| 1724955613000 | 1 | None | None | Buildings | Construction of toilet at Belur jackwell housing board and ramanahalli WTP in cmc limi | 720022.7 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3882709 | 149113 | None | NO 1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 105.06 | 105.06 | 33.047 | False | None | None | False | None | False | 3471.91782 | 0 | | 3882710 | 149113 | None | No2 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5833.92 | 5833.92 | 3.879 | False | None | None | False | None | False | 22629.77568 | 0 | | 3882711 | 149113 | None | NO 3 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6580.67 | 6580.67 | 20.6549 | False | None | None | False | None | False | 135923.080783 | 0 | | 3882712 | 149113 | None | NO 4 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9769.03 | 9769.03 | 1.6187 | False | None | None | False | None | False | 15813.128861 | 0 | | 3882713 | 149113 | None | NO 5 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification | Tonne | 92140.71 | 92140.71 | 0.6564 | False | None | None | False | None | False | 60481.162044 | 0 | | 3882714 | 149113 | None | NO 6 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
aggregates | Cum | 10243.35 | 10243.35 | 4.2122 | False | None | None | False | None | False | 43147.03887 | 0 | | 3882715 | 149113 | None | NO 7 | Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1267.93 | 1267.93 | 76.7834 | False | None | None | False | None | False | 97355.976362 | 0 | | 3882716 | 149113 | None | NO 8 | Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 364.62 | 364.62 | 77.8442 | False | None | None | False | None | False | 28383.552204 | 0 | | 3882717 | 149113 | None | NO 9 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 262.65 | 262.65 | 95.2862 | False | None | None | False | None | False | 25026.92043 | 0 | | 3882718 | 149113 | None | NO 10 | Finishing walls with Premium Acrylic Smooth exterior paint with,Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up,resistant, Alkali & Water resistant of required shade: New work (Two,coats applied @ 1.43 L/10 m² over and including priming coat of exterior,primer applied @ 2.20 kg/10 m²) with paint of approved quality to give,an even shade, after thoroughly brooming the surface to remove all dirt,,dust, mortar drops and foreign matter including preparing the surface,even and sand paper smooth, cost of materials, labour complete as per,specifications and as per directions of Engineer-in-charge. | Sqm | 186.9 | 186.9 | 77.8442 | False | None | None | False | None | False | 14549.08098 | 0 | | 3882719 | 149113 | None | NO 11 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 141.11 | 141.11 | 50.25 | False | None | None | False | None | False | 7090.7775 | 0 | | 3882720 | 149113 | None | NO 12 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foamsheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with
19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | Cum | 327.54 | 327.54 | 24.75 | False | None | None | False | None | False | 8106.615 | 0 | | 3882721 | 149113 | None | NO 13 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. | Sqm | 2436.98 | 2436.98 | 7.875 | False | None | None | False | None | False | 19191.2175 | 0 | | 3882722 | 149113 | None | NO 14 | Providing and fixing in position fully glazed shutters for ventilators side hung or central pivoted with Honne wood stiles and rails of 30mm thick 50mm wide and central divider of 30mm. wide, 3mm thick reeded glass fixed with wooden beading of size 10mm wide flushed to the thickness of the frame including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 6718.69 | 6718.69 | 1.0125 | False | None | None | False | None | False | 6802.673625 | 0 | | 3882723 | 149113 | None | NO 15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse
sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 1108.28 | 1108.28 | 11.25 | False | None | None | False | None | False | 12468.15 | 0 | | 3882724 | 149113 | None | NO 16 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mmM thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per
specifications. | Sqm | 1433.76 | 1433.76 | 39.375 | False | None | None | False | None | False | 56454.3 | 0 | | 3882725 | 149113 | None | NO 17 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 210.12 | 210.12 | 6.749 | False | None | None | False | None | False | 1418.09988 | 0 | | 3882726 | 149113 | None | NO 18 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 450x300x150 mm | Each | 3512.3 | 3512.3 | 2.0 | False | None | None | False | None | False | 7024.6 | 0 | | 3882727 | 149113 | None | NO 19 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 5030.52 | 5030.52 | 5.0 | False | None | None | False | None | False | 25152.6 | 0 | | 3882728 | 149113 | None | NO 20 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 | Each | 444.96 | 444.96 | 7.0 | False | None | None | False | None | False | 3114.72 | 0 | | 3882729 | 149113 | None | NO 21 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. | Each | 654.05 | 654.05 | 3.0 | False | None | None | False | None | False | 1962.15 | 0 | | 3882730 | 149113 | None | NO 22 | Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing
CI cover & frame etc. excluding the cost of CI frame and cover | Each | 4934.73 | 4934.73 | 5.0 | False | None | None | False | None | False | 24673.65 | 0 | | 3882731 | 149113 | None | NO 23 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 48.41 | 48.41 | 7.0 | False | None | None | False | None | False | 338.87 | 0 | | 3882732 | 149113 | None | NO 24 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) - 15mm nominal OD pipes | m | 187.46 | 187.46 | 40.0 | False | None | None | False | None | False | 7498.4 | 0 | | 3882733 | 149113 | None | NO 25 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) - 20mm nominal OD pipes | m | 249.26 | 249.26 | 40.0 | False | None | None | False | None | False | 9970.4 | 0 | | 3882734 | 149113 | None | NO 26 | Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring
water for testing. 150 mm dia. pipes | m | 598.43 | 598.43 | 48.0 | False | None | None | False | None | False | 28724.64 | 0 | | 3882735 | 149113 | None | NO 27 | Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing
the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc.
complete for: Pipes of SN4, 110mm dia. | m | 296.64 | 296.64 | 30.0 | False | None | None | False | None | False | 8899.2 | 0 | | 3882736 | 149113 | None | NO 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflowpipes but without fittings and the base support for tank. | Ltr | 9.27 | 9.27 | 1500.0 | False | None | None | False | None | False | 13905.0 | 0 | | 3882737 | 149113 | None | NO 29 | Supplying……mm dia......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary b) 25mm dia 2mm thick | m | 78.0 | 78.0 | 45.0 | False | None | None | False | None | False | 3510.0 | 0 | | 3882738 | 149113 | None | NO 30 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting. Finishing with necessary cement plastering complete 12" x 12" x 3" (300 x 300 x 76 mm) | No | 120.0 | 120.0 | 5.0 | False | None | None | False | None | False | 600.0 | 0 | | 3882739 | 149113 | None | NO 31 | wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper withlow conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP-A2.5 sqmm | m | 113.0 | 113.0 | 180.0 | False | None | None | False | None | False | 20340.0 | 0 | | 3882740 | 149113 | None | NO 32 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Moudule | No | 344.0 | 344.0 | 5.0 | False | None | None | False | None | False | 1720.0 | 0 | | 3882741 | 149113 | None | NO 33 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Moudule | No | 284.0 | 284.0 | 5.0 | False | None | None | False | None | False | 1420.0 | 0 | | 3882742 | 149113 | None | NO 34 | Supply of round or square recess or surface mounted rolling type LED Downlight with.WGU10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector and has swivellin gun it of aluminium diecasteye ball and LED Lamp position retained by circular wire spring,with Life of 25000 burning hours and 70percent lumen maintenance with CRIgreater than 80.Power Input:220 240V@50/60Hz&Power factor greater than 0.9 along with CE approved.2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 5-6W | No | 571.0 | 571.0 | 5.0 | False | None | None | False | None | False | 2855.0 | 0 |
|