including cost of materials, curring complete as per specification and as per directions of engineer in charge Sqm 427.33 427.33 79.0 False None None False None False 33759.07 0 3876646 148753 None Vol-II Item No 8.5.2 Page No. 42 Providing rough cement plastering 15mm thick in single coat with cement mortar to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.KSRB15-5.1 :do cement mortar 1:4 Sqm 480.38 480.38 107.0 False None None False None False 51400.66 0 3876647 148753 None Vol-II Item No 8.5.2 Page No. 42 Providing rough cement plastering 15mm thick in single coat with cement mortar to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.KSRB15-5.1 do cement mortar 1:4 Sqm 484.22 484.22 57.0 False None None False None False 27600.54 0 3876648 148753 None Vol-II Item No 8.30Page No. 46 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 259.88 259.88 518.23 False None None False None False 134677.6124 0 3876649 148753 None Vol-II Item No 8.30Page No. 46 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 264.08 264.08 281.9 False None None False None False 74444.152 0 3876650 148753 None Vol-II Item No 8.51 Page No. 50 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. WALL PUTTY Sqm 78.0 78.0 939.25 False None None False None False 73261.5 0 3876651 148753 None Vol-II Item No 8.51 Page No. 50 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. FF PUTY Sqm 78.0 78.0 261.17 False None None False None False 20371.26 0 3876652 148753 None Vol-II Item No 8.30Page No. 46 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ground floor Sqm 107.63 107.63 939.25 False None None False None False 101091.4775 0 3876653 148753 None Vol-II Item No 8.30Page No. 46 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First floor First floor Sqm 107.63 107.63 261.17 False None None False None False 28109.7271 0 3876654 148753 None Vol-II Item No. 12.89 Page No.111 Providing & fixing of 2.5-track x 2-panel sliding windows made out of multi chambered UPVCMatching to RAL-9016) sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI renforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mmThe cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made Sqm 7070.7 7070.7 23.49 False None None False None False 166090.743 0 3876655 148753 None Vol-II Item No. 12.89 Page No. 111 Providing & fixing of 2.5-track x 2-panel sliding windows made out of multi chambered UPVCMatching to RAL-9016) sections and with minimum TiO2Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI renforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mmThe cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made Sqm 7070.7 7070.7 11.34 False None None False None False 80181.738 0 3876656 148753 None VOL-II Item No.11.34 A Page No.86 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 192.15 192.15 1810.98 False None None False None False 347979.807 0 3876657 148753 None 11.28 volume 2 page 85 Providing and fixing Stainless steel 304 grade for staircase railings, balconies, ramps, with hand rail 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals, and 5 Nos.of 25mm dia. stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., complete including cost of materials, labour, HOM of machineries and electrical charges, etc., Kg 593.25 593.25 315.0 False None None False None False 186873.75 0 3876658 148753 None Vol-II Item No. 12.57.1 Page No. 105 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification. including cost of materials , labour chages for fixing fixtures.Etc with all lead and lift Sqm 4665.15 4665.15 14.04 False None None False None False 65498.706 0 3876659 148753 None Vol-II Item No. 12.57.1 Page No. 105 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification. including cost of materials , labour chages for fixing fixtures.Etc with all lead and lift FF Sqm 4665.15 4665.15 12.3 False None None False None False 57381.345 0 3876660 148753 None Vol-II Item No. 12.13.1 Page No. 100 Providing wood frames of doors, windows, clerestory windows, ventilators and other frames wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps but including cost of materials labour HOM complete as per specifications. Specification do Sal wood frame Cum 103755.75 103755.75 0.71 False None None False None False 73666.5825 0 3876661 148753 None Vol-II Item No. 12.13.1 Page No. 100 Providing wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps but including cost of materialslabour HOM complete as per specifications. Specification Cum 103755.75 103755.75 0.48 False None None False None False 49802.76 0 3876662 148753 None Vol-II Item No. 12.51 Page No. 104 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1066.8 1066.8 13.0 False None None False None False 13868.4 0 3876663 148753 None Vol-II Item No. 12.51 Page No. 104 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. No 1066.8 1066.8 10.0 False None None False None False 10668.0 0 3876664 148753 None Vol-II Item No 9.22.2 page no 62 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water vabsorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints .Size of Tile 600x600 mm Sqm 1233.75 1233.75 281.54 False None None False None False 347349.975 0 3876665 148753 None Vol-II Item No 9.22.2 page no 62 Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water vabsorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints .Size of Tile 600x600 mm FOR FF Sqm 1246.09 1246.09 58.8 False None None False None False 73270.092 0 3876666 148753 None Vol-II Item No 9.11page no 60 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1129.8 1129.8 26.17 False None None False None False 29566.866 0 3876667 148753 None Vol-II Item No 9.11page no 60 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 1141.1 1141.1 26.71 False None None False None False 30478.781 0 3876668 148753 None 9.31 VOLUME 2 PAGE 64 Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 4133.85 4133.85 59.14 False None None False None False 244475.889 0 3876669 148753 None Vol-II Item No 9.39 Page No. 65 Providing skirting, dadooing, rises of steps with colour glazed tiles6mm thick on 10mm thick cement plaster 1:3 and jointed with whitecement slurry over existing rough plaster surface using glazed tiles ofapproved make and size including cost of materials, labour, completeas per specifications. Sqm 1155.0 1155.0 111.63 False None None False None False 128932.65 0 3876670 148753 None Vol-I Item No 2.11.a Page No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 14.95 False None None False None False 1404251.2575 0 3876671 148753 None Vol-I Item No 2.11.a Page No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. FF Tonne 94876.92 94876.92 6.05 False None None False None False 574005.366 0 3876672 148753 None Vol-II Item No 8.49 Page No. 49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directionsof Engineer-in-charge. cm 4.2 4.2 5000.0 False None None False None False 21000.0 0 3876673 148753 None page 117 Item no.15.34 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120 gm2 width, along route of walls chipped for services junction between RCC and brick walls including cost of materialslabour for fixing complete as per specifications. length of mesh only measured for pay Rmtr 31.0 31.0 373.6 False None None False None False 11581.6 0 3876674 148753 None Vol-1 item 1.12 PG NO-8 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5m, but not exceeding 3 m Cum 467.25 467.25 76.03 False None None False None False 35525.0175 0 3876675 148753 None Vol 1 iteam 1.9 pg -7 Filling available excavated earth ( excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications No.KSB 2.9 Cum 279.3 279.3 346.0 False None None False None False 96637.8 0 3876676 148753 None vol 1 Iteam 2.1.3 pg 15 providing and laying in Cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement to be paid separately ) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for Grade Beam & Columns footings plinth beam Cum 11496.24 11496.24 17.5 False None None False None False 201184.2 0 3876677 148753 None vol 1 iteam 2.1.3 page 15 providing and laying in Cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement to be paid separately ) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for Grade Beam & Columns footings plinth beam Cum 6601.35 6601.35 15.1 False None None False None False 99680.385 0 3876678 148753 None VOL1 Iteam 1 2.1.3 PAGE 15 FF Screed concrete Cum 6667.36 6667.36 15.1 False None None False None False 100677.136 0 3876679 148753 None page 15 iteam 4.21 Extra for providing throating or drip moulding to R.C.C. chajja with plastering (labour charges only) With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work. Specification No. KBS m 33.0 33.0 48.0 False None None False None False 1584.0 0 3876680 148753 None page15 iteam4.27 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20cms c to c both horizontally and vertially fixing chicken mesh for drop chajja, facia, backing to cup boards With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work. Specification No. KBS Sqm 1072.0 1072.0 16.0 False None None False None False 17152.0 0 3876681 148753 None itam 4.55 page 20 Providing and fixing RCC slabs 5 cms thick for wall shelves with 12mm and down size jelly cement concrete design mix M20 including CM 1:3 plaster finishing, curing etc., complete (excluding cost of steel and fabrication charges) With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work. (It-no-4.55) Sqm 619.0 619.0 19.0 False None None False None False 11761.0 0 3876682 148753 None page 20 iteam 4.55 Providing and fixing RCC slabs 5 cms thick for wall shelves with 12mm and down size jelly cement concrete design mix M20 including CM 1:3 plaster finishing, curing etc., complete (excluding cost of steel and fabrication charges) With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work. (It-no-4.55) Sqm 619.0 619.0 11.0 False None None False None False 6809.0 0 3876683 148753 None page 9 iteam 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6948.9 6948.9 12.3 False None None False None False 85471.47 0 3876684 148753 None page 268 iteam 37.30 Providing wall black boards in CM 1:3 with two coats of black paint including finishing etc., With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work.I( Sqm 781.0 781.0 31.68 False None None False None False 24742.08 0 3876685 148753 None 8.64&8.34.1 vol-2 pno 52 Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand paperingWith including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work. Sqm 105.0 105.0 59.89 False None None False None False 6288.45 0 3876686 148753 None 8.64&8.34.1vol-2 pno 52 Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand paperingWith including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work. Sqm 105.0 105.0 33.57 False None None False None False 3524.85 0 3876687 148753 None NSR 1 Providing Grooves in plasteringon walls 2.5 to mtrs 4 cms vide to the required depth in CM 1:3 including curing etc., With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work. m 40.0 40.0 1425.6 False None None False None False 57024.0 0 3876688 148753 None 215 vol 2 p no A19 Providing and fixing to wall, ceiling and floor galvanised / mild steel tube 40mm dia nominal bore with fittings (medium grade weight 1.27kg/mtr) B classWith including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of thework. Specification m 304.5 304.5 6.0 False None None False None False 1827.0 0 3876689 148753 None NSR2 Plantation of fruit trees No 1050.0 1050.0 10.0 False None None False None False 10500.0 0 3876690 148753 None VOL II ITEAM 9.39 NO 65 Providing skirting, dadooing, rises of steps with colour glazed tiles6mm thick on 10mm thick cement plaster 1:3 and jointed with whitecement slurry over existing rough plaster surface using glazed tiles ofapproved make and size including cost of materials, labour, completeas per specifications. FOR FF Sqm 1141.1 1141.1 26.71 False None None False None False 30478.781 0 1724915185000 0 None None Buildings Construction of police station Grade-4 at Jayanagar in Tumkur district water supply 524704.45 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3876691 148754 None VOL-I Item No 1.4.2Page No-5 Earth work excavation for foundation of structures by mechanical means as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising / transporting the remaining earth locally upto 1.00km lead. -In all types of soil (P-8, I-2.23.1). Cum 493.5 493.5 32.0 False None None False None False 15792.0 0 3876692 148754 None VOL-I Item No 1.9 Page No-7 Filling available excavated earth ( excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications Cum 168.0 168.0 32.0 False None None False None False 5376.0 0 3876693 148754 None 13.31.4 Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work).25mm Mtr 257.5 257.5 100.0 False None None False None False 25750.0 0 3876694 148754 None 13.33.6 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) 50mm pipes confirming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings , this including jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete. 32mm Rmtr 232.78 232.78 90.0 False None None False None False 20950.2 0 3876695 148754 None Vol-VItem No 13.31.3 Page No. Providing and fixing chlorinated poly vinyl chloride ( CPVC ) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all C P V C plain and brass threaded fittings, including fixing the pipe with clamp at 1.00 mtrs spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement , and the cost of cutting chases & making good the same including testing of joints complete (concealed work including cutting chase and good the walls) 40mm Rmtr 335.78 335.78 60.0 False None None False None False 20146.8 0 3876696 148754 None 13.4.1 113 Providing and fixing in position brass gate valve with C.I wheel of approved quality screwed end NB including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification no of 25mmd Nos 973.0 973.0 4.0 False None None False None False 3892.0 0 3876697 148754 None Vol-V Item No 13.70.3 Providing and fixing to wall, ceiling and floor , medium density polythene pipes 6.00 kgf /sqcm working pressure mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of materials, labour charges, HOM of equipments and testing complete as per specifications.75MM Rmtr 444.96 444.96 60.0 False None None False None False 26697.6 0 3876698 148754 None Vol-V Item No 13.70.5Page No. 49 Providing and fixing to wall, ceiling and floor , medium density polyethylene pipes 6.00 kgf /sqcm working pressure outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of materials, labour charges, HOM of equipments and testing complete as per specifications.110mm Mtr 463.5 463.5 159.0 False None None False None False 73696.5 0 3876699 148754 None Vol-V Item No 10.1.9 .7Page No. 113 Providing and fixing to wall, ceiling and floor , medium density polyethylene pipes 6.00 kgf /sqcm working pressure outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of materials, labour charges, HOM of equipments and testing complete as per specifications160 mm dia Rmtr 645.81 645.81 50.0 False None None False None False 32290.5 0 3876700 148754 None ol-II Item No. 14.35.1 Page No.127 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo IndianW.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms Nos 5255.25 5255.25 8.0 False None None False None False 42042.0 0 3876701 148754 None pg 90 12.112.2 Providing stone ware nani trap of approved quality and fixing in C C 1:2:4 and plastering with C M 1:3 where ever necessary Size: 15 cm x 10 cm Each 293.55 293.55 10.0 False None None False None False 2935.5 0 3876702 148754 None pg 269 item no.37.35 Making wall bores in brick masonry walls up to 045 m width for soil water pipe including necessary scaffolding Nos 129.78 129.78 15.0 False None None False None False 1946.7 0 3876703 148754 None pg 269 item no.37.36.2 Making wall bores in stone masonry walls up to 0.45 m width for soil/water pipe including redoing with CM 1:4 and scaffolding. size: 60 cm to 90 cm width Nos 312.09 312.09 8.0 False None None False None False 2496.72 0 3876704 148754 None 13.78, pg. no. 96 Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 1996 with manhole lid and suitable locking arrangements making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials,labour, transport charges, HOM andtesting Nos 8467.0 8467.0 1.0 False None None False None False 8467.0 0 3876705 148754 None 11.50.2, Pg. no. 73 Constructing brick masonry inspection chamber 450x 450 mm , and 450 mm depth, clear dimension for pipeline with one or two inlets , using table moulded non- modular bricks of class designation 50 in cement mortar 1:5, CI cover with frame light duty 455 610mm total weight of cover with frame to be not less than 39 kgs weight fo cover 23kgs and weight of frame 15kg) RCC top slab with cement concrete M15 with 20mm and downsize granite metal, foundation concrete M5 with 40 mm and downsize granite metal inside plastering 12 mm cement on walls and bed concrete complete as per standard design including cost of materials,labour charges, curing complete as per specifications.450 Nos 5459.0 5459.0 6.0 False None None False None False 32754.0 0 3876706 148754 None Volum 5 12.111 Pg. no. 90 Providing & Fixing in position NP grating -7.5 cms to 15.00 cms dia grating 100mm dia Nos 154.5 154.5 8.0 False None None False None False 1236.0 0 3876707 148754 None Vol-II Item No. 14.31 Page No.126 Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Nos 1019.55 1019.55 8.0 False None None False None False 8156.4 0 3876708 148754 None Vol-II Item No. 14.7.1Page No.122 Providing and fixing white vitreous china clay, flat back wash basin with a single 15mm C.P brass pillar tap with C.I M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification Nos 4127.21 4127.21 8.0 False None None False None False 33017.68 0 3876709 148754 None Vol-II Item No. 14.40.2 Page No.128 Providing and fixing CP brass Towel rail 600 mm length, 20 mm dia, with CP brackets, fixed to wooden cleats with CP brass screws including cost of materials, labour complete as per specifications. Nos 399.0 399.0 8.0 False None None False None False 3192.0 0 3876710 148754 None NSR Providing and fixing CP. Health faucet with flexible hose,CP Angle valve, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete Nos 1390.5 1390.5 6.0 False None None False None False 8343.0 0 3876711 148754 None NSR Providing and fixing in position two way bib cock (with face plate) of approved quality 15 mm nominal bore including cost of all materials, labour and HOM of equipments with alll leads complete as per specifications Nos 1350.0 1350.0 6.0 False None None False None False 8100.0 0 3876712 148754 None NSR Providing and fixing in position long body cock (with face plate) for shower control arrangements including the cost of all materials, labour and HOM of equipments etc complete as per directions of engineer in charg Nos 1350.0 1350.0 8.0 False None None False None False 10800.0 0 3876713 148754 None NSR Providing and fixing in position CP bib cock (with face plate) of approved quality 15 mm nominal bore including cost of all materials, labour and HOM of equipments with alll leads complete as per specifications Nos 1350.0 1350.0 8.0 False None None False None False 10800.0 0 3876714 148754 None NSR Providing and fixing in position Jaquar / Hindware / Parry ware or equivalent Angle stop cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all lead, lift, loading, unloading & HOM charges etc., complete as per specifications. and directions of the Engineer-in-charge of work. Each 1250.0 1250.0 20.0 False None None False None False 25000.0 0 3876715 148754 None 11.50.2 PG 73 Constructing brick masonry inspection chamber 600x600 mm , and 450 mm depth, clear dimension for pipeline with one or two inlets , using table moulded non- modular bricks of class designation 50 in cement mortar 1:5, CI cover with frame light duty 455 610mm total weight of cover with frame to be not less than 39 kgs weight fo cover 23kgs and weight of frame 15kg) RCC top slab with cement concrete M15 with 20mm and downsize granite metal, foundation concrete M5 with 40 mm and downsize granite metal inside plastering 12 mm cement on walls and bed concrete complete as per standard design including cost of materials,labour charges, curing complete as per specifications. Nos 8744.7 8744.7 3.0 False None None False None False 26234.1 0 3876716 148754 None page 73 iteam 11.37 Constructing brick masonary circular type manhole 0.91m internal dia at bottom 0.91m deep and 0.56m dia at top with table moulded non modular bricks of 50 class designation 50 in cement mortor 1:4, inside cement plastered 12mm thick with cement mortor 1:3, finished with a floating coat of neat cement, foundation concrete M 10 using 40mm and downsize granite metal and making necessary channel in cement concrete M 50 with 20mm and downsize granite metal finished with a floating coat of neat cement, with S.F.R.C. cover and frame (heavey duty, HD-20 graded designation) 560mm internal disametre confirming IS : 12592, total weight cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4, 20mm and downsize broken granite metal, providing and removing centering, shuttering including cost of materials, labour charges, HOM of mechineries complete as per specifications. Excavation, footrests and 12mm thick cement plaster on the external surface shall be paid separately) With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings Nos 15146.15 15146.15 1.0 False None None False None False 15146.15 0 3876717 148754 None page 81 iteam12.15 Providing & fixing white vitreous china clay, flat back or half stal urinal basin of size 580x380x350mm with 5 litres PVC automatic flushing cistern, CI / MS brackets, standard flush pipe and CP brass spreaders with brass unions and GI clamps CI dtrap with outlet grating and other couplings in CP brass, painting of fittings and brackets, cutting and making good the wall and floor whereever required, including cost of materials, labour complete as per specifications. Each 5124.25 5124.25 4.0 False None None False None False 20497.0 0 3876718 148754 None vol2 it no 14.1.1 PAGE121 Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100 mm S or P trap, 10 litre low level, P.V.C flushing cistern (all are approved make) with fittings, C.I/M.S brackets, 32 mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25 mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specificationsWith including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work Pan 4458.3 4458.3 2.0 False None None False None False 8916.6 0 3876719 148754 None PAGE 99 ITEAM 13.87.6 Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.)40mm nomial OD pipes (external work)With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the 50mm nomial OD pipes m 444.96 444.96 50.0 False None None False None False 22248.0 0 3876720 148754 None PAG 63 ITEAM 13.65.3 Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 32mm dia nominal bore With including all lead, lifts, loading and unloading & HOM charges, all other incidental charges required for completion of work as per approved specifications, designs, drawings etc., complete and directions of the Engineer in-charge of the work . Specifications No. KBS 13.2.6 / 13.3 Each 973.0 973.0 8.0 False None None False None False 7784.0 0 1724915185000 0 None None Buildings Construction of police station Grade-4 at Jayanagar in Tumkur district sump 256273.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3876721 148755 None VOL-I Item No 1.4.2Page No-5 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & otherappurtenaces required to complete the work Depth exceeding 1.5m, but not exceeding3 Cum 195.3 195.3 48.0 False None None False None False 9374.4 0 3876722 148755 None VOL-I Item No 1.5.1Page No-6 Earth work excavation for Foundation by manual means for all Buildings,Bridges, Retaining walls, Abutment Piers and such similar works as per drawing and technical Specifications, including setting out, providing shoring & strutting,barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth Cum 508.2 508.2 20.16 False None None False None False 10245.312 0 3876723 148755 None Vol-I Item No2.1.3 Page No. 15 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregate Cum 5947.2 5947.2 3.6 False None None False None False 21409.92 0 3876724 148755 None Vol-I Item No 2.4.3 Page No. 16 Providing and laying in Cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately )M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates Footing Cum 6542.55 6542.55 10.45 False None None False None False 68369.6475 0 3876725 148755 None VOL-I Item No 1.9 Page No-7 Filling available excavated earth ( excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications Cum 168.0 168.0 68.0 False None None False None False 11424.0 0 3876726 148755 None Vol-II Item No 8.9 Page No. 42 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 413.7 413.7 57.24 False None None False None False 23680.188 0 3876727 148755 None Vol-II Item No 8.1.1Page No. 41 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 344.4 344.4 19.25 False None None False None False 6629.7 0 3876728 148755 None Vol-I Item No 2.11.a Page No.18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 0.97 False None None False None False 91111.9545 0 3876729 148755 None 127PAGE ITEAM13.55 Vol-2 Providing & fixing 60x60 cms MS inspection Door with necessary M S frame made out of M S angle 50X50X6 mm and M S shutter of 31.5mm of B G 10 thick with hinges on top and locking arrangements painting etc complete as specification. Nos 7780.5 7780.5 1.0 False None None False None False 7780.5 0 3876730 148755 None NSR Providing & fixing MS ladder 45cm wide with 65X65X6mm sized angle iron and 20mm M S Bars at 25cm centre to centre with necessary supports as directed and angle iron of same section at braces including fixing in ground with C C 1:2:4 bed and 2 coats of non poisonous anticorrosive bituminous paint as directed (including inserting in the angle iron and welding ) outside Mtr 1785.0 1785.0 3.5 False None None False None False 6247.5 0 1724915185000 0 None None Buildings Construction of police station Grade-4 at Jayanagar in Tumkur district BORE WELL 261220.36 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3876731 148756 None CSR 2022 Vol-V, It. No.O040A Pg No.151 Geophysical investigation at site for sinking borewells for supplyingdrinking water to the habitation either through the Hand Pump MWS orP.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geologicalformation. Geophysical investigation of existing ground water in thevicinity, its quality, quantity and acceptability of the users, indicatingthe location of the site, recommended depth of casing pipe required toseal the top unconsolidated formation including an extra depth of 1.0metre in consolidated formation for proper seating of casing pipe, depthof drilling required to cover full depth of aquifer proposed to be tapped,probable yield and other information required including transportationof instruments and accessories to work site, engaging technical personaland labour required etc. NOTE: 1) Additional rate on item 1&2 isallowed for drilling in over burden and fixing Casing pipes beyond 20 M(for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%,b) Above 30 M - 30% (Measurement of overburden is restricted to thedepth of casing pipe fixed excluding initial depth of 20M and projectionabove ground level). 2) A sum of Rs. 100/- is to be deducted for DryBorewell towards yield test. Each 5446.64 5446.64 1.0 False None None False None False 5446.64 0 3876732 148756 None CSR 2022 Vol-V, It. No.O020A Pg No.151 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig ofcapacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing of casing pipes, collars and capwith ncessary cutting, threading and welding including transportation ofrig and supporting vehicles, crew charges, cost of consumables, cost ofyield test at the final depth with a minimum working of compressor forone hour etc. complete. The cost excludes the cost of casing pipes,collars and caps etc.) for: UP 50 MTRS Rmtr 381.1 381.1 50.0 False None None False None False 19055.0 0 3876733 148756 None CSR 2022 Vol-V, It. No.O020B Pg No.151 Above 50 -100mts Rmtr 477.92 477.92 50.0 False None None False None False 23896.0 0 3876734 148756 None CSR 2022 Vol-V, It. No.O020D Pg No.151 Above 100 - 150 mts Rmtr 507.79 507.79 50.0 False None None False None False 25389.5 0 3876735 148756 None CSR 2022 Vol-V, It. No.O020E Pg No.151 Above 150 - 200 mts Rmtr 589.16 589.16 50.0 False None None False None False 29458.0 0 3876736 148756 None CSR 2022 Vol-V, It. No.O020F Pg No.151 Above 250 - 300mts Rmtr 762.2 762.2 50.0 False None None False None False 38110.0 0 3876737 148756 None CSR 2022 Vol-II, It. No.336 Pg No.A22 M.S. pipe 160 mm dia casing pipe Rmtr 987.77 987.77 40.0 False None None False None False 39510.8 0 3876738 148756 None CSR 2022 Vol-V, It. No.1818,D&R Pg No.54 Providing and fixing MS casing collars Each 154.5 154.5 6.0 False None None False None False 927.0 0 3876739 148756 None CSR 2022 Vol-V, SL. No.1105,5888 Pg No.32 MS casing caps Each 168.92 168.92 1.0 False None None False None False 168.92 0 3876740 148756 None CSR 2022 Vol-V, It. No.O020F Pg No.151 Above200-250 Rmtr 691.13 691.13 50.0 False None None False None False 34556.5 0 3876741 148756 None CSR 2022 Vol-V, It. No.O020F Pg No.151 Above 300-350 Rmtr 894.04 894.04 50.0 False None None False None False 44702.0 0 1724915185000 0 None None Buildings Construction of police station Grade-4 at Jayanagar in Tumkur district Compound wall 1478438.28 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3876742 148757 None vol 1 item 1.3 Earth work excavation for foundation of structures upto 3 mtrs.by mechanical means as per drawing and technical specification,including setting out, providing shoring, strutting and bracing, removalof stumps and other deleterious matter, dressing of sides and bottom,filling back the excavated earth to the extent required and utilising /transporting the remaining earth upto 1.00km lead. including cost oflabour, materials and HOM etc., complete. Cum 195.3 195.3 58.78 False None None False None False 11479.734 0 3876743 148757 None vol 1 item 1.4 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including Cum 208.95 208.95 26.0 False None None False None False 5432.7 0 3876744 148757 None vol 2.1tem 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 5947.2 5947.2 15.0 False None None False None False 89208.0 0 3876745 148757 None vol 1 item 2.2 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately ) Cum 6542.55 6542.55 12.0 False None None False None False 78510.6 0 3876746 148757 None vol II item 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Cum 1375.5 1375.5 248.0 False None None False None False 341124.0 0 3876747 148757 None 2.2 roviding and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications cooping m10 Cum 6288.45 6288.45 4.0 False None None False None False 25153.8 0 3876748 148757 None vol 1 item 1.10 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 168.0 168.0 68.0 False None None False None False 11424.0 0 3876749 148757 None vol 1 item 2.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately ) For columns Cum 6652.8 6652.8 21.66 False None None False None False 144099.648 0 3876750 148757 None vol 1 iem 1.1 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m new earth Cum 423.16 423.16 138.6 False None None False None False 58649.976 0 3876751 148757 None vol 2 iem 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer Sqm 404.25 404.25 722.0 False None None False None False 291868.5 0 3876752 148757 None vol 2 item 8.35.1 Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :One coat with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Cum 107.1 107.1 722.0 False None None False None False 77326.2 0 3876753 148757 None vol 2 page 15 iem 4.21 Providing Patti around doors,windows,ventilators and for parapet and compound wall etc.,with cement mortar 1:3 and finished as per design and specification including scaffolding etc., complete as per directed by the engineer in charge of work. m 34.65 34.65 660.0 False None None False None False 22869.0 0 3876754 148757 None vol II 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 192.15 192.15 450.0 False None None False None False 86467.5 0 3876755 148757 None VOL 1 2.11 ITEAM Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Tonne 93929.85 93929.85 2.5 False None None False None False 234824.625 0 1724915185000 0 None None Buildings Construction of police station Grade-4 at Jayanagar in Tumkur district road 350450.97 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3876756 148758 None PAGE 1.1 VOL 1 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the wor Cum 64.05 64.05 45.0 False None None False None False 2882.25 0 3876757 148758 None ITEM 2.1 VOL-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Cum 6222.3 6222.3 20.25 False None None False None False 126001.575 0 3876758 148758 None 2.5 VOLUME 1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Cum 6542.55 6542.55 20.25 False None None False None False 132486.6375 0 3876759 148758 None page 6.32 item Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 Nos 444.15 444.15 150.0 False None None False None False 66622.5 0 3876760 148758 None item 8.11 page 66 Providing and applying two coats of ready mix paint of approved brand on steel surface after thorough cleaning of surface to give an even shade New wood serface Sqm 95.0 95.0 120.0 False None None False None False 11400.0 0 3876761 148758 None vol 2 8.10 item page 66 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Sqm 92.15 92.15 120.0 False None None False None False 11058.0 0 1724915185000 0 None None Buildings Construction of police station Grade-4 at Jayanagar in Tumkur district furniture 396768.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3876762 148759 None NSR 1 L Shape Table: Providing and fixing L Shape Table, table top made up of 25mm thick ply with post laminated MS powder coated alpha leg under structure with supporing metal modesty inclusive of standard pedestal. The drawers shall be mounted on telescopic slides fitted with brushed finish SS handels withall lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc., complete and as per the directions of the Engineer in-charge of the work, Size 1800x900x750mm ht and 900x600x750mm ht. Nos 30656.0 30656.0 3.0 False None None False None False 91968.0 0 3876763 148759 None NSR 2 Executive chair: Providng & installing revolving type Executive chair with height adj, synchro tilt mechanism with 5 position lock system, mesh back for free air supply with good lumber suport, adj arms, nylon base with unbreakable twin wheel castors model: crown. with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos 22193.0 22193.0 3.0 False None None False None False 66579.0 0 3876764 148759 None NSR 3 Visitor chair: Providng & installing Fixed type Visitor chair with mesh back for free air supply, MS powder coated tubluar under structure, model comfort vistor. with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos 4143.0 4143.0 12.0 False None None False None False 49716.0 0 3876765 148759 None NSR 4 Work station : Providng & installing Table top made up of 25mm thick PLPB with approved laminate color with matching edge banding profile, vertical support to be 75mm thick partitions below table top laminate tiles, above table top one marker/one pin up board for each W/S, Inclusive of standard pedestal with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. 1200x600x1200 Nos 18495.0 18495.0 4.0 False None None False None False 73980.0 0 3876766 148759 None NSR 5 Executive chair: Providng & installing Revoiving type Executive chair with height adj, synchro tilt mechanism with single position lock system, mesh back for free air supply, adj arms, nylon base with unbreakale twin wheel castors model: comfor MBK. with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos 5030.0 5030.0 6.0 False None None False None False 30180.0 0 3876767 148759 None NSR 6 Providng & installing Metal Tandem chair three seater. with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos 6660.0 6660.0 3.0 False None None False None False 19980.0 0 3876768 148759 None NSR 7 Providng installing Free standing table made up of 25 mm thick ply post laminated with approved laminate shade with matching edge banding profile, with supporting gable ends with supporting modesty, table size in mm 1200x900x750ht . with all lead, lifts, loadingunloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer incharge of the work. Nos. 16127.0 16127.0 3.0 False None None False None False 48381.0 0 3876769 148759 None NSR 9 Providng & installing Plastic chairs for auditorium with all lead, lifts, loading, unloading, cost and conveyance of all materials, labour, equipment, transportation charges, testing and all other incidental charges required for successful completion of work as per approved specification, designs, drawings etc,. complete and as per the directions of the Engineer in-charge of the work. Nos. 1332.0 1332.0 12.0 False None None False None False 15984.0 0 1724915185000 0 None None Buildings Electrical estimate for Construction of police station Grade-4 at Jayanagar in Tumkur district 1384049.7 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3876770 148760 None 1.2.1 Electrical - Concealed Conduit System Supplying heavy gauge PVC conduit pipe …19/20…mm dia .2.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary,as per the directions of Engineer in charge of the work. 1) 19/20mm dia 2mm thick Mtr 66.0 66.0 500.0 False None None False None False 33000.0 0 3876771 148760 None 1.2.2 Concealed Conduit System - Supplying heavy gauge PVC conduit pipe …25…mm dia .2.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary and as per the directions of Engineer in charge of the work. 2) 25mm dia 2mm thick Mtr 78.0 78.0 400.0 False None None False None False 31200.0 0 3876772 148760 None 1.12 Supplying and Fixing Metal Fan Box with Round Hook. and as per the directions of Engineer in charge of the work. Each 160.0 160.0 20.0 False None None False None False 3200.0 0 3876773 148760 None 1.3.1 Groove cutting Supplying heavy gauge PVC Conduit Pipe 19/20….dia .2.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary ,as per the directions of Engineer in charge of the work. 1) 19/20mm dia 2mm thick Mtr 68.0 68.0 280.0 False None None False None False 19040.0 0 3876774 148760 None 1.3.2 Groove cutting Supplying heavy gauge PVC Conduit Pipe 25.dia .2.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary ,as per the directions of Engineer in charge of the work. 1) 25mm dia 2mm thick Mtr 79.0 79.0 150.0 False None None False None False 11850.0 0 3876775 148760 None 2.3.2 Wiring for lighting/power circuit using one of FRLSH PVC insulated 1100V grade 1.5 Sqmm Mtr 26.0 26.0 650.0 False None None False None False 16900.0 0 3876776 148760 None 2.3.3 Wiring for lighting/power circuit using one of FRLSH PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments ,as per the directions of Engineer in charge of the work. 2) 2.5 Sqmm Mtr 42.0 42.0 1200.0 False None None False None False 50400.0 0 3876777 148760 None 2.3.4 Wiring for lighting/power circuit using one of FRLSH PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments ,as per the directions of Engineer in charge of the work. 3) 4 Sqmm Mtr 63.0 63.0 400.0 False None None False None False 25200.0 0 3876778 148760 None 2.2.1 Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSH multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. as per the directions of Engineer in charge of the work. 1) Short point upto 3Mtr. from tapping point to out let via switch. Point 269.0 269.0 20.0 False None None False None False 5380.0 0 3876779 148760 None 2.2.2 Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSH multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. as per the directions of Engineer in charge of the work. 2) Medium point above 3Mtr. Upto 6Mtr. from tapping point to out let via switch Point 379.0 379.0 62.0 False None None False None False 23498.0 0 3876780 148760 None 2.2.3 Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSH multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. as per the directions of Engineer in charge of the work. c) Long point above 6Mtr. Upto 10Mtr. from tapping point to out let via switch. Point 555.0 555.0 20.0 False None None False None False 11100.0 0 3876781 148760 None Ele SR 14-15 Item No-4.2.2 Supplying and fixing PBBC/bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps. No 71.0 71.0 50.0 False None None False None False 3550.0 0 3876782 148760 None Ele SR 14-15 Item No-4.4 Suppying and fixing cast Aluminium round or ablong type LED 10 watts bulk head fitting suitable for operation of 220 to 240 Volts with burning hours 25 to 50,000 ,as per the directions of Engineer in charge of the work. Each 952.0 952.0 4.0 False None None False None False 3808.0 0 3876783 148760 None 6.3.1 6.3.1Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48"" Sweep (1200mm). and as per the directions of Engineer in charge of the work. Rated air delivery 210 +/- 10% CMM(Cubic Meters per Minute) Each 2984.0 2984.0 20.0 False None None False None False 59680.0 0 3876784 148760 None 13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring ,as per the directions of Engineer in charge of the work. Each 171.0 171.0 20.0 False None None False None False 3420.0 0 3876785 148760 None 6.1 Supplying exhaust fan of 1440 RPM of 300 mm(12') size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply, ,as per directions of engineer incharge of the work. Each 1492.0 1492.0 8.0 False None None False None False 11936.0 0 3876786 148760 None 13.14 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. Ceiling rose wisth sufficient length of 23/0.0076 inch PVC insulated twincore wire ,as per directions of engineer incharge of the work. Each 707.0 707.0 8.0 False None None False None False 5656.0 0 3876787 148760 None 11.3.2 Supplying of .feet -PVC Batten with integrated LED tube . LED light fitting 1 x 4' - 20/22 W Each 690.0 690.0 15.0 False None None False None False 10350.0 0 3876788 148760 None 11.3.3 Supplying of LED ENERGY SAVING slim type 4' feet light fitting of 28 watts Bright LED light No 1197.0 1197.0 25.0 False None None False None False 29925.0 0 3876789 148760 None 13.7.1 Fixing all types and all capacities of LED light fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks , holder with adopter and clamps. a) On wall/ceiling/Rafter/Girders ,as per the directions of Engineer in charge of the work. No 122.0 122.0 40.0 False None None False None False 4880.0 0 3876790 148760 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia as per the directions of Engineer in charge of the work. Set 3510.0 3510.0 2.0 False None None False None False 7020.0 0 3876791 148760 None 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts ,as per directions of engineer incharge of the work. Each 4256.0 4256.0 2.0 False None None False None False 8512.0 0 3876792 148760 None Ele SR 2019-20 6.3.1 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required ,as per directions of engineer incharge of the work. GI strip 25x3mm Mtr 75.0 75.0 20.0 False None None False None False 1500.0 0 3876793 148760 None 12.58.7 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. copper strip 25x3mm Each 570.0 570.0 25.0 False None None False None False 14250.0 0 3876794 148760 None 12.58.11 Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required. Copper strip f) 600 x 600 x 3mm copper plate as per the directions of Engineer in charge of the work. Each 7421.0 7421.0 2.0 False None None False None False 14842.0 0 3876795 148760 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,as per the directions of Engineer in charge of the work. i) 1-3Way Each 159.0 159.0 35.0 False None None False None False 5565.0 0 3876796 148760 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,as per the directions of Engineer in charge of the work. ii) 4-5Way Each 177.0 177.0 25.0 False None None False None False 4425.0 0 3876797 148760 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,as per the directions of Engineer in charge of the work. ii) 6Way Each 220.0 220.0 25.0 False None None False None False 5500.0 0 3876798 148760 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,as per the directions of Engineer in charge of the work. iii) 8Way Each 261.0 261.0 35.0 False None None False None False 9135.0 0 3876799 148760 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ,as per the directions of Engineer in charge of the work. iii) 10-12 Way Each 319.0 319.0 8.0 False None None False None False 2552.0 0 3876800 148760 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box ,as per the directions of Engineer in charge of the work. i)1 to 3 Module Each 161.0 161.0 35.0 False None None False None False 5635.0 0 3876801 148760 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. and as per the directions of Engineer in charge of the work. ii) 4 Module Each 175.0 175.0 25.0 False None None False None False 4375.0 0 3876802 148760 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. and as per the directions of Engineer in charge of the work. iii) 6 Module Each 234.0 234.0 25.0 False None None False None False 5850.0 0 3876803 148760 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. and as per the directions of Engineer in charge of the work. iv) 8 Module Each 284.0 284.0 35.0 False None None False None False 9940.0 0 3876804 148760 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. and as per the directions of Engineer in charge of the work. iv) 10-12 Module Each 344.0 344.0 6.0 False None None False None False 2064.0 0 3876805 148760 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. i) 6 Amps one way switch Each 102.0 102.0 140.0 False None None False None False 14280.0 0 3876806 148760 None 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. iv) b) 16 Amps one way switch Each 180.0 180.0 20.0 False None None False None False 3600.0 0 3876807 148760 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. ii) 6 Amps 3 way socket Each 171.0 171.0 70.0 False None None False None False 11970.0 0 3876808 148760 None 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. iv) d) 6/16 Amps universal socket Each 236.0 236.0 5.0 False None None False None False 1180.0 0 3876809 148760 None 8.10.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. l) RJ45/I.O. outlet Each 550.0 550.0 34.0 False None None False None False 18700.0 0 3876810 148760 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. v) Stepped Fan Regulator Each 313.0 313.0 20.0 False None None False None False 6260.0 0 3876811 148760 None 3.6.12 Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. and as per the directions of Engineer in charge of the work. vi) TV socket Each 147.0 147.0 2.0 False None None False None False 294.0 0 3876812 148760 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. 32Amps DP switch Each 375.0 375.0 5.0 False None None False None False 1875.0 0 3876813 148760 None 12.2.3 Supplyingandfixingoneof230VDingdongbellandaflushtypebellpushwithgangboxfixedonnecessarywoodenorrawlplugsusingNFscrews with Remote. Each 1190.0 1190.0 4.0 False None None False None False 4760.0 0 3876814 148760 None Bescom SR 21-22 32.07 Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 a) 3.5 core 25 sqmm Mtr 181.45 181.45 120.0 False None None False None False 21774.0 0 3876815 148760 None Bescom SR 21-22 32.05 Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 a) 4 core 16 sqmm Mtr 183.44 183.44 80.0 False None None False None False 14675.2 0 3876816 148760 None Bescom SR 21-22 31.06 Labour charges for Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff a) 25 sqmm to 75 sqmm Mtr 23.64 23.64 120.0 False None None False None False 2836.8 0 3876817 148760 None Bescom SR 21-22 31.05 Labour charges for laying of 1.1 KV class UG cable when supplied agency stoneware pipe / on wall / on pole as required. In exixting trench/duct. 2.5 sqmm to 25 sqmm as per the directions of Engineer in charge of the work. Mtr 20.88 20.88 80.0 False None None False None False 1670.4 0 3876818 148760 None Ele SR 2019-20 6.10.3 Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. 1) 25 Sqmm Each 350.0 350.0 2.0 False None None False None False 700.0 0 3876819 148760 None Ele SR 2019-20 6.6.1 Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) as per the directions of Engineer in charge of the work. Mtr 76.0 76.0 75.0 False None None False None False 5700.0 0 3876820 148760 None Ele SR 2019-20 6.9.1 Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. and as per the directions of Engineer in charge of the work. 1) 40 mm Mtr 335.0 335.0 10.0 False None None False None False 3350.0 0 3876821 148760 None Ele SR 2019-20 .7.20.3 Supplying and Laying double walled corrugated HDPE Pipe in clouding all accessories Mtr 215.0 215.0 50.0 False None None False None False 10750.0 0 3876822 148760 None 5.42.2 Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with suitable approved colour powder coated paint ,as per directions of engineer incharge of the work. 1) 16 SWG Sq CM 0.43 0.43 65000.0 False None None False None False 27950.0 0 3876823 148760 None 5.41.2 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint ,as per directions of engineer incharge of the work. b) 40x40x6mm Mtr 305.0 305.0 8.0 False None None False None False 2440.0 0 3876824 148760 None 5.40.2 supplying .250. amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary botls,nuts and washers ,as per directions of engineer incharge of the work. a) 250 Amps 4x30x10mm Aluminium Strips Mtr 3435.0 3435.0 0.5 False None None False None False 1717.5 0 3876825 148760 None 5.11.2 Supplying of on load change over over switches 4 poles, AC 23Amps duty 415V, 50HZ, AC Supply ,as per directions of engineer incharge of the work. 100Amps Each 7090.0 7090.0 1.0 False None None False None False 7090.0 0 3876826 148760 None 5.15.10 Supplying and Fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete, protection of Overload and Short circuit with thermal Magnetic/Microprocessed release and Earth Fault as per IS-13947. (icu =lcs) FOUR POLE) ,as per directions of engineer incharge of the work. a)125 Amps 25kA Each 10341.0 10341.0 1.0 False None None False None False 10341.0 0 3876827 148760 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C 50Hz 12/24v D.C ,as per the directions of Engineer in charge of the work. Each 515.0 515.0 3.0 False None None False None False 1545.0 0 3876828 148760 None 5.29 Supplying, fixing and wiring 3 phase Digital Ammeter/ Voltmeter ,as per directions of engineer incharge of the work. Each 1425.0 1425.0 2.0 False None None False None False 2850.0 0 3876829 148760 None 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 ,as per the directions of Engineer in charge of the work. 6-32Amps SP No 523.0 523.0 12.0 False None None False None False 6276.0 0 3876830 148760 None 5.17.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 ,as per the directions of Engineer in charge of the work. 6-32Amps DP Each 1103.0 1103.0 3.0 False None None False None False 3309.0 0 3876831 148760 None 5.17.7 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 ,as per the directions of Engineer in charge of the work. 6-32Amps TPN Each 1777.0 1777.0 5.0 False None None False None False 8885.0 0 3876832 148760 None 5.18.9 SSupplying and fixing regular Double Door 12 Way SP &N MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. 1) Double Door 12 Way SP &N and as per the directions of Engineer in charge of the work Each 2329.0 2329.0 4.0 False None None False None False 9316.0 0 3876833 148760 None 5.20.1 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16-25 Amps 2 pole and as per the directions of Engineer in charge of the work. Each 4277.0 4277.0 4.0 False None None False None False 17108.0 0 3876834 148760 None 11.8.3 Supply of LED Streetlight 70w luminaire with pressure die cast Each 5992.0 5992.0 4.0 False None None False None False 23968.0 0 3876835 148760 None 13.1.2 Supplying and Fixing of …….mm dia class A GI pipe bracket up to 2 mtrs long bent at suitable angle and fixing to this bracket 1 x40/2x40 watts fluorescent tube street light fitting of all capacities to GI or CL or rail or RCC pole/wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires Using 32mm dia G.I.Pipe, ,as per directions of engineer incharge of the work. Each 978.0 978.0 4.0 False None None False None False 3912.0 0 3876836 148760 None 11.6.3 Supplying of recess mounting non integral type .2'x2' 36watt LED modular down light 2'x2' 36watt Each 4553.0 4553.0 2.0 False None None False None False 9106.0 0 3876837 148760 None 11.11.7 Supplying & fixing of retrofit type - LED bulb 18 W 18W, 6500K No 154.0 154.0 20.0 False None None False None False 3080.0 0 3876838 148760 None 8.1 Supply& Laying of UTP cat-6E LAN cable and as per the directions of Engineer in charge of the work. Mtr 38.0 38.0 2000.0 False None None False None False 76000.0 0 3876839 148760 None 8.2.2 Supplying and drawing PVC flexible one pair telepone unarmoured tinned copper cable. 2 pair and as per the directions of Engineer in charge of the work. Mtr 19.0 19.0 120.0 False None None False None False 2280.0 0 3876840 148760 None 8.4.2 Supplying & Fixing of switch mounting rack with power manager & Cable manager. 6U with 450mm depth Each 4657.0 4657.0 3.0 False None None False None False 13971.0 0 3876841 148760 None 8.9.6 Supplying fixing of Network Switches. 16 port Switch and as per the directions of Engineer in charge of the work. No 2809.0 2809.0 2.0 False None None False None False 5618.0 0 3876842 148760 None 8.9.2 Supplying fixing of Network Switches. port24 Port Gigabyte (manageable) and as per the directions of Engineer in charge of the work. No 46053.0 46053.0 1.0 False None None False None False 46053.0 0 3876843 148760 None 8.12.2 Supplying & Fixing of Patch panel for LAN cabling 24 port 10/100 patch panel and as per the directions of Engineer in charge of the work. No 4258.0 4258.0 2.0 False None None False None False 8516.0 0 3876844 148760 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling 16 Port 10/100 patch panel and as per the directions of Engineer in charge of the work. No 3050.0 3050.0 1.0 False None None False None False 3050.0 0 3876845 148760 None 8.10.2 Supplying & fixing of I/O socket with back box, Double I/o Each 727.0 727.0 34.0 False None None False None False 24718.0 0 3876846 148760 None 8.11.1 Supplying & fixing of 1 mtrs. Cat 6Patch Cable. 2Mtr Each 224.0 224.0 34.0 False None None False None False 7616.0 0 3876847 148760 None 8.11.2 Supplying & fixing of 2 mtrs. Cat 6Patch Cable. 2Mtr Each 257.0 257.0 34.0 False None None False None False 8738.0 0 3876848 148760 None 15.5 Supplyandinstallationo f 9kgStoredPressureType,PressureGuage,GrossWeight14.9Kg,emptyweight3.4Kg,CanHeight480MM,Diameter160MM,DischargeTimelessthan13Sees,Controllabledischargemechanism(Squeezegripwitheasysnapsafetyseal),Rangeminimum4meters,CanconstructionDeepdrawn&Co.,Migwelded,valveConstrucitonForgingandMechining,InternalCoatingofCan:Epoxypowdercoating,ExternalCoatingofCan:EpoxyPolysterpowercoating,Sheetmetalthickness:1.60MM,IS15683andCEApproved5yearswarranty.withinstalertsystemwithSuperiorqualityEPDMRubberHosepipeetc.,includingcostcostofsupportingmaterialslikeMSstand&accessariesifitisfixingnfloor/MSbrackets&accessoriesifitisfixingonwall,labour,usagechargesofmachinerycompleteasperspecifications. completes. complete and as per the directions of Engineer in charge of the work. Set 3350.0 3350.0 2.0 False None None False None False 6700.0 0 3876849 148760 None Civil SR Supplying of 1 HP Open well Mono sub pump set suitable for operation on 230 volts 2880 RPM single phase AC supply And as per the directions of engineer incharge of the work. Set 9138.0 9138.0 1.0 False None None False None False 9138.0 0 3876850 148760 None NSR Supplying of 50 mm kirloskar / other approved make CI screwed foot valve, as per the directions of engineer incharge of the work. No 450.0 450.0 1.0 False None None False None False 450.0 0 3876851 148760 None 5.1 Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 volts 1/3 phase motor upto 5 HP. Each 1490.0 1490.0 1.0 False None None False None False 1490.0 0 3876852 148760 None Civil SR 21-22 pg No 13.6 P130F Providing, supplying to work site, Submersible Pump Set 5 HP 15 stage of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. Set 35950.0 35950.0 1.0 False None None False None False 35950.0 0 3876853 148760 None NSR Erection, Electrification and commissioning Work of Pump Sets : eraction of pumpset including aligning and balancing with all necessary erection materials and labour including supply and erection of two pair of supporting clamps, bore-well, cap, cable ,as per the directions of Engineer in charge of the work. Set 5000.0 5000.0 1.0 False None None False None False 5000.0 0 3876854 148760 None Civil SR 18-19 Sl No. 13.37 KSRB 13-6.3-: Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) NB including cost of all materials, labour and HOM of equipments with all leads complete as per specifications ,as per the directions of Engineer in charge of the work. Each 1739.0 1739.0 1.0 False None None False None False 1739.0 0 3876855 148760 None Civil SR 18-19 Sl No. 13.62 KSRB13-7.2: Providing and fixing in position 50 mm nominal bore non-return valve vertical type of approved make including cost of all materials, labour and HOM of equipments with alll leads complete as per specifications ,as per the directions of Engineer in charge of the work. Each 1269.0 1269.0 1.0 False None None False None False 1269.0 0 3876856 148760 None Civil SR 21-22 P280A Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S-D- Star Delta Starter for outdoor Upto 6 HP pumps Set 12500.0 12500.0 1.0 False None None False None False 12500.0 0 3876857 148760 None 2.6.2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100Volts as per IS-694:1990. 3C X 4.0Sq.mm as per the directions of the engineer in charge of the work. Rmtr 168.0 168.0 250.0 False None None False None False 42000.0 0 3876858 148760 None Civil SR 2018-19 Providing and fixing in trenches galvanised/ mildsteel tubes 50mm dia nominal bore with all fittings including cost of all materials and labour charges and HOM of equipments and testing complete as per specifications Make - Group ""A"" materials and as per the directions of Engineer in charge of the work. Mtr 512.0 512.0 200.0 False None None False None False 102400.0 0 3876859 148760 None 5.7.3 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps and as per the directions of Engineer in charge of the work. No 401.0 401.0 6.0 False None None False None False 2406.0 0 3876860 148760 None Bescom SR 2023-224 1.01 Supplying 9 Mtr RCC Pole 145Kg WL. including earth work etc,. Complete as per the standard technical specification., 9 Mtr 145Kg WL. (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 ,as per the directions of Engineer in charge of the work. Each 7076.0 7076.0 1.0 False None None False None False 7076.0 0 3876861 148760 None Bescom SR 2023-24 2.05 Supplying of L.T.4 Pin cross arms, with pole clamps, bolts, nuts and washers (for RCC poles) Set 289.0 289.0 2.0 False None None False None False 578.0 0 3876862 148760 None Bescom SR 2023-24 7.02 Supplying of Rabbit ACSR Conductor with 1.5% sag.and as per the directions of Engineer in charge of the work. Km 46234.0 46234.0 0.4 False None None False None False 18493.6 0 3876863 148760 None Bescom SR18-19 Fixing of guy set with guy wire, guyrod and break insulators etc complete set and as per the directions of Engineer in charge of the work. No 175.0 175.0 2.0 False None None False None False 350.0 0 3876864 148760 None Bescom SR 2023-24 2.02 Erection of RCC PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth with consoldation etc, complete ,as per the directions of Engineer in charge of the work. No 922.0 922.0 2.0 False None None False None False 1844.0 0 3876865 148760 None Bescom SR 2023-24 5.02 Fixing of 4 Pin cross arm with insulator and Braces fixing and as per the directions of Engineer in charge of the work. Set 160.0 160.0 6.0 False None None False None False 960.0 0 3876866 148760 None 9.3.3 Supplying, erecting, testing & commissioning of 5 KVA ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories one hour back up complete and Excluding batteries and wiring complete. 5 KVA Set 68383.0 68383.0 1.0 False None None False None False 68383.0 0 3876867 148760 None 9.4.3 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 60 to 65 AH capacity Each 6413.0 6413.0 12.0 False None None False None False 76956.0 0 3876868 148760 None 11.7.1 Supply of LED pole mounting type LED Post Top Lantern with 25 watts No 6922.0 6922.0 2.0 False None None False None False 13844.0 0 3876869 148760 None 13.6 Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI / GI or any other pipe using required size of reducer, wiring using suitable wires Each 198.0 198.0 2.0 False None None False None False 396.0 0 3876870 148760 None CSR page 247 21.1. 1Vol 5 Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components-For 25 LPH : Cabin Type No 25000.0 25000.0 1.0 False None None False None False 25000.0 0 3876871 148760 None Approved rates Supply of erection testing and commissioning of water level controller and connected accessoriers etc. No 10000.0 10000.0 1.0 False None None False None False 10000.0 0 3876872 148760 None 2.5.4 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS694:2010 6C x 1.5 mm2 Mtr 121.0 121.0 60.0 False None None False None False 7260.0 0 3876873 148760 None Bescom SR 2023-24 5.17 Stringing of No.1 ACSR Rabbit conductor with 1.5% sag and as per the directions of Engineer in charge of the work. Km 5233.0 5233.0 0.4 False None None False None False 2093.2 0 3876874 148760 None 6.22 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries. Each 4807.0 4807.0 1.0 False None None False None False 4807.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724915187000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1724915187000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724915187000 1 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contract value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1724915187000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724915187000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1724915287000 0 None None ELIGIBILITY The tender document is part and parcel of the agreement. None 1724915365000 0 None None ELIGIBILITY The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any None 1724915386000 0 None None ELIGIBILITY The bidder shall study the Tender document Carefully and quote the rates. None 1724915411000 0 None None ELIGIBILITY Drawings uploaded are only for Tender Purpose only None 1724915429000 0 None None ELIGIBILITY The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KSPH & IDCL have the right to deduct the work bills and remit the same to respective PF offices. None 1724915446000 0 None None ELIGIBILITY The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time and if any variation occurs it shall be paid / refunded by / to the Corporation against documentary evidence None 1724915465000 0 None None ELIGIBILITY The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act None 1724915482000 0 None None ELIGIBILITY Remittance towards PF shall be commensurate with the labour component of the work involved. None 1724915601000 0 None None ELIGIBILITY The Bidder shall remit PF of labourers to Bidders permanent PF code number only None 1724915618000 0 None None ELIGIBILITY The bidder should maintain register of labourers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. None 1724915775000 0 None None ELIGIBILITY The contractor shall obtain insurance coverage for all the workers deployed for this work. None 1724915815000 0 None None ELIGIBILITY Corrigendum/modification/corrections, if any, will be published in the karnataka public procurement portal and www.ksphc.org web sites only. None 1724915970000 0 None None ELIGIBILITY Tender amount of Rs.14686779.20 is inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST None 1724916085000 0 None None ELIGIBILITY The rates quoted by the Contractor shall be deemed to be inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST as applicable as per the latest Notifications of GoK and GoI prevailing as on the date of NIT. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law. GST shall be paid to the tendered amount separately. The Contractor should submit the tax invoice along with RA Bills. None 1724916109000 0 None None ELIGIBILITY Further details of the work or any clarifications can be obtained from the office of the Executive Engineer(Contracts), KSPH & IDCL, Richmond Road, Bangalore 560025. Ph: 080-25584102 Extn - 130 / 114 / 117 None 1724916119000 0 None None ELIGIBILITY The bidder should furnish the documents relating to registration of GST None 1724916130000 0 None None ELIGIBILITY The bidder should furnish the valid address, phone number & e mail ID None 1724916142000 0 None None ELIGIBILITY The intended bidder shall visit the site & quote his offer accordingly and for having visited the site, they should upload the photos while submitting the tender. None 1724916275000 0 None None ELIGIBILITY Tenders must be accompanied by Earnest Money Deposit (EMD) of Rs. 2.21 Lakhs (Rupees Two Lakhs Twenty One Thousand only), which may be paid fully through Karnataka Public Procurement Portal or Out of total EMD amount Rs. 1.00 lakh (Rupees One Lakh only) shall be paid online through Karnataka Public Procurement Portal using any of the following Payment Modes: Credit Card, Direct Debit, National Electronic Fund Transfer (NEFT), Over the Counter (OTC) and the balance amount of Rs. 1.21 Lakhs (Rupees One Lakh Twenty One Thousand only) in the form of Bank Guarantee (BG) only issued from Nationalized/Scheduled Commercial Banks in the Name of C&MD, KSPH&IDCL, Bengaluru. The scan copy of the Bank Guarantee (BG) to be uploaded at the time of submission of bid documents and the original Bank Guarantee should be submitted to Office of the Executive Engineer (Contracts), KSPH & IDCL, No.59, Gen. K.S. Thimmayya Road, Bangalore 560025 On or before the Last date of receipt of tender and the non-compliance of the same leads to the rejection of the bid. None 1724916317000 0 None None ELIGIBILITY Bounded scanned hard copies are to be submitted duly marking the Page Nos. within 3 days after the last date of submission of the bid documents online to EE(Contracts), KSPH & IDCL, Bangalore. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None 1.3 of Section-3 Qualification Information: Work performed as Prime Contractor (in the same name) on works of similar nature over during the five years (2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer None None None None 1.4 of Section-3 : Quantities of work executed as prime contractor (in the same name) during the last five years (2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer None None None None 1.5 of Section-3 Qualification Information : Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender : (A) Existing commitments and ongoing works & (B) Works for which Tenders already submitted Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer None None None None 3.2- To qualify for award of this contract, each Tender in his/her/their name should have in the last five years i.e. 2019-20 to 2023-24): (b) Satisfactorily completed as prime contractor (at least 90% of the contract value), at least one similar nature of work of value not less than Rs.73.43 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work Done certificate issued not below the rank of an Executive Engineer or equivalent. None None None None ITT - 3.2 d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totalling Rs.7.35 Lakhs in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Workdone certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded. None None None None 3.2 (e) The Tenderer or his identified subcontractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.2.63 Lakhs in any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work done certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded. None None None None 1.7 of Section-3: Qualification Information: Reports on the financial standing of the tenderer, such as profit and Loss statements and auditors reports for the last five years. (2019-20 to 2023-24) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Profit & Loss Statement from Registered Chartered Accountant None None None None Be a Class-III & above Civil registered contractor of State PWDs / Central/MES/ Govt. Undertakings Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Valid Registration Certificate issued by respective Depts None None None None Be Registered with KSPH & IDCL Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Valid Registration Certificate issued by KSPHCL None None None None Be Registered with GST Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Valid Registration Certificate issued by Competent Authority None None None None Income Tax returns & PAN Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Income Tax returns and PAN certificates None None None None Be Registered with EPF Authorities Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- EPF Registration Certificate None None None None ITT 3.3 (c)- Each Tenderer should further demonstrate Liquid assets and /or availability of credit facilities of no less than Rs.40.10 Lakhs (Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc (Unconditional) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Letter of Credit Certificates from Nationalized / Scheduled banks for meeting the fund requirement None None None None ITT 3.2 - To qualify for award of this contract, each Tenderer / company in his / its name should have in the last five years i.e. 2019-20 to 2023-24 (c) Executed in any one year the minimum quantities of work executed (Please refer Tender Document) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Certificate issued from not below the rank of an Executive Engineer or equivalent. None None None None ITT 3.2 - To qualify for award of this contract, each Tenderer in his/her/their name should have in the last five years i.e. 2019-20 to 2023-24: (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.293.74 Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Attach Certificate from Registered Chartered Accountant with UDIN Number None None None None 1.8 of Section-3 Qualification Information: Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are Proposed to be deployed on this contract, if awarded. Others Others createdTs version createdDate modifiedDate documentName None None None None Others -- Organization Chart & Company Profile
tenderCriterionDocumentList	documentName optional documentTypeText KSPH & IDCL Registration Certificate True Technical Bid Class-III & above Civil registered contractor of State PWDs / Central/MES/Govt. Undertakings True Technical Bid Income Tax returns & PAN True Technical Bid EPF Registration Certificate True Technical Bid Work Done Certificate - ITT 3.2 b Similar nature Work done certificate True Technical Bid Liquid assets and availability of credit facilities True Technical Bid Turnover Certificate - ITT 3.2 a True Technical Bid 1.3.of Section-3 Qualification Information True Technical Bid 1.4.of Section-3 Qualification Information True Technical Bid 1.7.of Section-3 Qualification Information True Technical Bid GST Registration Certificate True Technical Bid Executed minimum quantities of work - ITT 3.2 c True Technical Bid Work Done Certificate - ITT 3.2 d Electrical Work done certificate True Technical Bid Work Done Certificate - ITT 3.2 e Water supply /sanitary Work done certificate True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1725003220000 version 0 createdDate None modifiedDate None blockNumber No.59, Richmond Road (Gen. K.S.Thimmaiah Road) street None city Bengaluru state Karnataka pin 560025
tenderRecallDTO	None