createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1725015950917 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 930.00 emd 100000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 09-09-2024 16:00:00 tenderQueryClose 06-09-2024 17:00:00 technicalBidOpen None publishedDate 30-08-2024 16:42:10 publishedByPost RDPR_EE_DIV_MYS publishedByUser KPE12940 - S VEERESH bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson jacob splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 8123267587 tenderSupplierList None
tenderSchedule	createdTs 1725015950959 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT8440 title Repair Of Building and Construction Of 02 Panchakarma Rooms in First Floor at Mysore Ayurvedic Hospital Hinkal Mysore (GEN) description Repair Of Building and Construction Of 02 Panchakarma Rooms in First Floor at Mysore Ayurvedic Hospital Hinkal Mysore (GEN) category WORKS categoryText Works ecv 3715854.57 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 960 locationName RDPR Division Office Mysuru provisionalAmount 4000000.0 groupOverheadTotal 566825.3 fileNumber AEE/MYS/24-25/36
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1725015951000 0 None None Buildings Repair Of Building and Construction Of 02 Panchakarma Rooms in First Floor at Mysore Ayurvedic Hospital Hinkal Mysore (GEN) 3149029.27 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3888012 149394 None code01 Demolishing R.C.C. work manually/ by mechanical means including stack- ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. (SR-2023-24, Volume-II, Chapter-19,Page No.187, Item No.19.3) Cum 2498.78 2498.78 3.91 False None None False None False 9770.2298 0 3888013 149394 None code02 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. .G.S. Sheet. (SR-2023-24, Volume-II, Chapter-19,Page No.189, Item No.19.27.1) Sqm 112.27 112.27 49.8 False None None False None False 5591.046 0 3888014 149394 None code03 Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar. (SR-2023-24, Volume-II, Chapter-19,Page No.187, Item No.19.7.3) Cum 1059.87 1059.87 2.86 False None None False None False 3031.2282 0 3888015 149394 None code04 Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification. (SR-2023-24, Volume-II, Chapter-20,Page No.206, Item No.20.90) Sqm 370.8 370.8 30.21 False None None False None False 11201.868 0 3888016 149394 None code05 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m .(SR-2023-24, Volume-I, Chapter-01,Page No.05, Item No.1.4.1). Cum 249.26 249.26 38.42 False None None False None False 9576.5692 0 3888017 149394 None code06 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications..Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.15, Item No.2.1.3) Cum 6168.67 6168.67 13.89 False None None False None False 85682.8263 0 3888018 149394 None code07 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. .M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.15, Item No.2.2.3) Cum 6852.38 6852.38 5.18 False None None False None False 35495.3284 0 3888019 149394 None code08 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (SR-2023-24, Volume II, Chapter-05, Page No.09, Item No. 5.4) Cum 6580.67 6580.67 10.21 False None None False None False 67188.6407 0 3888020 149394 None code09 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(SR-2023-24, Volume II, Chapter-05, Page No.09, Item No. 5.2) Cum 6816.54 6816.54 7.83 False None None False None False 53373.5082 0 3888021 149394 None code10 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.3.2) Cum 10011.6 10011.6 3.06 False None None False None False 30635.496 0 3888022 149394 None code11 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (SR-2023-24, Volume-I, Chapter-01,Page No.07, Item No.1.9). Cum 273.98 273.98 33.75 False None None False None False 9246.825 0 3888023 149394 None code12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Columns Cum 11982.09 11982.09 2.4 False None None False None False 28757.016 0 3888024 149394 None code13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Beams Cum 11277.26 11277.26 2.97 False None None False None False 33493.4622 0 3888025 149394 None code14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Roof Cum 10572.43 10572.43 12.87 False None None False None False 136067.1741 0 3888026 149394 None code15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Columns Cum 12101.91 12101.91 1.66 False None None False None False 20089.1706 0 3888027 149394 None code16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Lintel Cum 11390.03 11390.03 2.21 False None None False None False 25171.9663 0 3888028 149394 None code17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Beam Cum 11502.8 11502.8 4.93 False None None False None False 56708.804 0 3888029 149394 None code18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (SR-2023-24, Volume-I, Chapter-02,Page No.16, Item No.2.5.2) Roof Cum 10783.88 10783.88 21.73 False None None False None False 234333.7124 0 3888030 149394 None code19 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings. (SR-2023-24, Volume-I, Chapter-02,Page No.18, Item No.2.11.a) Tonne 92140.71 92140.71 5.3107 False None None False None False 489331.668597 0 3888031 149394 None code20 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(SR-2023-24, Volume II, Chapter-06, Page No.9, Item No. 6.5)GROUND FLOOR Sqm 11306.31 11306.31 2.76 False None None False None False 31205.4156 0 3888032 149394 None code21 FIRST FLOOR Cum 11419.37 11419.37 28.09 False None None False None False 320770.1033 0 3888033 149394 None code22 SECOND FLOOR Cum 11532.43 11532.43 11.37 False None None False None False 131123.7291 0 3888034 149394 None code23 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(SR-2023-24, Volume II, Chapter-08, Page No.41.0, Item No. 8.4.2)GROUND FLOOR Cum 262.65 262.65 107.66 False None None False None False 28276.899 0 3888035 149394 None code24 FIRST FLOOR Sqm 265.2 265.2 190.52 False None None False None False 50525.904 0 3888036 149394 None code25 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(SR-2023-24, Volume II, Chapter-08, Page No.41.0, Item No. 8.4.2) GROUND FLOOR Sqm 321.36 321.36 23.99 False None None False None False 7709.4264 0 3888037 149394 None code26 FIRST FLOOR Sqm 324.57 324.57 179.94 False None None False None False 58403.1258 0 3888038 149394 None code27 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge..(SR-2023-24, Volume II, Chapter-08, Page No.42.0, Item No. 8.7) Sqm 380.74 380.74 250.11 False None None False None False 95226.8814 0 3888039 149394 None code28 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete..Size of Tile 600x600 mm. (SR-2023-24, Volume II, Chapter-09, Page No.60.0,Item No. 9.12.2) Sqm 1191.14 1191.14 151.2 False None None False None False 180100.368 0 3888040 149394 None code29 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge..Size of Tile 600x600 mm. (SR-2023-24, Volume II, Chapter-09, Page No.62.0,Item No. 9.20.2) Sqm 217.42 217.42 144.0 False None None False None False 31308.48 0 3888041 149394 None code30 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture. (SR-2023-24, Volume II, Chapter-10, Page No.70.0,Item No. 10.11) Sqm 1539.64 1539.64 144.0 False None None False None False 221708.16 0 3888042 149394 None code31 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (SR-2023-24, Volume-II, Chapter-12,Page No.99, Item No.12.12) Cum 129207.34 129207.34 0.14 False None None False None False 18089.0276 0 3888043 149394 None code32 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (SR-2023-24, Volume II, Chapter-11, Page No.86,Item No. 11.34B) Kg 190.37 190.37 266.12 False None None False None False 50661.2644 0 3888044 149394 None code33 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately):For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. (SR-2023-24, Volume II, Chapter-11, Page No.87,Item No. 11.35.1.1) Sqm 470.21 470.21 58.5 False None None False None False 27507.285 0 3888045 149394 None code34 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications. (SR-2023-24, Volume II, Chapter-11, Page No.89,Item No. 11.37.2) Sqm 1218.19 1218.19 10.8 False None None False None False 13156.452 0 3888046 149394 None code35 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. do- 30 mm thick Both side teak. (SR-2023-24, Volume-II, Chapter-12,Page No.105, Item No.12.57.1) Sqm 4205.93 4205.93 3.71 False None None False None False 15604.0003 0 3888047 149394 None code36 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resist- ance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sand- wiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete .For Curved Portion. (SR-2023-24, Volume II, Chapter-10, Page No.71.0,Item No. 10.15.2) Sqm 4935.18 4935.18 37.35 False None None False None False 184328.973 0 3888048 149394 None code37 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (SR-2023-24, Volume II, Chapter-08, Page No.50.0,Item No. 8.51) Sqm 104.03 104.03 752.22 False None None False None False 78253.4466 0 3888049 149394 None code38 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR-2023-24, Volume II, Chapter-08, Page No.45.0, Item No. 8.28) Sqm 92.58 92.58 502.11 False None None False None False 46485.3438 0 3888050 149394 None code39 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life). (SR-2023-24, Volume II, Chapter-08, Page No.46.0, Item No. 8.33.1) Sqm 164.36 164.36 250.11 False None None False None False 41108.0796 0 3888051 149394 None code40 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (SR-2023-24, Volume II, Chapter-08, Page No.48.0, Item No. 8.41) Sqm 173.73 173.73 22.9 False None None False None False 3978.417 0 3888052 149394 None code41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter. (SR-2023-24, Volume-II, Chapter-13,Page No.125, Item No.13.48) No 302.72 302.72 48.0 False None None False None False 14530.56 0 3888053 149394 None code42 Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). .Medium shade pigment using 50% white cement 50% Grey cement. (SR-2023-24, Volume II, Chapter-09, Page No.59.0,Item No. 9.6.2) Sqm 1227.76 1227.76 85.8 False None None False None False 105341.808 0 3888054 149394 None code43 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (SR-2023-24, Volume II, Chapter-11, Page No.85,Item No. 11.30.2) Sqm 1308.69 1308.69 37.35 False None None False None False 48879.5715 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1725015952000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1725015952000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1725015952000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1725015952000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1725015952000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1725015952000 0 None None ELIGIBILITY Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None 1725015952000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None 1725015952000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1725015952000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1725015952000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1725015952000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1725015952000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1725015952000 0 None None ELIGIBILITY Banker Details for reference None 1725015952000 0 None None ELIGIBILITY Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None 1725015952000 0 None None ELIGIBILITY Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None 1725015952000 0 None None ELIGIBILITY Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None 1725015952000 0 None None ELIGIBILITY Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached) None 1725015964000 0 None None ELIGIBILITY Before tendering for the works the tenderer may inspect the site personally or Site investigation report The tenderer before applying this tender has to visit the site along with Junior /Assistant Engineer/ Assistant Executive Engineer of Mysore PRE sub-Division to know the nature of work and working condition None 1725015973000 0 None None ELIGIBILITY As per the State Government Circular No.FD.295.Expenditure-12 2019 Dt.26-03-2019 any EMD Related exemption certificate will not be considered for this Tender notification None 1725015983000 0 None None ELIGIBILITY GST Registration from Competent authority is compulsory None 1725015993000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund. The tenderer shall abide by the directions of Government towards recovery as modified by the Government from time to time None 1725016006000 0 None None ELIGIBILITY For Other Necessary Document as per Tender Bid Document KW1 and Notification Addendum/Corrigendum will be published in the office notice board for all modifications/corrections, if any None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText The P.R.E.D. or PWD Contractor Civil Registration Certificate Government True Technical Bid Annual Turnover Certificate in all classes of Civil Engineering works only for last Five Financial years i.e., 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 Certified from Charted Accountant Profit and Loss, balance sheet shall be enclosed and UDI number True Technical Bid Work done Certificate For General Category Contractors KW2 of this notification Construction/Improvement/Repair of Building Works of this notification value not less than 50 Percentage of the amount put to tender in any one of the last five financial year period 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 True Technical Bid Tender Capacity as per KW1/KW2 for General Category Eligible Tenderers will be qualified only if their available tender capacity is more than the total tender value The available tender capacity will be calculated as under for General Assessed available tender capacity as per Tender Bid Document KW1/KW2 and also mentioned in Notification True Technical Bid As per PWD Code 251Jurisdiction Contractors registered under class I and II may ender for works anywhere in the state. Contractors registered under class III may tender for works within the districts of the Public works Department circles wherein they are registered. Contractors registered under Class IV may tender for works within the district or within the division whichever is applicable, where they are registered These registrations are valid for all False Technical Bid For Other Necessary Document as per Tender Bid Document KW1/KW2 and Notification False Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None