| 1725096950000 | 0 | None | None | Buildings | Construction of new Staircase from the Front to Multiperpose Hall in the Upper floor,Providing Tiles,Electrical Connections,Fortico Work,Construction Of Toilet and levelling platform inbetween the hall For The Government District Ayurveda Hospital. | 1693460.8 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3893753 | 149800 | None | 2.1.2 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates ( P.no. 15 I.no . 2.1.2 ) | Cum | 6407.12 | 6407.12 | 26.0705 | False | None | None | False | None | False | 167036.82196 | 0 | | 3893754 | 149800 | None | 9.12.3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm ( P.no.60 I.no.9.12.3 ) | Sqm | 1421.92 | 1421.92 | 285.8325 | False | None | None | False | None | False | 406430.9484 | 0 | | 3893755 | 149800 | None | 11.16.2 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(It no:11.16.2 Pg.No:-81 of Vol-2 SR 2023-24) | Kg | 166.29 | 166.29 | 400.0 | False | None | None | False | None | False | 66516.0 | 0 | | 3893756 | 149800 | None | 7.38, | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(It no:7.38, P.No 26 of Vol-2 SR 2022) | Sqm | 642.52 | 642.52 | 30.58 | False | None | None | False | None | False | 19648.2616 | 0 | | 3893757 | 149800 | None | 7.39.6 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Gutter (600 mm over all girth.(It no:7.39.6, P.No 26 of Vol-2 SR 2022) | m | 1214.91 | 1214.91 | 25.0 | False | None | None | False | None | False | 30372.75 | 0 | | 3893758 | 149800 | None | 7.32.3 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2
(both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum moisture resistant board ( P.no.25 I.no.7.32.3 ) | Sqm | 1296.36 | 1296.36 | 382.645 | False | None | None | False | None | False | 496045.6722 | 0 | | 3893759 | 149800 | None | 2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges up to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labor, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) FOR ROOF SLAB(common sr it.no.2.5.1 of 2023-24)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 8242.42 | 8242.42 | 1.909 | False | None | None | False | None | False | 15734.77978 | 0 | | 3893760 | 149800 | None | 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings( P.no. 18 I.No.2.11a) | t | 101193.76 | 101193.76 | 0.1759 | False | None | None | False | None | False | 17799.982384 | 0 | | 3893761 | 149800 | None | 11.28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Vol 2 It No 11.28 Pg no 83) | Kg | 632.8 | 632.8 | 200.0 | False | None | None | False | None | False | 126560.0 | 0 | | 3893762 | 149800 | None | 9.6.1 | Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement(It no:9.6.1, of Vol-2 SR 203-24) | Sqm | 1421.28 | 1421.28 | 35.04 | False | None | None | False | None | False | 49801.6512 | 0 | | 3893763 | 149800 | None | 6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications (CSR Vol 2 It no:6.32 Pg No 17) | Sqm | 1481.87 | 1481.87 | 6.855 | False | None | None | False | None | False | 10158.21885 | 0 | | 3893764 | 149800 | None | 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(It no:8.51, P.No 50 of Vol-2 SR 2023-24) | Sqm | 113.12 | 113.12 | 404.125 | False | None | None | False | None | False | 45714.62 | 0 | | 3893765 | 149800 | None | 8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(It no:8.2.1, P.No 41 of Vol-2 SR 2022) | Sqm | 333.7 | 333.7 | 21.48 | False | None | None | False | None | False | 7167.876 | 0 | | 3893766 | 149800 | None | 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Vol-2 sr item num:8.25 P No 45) | Sqm | 154.97 | 154.97 | 571.15 | False | None | None | False | None | False | 88511.1155 | 0 | | 3893767 | 149800 | None | 12.54 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with
19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.(Vol-2 sr item num:12.54 P No 104) | m | 359.72 | 359.72 | 13.4 | False | None | None | False | None | False | 4820.248 | 0 | | 3893768 | 149800 | None | 12.53 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm
thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges.(Vol-2 sr item num:12.53 P No 104) | Sqm | 1796.35 | 1796.35 | 5.01 | False | None | None | False | None | False | 8999.7135 | 0 | | 3893769 | 149800 | None | 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. ( P.N 124 In:14.7.1) | No | 3486.36 | 3486.36 | 2.0 | False | None | None | False | None | False | 6972.72 | 0 | | 3893770 | 149800 | None | 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid.( P.no.131 I.no.14.3.1) | No | 6761.18 | 6761.18 | 1.0 | False | None | None | False | None | False | 6761.18 | 0 | | 3893771 | 149800 | None | 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.( P.no.131 I.no.14.1.1) | No | 5524.78 | 5524.78 | 1.0 | False | None | None | False | None | False | 5524.78 | 0 | | 3893772 | 149800 | None | 9.96 | Providing and fixing 65mmx125mm GRP Doorframe fabricated using E-Giass Chopped Strand Mat (CSM) U.V- stabilized lsopthalic Gelcoat and lsopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement on 6 locations for high screw holding capacity for fixing metalling hold fast and shall be consolidated by filling with medium density foam/Plaster of Paris with fibre reinforcement Six Numbers of 260mmx25mmx5mm sizeS shaped M.S. flat hold fast shall be provided with the frame.( SR 18-19 Item.no:-9.96) | m | 622.16 | 622.16 | 6.6 | False | None | None | False | None | False | 4106.256 | 0 | | 3893773 | 149800 | None | 9.93 | Providing and fixing factory made single leaf rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized lsopthalic Gelcoat and on layer of 45 gsm E-Giass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot.(SR 2018-19 Item.no:-9.93)(SR 2018-19 Item.no:-9.93) | Sqm | 3360.0 | 3360.0 | 2.52 | False | None | None | False | None | False | 8467.2 | 0 | | 3893774 | 149800 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.a)1.5 sqmm(It.no.2.3.2& P.no.5) | Mtr | 26.0 | 26.0 | 250.0 | False | None | None | False | None | False | 6500.0 | 0 | | 3893775 | 149800 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.b)2.5 sqmm(It.no.2.3.3& P.no.5) | Mtr | 42.0 | 42.0 | 200.0 | False | None | None | False | None | False | 8400.0 | 0 | | 3893776 | 149800 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.a)6Amps one way Switch(It.no.3.6.1 & P.no.9) | Each | 102.0 | 102.0 | 40.0 | False | None | None | False | None | False | 4080.0 | 0 | | 3893777 | 149800 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.b)6Amps 3way socket (It.no.3.6.3 & P.no.9) | Each | 171.0 | 171.0 | 10.0 | False | None | None | False | None | False | 1710.0 | 0 | | 3893778 | 149800 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.c)Stepped Fan Regulator Two Module(It.no.3.6.4& P.no.9) | Each | 357.0 | 357.0 | 10.0 | False | None | None | False | None | False | 3570.0 | 0 | | 3893779 | 149800 | None | 5.18.1 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using ecessary fixingmaterials and 'C'Type curve, indicator ON/OFF,energy cross-3with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.a)6-32 A SP(It.no.5.18.1& P.no.17) | No | 415.0 | 415.0 | 5.0 | False | None | None | False | None | False | 2075.0 | 0 | | 3893780 | 149800 | None | 13.18.1 | Fixingof.ATPST/changeover switch/ Contactor along with neutral link with screws,bolts,nuts and wiring using required capacity wires and circuit labelling.b)15A to 63A TPST(It.no.13.18.1& P.no.57). | Each | 278.0 | 278.0 | 5.0 | False | None | None | False | None | False | 1390.0 | 0 | | 3893781 | 149800 | None | 11.3.2 | Supplyingof.feet-C Batten with integrated LED tube.W with high quality diffuser with Life of 25000 burning hours& 70% lumen maintenance with CRI greaterthan 80.Power Input:220-240V@50/60Hz&Powerfactor greaterthan0.9along with CE approved. 2years Warranty against any manufacturing defect working understandard electrical condition.a)LED light fitting 1x4 -20/22 W(It.no.11.3.2& P.no.43) | Each | 690.0 | 690.0 | 18.0 | False | None | None | False | None | False | 12420.0 | 0 | | 3893782 | 149800 | None | 11.11.5 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greaterthan70%. efficacy greaterthan 80 lumen per watt, life greaterthan 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greaterthan 0.95, power loss should lesserthan 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.a)12W, 6500K(It.no.11.11.5& P.no.47) | Each | 269.0 | 269.0 | 5.0 | False | None | None | False | None | False | 1345.0 | 0 | | 3893783 | 149800 | None | 6.4.2 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/-10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value lesserthan or equal to 4.2 CMM / Watt, Three Blades of blade leaf 1.05mm thick luminium Alloy sheet,Class B motorinsulation,Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty.a) 56" Sweep (1400 mm) Regular model(It.no.6.4.2& P.no.23) | Each | 3754.0 | 3754.0 | 10.0 | False | None | None | False | None | False | 37540.0 | 0 | | 3893784 | 149800 | None | 12.6 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x 400mm with a cast iron cover.The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.(It.no.12.6 & P.no.54) | No | 4256.0 | 4256.0 | 5.0 | False | None | None | False | None | False | 21280.0 | 0 |
|