| 1724917506000 | 1 | None | None | Buildings | Construction of community Toilets at near Mirapaurahatti, Jai Bhim Nagar and Govt Hospital. | 3807400.53 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3877289 | 148794 | None | code01 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. It No. 1.5.1 P.No. 6 In ordinary/soft rock without blasting upto 1.5 m depth S.R 2023-24 (Volume-I) | Cum | 313.95 | 313.95 | 208.76 | False | None | None | False | None | False | 65540.202 | 0 | | 3877290 | 148794 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates No. 2.1.3 P.No. 15 S.R 2023-24 (Volume-I) | Cum | 6288.45 | 6288.45 | 18.12 | False | None | None | False | None | False | 113946.714 | 0 | | 3877291 | 148794 | None | code03 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2023-24 Page No 15 I No 2.3.1 (Volume-I) | Cum | 6639.1 | 6639.1 | 106.18 | False | None | None | False | None | False | 704939.638 | 0 | | 3877292 | 148794 | None | code04 | Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below : Foundation, Sub structure (5%) SI No. 4 P.No. 111 S.R 2023-24 (Volume-I) | Cum | 2323.69 | 2323.69 | 106.18 | False | None | None | False | None | False | 246729.4042 | 0 | | 3877293 | 148794 | None | code05 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge ofwork. PWD SR 2023-24 Page No 14 I No 6.8 (Volume-I) | Cum | 8367.45 | 8367.45 | 86.47 | False | None | None | False | None | False | 723533.4015 | 0 | | 3877294 | 148794 | None | code06 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR 2023-24 Page No 41 I No 8.1.1 (Volume-III) | Sqm | 267.75 | 267.75 | 1452.72 | False | None | None | False | None | False | 388965.78 | 0 | | 3877295 | 148794 | None | code07 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. SR 2023-24 Page No104 I No 12.53(Volume-II) | Sqm | 1667.4 | 1667.4 | 47.25 | False | None | None | False | None | False | 78784.65 | 0 | | 3877296 | 148794 | None | code08 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. SR 2023-24 Page No 104 I No 12.54 Base Rate 318.00 Add 5% 15.90 =333.90 (Volume-II) | m | 333.6 | 333.6 | 180.0 | False | None | None | False | None | False | 60048.0 | 0 | | 3877297 | 148794 | None | code09 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including cost of materials, labour, usage charges of machinery complete as per specifications. SR 2023-24 Page No 86 I No 11.31 (Volume-II) | Kgs | 120.75 | 120.75 | 106.31 | False | None | None | False | None | False | 12836.9325 | 0 | | 3877298 | 148794 | None | code10 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. SR 2023-24 Page No 60 I No 9.10 (Volume-III) | Sqm | 1161.3 | 1161.3 | 304.2 | False | None | None | False | None | False | 353267.46 | 0 | | 3877299 | 148794 | None | code11 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. SR 2023-24 Page No 65 I No 9.39 (Volume-II) | Sqm | 1521.45 | 1521.45 | 5.18 | False | None | None | False | None | False | 7881.111 | 0 | | 3877300 | 148794 | None | code12 | Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification.SR 2023-24 Page No 65 I No9.40 (Volume-II) | Sqm | 978.6 | 978.6 | 10.35 | False | None | None | False | None | False | 10128.51 | 0 | | 3877301 | 148794 | None | code13 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests SR 2023-24 Page No 131 I No 14.1.1 (Volume-II) | Each | 5128.2 | 5128.2 | 27.0 | False | None | None | False | None | False | 138461.4 | 0 | | 3877302 | 148794 | None | code14 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid SR 2023-24 Page No 131 I No 14.3.1 (Volume-II) | Each | 6275.85 | 6275.85 | 3.0 | False | None | None | False | None | False | 18827.55 | 0 | | 3877303 | 148794 | None | code15 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 SR 2023-24 Page No 119 I No 13.12 (Volume-III) | Nos | 666.75 | 666.75 | 45.0 | False | None | None | False | None | False | 30003.75 | 0 | | 3877304 | 148794 | None | code16 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore SR 2023-24 Page No 117 I No 13.4.1 Base Rate 549 Add 5% 27.45=576.45 (Volume-III) | Nos | 576.45 | 576.45 | 6.0 | False | None | None | False | None | False | 3458.7 | 0 | | 3877305 | 148794 | None | code17 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR 2023-24 Page No 45 I No 8.25 (Volume-III) | Sqm | 143.85 | 143.85 | 1231.8 | False | None | None | False | None | False | 177194.43 | 0 | | 3877306 | 148794 | None | code18 | Extra for depth beyond 45 cm of brick masonry chamber : For 455x610 mm size With common burnt clay (non modular) bricks of class designation 3.5 SR 2023-24 Page No125 I No 13.55.1 (Volume-II) | Cum | 6764.1 | 6764.1 | 6.0 | False | None | None | False | None | False | 40584.6 | 0 | | 3877307 | 148794 | None | code19 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. It No. 2.11 H P.No. 18 S.R 2023-24 (Volume-I) | Tonne | 82961.55 | 82961.55 | 6.0 | False | None | None | False | None | False | 497769.3 | 0 | | 3877308 | 148794 | None | code20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. SR 2023-24 Page No123 I No 13.34 (Volume-II) | l | 9.45 | 9.45 | 6000.0 | False | None | None | False | None | False | 56700.0 | 0 | | 3877309 | 148794 | None | code21 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20mm nominal bore SR 2023-24 Page No.119 I No 13.102 (Volume-II) | No | 255.15 | 255.15 | 30.0 | False | None | None | False | None | False | 7654.5 | 0 | | 3877310 | 148794 | None | code22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes SR 2023-24 Page No.122 I No 13.31.2 (Volume-II) | No | 254.1 | 254.1 | 150.0 | False | None | None | False | None | False | 38115.0 | 0 | | 3877311 | 148794 | None | code23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes SR 2023-24 Page No.122 I No 13.31.3 (Volume-II) | m | 333.9 | 333.9 | 90.0 | False | None | None | False | None | False | 30051.0 | 0 | | 3877312 | 148794 | None | code24 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore : SR 2023-24 Page No.117 I No 13.5.2 (Volume-II) | No | 329.75 | 329.75 | 6.0 | False | None | None | False | None | False | 1978.5 | 0 |
|