| 1725271896000 | 0 | None | None | Buildings | Installation of New Bore Well , Construction of Separate Toilet for Laboratory, Parking Shed for Health Center Staff, Repair of Medicine Store, Construction of Rack, Generator Room and Repair of Wiring In Community Health Center Shanivarasanthe | 564712.55 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3902712 | 150413 | None | code01 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Cum | 271.04 | 271.04 | 2.07 | False | None | None | False | None | False | 561.0528 | 0 | | 3902713 | 150413 | None | code02 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Cum | 6343.68 | 6343.68 | 3.0 | False | None | None | False | None | False | 19031.04 | 0 | | 3902714 | 150413 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Cum | 7155.68 | 7155.68 | 3.21 | False | None | None | False | None | False | 22969.7328 | 0 | | 3902715 | 150413 | None | code04 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Cum | 6963.04 | 6963.04 | 1.99 | False | None | None | False | None | False | 13856.4496 | 0 | | 3902716 | 150413 | None | code05 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 1467.2 | 1467.2 | 14.56 | False | None | None | False | None | False | 21362.432 | 0 | | 3902717 | 150413 | None | code06 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 285.6 | 285.6 | 1.61 | False | None | None | False | None | False | 459.816 | 0 | | 3902718 | 150413 | None | code07 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 312.48 | 312.48 | 53.61 | False | None | None | False | None | False | 16752.0528 | 0 | | 3902719 | 150413 | None | code08 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 142.24 | 142.24 | 53.61 | False | None | None | False | None | False | 7625.4864 | 0 | | 3902720 | 150413 | None | code09 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 2548.0 | 2548.0 | 6.0 | False | None | None | False | None | False | 15288.0 | 0 | | 3902721 | 150413 | None | code10 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 155.68 | 155.68 | 13.2 | False | None | None | False | None | False | 2054.976 | 0 | | 3902722 | 150413 | None | code11 | Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished with floating coat of neat cement mixed with red oxide ( mix of same proportion ) , including cost of materials, labour, curing, complete as per specifications. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 880.32 | 880.32 | 16.2 | False | None | None | False | None | False | 14261.184 | 0 | | 3902723 | 150413 | None | code12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 636.16 | 636.16 | 16.2 | False | None | None | False | None | False | 10305.792 | 0 | | 3902724 | 150413 | None | code13 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Kg | 136.64 | 136.64 | 175.0 | False | None | None | False | None | False | 23912.0 | 0 | | 3902725 | 150413 | None | code14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 271.04 | 271.04 | 15.0 | False | None | None | False | None | False | 4065.6 | 0 | | 3902726 | 150413 | None | code15 | Demolishing brick work manually/ by mechanical means including stacking
of serviceable material and disposal of unserviceable material to the
appropriate disposal area as per direction of Engineer-in-charge.In cement mortar with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Cum | 1152.48 | 1152.48 | 0.4 | False | None | None | False | None | False | 460.992 | 0 | | 3902727 | 150413 | None | code16 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick one side teak and one side commercial with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 3912.16 | 3912.16 | 2.7 | False | None | None | False | None | False | 10562.832 | 0 | | 3902728 | 150413 | None | code17 | Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Cum | 1152.48 | 1152.48 | 0.18 | False | None | None | False | None | False | 207.4464 | 0 | | 3902729 | 150413 | None | code18 | Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 1485.12 | 1485.12 | 9.44 | False | None | None | False | None | False | 14019.5328 | 0 | | 3902730 | 150413 | None | code19 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Of area 3 m² and below with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 105.28 | 105.28 | 1.35 | False | None | None | False | None | False | 142.128 | 0 | | 3902731 | 150413 | None | code20 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 6694.24 | 6694.24 | 2.0 | False | None | None | False | None | False | 13388.48 | 0 | | 3902732 | 150413 | None | code21 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 4615.52 | 4615.52 | 1.0 | False | None | None | False | None | False | 4615.52 | 0 | | 3902733 | 150413 | None | code22 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For: PVC pipes 110mm dia., 6 kg/sqcm & class 3 with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 460.32 | 460.32 | 6.0 | False | None | None | False | None | False | 2761.92 | 0 | | 3902734 | 150413 | None | code23 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not less than 93 g with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Nos | 271.04 | 271.04 | 2.0 | False | None | None | False | None | False | 542.08 | 0 | | 3902735 | 150413 | None | code24 | Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 5365.92 | 5365.92 | 2.0 | False | None | None | False | None | False | 10731.84 | 0 | | 3902736 | 150413 | None | code25 | Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 2197.44 | 2197.44 | 2.0 | False | None | None | False | None | False | 4394.88 | 0 | | 3902737 | 150413 | None | code26 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 1378.72 | 1378.72 | 5.49 | False | None | None | False | None | False | 7569.1728 | 0 | | 3902738 | 150413 | None | code27 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Sqm | 1848.0 | 1848.0 | 13.5 | False | None | None | False | None | False | 24948.0 | 0 | | 3902739 | 150413 | None | code28 | PUMPING MACHINERY Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For 5.00 HP - 155 LPM @ 70 m = 10 STG Outlet Dia - 2.00" with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 30912.0 | 30912.0 | 1.0 | False | None | None | False | None | False | 30912.0 | 0 | | 3902740 | 150413 | None | code29 | Supply and delivery at site Brand new best make PVC insulated cable of
Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990
with ISI Mark and as per its latest amendments. 1x3x4 Sqm with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 151.2 | 151.2 | 100.0 | False | None | None | False | None | False | 15120.0 | 0 | | 3902741 | 150413 | None | code30 | Supply and delivery at site of brand new best make gate valve as per IS
778/1984 with ISI Mark and as per its latest amendments Size 50 mm with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 1400.0 | 1400.0 | 1.0 | False | None | None | False | None | False | 1400.0 | 0 | | 3902742 | 150413 | None | code31 | Supply and delivery at site of brand new best make non-return valve as
per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 1400.0 | 1400.0 | 1.0 | False | None | None | False | None | False | 1400.0 | 0 | | 3902743 | 150413 | None | code32 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor,under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter
2) S-D- Star Delta Starter etc. complete. 3 to 6 HP pumps with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 10696.0 | 10696.0 | 1.0 | False | None | None | False | None | False | 10696.0 | 0 | | 3902744 | 150413 | None | code33 | Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with the protective cover with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 3416.0 | 3416.0 | 12.0 | False | None | None | False | None | False | 40992.0 | 0 | | 3902745 | 150413 | None | code34 | Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Job | 7280.0 | 7280.0 | 1.0 | False | None | None | False | None | False | 7280.0 | 0 | | 3902746 | 150413 | None | code35 | Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Job | 1512.0 | 1512.0 | 1.0 | False | None | None | False | None | False | 1512.0 | 0 | | 3902747 | 150413 | None | code36 | Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1, for successful completion of work as per specifications and as per the directions of the Engineer in charge of the work. | Rmtr | 179.2 | 179.2 | 30.0 | False | None | None | False | None | False | 5376.0 | 0 | | 3902748 | 150413 | None | code37 | Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Job | 4200.0 | 4200.0 | 3.0 | False | None | None | False | None | False | 12600.0 | 0 | | 3902749 | 150413 | None | code38 | ELECTRIFICATION TO SUBMERCIBLE PUMP SET Supplying of TPST with rewirable porcelain channels in S M enclosure. Made out of 14SWG powder coated paint of approved colour. 32A with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 1905.12 | 1905.12 | 1.0 | False | None | None | False | None | False | 1905.12 | 0 | | 3902750 | 150413 | None | code39 | Fixingof.....ATPST/change over switch/Contactor along with neutra llink with screws,bolts,nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPST with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 311.36 | 311.36 | 2.0 | False | None | None | False | None | False | 622.72 | 0 | | 3902751 | 150413 | None | code40 | Supply and fixing polished woodboard made of not less than 15mm thick plank on bothsides of not more than 2pieces and fixing the same to the wall using tapered inverted wooden plugs screws.12" x 9" x 1.5" with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 116.48 | 116.48 | 1.0 | False | None | None | False | None | False | 116.48 | 0 | | 3902752 | 150413 | None | code41 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32 A with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 269.92 | 269.92 | 3.0 | False | None | None | False | None | False | 809.76 | 0 | | 3902753 | 150413 | None | code42 | Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase&Neutral ) & 1x1.0sqmm (Earthwire) FRLS multistrand PVC insulated copper wire(confirming to IS-694:and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gangbox, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Point | 319.2 | 319.2 | 2.0 | False | None | None | False | None | False | 638.4 | 0 | | 3902754 | 150413 | None | code43 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and'C'Type curve, indicator ON/OFF,energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898 6-32 A with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 464.8 | 464.8 | 3.0 | False | None | None | False | None | False | 1394.4 | 0 | | 3902755 | 150413 | None | code44 | Supplying and fixing regular MCB distribution boards on wall/ood board/flush mounting using required clamps, bolts, nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3phase/single door with powder coated painting Made out of 14SWG MS enclosure. I - Single Door4 Way SP & N with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 1389.92 | 1389.92 | 0.6 | False | None | None | False | None | False | 833.952 | 0 | | 3902756 | 150413 | None | code45 | Supplying, fixing and wiring Electronic Trivector Meter(ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 1545.6 | 1545.6 | 1.0 | False | None | None | False | None | False | 1545.6 | 0 | | 3902757 | 150413 | None | code46 | Supplying, fixing and wiring Residual current circuit breake r(RCCB)240/450V upto 300m A sensitivity on existing wood/ panel board. 32-40A 4 pole with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 5764.64 | 5764.64 | 1.0 | False | None | None | False | None | False | 5764.64 | 0 | | 3902758 | 150413 | None | code47 | Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mm2 with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 70.56 | 70.56 | 25.0 | False | None | None | False | None | False | 1764.0 | 0 | | 3902759 | 150413 | None | code48 | Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive pasteetc, and fixing using inverted wood plugs in case of RCC ceiling and RCCwall/stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavygauge saddles at an interval of 700mm using NF screws with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 90.72 | 90.72 | 20.0 | False | None | None | False | None | False | 1814.4 | 0 | | 3902760 | 150413 | None | code49 | Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mm2 with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 70.56 | 70.56 | 25.0 | False | None | None | False | None | False | 1764.0 | 0 | | 3902761 | 150413 | None | code50 | Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Cum | 293.44 | 293.44 | 25.31 | False | None | None | False | None | False | 7426.9664 | 0 | | 3902762 | 150413 | None | code51 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 63mm dia., 6 kg/sqcm & class 3 with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 180.32 | 180.32 | 75.0 | False | None | None | False | None | False | 13524.0 | 0 | | 3902763 | 150413 | None | code52 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Cum | 179.2 | 179.2 | 20.25 | False | None | None | False | None | False | 3628.8 | 0 | | 3902764 | 150413 | None | code53 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth)A) 0.00-50.00 m with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 414.4 | 414.4 | 50.0 | False | None | None | False | None | False | 20720.0 | 0 | | 3902765 | 150413 | None | code54 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) B) 50.00-100.00 m with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 519.68 | 519.68 | 50.0 | False | None | None | False | None | False | 25984.0 | 0 | | 3902766 | 150413 | None | code55 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth) C) 100.00-150.00 m with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 552.16 | 552.16 | 27.5 | False | None | None | False | None | False | 15184.4 | 0 | | 3902767 | 150413 | None | code56 | Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Rmtr | 2164.96 | 2164.96 | 30.0 | False | None | None | False | None | False | 64948.8 | 0 | | 3902768 | 150413 | None | code57 | Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge with all lead and lifts, loading and unloading charges and all other incidental charges etc., for successful completion of work as per specifications and as per the directions of the Engineer incharge of the work. | Each | 183.68 | 183.68 | 1.0 | False | None | None | False | None | False | 183.68 | 0 |
|