createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1725006821445 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 697000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 06-09-2024 16:30:00 tenderQueryClose 02-09-2024 16:30:00 technicalBidOpen 09-09-2024 16:40:00 publishedDate 30-08-2024 16:21:21 publishedByPost BBMP_EE_GOV_WEST publishedByUser KPE12814 - PRAKASH K S bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 02-09-2024 16:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Prakash K S splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022975725 mobileNumber 7899225559 tenderSupplierList None
tenderSchedule	createdTs 1725006821473 version 4 createdDate None modifiedDate None tenderNumber BBMP/2024-25/OW/WORK_INDENT3806 title Construction of swimming Pool and other infrastructure works at Chandralayout sub division description Construction of swimming Pool and other infrastructure works at Chandralayout sub division category WORKS categoryText Works ecv 69609583.77 deptName Bruhat Bengaluru Mahanagara Palike status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 874 locationName BBMP Govindrajnagar West provisionalAmount 80000000.0 groupOverheadTotal None fileNumber EE/GRN/TN/GL-04-03/2024-25
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1725006821000 0 None None Other Works Construction of swimming Pool and other infrastructure works at Chandralayout sub division 69609583.77 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3885400 149276 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 112.2 112.2 2386.92 False None None False None False 267812.424 0 3885401 149276 None code02 Providing and Spreading of Sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete. Cum 2394.7 2394.7 47.82 False None None False None False 114514.554 0 3885402 149276 None code03 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 292.6 292.6 1524.25 False None None False None False 445995.55 0 3885403 149276 None code04 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 10 m3) Cum 130.9 130.9 1432.15 False None None False None False 187468.435 0 3885404 149276 None code05 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications(Soling work) Cum 2950.2 2950.2 290.14 False None None False None False 855971.028 0 3885405 149276 None code06 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 6587.9 6587.9 205.39 False None None False None False 1353088.781 0 3885406 149276 None code07 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7318.08 7318.08 663.55 False None None False None False 4855911.984 0 3885407 149276 None code08 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 11404.8 11404.8 71.47 False None None False None False 815101.056 0 3885408 149276 None code09 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings MT 98402.7 98402.7 141.12 False None None False None False 13886589.024 0 3885409 149276 None code10 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 389.4 389.4 362.8 False None None False None False 141274.32 0 3885410 149276 None code11 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel reinforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm 676.5 676.5 362.8 False None None False None False 245434.2 0 3885411 149276 None code12 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete Sqm 1216.6 1216.6 1119.93 False None None False None False 1362506.838 0 3885412 149276 None code13 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Kgs 621.5 621.5 543.2 False None None False None False 337598.8 0 3885413 149276 None code14 Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification Sqm 1025.2 1025.2 204.0 False None None False None False 209140.8 0 3885414 149276 None code15 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 2840.2 2840.2 120.0 False None None False None False 340824.0 0 3885415 149276 None code16 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m Cum 251.9 251.9 1423.71 False None None False None False 358632.549 0 3885416 149276 None code17 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 129.8 129.8 291.6 False None None False None False 37849.68 0 3885417 149276 None code18 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 476.3 476.3 92.11 False None None False None False 43871.993 0 3885418 149276 None code19 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7027.9 7027.9 37.57 False None None False None False 264038.203 0 3885419 149276 None code20 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, abour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7527.17 7527.17 28.73 False None None False None False 216255.5941 0 3885420 149276 None code21 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 10731.6 10731.6 28.04 False None None False None False 300914.064 0 3885421 149276 None code22 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates) Cum 7293.0 7293.0 27.54 False None None False None False 200849.22 0 3885422 149276 None code23 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 12796.41 12796.41 8.38 False None None False None False 107233.9158 0 3885423 149276 None code24 Providing and laying in cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7840.8 7840.8 64.45 False None None False None False 505339.56 0 3885424 149276 None code25 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 11290.95 11290.95 36.84 False None None False None False 415958.598 0 3885425 149276 None code26 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 12043.68 12043.68 12.26 False None None False None False 147655.5168 0 3885426 149276 None code27 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Sqm 1441.0 1441.0 793.09 False None None False None False 1142842.69 0 3885427 149276 None code28 Providing and constructing non-load bearing wall with solid concrete blocks of size 400x100x200mm having a block density not less than 1800kg/m3 having a minimumm average compressive strength of 4.00 N/mm2 confirming to I.S : 2185(Part 1):2005 and constructed withCM 1:4 as per 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc complete as per specifications. Sqm 1214.4 1214.4 53.64 False None None False None False 65140.416 0 3885428 149276 None code29 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing andremoving scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 343.2 343.2 329.2 False None None False None False 112981.44 0 3885429 149276 None code30 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 383.9 383.9 891.32 False None None False None False 342177.748 0 3885430 149276 None code31 Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 471.9 471.9 1311.85 False None None False None False 619062.015 0 3885431 149276 None code32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 110.0 110.0 1220.52 False None None False None False 134257.2 0 3885432 149276 None code33 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge Sqm 55.0 55.0 1220.52 False None None False None False 67128.6 0 3885433 149276 None code34 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. Sqm 121.0 121.0 1220.52 False None None False None False 147682.92 0 3885434 149276 None code35 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 191.4 191.4 1018.93 False None None False None False 195023.202 0 3885435 149276 None code36 Providing Sal wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM complete as per specifications. Cum 108696.5 108696.5 1.09 False None None False None False 118479.185 0 3885436 149276 None code37 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick both side Teak Sqm 4447.3 4447.3 15.36 False None None False None False 68310.528 0 3885437 149276 None code38 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. m 349.8 349.8 45.6 False None None False None False 15950.88 0 3885438 149276 None code39 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side& 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles& rails with PVC Designer beading on either side & joined together with solvent cementadhesiveetc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with3 nos of 75mm Aluminium hinges. Sqm 2244.0 2244.0 12.6 False None None False None False 28274.4 0 3885439 149276 None code40 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1117.6 1117.6 4.0 False None None False None False 4470.4 0 3885440 149276 None code41 Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC (Matching to RAL - 9016) sections and with minimum TiO 2 (Titanium Dioxide) at 6PHR with TPV (Thermo Plastic Vulcanized) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having a overall size of 108mm width x 45mm height with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 30mm x 48.5mm Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware & single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2119mm. Sqm 7407.4 7407.4 31.68 False None None False None False 234666.432 0 3885441 149276 None code42 Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM complete as per specifications. Kgs 184.8 184.8 816.48 False None None False None False 150885.504 0 3885442 149276 None code43 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed,including cost of materials, mortar, labour, curing complete as per specifications Sqm 5860.8 5860.8 44.25 False None None False None False 259340.4 0 3885443 149276 None code44 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Mtr 360.8 360.8 44.25 False None None False None False 15965.4 0 3885444 149276 None code45 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. Sqm 1216.6 1216.6 175.26 False None None False None False 213221.316 0 3885445 149276 None code46 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 898.7 898.7 270.11 False None None False None False 242747.857 0 3885446 149276 None code47 Providing 20mm square M.S.Footrest and fixing in manhole with 1:3:6 cement cocnrete block of 20x20x10cms using 20mm and down size metal of size inlcuding cost of materials, labour charges, curing complete as per specifications. Nos 303.6 303.6 5.0 False None None False None False 1518.0 0 3885447 149276 None code48 Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/s.cm working pressure 160mm outside diameter, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM of equipments and testing, excluding cost of fittings, complete as per specifications. (2 runs) Mtr 677.16 677.16 140.0 False None None False None False 94802.4 0 3885448 149276 None code49 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 13699.69 13699.69 8.52 False None None False None False 116721.3588 0 3885449 149276 None code50 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 12194.23 12194.23 11.6 False None None False None False 141453.068 0 3885450 149276 None code51 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 12946.96 12946.96 17.62 False None None False None False 228125.4352 0 3885451 149276 None code52 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 11290.95 11290.95 38.28 False None None False None False 432217.566 0 3885452 149276 None code53 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Cum 10914.59 10914.59 0.95 False None None False None False 10368.8605 0 3885453 149276 None code54 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle,lock and stopper etc. to be paid separately) including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 5194.2 5194.2 3.6 False None None False None False 18699.12 0 3885454 149276 None code55 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x1200 mm Sqm 1478.4 1478.4 135.7 False None None False None False 200618.88 0 3885455 149276 None code56 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1593.9 1593.9 27.14 False None None False None False 43258.446 0 3885456 149276 None code57 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed,including cost of materials, mortar, labour, curing complete as per specifications Sqm 5860.8 5860.8 211.78 False None None False None False 1241200.224 0 3885457 149276 None code58 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Mtr 360.8 360.8 181.7 False None None False None False 65557.36 0 3885458 149276 None code59 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. Sqm 8747.2 8747.2 41.4 False None None False None False 362134.08 0 3885459 149276 None code60 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. Kgs 125.54 125.54 11022.54 False None None False None False 1383769.6716 0 3885460 149276 None code61 Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel, bottom sheet of 0.40mm steel with powder coated finish. The precoated sheet shall be of minimum 240MPa steel conforming to IS 14246 : 1995 and shal have zinc coating with minimum 120gsm as per IS 277:1992,.The roofing system shall have suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre-painted aluminium cap unit with build in seal arrangments. The entire roof shall be firmly fastened to the existng frame including all lead and lifts, loading & unloading ,usage charges of machinery and equipments, transportation charges,labour charges and all other incidental charges etc.,complete as per standard technical detailed specifications and as directed by the Engineer in charge of the work.50mm thickness Sqm 2883.05 2883.05 294.52 False None None False None False 849115.886 0 3885461 149276 None code62 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete.For Straight Portion Sqm 4431.78 4431.78 332.0 False None None False None False 1471350.96 0 3885462 149276 None code63 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 311.3 311.3 370.08 False None None False None False 115205.904 0 3885463 149276 None code64 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete.For Straight Portion Sqm 4387.9 4387.9 108.72 False None None False None False 477052.488 0 3885464 149276 None code65 Fabricating ,providing and erecting in position of MS Hot Dip Galvanized Sq. Hallow Poles of 132 x 132 Heavy gauge of length 3000mm with MS . Hot dip galvanized grill work as per approved design and drawing of Chief a rchitect. Using 12 x 75mm galvanized flat for alround frame and 20mm x 20mm galvanized-forged design with square for vertical at 150mm C/C as shown in the drawing including providing forged ornamental arrowhed at top and bottom. The work is inclusive of throughing flat, square rods , placing welding all the joints , including grinding finishing 2 coats of anticorrosive paint over one coat of metal primer. The rate is inclusive of allmaterials like MS Hollow galvanized pipe, flats, forged square rods, cost of labour for all items of items of work cost painting, welding, cutting, grinding with all lead and lift as per specification including loading and unloading with cost and conveyance of all materials, labour machinery and incidental charges for the sucessful completion of the work as per the direction Engineering-in- charge for the work (APPROVED RATE). Sqm 9144.0 9144.0 19.8 False None None False None False 181051.2 0 3885465 149276 None code66 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped,probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test etc.complete. Nos 5816.8 5816.8 1.0 False None None False None False 5816.8 0 3885466 149276 None code67 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc.,complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes,collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) 0.00 to 50.00 mtrs Mtr 407.0 407.0 50.0 False None None False None False 20350.0 0 3885467 149276 None code68 50.00 to 100.00 mtrs Mtr 510.4 510.4 50.0 False None None False None False 25520.0 0 3885468 149276 None code69 100.00 to 150.00 mtrs Mtr 542.3 542.3 50.0 False None None False None False 27115.0 0 3885469 149276 None code70 150.00 to 200 mtrs Mtr 629.2 629.2 50.0 False None None False None False 31460.0 0 3885470 149276 None code71 200 to 250 mtrs Mtr 738.1 738.1 50.0 False None None False None False 36905.0 0 3885471 149276 None code72 250 to 300 mtrs Mtr 814.0 814.0 50.0 False None None False None False 40700.0 0 3885472 149276 None code73 300 to 350 mtrs Mtr 954.8 954.8 15.0 False None None False None False 14322.0 0 3885473 149276 None code74 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. Mtr 193.3 193.3 20.0 False None None False None False 3866.0 0 3885474 149276 None code75 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 250mm dia. Mtr 1401.4 1401.4 20.0 False None None False None False 28028.0 0 3885475 149276 None code76 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work.12.50 HP - 90 LPM @ 264 m = 24 STG Outlet Dia - 2.00” Nos 70540.8 70540.8 1.0 False None None False None False 70540.8 0 3885476 149276 None code77 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 V as per IS-694:2010. 3C x 6 mm2 Mtr 269.5 269.5 660.0 False None None False None False 177870.0 0 3885477 149276 None code78 Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover 50 mm Each 3355.0 3355.0 50.0 False None None False None False 167750.0 0 3885478 149276 None code79 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm Each 1375.0 1375.0 1.0 False None None False None False 1375.0 0 3885479 149276 None code80 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLDirect Online Starter 2) S-D- Star Delta Starter 6 to 15 HP pumps Nos 19250.0 19250.0 1.0 False None None False None False 19250.0 0 3885480 149276 None code81 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Nos 7150.0 7150.0 1.0 False None None False None False 7150.0 0 3885481 149276 None code82 Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) Light Duty GI pipe of 50mm dia Nos 486.2 486.2 3.0 False None None False None False 1458.6 0 3885482 149276 None code83 Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required etc. for: 20.88.6: 50 mm nominal bore Each 726.0 726.0 1.0 False None None False None False 726.0 0 3885483 149276 None code84 Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 50 mm dia GI elbow Nos 293.7 293.7 1.0 False None None False None False 293.7 0 3885484 149276 None code85 Supply and delivery at site wrought middle steel (galvanized) GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI hexagonal nipple Nos 234.3 234.3 1.0 False None None False None False 234.3 0 3885485 149276 None code86 Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI collar: Mtr 293.7 293.7 1.0 False None None False None False 293.7 0 3885486 149276 None code87 Fabrication supplying and mounting MS box of 14 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished 2 coats of red oxide primer paint and finally finished with approved colour enamelled metal paint etc., complete Sq CM 0.55 0.55 10000.0 False None None False None False 5500.0 0 3885487 149276 None code88 Supplying and fixing angle iron frame fabricated out of MS Angle iron and MS flat with Bolts,watches etc and painted with finished with 2 coats of red oxide primer paint and finally finished with approved colour enamelled metal paint etc., complete Mtr 434.5 434.5 4.0 False None None False None False 1738.0 0 3885488 149276 None code89 Supplying of TPST with rewirable porcelain channels in SM enclosure 32 amps made out of 14 SWG Powder coated painted of Approved color. Nos 1871.1 1871.1 1.0 False None None False None False 1871.1 0 3885489 149276 None code90 Supplying and fixing 20''x20''x2.5'' ppolished wood board made of not less than 15mm thick plan on both sides with planks made out of more than two pieces and fixing the same to the wall using tapered inverted wooden plugs, screws etc . Nos 358.74 358.74 1.0 False None None False None False 358.74 0 3885490 149276 None code91 Supplying and fixing of LED type panel boradindicating lamp with required color suitable for 220v A.C 50 Hz 12/24v D.C Group-A . Nos 566.5 566.5 1.0 False None None False None False 566.5 0 3885491 149276 None code92 Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 volts 3 phase and wired after fixing to the existing wooden board for motor Upto 12.5 HP Nos 8200.5 8200.5 1.0 False None None False None False 8200.5 0 3885492 149276 None code93 Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor up to 20 HP capacities. Nos 994.42 994.42 1.0 False None None False None False 994.42 0 3885493 149276 None code94 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments to GTP of GROUP-A 4 sqmm. Mtr 69.3 69.3 30.0 False None None False None False 2079.0 0 3885494 149276 None code95 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinary capacitor in KVAR. Rating Nos 2 KVAR capacity Kvar 528.0 528.0 1.0 False None None False None False 528.0 0 3885495 149276 None code96 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40 A TPN. Each 3348.4 3348.4 1.0 False None None False None False 3348.4 0 3885496 149276 None code97 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., is to be established through GI wire of size as per ISI specification 7.3.3 of IS 732 using 12 mm dia Job 4125.0 4125.0 1.0 False None None False None False 4125.0 0 3885497 149276 None code98 Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe: Medium Duty GI pipe of 40mm dia Mtr 536.8 536.8 3.0 False None None False None False 1610.4 0 3885498 149276 None code99 Providing, Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work. 3.5x6 Sqm Each 412.5 412.5 1.0 False None None False None False 412.5 0 3885499 149276 None code100 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. Job 1595.0 1595.0 1.0 False None None False None False 1595.0 0 3885500 149276 None code101 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A Nos 441.1 441.1 1.0 False None None False None False 441.1 0 3885501 149276 None code102 Yield testing of borewells at final depth with a minimum of 10 hours continuously with the help of pump testing unit including the cost of transportation charges, crew charges and cost of consumables. Each 17936.6 17936.6 1.0 False None None False None False 17936.6 0 3885502 149276 None code103 Supply and Assembling of TOTALLY ANTI-CORROSIVE, Bobbin wound FRP fivbre glass Pressure and filter 1200mm diameter Fitted with pressure gauge panel, manual air bleeder water drain and emptying plug with collector arms and diffuser made from unplasticized pvc and polypropylene, including multiport valve -5 valve for filtration, suction, back wash, rinse, close & recirculation. Filtration velocity 40cum/hr/sqm. Maximum working pressure 2.5 kg/cm2, 3 inch connection, Flow rate =43 cum/hrs. Nos 536250.0 536250.0 4.0 False None None False None False 2145000.0 0 3885503 149276 None code104 Supply and fix pump & motors with 3 HP mono block pump 10-12 mtr head flow rate of 56 cu.mt/ hr with necessary ms base plate, clamps for foundation with nuts & bolts. Nos 110000.0 110000.0 5.0 False None None False None False 550000.0 0 3885504 149276 None code105 Supply and fixing of SS prefilter with 110mm plange connections flow rate of 56 cu.mt/hr with necessary nuts & bolts. Nos 96250.0 96250.0 5.0 False None None False None False 481250.0 0 3885505 149276 None code106 Supplying and fixing of floor/Return inlets. Adjustable flow Made in white ABS Plastic, screws in SS 2" external thread and 50mm dia. Solvent Max Flow Rate 5000 Lts/hour. Nos 3162.5 3162.5 55.0 False None None False None False 173937.5 0 3885506 149276 None code107 Supplying and fixing of Stainless Steel 5 Steps Ladder 40mm dia SS 316 Grade Steps and rails complete with fixing anchors and earth connections Mixed Model Deluxe Model Steps Nos 66000.0 66000.0 4.0 False None None False None False 264000.0 0 3885507 149276 None code108 Supplying and fixing of Stainless Steel 3 Steps Ladder 40mm dia SS 316 Grade Steps and rails complete with fixing anchors and earth connections Mixed Model Deluxe Model Steps Nos 57750.0 57750.0 4.0 False None None False None False 231000.0 0 3885508 149276 None code109 Grating: Supply and fixing grating in White ABS Plastic 295 mm wide and 25mm high, UV protected Exclusive of GST Rmtr 5500.0 5500.0 160.0 False None None False None False 880000.0 0 3885509 149276 None code110 Supplying and Assembling of cleaning equipments like Algae brush, shallow net, deep net wall brush, floor brush, test kit etc., complete Make: Certikin/ Aqvastar Exclusive of GST Set 49500.0 49500.0 1.0 False None None False None False 49500.0 0 3885510 149276 None code111 Supplying and fixing of 450 mm x 450 mm SS 316 Grade Heavy Duty suction drain grill with frame 14 guage Make: Customize Exclusive of GST Nos 46750.0 46750.0 4.0 False None None False None False 187000.0 0 3885511 149276 None code112 Supplying of Silicon Sand Coarse grade 0.4 to 0.8 mm Exclusive of GST Kg 35.75 35.75 4000.0 False None None False None False 143000.0 0 3885512 149276 None code113 Supplying of Silicon Sand Coarse grade 1.0 mm to 2.0 mm Exclusive of GST Kg 35.75 35.75 1000.0 False None None False None False 35750.0 0 3885513 149276 None code114 Supplying of depth marking tiles and safety signages Exclusive of GST Nos 893.75 893.75 100.0 False None None False None False 89375.0 0 3885514 149276 None code115 Supply of Lane hooks/anchor cups in SS 316 grade 100mm x 100mm Make: Customize Exclusive of GST Nos 8250.0 8250.0 16.0 False None None False None False 132000.0 0 3885515 149276 None code116 Supply of Trolly mount suction sweeper. Heavy duty including 3 HP self priming pump (Kirloskar Make) 1 no SS Vaccum head 1 No SS pre filter - 1 No and rope 30 mtr long and hose pipe 75 mm 30 mtr long Exclusive of GST Set 233750.0 233750.0 1.0 False None None False None False 233750.0 0 3885516 149276 None code117 Supplying and erection of control panel with 3 phase for providing power supply to filters pumps 3 HP - 3 Nos and including starter, ammeter, voltmeter, ELCB, selector switch etc for complete unit Exclusive of GST Nos 206250.0 206250.0 1.0 False None None False None False 206250.0 0 3885517 149276 None code118 Provide and fixing of puddle pipe 750mm long using PVC 10kg/ cm² grade Make: Astral/supreme/Finolex/Ashrivad 63mm (2") Dia Exclusive of GST Nos 2337.5 2337.5 4.0 False None None False None False 9350.0 0 3885518 149276 None code119 Provide and fixing of puddle pipe 750mm long using PVC 10kg/ cm² grade Make: Astral/supreme/Finolex/Ashrivad 75mm (2.5") Dia Exclusive of GST Nos 2887.5 2887.5 4.0 False None None False None False 11550.0 0 3885519 149276 None code120 Provide and fixing of puddle pipe 750mm long using PVC 10kg/ cm² grade Make: Astral/supreme/Finolex/Ashrivad 90mm (3") Dia Exclusive of GST Nos 4812.5 4812.5 4.0 False None None False None False 19250.0 0 3885520 149276 None code121 Provide and fixing of puddle pipe 750mm long using PVC 10kg/ cm² grade Make: Astral/supreme/Finolex/Ashrivad 110mm (4") Dia Exclusive of GST Nos 6050.0 6050.0 12.0 False None None False None False 72600.0 0 3885521 149276 None code122 Provide and fixing of puddle pipe 750mm long using PVC 10kg/ cm² grade Make: Astral/supreme/Finolex/Ashrivad 160mm (6") Dia Exclusive of GST Nos 9625.0 9625.0 14.0 False None None False None False 134750.0 0 3885522 149276 None code123 Provide and fixing of dia NON Return / check Valves including all necessary fittings, Make: Aqvaatar/Equivalent 110mm (4") Dia Exclusive of GST Nos 26125.0 26125.0 4.0 False None None False None False 104500.0 0 3885523 149276 None code124 Providing and laying PVC 10 Kg/cm2 pipes and specials fixing in position using solvent cement and pressure checking at 3kg/cm2 at all joints about 24 hours continously also including necessary roof / wall/floor/anchoring with clamp and bolts duly painted Make: Astral/supreme/Finolex with ISI Mark 63mm (2") Dia Exclusive of GST Rmtr 1265.0 1265.0 90.0 False None None False None False 113850.0 0 3885524 149276 None code125 Providing and laying PVC 10 Kg/cm2 pipes and specials fixing in position using solvent cement and pressure checking at 3kg/cm2 at all joints about 24 hours continously also including necessary roof / wall/floor/anchoring with clamp and bolts duly painted Make: Astral/supreme/Finolex with ISI Mark 75mm (2.5") Dia Exclusive of GST Rmtr 1848.0 1848.0 90.0 False None None False None False 166320.0 0 3885525 149276 None code126 Providing and laying PVC 10 Kg/cm2 pipes and specials fixing in position using solvent cement and pressure checking at 3kg/cm2 at all joints about 24 hours continously also including necessary roof / wall/floor/anchoring with clamp and bolts duly painted Make: Astral/supreme/Finolex with ISI Mark 90mm (3") Dia Exclusive of GST Rmtr 2640.0 2640.0 110.0 False None None False None False 290400.0 0 3885526 149276 None code127 Providing and laying PVC 10 Kg/cm2 pipes and specials fixing in position using solvent cement and pressure checking at 3kg/cm2 at all joints about 24 hours continously also including necessary roof / wall/floor/anchoring with clamp and bolts duly painted Make: Astral/supreme/Finolex with ISI Mark 110mm (4") Dia Exclusive of GST Rmtr 4015.0 4015.0 110.0 False None None False None False 441650.0 0 3885527 149276 None code128 Providing and laying PVC 10 Kg/cm2 pipes and specials fixing in position using solvent cement and pressure checking at 3kg/cm2 at all joints about 24 hours continously also including necessary roof / wall/floor/anchoring with clamp and bolts duly painted Make: Astral/supreme/Finolex with ISI Mark 160mm (6") Dia Exclusive of GST Rmtr 8525.0 8525.0 260.0 False None None False None False 2216500.0 0 3885528 149276 None code129 Supply of Back stroke indicator pipe 2m high with Deck sleeve dia, 450mm long below GL as per drawing in SS 304 grade Exclusive of GST Nos 39875.0 39875.0 8.0 False None None False None False 319000.0 0 3885529 149276 None code130 Supply and fixing of Grab rail 43 mm dia 1.5 mtr long in SS 316 grade Exclusive of GST Nos 17875.0 17875.0 20.0 False None None False None False 357500.0 0 3885530 149276 None code131 Supply of start up chemicals for pool commissioning and operation including chlorine, muriatic aacid, alum and soda ash and maintainence and training for 1 month Exclusive of GST Nos 96250.0 96250.0 1.0 False None None False None False 96250.0 0 3885531 149276 None code132 Supply and fixing of SS starting blocks (Make Indian) Exclusive of GST Nos 165000.0 165000.0 6.0 False None None False None False 990000.0 0 3885532 149276 None code133 Supplying of antiwave lanes 110mm dia 25m length Exclusive of GST Nos 68750.0 68750.0 10.0 False None None False None False 687500.0 0 3885533 149276 None code134 Supplying of MS Powder quoted lane winders Exclusive of GST Nos 96250.0 96250.0 3.0 False None None False None False 288750.0 0 3885534 149276 None code135 Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete for:Pipes of SN 8, 200mm dia. m 1137.4 1137.4 90.0 False None None False None False 102366.0 0 3885535 149276 None code136 Providing and fixing Wafer type single flange Butterfly valve conforming to relevant IS 13099/9991 EN GGG40/50 with latest amendments as detailed below of the following diameter and types with TP set and conveying to work site, loading and unloading, stacking etc. with all lead and lift. The rate is inclusive of the cost of valve, TP set, rubber insertion, bolts and nuts and excluding earth work excavation.For PN 10.0 (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.For Valve of PN 10.00 and 100MM Each 6433.9 6433.9 14.0 False None None False None False 90074.6 0 3885536 149276 None code137 For Valve of PN 10.00 and 150MM Each 13808.3 13808.3 14.0 False None None False None False 193316.2 0 3885537 149276 None code138 For Valve of PN 10.00 and 200MM Each 15368.1 15368.1 6.0 False None None False None False 92208.6 0 3885538 149276 None code139 Steel Almirah with Shelves & Locker Glass Door 6.6 Feet 18x20 Gauge Size: 198cm H x 91.5cm W x 48cm D. Size: 78"x36"x19" Nos 10324.0 10324.0 15.0 False None None False None False 154860.0 0 3885539 149276 None code140 Steel Tubular Table (With one shelf and 3 Drawers) (Steel Top) Size: 4.5L x 2.5W x 2.5H, Size: 54" x 30" x 30" Nos 5984.0 5984.0 15.0 False None None False None False 89760.0 0 3885540 149276 None code141 Computer Table with Three drawers with Sliding key Board Size: 48"x24"x30" (4'x2'x2.5') Nos 7960.0 7960.0 3.0 False None None False None False 23880.0 0 3885541 149276 None code142 Computer Room Chair with PU Arm Hand Rest Size: 82 to 92cms H x 65cm W x 65cm D Nos 4152.0 4152.0 3.0 False None None False None False 12456.0 0 3885542 149276 None code143 Three Seater Perforated Chair Nos 6750.0 6750.0 3.0 False None None False None False 20250.0 0 3885543 149276 None code144 Supply and installation of Treadmill of Speed: 0.5 25km / h (0.3 15mi /h), AC3Hp (10.5Hp max) Power of the motor. Incline Rate : 0% 16%, Input power : 120V or 220V, 50Hz 60Hz Features : self tracking roller, antiskid grippers, USB socket, shock absorption system, convenience function, wireless mobile recharger , wireless heart measurement, pre-lubricated deck, Running area W530 X L1600mm (21inchs x63inchs), maximum user weight 200kgs. Display info : time, distance, calory, speed, incline, heart rate. Inclusive of all taxes and Transportation. Nos 678895.0 678895.0 2.0 False None None False None False 1357790.0 0 3885544 149276 None code145 Supply and installation of Elliptical of Resistance Level: 20 Levels, Power Requirements : 120 volts, Set up height : 4, 10 Workout Programs :Manual, random, interval, custom interval, 10K Features : Heart rate monitoring, space-efficient footprint, patented MultiGrip handlebars, water bottle holder, Workout boosters X-Mode, ArmBlaster, GluteKicker, Dedicated logic programming, quick start, auto quick start, cool down, heart logic intelligence, wireless & Digital heart rate, Heart rate-controlled programs, maximum user weight 180kgs. Inclusive of all taxes and transportation Nos 270174.0 270174.0 3.0 False None None False None False 810522.0 0 3885545 149276 None code146 Supply and installation of Bike H775 Technical specifications:- resistance level : 8 levels, no-friction magnetic resistance. Powe r:1.5 volts x2, aa size battery. Fly wheel : 5 kgs precision balanced Drive syatem : center design drive, super silent poly-v belt driven. Pedals : self balanced with adjustable straps.Seat : ergonomically designed easy seat with flex back cushion contoures for lumbar support with horizontal slide adjustment handle bars :side handle bar with contact heart rate sensor and u bar style front Handle. display : Icd display, single window computerized console.Display : multi read out instantly displays time, speed, distance, calories, pulse, odo and scan. user weight : 100 kgs.Frame structure : extra sturdy and stable steel frame construction for maximum durability and stability, frame to be finished with proprietary two coat powder process. Inclusive of all taxes and Transportation. Nos 264631.0 264631.0 1.0 False None None False None False 264631.0 0 3885546 149276 None code147 Supply and installation of BH H772 Upright Bike : 130 x 62 x 142 cm Weight LED 64.6 kg / TV 67 kg Resistance system Electromagnetic brake Intensity 24 levels Power 250 w,Self generating LED Yes / TV No,Transmission system Poly-V belt,Type of monitor LED / SmartFocus,Vertical Saddle adjustment Yes,Horizontal saddle adjustment Yes,In-built fan No,Heart rate sensor on handrails Yes,Wireless chest strap Optional Bottle holder Yes,Wheels for transport Yes. Inclusive of all taxes and Transportation. Nos 202283.0 202283.0 1.0 False None None False None False 202283.0 0 3885547 149276 None code148 Supply and installation of Lexco Seated Chest Press : Product size: W1,437 L1,430 H1,940mm (56.6 " 56.3" 76.4 "),Weight: 282kg (622lb) ,block weight: 100kg (220lb) Material: involute pipe 50 X 105 3.0T,outer cover : ABS material double sided block cover urethane foam (memory foam) sheet Characteristic Improved muscle handle angle implementing the shrinkage start bar to control the movement start position to expand the range of motion step 10 the gas spring absorber + rack gear type elevator saddle ABS material covers both sides of the block. Inclusive of all taxes and Transportation. Nos 433988.0 433988.0 2.0 False None None False None False 867976.0 0 3885548 149276 None code149 Supply and installation of Olympic Plates -Olympic Rubberised Plates with 51mm diameter with top quality rubber coating for safety and Metal Ring for Durability. : 10kgs-8 nos,15 kgs 6 nos, 20kgs-4 nos , 25 kgs - 4 nos(270 kgs). Inclusive of all taxes and Transportation. Nos 117801.0 117801.0 2.0 False None None False None False 235602.0 0 3885549 149276 None code150 Supply and installation of Rubberised Hex Dumbells- Solid steel head, pressed and welded to a chrome handle with quality knurling for better grip.Rubber coating. Weight indicators permanently moulded into the heads: 2.5-6nos,5-6nos,10-4nos,12.5-4nos,15-4nos,17.5-2nos,20-2nos,22.5-2nos,25-2nos,27.5-2nos,30-2nos(480 kgs) Inclusive of all taxes and Transportation. Nos 177480.0 177480.0 1.0 False None None False None False 177480.0 0 3885550 149276 None code151 Supply and installation of Two Tier Dumbell Rack : Dumbells Rack , Two Tier Dumbell Storage rack , heavy duty made in steel 12 gauge pipes with 3 coates of Lycra. Inclusive of all taxes and Transportation. Nos 31174.0 31174.0 1.0 False None None False None False 31174.0 0 3885551 149276 None code152 Supply and installation of Swiss ball - Quality, Safety, Durability Anti-Burst Gym Ball made with the highest quality PVC material available - Fitness balls anti-slip matte surface, anti-burst design ensures safe use. set 3 balls 55cms(1200)65cms(1400)75cms (1750), Inclusive of all taxes and Transportation. Nos 6027.0 6027.0 2.0 False None None False None False 12054.0 0 3885552 149276 None code153 Supply and installation of Three Fold Excrcise Mats: Foldable Exercise mats made with high quality anti sweat absorbing resin . Inclusive of all taxes and Transportation. Nos 5067.0 5067.0 3.0 False None None False None False 15201.0 0 3885553 149276 None code154 Providing & constructing standard rubber flooring for indoor areas using rubber membrane 12 to 16 mm thick, to be layed over cement mortar using 1;6 beneath rubber membrane including cost of all materials ,labour ,packing joints and mortar, finishing,curing all lead and lift as per direction of engineer incharge of work Sqm 4882.0 4882.0 150.0 False None None False None False 732300.0 0 3885554 149276 None code155 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 5321.8 5321.8 8.0 False None None False None False 42574.4 0 3885555 149276 None code156 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 3390.2 3390.2 8.0 False None None False None False 27121.6 0 3885556 149276 None code157 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Unit 4899.4 4899.4 5.0 False None None False None False 24497.0 0 3885557 149276 None code158 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 1342.0 1342.0 4.0 False None None False None False 5368.0 0 3885558 149276 None code159 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Unit 545.6 545.6 12.0 False None None False None False 6547.2 0 3885559 149276 None code160 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g Nos 182.6 182.6 75.0 False None None False None False 13695.0 0 3885560 149276 None code161 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Nos 891.0 891.0 80.0 False None None False None False 71280.0 0 3885561 149276 None code162 Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms Nos 140.8 140.8 85.0 False None None False None False 11968.0 0 3885562 149276 None code163 Providing and fixing in position brass stop cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specifications. 15 Nominal Bore Nos 328.9 328.9 100.0 False None None False None False 32890.0 0 3885563 149276 None code164 20 Nominal Bore Nos 335.5 335.5 110.0 False None None False None False 36905.0 0 3885564 149276 None code165 Providing and fixing in position brass bib cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specifications. Nos 335.5 335.5 150.0 False None None False None False 50325.0 0 3885565 149276 None code166 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. Nos 110.0 110.0 12.0 False None None False None False 1320.0 0 3885566 149276 None code167 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Sqm 3067.9 3067.9 4.2 False None None False None False 12885.18 0 3885567 149276 None code168 Providing and fixing bright finished brass hard drawn hooks and eyes :300mm Each 92.4 92.4 12.0 False None None False None False 1108.8 0 3885568 149276 None code169 Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete.(External work and Burried). 25mm.dia.. Mtr 325.6 325.6 150.0 False None None False None False 48840.0 0 3885569 149276 None code170 32mm.dia.. Mtr 409.2 409.2 175.0 False None None False None False 71610.0 0 3885570 149276 None code171 40mm.dia.. Mtr 524.7 524.7 190.0 False None None False None False 99693.0 0 3885571 149276 None code172 Providing & fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete.(Concealed work including cutting chasing and good the walls etc). 15mm.dia.. Mtr 339.9 339.9 120.0 False None None False None False 40788.0 0 3885572 149276 None code173 20mm.dia.. Mtr 416.9 416.9 135.0 False None None False None False 56281.5 0 3885573 149276 None code174 25mm.dia.. Mtr 524.7 524.7 150.0 False None None False None False 78705.0 0 3885574 149276 None code175 Providing and fixing water meter with stop cock, jam nut, socket in G.I pipe line including cutting and threading the pipe and making long screws including cost of all materials, labour , HOM of equipments and testing complete as per specifications. Set 1452.0 1452.0 1.0 False None None False None False 1452.0 0 3885575 149276 None code176 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : Nos 365.2 365.2 150.0 False None None False None False 54780.0 0 3885576 149276 None code177 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32mm.dia.. Nos 657.8 657.8 175.0 False None None False None False 115115.0 0 3885577 149276 None code178 40mm.dia.. Nos 772.2 772.2 190.0 False None None False None False 146718.0 0 3885578 149276 None code179 Providing and fixing gun metal non- return valve of approved quality (screwedend): 40 mm nominal bore ,Vertical. Each 1347.5 1347.5 145.0 False None None False None False 195387.5 0 3885579 149276 None code180 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for::a.PVC pipes 75mm dia., 6 kg/sqcm & class 3 b.PVC pipes 110mm dia., 6 kg/sqcm & class 3. BWSSB-SR-2023-2024 75mm.dia.. Mtr 242.0 242.0 160.0 False None None False None False 38720.0 0 3885580 149276 None code181 110mm.dia.. Mtr 452.1 452.1 40.0 False None None False None False 18084.0 0 3885581 149276 None code182 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :*100 mm inlet and 100 mm outlet* Sand Cast Iron S&S as per IS:3989 Each 1531.2 1531.2 100.0 False None None False None False 153120.0 0 3885582 149276 None code183 Providing and fixing PTMT grating of approved quality and colour. Nos 48.4 48.4 115.0 False None None False None False 5566.0 0 3885583 149276 None code184 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in- charge. Each 85.8 85.8 105.0 False None None False None False 9009.0 0 3885584 149276 None code185 Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm diaCirc. B M.H: Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.0 M depth & SFRC cover & frame. BWSSB-2023-24 Nos 31951.7 31951.7 5.0 False None None False None False 159758.5 0 3885585 149276 None code186 Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25 mm dia 2 mm thick m 81.0 81.0 150.0 False None None False None False 12150.0 0 3885586 149276 None code187 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick m 66.0 66.0 450.0 False None None False None False 29700.0 0 3885587 149276 None code188 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick m 78.0 78.0 300.0 False None None False None False 23400.0 0 3885588 149276 None code189 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 32 mm dia 2.5 mm thick m 103.0 103.0 100.0 False None None False None False 10300.0 0 3885589 149276 None code190 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2 mm thick m 68.0 68.0 150.0 False None None False None False 10200.0 0 3885590 149276 None code191 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25 mm dia 2 mm thick m 79.0 79.0 100.0 False None None False None False 7900.0 0 3885591 149276 None code192 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 32 mm dia 2.5 mm thick m 99.0 99.0 70.0 False None None False None False 6930.0 0 3885592 149276 None code193 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. 25 mm m 35.0 35.0 15.32 False None None False None False 536.2 0 3885593 149276 None code194 Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 25 mm m 22.0 22.0 25.0 False None None False None False 550.0 0 3885594 149276 None code195 Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 32 mm m 29.0 29.0 15.0 False None None False None False 435.0 0 3885595 149276 None code196 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 90 x 65 mm No 161.0 161.0 5.0 False None None False None False 805.0 0 3885596 149276 None code197 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3m from tapping point to out let via switch box Point 269.0 269.0 10.0 False None None False None False 2690.0 0 3885597 149276 None code198 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3m upto 6m from tapping point to out let via switch box Point 379.0 379.0 15.0 False None None False None False 5685.0 0 3885598 149276 None code199 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch box Point 555.0 555.0 35.0 False None None False None False 19425.0 0 3885599 149276 None code200 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3m upto 6m from tapping point to out let via switches Point 677.0 677.0 5.0 False None None False None False 3385.0 0 3885600 149276 None code201 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6m upto 10m from tapping point to out let via switches box Point 989.0 989.0 5.0 False None None False None False 4945.0 0 3885601 149276 None code202 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1 mm2 m 19.0 19.0 750.0 False None None False None False 14250.0 0 3885602 149276 None code203 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mm2 m 26.0 26.0 850.0 False None None False None False 22100.0 0 3885603 149276 None code204 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2 m 45.0 45.0 450.0 False None None False None False 20250.0 0 3885604 149276 None code205 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 mm2 m 63.0 63.0 300.0 False None None False None False 18900.0 0 3885605 149276 None code206 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 mm2 m 92.0 92.0 155.0 False None None False None False 14260.0 0 3885606 149276 None code207 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 10 mm2 m 167.0 167.0 50.0 False None None False None False 8350.0 0 3885607 149276 None code208 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2 Way Each 138.0 138.0 6.0 False None None False None False 828.0 0 3885608 149276 None code209 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3 Way Each 159.0 159.0 10.0 False None None False None False 1590.0 0 3885609 149276 None code210 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 Way Each 177.0 177.0 5.0 False None None False None False 885.0 0 3885610 149276 None code211 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way Each 220.0 220.0 6.0 False None None False None False 1320.0 0 3885611 149276 None code212 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way Each 261.0 261.0 4.0 False None None False None False 1044.0 0 3885612 149276 None code213 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way Each 319.0 319.0 5.0 False None None False None False 1595.0 0 3885613 149276 None code214 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16 Way Each 363.0 363.0 2.0 False None None False None False 726.0 0 3885614 149276 None code215 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 18 Way Each 405.0 405.0 2.0 False None None False None False 810.0 0 3885615 149276 None code216 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1-2 Module Each 137.0 137.0 6.0 False None None False None False 822.0 0 3885616 149276 None code217 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 3 Module Each 161.0 161.0 10.0 False None None False None False 1610.0 0 3885617 149276 None code218 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module Each 175.0 175.0 5.0 False None None False None False 875.0 0 3885618 149276 None code219 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module Each 234.0 234.0 6.0 False None None False None False 1404.0 0 3885619 149276 None code220 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module Each 284.0 284.0 4.0 False None None False None False 1136.0 0 3885620 149276 None code221 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module Each 344.0 344.0 5.0 False None None False None False 1720.0 0 3885621 149276 None code222 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 16 Module Each 397.0 397.0 2.0 False None None False None False 794.0 0 3885622 149276 None code223 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 18 Module Each 457.0 457.0 2.0 False None None False None False 914.0 0 3885623 149276 None code224 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch Each 102.0 102.0 90.0 False None None False None False 9180.0 0 3885624 149276 None code225 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket Each 171.0 171.0 20.0 False None None False None False 3420.0 0 3885625 149276 None code226 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module Each 357.0 357.0 20.0 False None None False None False 7140.0 0 3885626 149276 None code227 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch Each 180.0 180.0 5.0 False None None False None False 900.0 0 3885627 149276 None code228 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push Each 177.0 177.0 1.0 False None None False None False 177.0 0 3885628 149276 None code229 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch Each 326.0 326.0 5.0 False None None False None False 1630.0 0 3885629 149276 None code230 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket Each 236.0 236.0 10.0 False None None False None False 2360.0 0 3885630 149276 None code231 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket Each 156.0 156.0 1.0 False None None False None False 156.0 0 3885631 149276 None code232 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O Outlet Cat-6 Each 337.0 337.0 5.0 False None None False None False 1685.0 0 3885632 149276 None code233 Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 80 mm No 15.0 15.0 7.0 False None None False None False 105.0 0 3885633 149276 None code234 Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws. 110 mm No 21.0 21.0 20.0 False None None False None False 420.0 0 3885634 149276 None code235 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2' - 9/10 W Each 551.0 551.0 2.0 False None None False None False 1102.0 0 3885635 149276 None code236 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor grater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W Each 690.0 690.0 30.0 False None None False None False 20700.0 0 3885636 149276 None code237 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @50/60Hz & Power factor greater than 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W Each 1324.0 1324.0 15.0 False None None False None False 19860.0 0 3885637 149276 None code238 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders Each 122.0 122.0 47.0 False None None False None False 5734.0 0 3885638 149276 None code239 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE star rated and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturerWarranty 48" Sweep BEE Star Rated (1200 mm) Each 2677.0 2677.0 20.0 False None None False None False 53540.0 0 3885639 149276 None code240 Supplying wall mounting fan suitable to operate at single phase 230v AC. supply. 300 mm Sweep Each 2492.0 2492.0 2.0 False None None False None False 4984.0 0 3885640 149276 None code241 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 171.0 171.0 5.0 False None None False None False 855.0 0 3885641 149276 None code242 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 315.0 315.0 17.0 False None None False None False 5355.0 0 3885642 149276 None code243 Extra length of GI pipe of class B 19mm dia for down rod. m 197.0 197.0 50.0 False None None False None False 9850.0 0 3885643 149276 None code244 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm) Each 2969.0 2969.0 8.0 False None None False None False 23752.0 0 3885644 149276 None code245 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. Each 707.0 707.0 8.0 False None None False None False 5656.0 0 3885645 149276 None code246 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by ABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 9W, 6500K Each 154.0 154.0 4.0 False None None False None False 616.0 0 3885646 149276 None code247 Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate /clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source LED Floodlight 100W Each 9486.0 9486.0 2.0 False None None False None False 18972.0 0 3885647 149276 None code248 Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency Grater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source LED Floodlight 70W Each 6768.0 6768.0 2.0 False None None False None False 13536.0 0 3885648 149276 None code249 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source. LED Streetlight 70W Each 5992.0 5992.0 4.0 False None None False None False 23968.0 0 3885649 149276 None code250 Supplying and Fixing of........mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe Each 978.0 978.0 4.0 False None None False None False 3912.0 0 3885650 149276 None code251 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires Each 162.0 162.0 4.0 False None None False None False 648.0 0 3885651 149276 None code252 Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top ... mm with 3 mm thick, suitable base plate and 4Nos of.........long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc.,(excluding foundation) as per drawing appended. 6 m - Top 75 mm and Bottom 135 mm dia Each 12700.0 12700.0 4.0 False None None False None False 50800.0 0 3885652 149276 None code253 Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1500 mm Standard 40/50 mm dia Each 2100.0 2100.0 4.0 False None None False None False 8400.0 0 3885653 149276 None code254 Automatic Switch for Street Light No 2303.0 2303.0 1.0 False None None False None False 2303.0 0 3885654 149276 None code255 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair m 21.0 21.0 25.0 False None None False None False 525.0 0 3885655 149276 None code256 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 10 Pair Each 345.0 345.0 1.0 False None None False None False 345.0 0 3885656 149276 None code257 Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set specifications. 62.5KVA/50kw Set 641071.0 641071.0 1.0 False None None False None False 641071.0 0 3885657 149276 None code258 Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....A 4 pole contactor for alternator with thermal O/L relay,..... A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules. 62.5 KVA Set 77768.0 77768.0 1.0 False None None False None False 77768.0 0 3885658 149276 None code259 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts No 4256.0 4256.0 18.0 False None None False None False 76608.0 0 3885659 149276 None code260 GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 6 mm GI strip Mtr 128.0 128.0 70.0 False None None False None False 8960.0 0 3885660 149276 None code261 GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 25 x 6 mm Copper strip Mtr 1100.0 1100.0 25.0 False None None False None False 27500.0 0 3885661 149276 None code262 GI/Copper strips for grounding connections, using necessary fixing materials as required GI/Copper strips 600 x 600 x 3 mm Copper plate Each 7421.0 7421.0 4.0 False None None False None False 29684.0 0 3885662 149276 None code263 RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 No 7076.0 7076.0 3.0 False None None False None False 21228.0 0 3885663 149276 None code264 PSCC Pole - 8 Mtr Long, 140 Kg WL (Dwg No. BESCOM/GM/QS&S/17 Dtd 24.11.2018) as per REC Standards No 2674.0 2674.0 23.0 False None None False None False 61502.0 0 3885664 149276 None code265 11 kV, Special 3 Pin Cross Arm - GI No 1151.0 1151.0 1.0 False None None False None False 1151.0 0 3885665 149276 None code266 HT ST Support 50x8 mm Flat - GI No 121.0 121.0 1.0 False None None False None False 121.0 0 3885666 149276 None code267 Spiral Earth Electrode No 239.0 239.0 26.0 False None None False None False 6214.0 0 3885667 149276 None code268 Anticlimbing Device GI Barbed wire (12 Mtr/Kg) No 89.0 89.0 26.0 False None None False None False 2314.0 0 3885668 149276 None code269 Guarding for Road crossing, Telephone Line Crossing, between HT & LT Line Crossing No 93.0 93.0 5.0 False None None False None False 465.0 0 3885669 149276 None code270 LT 4 Pin Cross Arm - GI No 379.0 379.0 5.0 False None None False None False 1895.0 0 3885670 149276 None code271 No. 8 Strain Insulator No 27.0 27.0 20.0 False None None False None False 540.0 0 3885671 149276 None code272 RCC Pole Clamp - GI No 109.0 109.0 26.0 False None None False None False 2834.0 0 3885672 149276 None code273 Guy Clamp - GI No 115.0 115.0 6.0 False None None False None False 690.0 0 3885673 149276 None code274 11 kV GI Pin for 11 kV Ceramic Shell Insulator No 66.0 66.0 75.0 False None None False None False 4950.0 0 3885674 149276 None code275 DISC Insulator 45 kN Porcelain No 510.0 510.0 12.0 False None None False None False 6120.0 0 3885675 149276 None code276 Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM Km 46234.0 46234.0 3.045 False None None False None False 140782.53 0 3885676 149276 None code277 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM MT 77226.0 77226.0 0.08 False None None False None False 6178.08 0 3885677 149276 None code278 PG Clamp Rabbit to Rabbit No 102.0 102.0 16.0 False None None False None False 1632.0 0 3885678 149276 None code279 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) Each 920.0 920.0 3.0 False None None False None False 2760.0 0 3885679 149276 None code280 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) Set 1069.0 1069.0 1.0 False None None False None False 1069.0 0 3885680 149276 None code281 For 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - GI Set 30694.0 30694.0 1.0 False None None False None False 30694.0 0 3885681 149276 None code282 Three H Frame with Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole up to and including 250 kVA (UG Cable)) - GI Each 46731.0 46731.0 1.0 False None None False None False 46731.0 0 3885682 149276 None code283 11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018) Set 9450.0 9450.0 1.0 False None None False None False 9450.0 0 3885683 149276 None code284 11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification Set 5875.0 5875.0 1.0 False None None False None False 5875.0 0 3885684 149276 None code285 Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr Coil 517.0 517.0 1.0 False None None False None False 517.0 0 3885685 149276 None code286 Caution/Danger Board No 150.0 150.0 6.0 False None None False None False 900.0 0 3885686 149276 None code287 Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Hard Soil Per Pit 1132.0 1132.0 26.0 False None None False None False 29432.0 0 3885687 149276 None code288 Digging of Pit for GUY SET Hard Soil Per Pit 629.0 629.0 6.0 False None None False None False 3774.0 0 3885688 149276 None code289 Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth No 1113.0 1113.0 26.0 False None None False None False 28938.0 0 3885689 149276 None code290 Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) No 93.0 93.0 26.0 False None None False None False 2418.0 0 3885690 149276 None code291 For Three H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole up to and including 250 kVA (UG Cable) (excluding erection of Pole) No 2862.0 2862.0 1.0 False None None False None False 2862.0 0 3885691 149276 None code292 Fixing of 4 Pin cross arm with Insulator and Braces fixing No 160.0 160.0 5.0 False None None False None False 800.0 0 3885692 149276 None code293 Fixing of HT/LT Single Top Support No 112.0 112.0 26.0 False None None False None False 2912.0 0 3885693 149276 None code294 Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT No 266.0 266.0 5.0 False None None False None False 1330.0 0 3885694 149276 None code295 Stringing of conductor Rabbit ACSR, binding of conductor on each insulator and dead ending on strain or disc /strain insulator by means of clamps. Km 4361.0 4361.0 3.045 False None None False None False 13279.245 0 3885695 149276 None code296 Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring No 237.0 237.0 1.0 False None None False None False 237.0 0 3885696 149276 None code297 Fixing of GOS including wiring (11 kV Single Break 200 Amps) No 1104.0 1104.0 1.0 False None None False None False 1104.0 0 3885697 149276 None code298 Numbering and Scheduling of Pole Km 712.0 712.0 1.0 False None None False None False 712.0 0 3885698 149276 None code299 Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 B. CABLE ENTRY TYP 63 kVA, Aluminum Wdg, Star 2 (5 Star) Each 186170.0 186170.0 1.0 False None None False None False 186170.0 0 3885699 149276 None code300 LT Distribution Box for 100/250 kVA DTC with MCCB's (SMC) Each 24428.0 24428.0 1.0 False None None False None False 24428.0 0 3885700 149276 None code301 3 Phase CT/PT operated alternating current Smart Meter of Accuracy Class 0.2s DLMS with GPRS Communication Module Each 29993.0 29993.0 1.0 False None None False None False 29993.0 0 3885701 149276 None code302 LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval (Excluding Meter Cost & Modem Cost) Each 79882.0 79882.0 1.0 False None None False None False 79882.0 0 3885702 149276 None code303 Erection of 25 to 63 kVA Transformer on Transformer Structure No 1193.0 1193.0 1.0 False None None False None False 1193.0 0 3885703 149276 None code304 Erection of LT metering Cubicle on Platform No 1659.0 1659.0 1.0 False None None False None False 1659.0 0 3885704 149276 None code305 GSM modem with connecting cable for remote communicating capabilities No 14415.0 14415.0 1.0 False None None False None False 14415.0 0 3885705 149276 None code306 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 95 Sqmm, (54 GI Wires - 2.5 mm Dia) Km 889666.0 889666.0 0.15 False None None False None False 133449.9 0 3885706 149276 None code307 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm Set 3744.0 3744.0 6.0 False None None False None False 22464.0 0 3885707 149276 None code308 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm Set 4067.0 4067.0 2.0 False None None False None False 8134.0 0 3885708 149276 None code309 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 3x95 to 150 Sqmm Km 61322.0 61322.0 0.15 False None None False None False 9198.3 0 3885709 149276 None code310 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 178973.0 178973.0 0.15 False None None False None False 26845.95 0 3885710 149276 None code311 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) Km 139549.0 139549.0 0.1 False None None False None False 13954.9 0 3885711 149276 None code312 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) Km 118004.0 118004.0 0.15 False None None False None False 17700.6 0 3885712 149276 None code313 Compression type Aluminium Tubular in Line Connector for Aluminum Conductor 16 sqmm No 3.0 3.0 48.0 False None None False None False 144.0 0 3885713 149276 None code314 Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm No 27.0 27.0 32.0 False None None False None False 864.0 0 3885714 149276 None code315 Heavy Duty Copper Terminal Long Barrel 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm No 58.0 58.0 24.0 False None None False None False 1392.0 0 3885715 149276 None code316 Brass Cable Gland 25 No 79.0 79.0 4.0 False None None False None False 316.0 0 3885716 149276 None code317 Brass Cable Gland 32 No 95.0 95.0 4.0 False None None False None False 380.0 0 3885717 149276 None code318 Route & Joint indicating slab with MS Anchor rod No 133.0 133.0 12.0 False None None False None False 1596.0 0 3885718 149276 None code319 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm Km 20886.0 20886.0 0.25 False None None False None False 5221.5 0 3885719 149276 None code320 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm Km 31139.0 31139.0 0.15 False None None False None False 4670.85 0 3885720 149276 None code321 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG Sq CM 0.5 0.5 250000.0 False None None False None False 125000.0 0 3885721 149276 None code322 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. Each 562.0 562.0 4.0 False None None False None False 2248.0 0 3885722 149276 None code323 Supplying and fixing Electronic Trivector Meter (ETV)suitable for operation LT operation and - CT operated meter in polycarbonate body in class0.5 accuracy as per IS 14697 and completely wired. Each 4390.0 4390.0 1.0 False None None False None False 4390.0 0 3885723 149276 None code324 Supplying and fixing of Shunt trip suitable for MCCB.CBCT Each 1703.0 1703.0 1.0 False None None False None False 1703.0 0 3885724 149276 None code325 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. Each 9255.0 9255.0 1.0 False None None False None False 9255.0 0 3885725 149276 None code326 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C Each 515.0 515.0 3.0 False None None False None False 1545.0 0 3885726 149276 None code327 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP Each 415.0 415.0 4.0 False None None False None False 1660.0 0 3885727 149276 None code328 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy Each 9315.0 9315.0 1.0 False None None False None False 9315.0 0 3885728 149276 None code329 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 100 A 25 kA Each 8487.0 8487.0 1.0 False None None False None False 8487.0 0 3885729 149276 None code330 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete 100 A 4 x 30 x 6 mm Aluminium Strips m 2465.0 2465.0 6.0 False None None False None False 14790.0 0 3885730 149276 None code331 Rotary handle for MCCB Each 3748.0 3748.0 1.0 False None None False None False 3748.0 0 3885731 149276 None code332 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN Each 3088.0 3088.0 6.0 False None None False None False 18528.0 0 3885732 149276 None code333 Supplying of on load change over switches 4 poles, AC-23ADuty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 A Each 8534.0 8534.0 1.0 False None None False None False 8534.0 0 3885733 149276 None code334 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP Each 1060.0 1060.0 4.0 False None None False None False 4240.0 0 3885734 149276 None code335 Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm m 305.0 305.0 25.0 False None None False None False 7625.0 0 3885735 149276 None code336 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II - Double Door 12 Way SP & N Each 2329.0 2329.0 1.0 False None None False None False 2329.0 0 3885736 149276 None code337 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 2 pole Each 4559.0 4559.0 2.0 False None None False None False 9118.0 0 3885737 149276 None code338 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP Each 415.0 415.0 10.0 False None None False None False 4150.0 0 3885738 149276 None code339 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. III - Double Door 4 Way TP & N Each 4038.0 4038.0 2.0 False None None False None False 8076.0 0 3885739 149276 None code340 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole Each 5545.0 5545.0 2.0 False None None False None False 11090.0 0 3885740 149276 None code341 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP Each 415.0 415.0 24.0 False None None False None False 9960.0 0 3885741 149276 None code342 Fixing Danger Board Each 80.0 80.0 6.0 False None None False None False 480.0 0 3885742 149276 None code343 Supply and installation in position, testing and commissioning 6kg Fire Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8,C and electrically started Fire, A Rating 3A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,,, labour, usage charges of machinery complete as per specificed.with regards to general guidelines of fire safe Each 2850.0 2850.0 4.0 False None None False None False 11400.0 0 3885743 149276 None code344 Supplying of four bucket stand alongwith buckets. Complete Each 1850.0 1850.0 2.0 False None None False None False 3700.0 0 3885744 149276 None code345 Supplying of Hand gloves. complete Each 975.0 975.0 1.0 False None None False None False 975.0 0 3885745 149276 None code346 Supplying of first aid box. Complete Each 600.0 600.0 1.0 False None None False None False 600.0 0 3885746 149276 None code347 Supplying of SAFETY MASK. Complete Each 150.0 150.0 1.0 False None None False None False 150.0 0 3885747 149276 None code348 Supplying of FIRST AID CHART with lamination. Complete Each 400.0 400.0 2.0 False None None False None False 800.0 0 3885748 149276 None code349 Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications. Each 1900.0 1900.0 4.0 False None None False None False 7600.0 0 3885749 149276 None code350 Removing and refixing Drain Cover slabs (B S Slab and RCC slab) and pointing in CM (1:3) as directed by the Engineer in Charge of the work (excluding GST and Area Leading Charges Sqm 235.0 235.0 948.6 False None None False None False 222921.0 0 3885750 149276 None code351 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead Dismantling Stone Masonry Rubble stone masonry in cement mortar. Cum 671.0 671.0 142.2 False None None False None False 95416.2 0 3885751 149276 None code352 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Cum 266.2 266.2 306.9 False None None False None False 81696.78 0 3885752 149276 None code353 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 6230.4 6230.4 7.199 False None None False None False 44852.6496 0 3885753 149276 None code354 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with Centering. Cum 9389.65 9389.65 123.3 False None None False None False 1157743.845 0 3885754 149276 None code355 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.h. All other type of structures MT 86912.1 86912.1 8.45 False None None False None False 734407.245 0 3885755 149276 None code356 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications Sqm 1354.1 1354.1 38.0 False None None False None False 51455.8 0 3885756 149276 None code357 Providing and fixing RCC precast cover slab of 10 cm thick for drain in cement concrete M20 using graded granite jelly 20mm and down size with steel reinforcement, including formwork, lift charges, curing and concrete finished surfaces on both sides etc., complete as per drawing and directions of engineer-in-charge.Data rate Sqm 2072.0 2072.0 150.66 False None None False None False 312167.52 0 3885757 149276 None code358 Providing and fixing RCC precast cover slab of 23 cm thick for drain in cement concrete M20 using graded granite jelly 20mm and down size with steel reinforcement, including formwork, lift charges, curing and concrete finished surfaces on both sides etc., complete as per drawing and directions of engineer-in-charge.Data rate - Data rate Sqm 5037.0 5037.0 60.0 False None None False None False 302220.0 0 3885758 149276 None code359 Removing & Resetting of Kerb Stones - DATA RATE m 118.0 118.0 930.0 False None None False None False 109740.0 0 3885759 149276 None code360 Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top and bottom width 114 and 165 mm respectively, 400mm high and 450mm in length finished with CM 1:3 plastering and finishing cutting including formwork, curing, including cost of materials, labour charges of machinery, loading and unloading, lead and lift, transportation ete.,complete as directed by the Engineer in Charge of the work (excluding GST and Area Leading Charges) Nos 325.0 325.0 889.0 False None None False None False 288925.0 0 3885760 149276 None code361 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Sqm 119.9 119.9 800.0 False None None False None False 95920.0 0 3885761 149276 None code362 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. Cum 71.5 71.5 257.4 False None None False None False 18404.1 0 3885762 149276 None code363 Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Cum 2633.4 2633.4 223.08 False None None False None False 587458.872 0 3885763 149276 None code364 Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mechanical means. Sqm 48.4 48.4 858.0 False None None False None False 41527.2 0 3885764 149276 None code365 Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom Sqm 13.2 13.2 4894.5 False None None False None False 64607.4 0 3885765 149276 None code366 Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. Dense Graded Bituminous Macadam Grading - II for traffic lesser than 20 MSA Cum 10877.9 10877.9 62.9 False None None False None False 684219.91 0 3885766 149276 None code367 Bituminous Concrete Grading II Using waste plastic Providing and laying Bituminous Concrete with not less than 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.78% Bitumen and waste plastic 8% of Bitumen of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Cum 11740.3 11740.3 195.78 False None None False None False 2298515.934 0 3885767 149276 None code368 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. Sqm 525.8 525.8 143.0 False None None False None False 75189.4 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1725006823000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1725006823000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1725006823000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1725006823000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1725006823000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1725006834000 0 None None ELIGIBILITY ALL TERMS AND CONDITIONS AS PER KW-4 BID DOCUMENT None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None As per KW-4 tender document clause no: A General 3.2 Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Relevant Document None None None None As per KW-4 tender document clause no: A General 3.2(b, c) 1.6(a) & 3.6 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relevant Document None None None None As per KW-4 tender document clause no: A General 3.2(a) & 1.6 (b) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Relevant Document
tenderCriterionDocumentList	documentName optional documentTypeText CONTRACTOR LICENSE COPY True Technical Bid SIMILAR NATURE OF WORK DONE True Technical Bid Annual Turnover Certificate True Technical Bid BID CAPACITY True Technical Bid LINE OF CREDIT True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1725007086000 version 0 createdDate None modifiedDate None blockNumber Office of the Executive Engineer, Govindarajangara Division, 2nd Floor, Shakthi Soudha, 13th Cross Road, 4th B Main Road, M.C.Layout, Vijayanagara street None city Bangalore state Karnataka pin 560040
tenderRecallDTO	None