| 1725086099000 | 0 | None | None | Plants and Machinery | Construction of Drinking water Filter House at Gowrasamudra village ST Colony in Challakere Taluk | 1009780.19 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3891994 | 149662 | None | Vol.I, 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3m (Volume-i) (P.No.8, I.No.1.14.1) PWD UNI SR 2023-24 | Cum | 102.0 | 102.0 | 20.24 | False | None | None | False | None | False | 2064.48 | 0 | | 3891995 | 149662 | None | Vol.I, 2.1.2 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (Volume-i) (P.No.15, I.No.2.1.2) PWD UNI SR 2023-24 | Cum | 5664.0 | 5664.0 | 6.32 | False | None | None | False | None | False | 35796.48 | 0 | | 3891996 | 149662 | None | Vol.II, 5.3 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Volume-2) (P.No.9, I.No.5.3) PWD UNI SR 2023-24 | Cum | 6205.0 | 6205.0 | 10.58 | False | None | None | False | None | False | 65648.9 | 0 | | 3891997 | 149662 | None | Vol.II, 5.2 | Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Volume-2) (P.No.9, I.No.5.2) PWD UNI SR 2023-24 | Cum | 6618.0 | 6618.0 | 4.48 | False | None | None | False | None | False | 29648.64 | 0 | | 3891998 | 149662 | None | Vol.I, 2.1.6 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (Volume-i) (P.No.15, I.No.2.1.6) PWD UNI SR 2023-24 | Cum | 6243.0 | 6243.0 | 1.47 | False | None | None | False | None | False | 9177.21 | 0 | | 3891999 | 149662 | None | Vol.I, 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (Volume-1) (P.No.7, I.No.1.9) PWD UNI SR 2023-24 | Cum | 266.0 | 266.0 | 20.24 | False | None | None | False | None | False | 5383.84 | 0 | | 3892000 | 149662 | None | Vol.II, 8.19.1 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, ncluding cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.(Volume-2) (P.No.44, I.No.8.19.1) PWD UNI SR 2023-24 | Sqm | 255.0 | 255.0 | 11.16 | False | None | None | False | None | False | 2845.8 | 0 | | 3892001 | 149662 | None | Vol.I, 2.3.1 | Providing and laying in Cement Concrete for all Basement & surface level
works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Volume-i) (P.No.16), I.No.2.3.1) PWD UNI SR 2023-24 | Cum | 10749.1 | 10749.1 | 2.27 | False | None | None | False | None | False | 24400.457 | 0 | | 3892002 | 149662 | None | Vol.I, 6.33 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of achinery etc complete as per specifications (Volume-i) (P.No.17), I.No.6.33) PWD UNI SR 2023-24 | Sqm | 1231.0 | 1231.0 | 33.9 | False | None | None | False | None | False | 41730.9 | 0 | | 3892003 | 149662 | None | Vol.I, 2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Volume-1) (P.No.16, I.No.2.5.1) PWD UNI SR 2023-24 for Lintel | Cum | 10608.0 | 10608.0 | 0.78 | False | None | None | False | None | False | 8274.24 | 0 | | 3892004 | 149662 | None | Vol.I, 2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Volume-1) (P.No.16, I.No.2.5.1) PWD UNI SR 2023-24 for Roof | Cum | 10608.0 | 10608.0 | 3.6 | False | None | None | False | None | False | 38188.8 | 0 | | 3892005 | 149662 | None | Vol.I, 2.5.1 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Volume-1) (P.No.16, I.No.2.5.1) PWD UNI SR 2023-24 for Chajja | Cum | 9613.5 | 9613.5 | 0.36 | False | None | None | False | None | False | 3460.86 | 0 | | 3892006 | 149662 | None | Vol.I, 2.11.h | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings (Volume-1) (P.No.18, I.No.2.11.h )PWD UNI SR 2023-24 | Tonne | 89457.0 | 89457.0 | 0.56 | False | None | None | False | None | False | 50095.92 | 0 | | 3892007 | 149662 | None | Vol.II, 8.3.1 | Providing 20 mm cement plaster of mix :1:4(1 cement: 4 fine sand) to rick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Volume-2) (P.No.41, I.No.8.3.1) PWD UNI SR 2023-24 | Sqm | 354.0 | 354.0 | 86.52 | False | None | None | False | None | False | 30628.08 | 0 | | 3892008 | 149662 | None | Vol.II, 9.17.2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm.Vol 2 (P.No.61.No. 9.17.2) PWD UNI SR 2023-24 | Sqm | 1175.0 | 1175.0 | 16.3 | False | None | None | False | None | False | 19152.5 | 0 | | 3892009 | 149662 | None | Vol.II, 11.6.1 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. . (Volume-2) (P.No. 78, I.No.11.6.1) PWD UNI SR 2023-24 | Sqm | 2633.0 | 2633.0 | 6.3 | False | None | None | False | None | False | 16587.9 | 0 | | 3892010 | 149662 | None | Vol.II, 11.8.1 | Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. (Volume-2) (P.No. 78, I.No.11.8.1) PWD UNI SR 2023-24 | Mtr | 987.0 | 987.0 | 3.0 | False | None | None | False | None | False | 2961.0 | 0 | | 3892011 | 149662 | None | Vol.II, 11.34.B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. (Volume-2) (P.No. 86, I.No.11.34.B) PWD UNI SR 2023-24" | Sqm | 183.0 | 183.0 | 90.72 | False | None | None | False | None | False | 16601.76 | 0 | | 3892012 | 149662 | None | Vol.II, 11.34.B | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings whereverrequired including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. (Volume-2) (P.No. 86, I.No.11.34.B) PWD UNI SR 2023-24 | Sqm | 582.0 | 582.0 | 69.3 | False | None | None | False | None | False | 40332.6 | 0 | | 3892013 | 149662 | None | Vol.II, 11.44 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Volume-2) (P.No. 91, I.No.11.44) PWD UNI SR 2023-24 | Sqm | 4345.0 | 4345.0 | 4.32 | False | None | None | False | None | False | 18770.4 | 0 | | 3892014 | 149662 | None | Vol.II, 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per pecifications and as per directions of Engineer-in-charge. ( Vol 2) No.45.No. 8.25) PWD UNI SR 2023-24 | Sqm | 137.0 | 137.0 | 86.88 | False | None | None | False | None | False | 11902.56 | 0 | | 3892015 | 149662 | None | Vol.III, 21-C (3) | Providing Vertical Delineator having wide angle cube corner micro prismatic non metallic reflective sheeting confirming to Type XI of ASTM D4956 -09 with White Color and Red Color combination and having minimum of retro reflective exposed area of 125 Sq CM on top slots and 35 cm2 on bottom slots and no edges shall be exposed for tampering. This tubu lar delineator shall have a core and shell construction, shell shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body and the inner core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm.and coreshell structure shall be of height not less than 800 mm above the ground and width not less than 80 mm. The metallic core of the delineator shall extend 300mm beyond the shell length from bottom for installing in the ground. The extended portion shall have slots to insert anchoring rods for enhancing the concrete grip. The logo of the manufacturer shall be embossed on either side of the body in the injection molding process. The engineering thermoplastic used for making the delineator body shall have minimum initial mechanical properties of be fixed by a combination of epoxy adhesive and grouting as per MoRTH specification 806 . (Volume-3) (P.No. 151, I.No.21-c(3)) PWD UNI SR 2023-24 | Nos | 2900.0 | 2900.0 | 1.0 | False | None | None | False | None | False | 2900.0 | 0 | | 3892016 | 149662 | None | Vol.V, 1.10 | Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components (UNI SR VOL.5 2023-24, P.227, SI.NO. 1.10) | Each | 416000.0 | 416000.0 | 1.0 | False | None | None | False | None | False | 416000.0 | 0 | | 3892017 | 149662 | None | Eltrcl, 1.1.2 | Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm
thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25 mm dia 2 mm thick (P.NO. 2-105, I.NO.1.1.2 ) PWD Electrical SR 2023-24 | Mtr | 81.0 | 81.0 | 40.0 | False | None | None | False | None | False | 3240.0 | 0 | | 3892018 | 149662 | None | Eltrcl, 1.6.4 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering
complete. 8""x6""x3"" (203x152x76mm) (P.NO. 3-105, I.NO.1.6.4 ) PWD Electrical SR 2023-24 | Each | 86.0 | 86.0 | 6.0 | False | None | None | False | None | False | 516.0 | 0 | | 3892019 | 149662 | None | Eltrcl, 2.1 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)
& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (P.NO. 5-105, I.NO.2.1) PWD Electrical SR 2023-24 2.1.1 Point wiring using class A Materialsa) Short point up to 3Mtr from tapping point to out let via switch | Each Point | 285.0 | 285.0 | 1.0 | False | None | None | False | None | False | 285.0 | 0 | | 3892020 | 149662 | None | Eltrcl, 2.1 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)
& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (P.NO. 5-105, I.NO.2.1) PWD Electrical SR 2023-24 2.1.2 Point wiring using class A Materials b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch
| Each Point | 394.0 | 394.0 | 2.0 | False | None | None | False | None | False | 788.0 | 0 | | 3892021 | 149662 | None | Eltrcl, 2.1 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)
& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (P.NO. 5-105, I.NO.2.1) PWD Electrical SR 2023-24 2.1.3 Point wiring using class A Materials c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch
| Each Point | 570.0 | 570.0 | 4.0 | False | None | None | False | None | False | 2280.0 | 0 | | 3892022 | 149662 | None | Eltrcl, 3.1.2 | Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. b) 6Amps 3/5 Way (P.NO. 8-105, I.NO.3.1.2) PWD Electrical SR 2023-24 | Each | 147.0 | 147.0 | 2.0 | False | None | None | False | None | False | 294.0 | 0 | | 3892023 | 149662 | None | Eltrcl, 3.3.2 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way (P.NO. 8-105, I.NO.3.3.2)PWD Electrical SR 2023-24 | Each | 124.0 | 124.0 | 2.0 | False | None | None | False | None | False | 248.0 | 0 | | 3892024 | 149662 | None | Eltrcl, 3.3.3 | Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 6 Way (P.NO. 8-105, I.NO.3.3.3) PWD Electrical SR 2023-24 | Mtr | 137.0 | 137.0 | 2.0 | False | None | None | False | None | False | 274.0 | 0 | | 3892025 | 149662 | None | Eltrcl, 2.3.2, 2.3.3 and 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P.NO. 5-105, I.No. 2.3.2, 2.3.3 &2.3.5)PWD Electrical SR 2023-24 2.3.2 1.5 sqmm (Copper wire)
| Mtr | 26.0 | 26.0 | 70.0 | False | None | None | False | None | False | 1820.0 | 0 | | 3892026 | 149662 | None | Eltrcl, 2.3.2, 2.3.3 and 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P.NO. 5-105, I.No. 2.3.2, 2.3.3 &2.3.5)PWD Electrical SR 2023-24 2.3.3 2.5 sqmm (Copper wire)
| Mtr | 42.0 | 42.0 | 30.0 | False | None | None | False | None | False | 1260.0 | 0 | | 3892027 | 149662 | None | Eltrcl, 2.3.2, 2.3.3 and 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P.NO. 5-105, I.No. 2.3.2, 2.3.3 &2.3.5)PWD Electrical SR 2023-24 2.3.5 6 sqmm (Copper wire)
| Mtr | 92.0 | 92.0 | 60.0 | False | None | None | False | None | False | 5520.0 | 0 | | 3892028 | 149662 | None | Eltrcl, 3.8 | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws. (P.NO. 9-105, I.No. 3.8) PWD Electrical SR 2023-24 | Sq CM | 0.41 | 0.41 | 1500.0 | False | None | None | False | None | False | 615.0 | 0 | | 3892029 | 149662 | None | Eltrcl, 11.3.2 | Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours and 70 lumen maintenance with CRI 80. Power Input: 220-240V at 50 60Hz and Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED light fighting 1 4 20 22 w P.NO. 43-105, I.NO.11.3.2 PWD Electrical SR 2022-23 | Each | 690.0 | 690.0 | 3.0 | False | None | None | False | None | False | 2070.0 | 0 | | 3892030 | 149662 | None | Eltrcl, 13.1.1 | SupplyingandFixingof.mmdiaclassAGIpipebracketupto2mslongbentatsuitableangleandfixingtothisbracketstreetlightfittingofallcapacitiestoGIorGIorrailorRCpole/wallusingsuitableclamps,bolts,andnutsandwiringusingsuitablecapacitywires. Using 25mm dia G.I.Pipe (P.NO. 56-105, I.NO.13.1.1) PWD Electrical SR 2022-23 | Each | 978.0 | 978.0 | 2.0 | False | None | None | False | None | False | 1956.0 | 0 | | 3892031 | 149662 | None | Eltrcl, 5.6.6 | Supplyandfixingpolishedwoodboardmadeofnotlessthan15mmthickplankonbothsidesofnotmorethan2piecesandfixingthesametothewallusingtapredinvertedwoodenplugsscrews. (P.NO. 14-105, I.NO.5.6.6) PWD Electrical SR 2022-23 | Each | 326.13 | 326.13 | 2.0 | False | None | None | False | None | False | 652.26 | 0 | | 3892032 | 149662 | None | Eltrcl, 6.7.2 | Supplying and fixing of Porcelain fuse channel with cut out on existing wooden panel using necessary nuts, bolts and washers 32 A (P.NO. 14-105, I.NO.6.7.2) PWD Electrical SR 2022-23 | Each | 241.0 | 241.0 | 2.0 | False | None | None | False | None | False | 482.0 | 0 | | 3892033 | 149662 | None | Eltrcl, 5.7.2 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (P.NO. 17-105, I.NO.5.7.2 ) PWD Electrical SR 2022-23 | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 | | 3892034 | 149662 | None | Eltrcl, 5.7.2 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (P.NO. 17-105, I.NO.5.7.2 ) PWD Electrical SR 2022-23 5.18.3 50-63 A SP | Each | 811.0 | 811.0 | 4.0 | False | None | None | False | None | False | 3244.0 | 0 | | 3892035 | 149662 | None | Eltrcl, 6.28 | Supplying, fixing and wiring electronic 5 to 20Amps SIngle phase Class-1 Accuracy Energy Meter. Group A (P.No.48, I.No.6.28) | Each | 1188.0 | 1188.0 | 1.0 | False | None | None | False | None | False | 1188.0 | 0 | | 3892036 | 149662 | None | Eltrcl, 12.56 | Supplying fixing wiring earth electrode for grounding conduits, I.C. cutout sand other equipment' sonthe meter board using 40 mmdia 2.90mm thick GIpipe2. 5mlong burie dinapit. The pit should be filled withe qual proportion of saltand charcoal 150mmall-round the pipe to complete depth . The connection from the pipe to the conduitetc., istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia (P.No.54, I.No.12.56) PWD Electrical SR 2022-23 | Rmtr | 3510.0 | 3510.0 | 1.0 | False | None | None | False | None | False | 3510.0 | 0 | | 3892037 | 149662 | None | Eltrcl, 32.05 | Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class. Class A’ PVC Cable 4 core 16 sqmm (P.No.55, I.No.32.05) | Mtr | 141.84 | 141.84 | 35.0 | False | None | None | False | None | False | 4964.4 | 0 | | 3892038 | 149662 | None | Vol.I, 1.17.1 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m Volume-1 (P.No.10, I.No:1.17.1) P.W.D Commun Uni SR 2023-24 | Cum | 262.0 | 262.0 | 138.6 | False | None | None | False | None | False | 36313.2 | 0 | | 3892039 | 149662 | None | Vol.V, 10.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 75mm dia., 6 kg/sqcm & class 3 Volume-V (P.No.113, I.No:10.5) water supply SR 2023-24 PVC pipes 63mm dia., 6 kg/sqcm & class 3 PVC pipes 75mm dia., 6 kg/sqcm & class 3
| Mtr | 220.0 | 220.0 | 154.0 | False | None | None | False | None | False | 33880.0 | 0 | | 3892040 | 149662 | None | Vol.I, 1.10 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Volume-1 (P.No.7, I.No:1.10) PWD Comon SR 2023-24 | Cum | 160.0 | 160.0 | 69.3 | False | None | None | False | None | False | 11088.0 | 0 |
|