createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1725256240592 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 590.00 emd 50000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 11-09-2024 17:01:00 tenderQueryClose 09-09-2024 17:00:00 technicalBidOpen None publishedDate 02-09-2024 13:42:56 publishedByPost RDPR_EE_DIV_VJN publishedByUser KPE18071 - SABANNA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson EE office splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08392242173 mobileNumber 8392242173 tenderSupplierList None
tenderSchedule	createdTs 1725256240638 version 4 createdDate None modifiedDate None tenderNumber RDPR/2024-25/BD/WORK_INDENT8058 title Construction of Single Classroom in Maadhur, Nelkudri2 Village in H B Halli Tq Vijayanagara Dist.(Rs. 27.80 lakhs)(Viveka 2022-23) description Construction of Single Classroom in Maadhur, Nelkudri2 Village in H B Halli Tq Vijayanagara Dist.(Rs. 27.80 lakhs)(Viveka 2022-23) category WORKS categoryText Works ecv 2338169.32 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 943 locationName RDPR Division Office Vijayanagara provisionalAmount 2780000.0 groupOverheadTotal 0.0 fileNumber PRED/SDN/HBH/BD/202-23
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1725256241000 0 None None Buildings Construction of Single Classroom in Maadhur Village in H B Halli Tq Vijayanagara Dist. 1169084.66 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3900128 150222 None code01 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 2021-22, V1, Page no 5, Item No 1.4.1 Cum 195.3 195.3 45.01 False None None False None False 8790.453 0 3900129 150222 None code02 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.2021-22, V2, Page no 5, Item No 4.1 Sqm 99.75 99.75 33.76 False None None False None False 3367.56 0 3900130 150222 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates.2021-22, V1, Page no 15, Item No 2.1.3 Cum 5831.7 5831.7 14.98 False None None False None False 87358.866 0 3900131 150222 None code04 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.2021-22, V1, Page no 15, Item No 2.2.1 Cum 6277.95 6277.95 5.74 False None None False None False 36035.433 0 3900132 150222 None code05 Form work, centering and scaffolding for Foundation, 3% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 188.34 188.34 5.74 False None None False None False 1081.0716 0 3900133 150222 None code06 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.2021-22, V1, Page no 7, Item No 1.9 Cum 214.2 214.2 40.45 False None None False None False 8664.39 0 3900134 150222 None code07 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).2021-22, V2, Page no 9, Item No 5.4. Cum 5619.6 5619.6 19.18 False None None False None False 107783.928 0 3900135 150222 None code08 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.2021-22, V2, Page no 13, Item No 6.8 Cum 7024.5 7024.5 16.48 False None None False None False 115763.76 0 3900136 150222 None code09 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates.2021-22, V2, Page no 13, Item No 2.1.3 Cum 6014.4 6014.4 1.13 False None None False None False 6796.272 0 3900137 150222 None code10 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.2021-22, V1, Page no 17, Item No 2.5.2 Cum 6495.3 6495.3 20.5 False None None False None False 133153.65 0 3900138 150222 None code11 Form work, centering and scaffolding for Coloumns and Piers, 70% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 4546.71 4546.71 4.19 False None None False None False 19050.7149 0 3900139 150222 None code12 Form work, centering and scaffolding for Chajja, Canophy and Other Architectural Projections of Minor Sections, 45% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 2922.89 2922.89 0.14 False None None False None False 409.2046 0 3900140 150222 None code13 Form work, centering and scaffolding for Roof Beams and Lintels of Building, 60% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 3897.18 3897.18 4.83 False None None False None False 18823.3794 0 3900141 150222 None code14 Form work, centering and scaffolding for Plinth Beam and Roof Slab of Building, 50% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 3247.65 3247.65 11.35 False None None False None False 36860.8275 0 3900142 150222 None code15 Providing Thermo-Mechanically Treated bars of grade Fe-550 or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members wherever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately).2021-22, V2, Page no 84, Item No 11.32 Kg 96.6 96.6 2472.15 False None None False None False 238809.69 0 3900143 150222 None code16 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer in charge.2021-22, V2, Page no 133, Item No 15.1 Sqm 782.25 782.25 55.43 False None None False None False 43360.1175 0 3900144 150222 None code17 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 41, Item No 8.2.1 Sqm 260.4 260.4 69.86 False None None False None False 18191.544 0 3900145 150222 None code18 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 42, Item No 8.9 Sqm 338.1 338.1 160.63 False None None False None False 54309.003 0 3900146 150222 None code19 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.2021-22, V2, Page no 50, Item No 8.51 Sqm 87.15 87.15 51.66 False None None False None False 4502.169 0 3900147 150222 None code20 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.2021-22, V2, Page no 75, Item No 11.5.1 Sqm 3843.0 3843.0 2.21 False None None False None False 8493.03 0 3900148 150222 None code21 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.2021-22, V2, Page no 77, Item No 11.11.1 Kg 126.0 126.0 172.8 False None None False None False 21772.8 0 3900149 150222 None code22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.2021-22, V2, Page no 85, Item No 11.34A Sqm 152.25 152.25 136.08 False None None False None False 20718.18 0 3900150 150222 None code23 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing,polishing complete as per specifications.2021-22, V2, Page no 64, Item No 9.34 Sqm 1251.56 1251.56 53.24 False None None False None False 66633.0544 0 3900151 150222 None code24 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge.V2, Page no 62, Item No 9.19 Sqm 1294.65 1294.65 3.83 False None None False None False 4958.5095 0 3900152 150222 None code25 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete.2021-22, V2, Page no 59, Item No 9.1 Sqm 420.0 420.0 31.59 False None None False None False 13267.8 0 3900153 150222 None code26 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 45, Item No 8.25 Sqm 110.25 110.25 125.86 False None None False None False 13876.065 0 3900154 150222 None code27 Finishing walls with water proofing cement paint of required shade New work (Two coats applied @ 4.84 kg/10 m) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 45, Item No 8.28 Sqm 69.3 69.3 164.97 False None None False None False 11432.421 0 3900155 150222 None code28 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 48, Item No 8.40 Sqm 94.5 94.5 17.52 False None None False None False 1655.64 0 3900156 150222 None code29 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.2021-22, V2, Page no 82, Item No 11.25.2 Sqm 126.0 126.0 134.95 False None None False None False 17003.7 0 3900157 150222 None code30 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 110mm dia.2021-22, V5, Item No 2.2 Rmtr 284.55 284.55 12.0 False None None False None False 3414.6 0 3900158 150222 None code31 Cement Board, 2021-22, V2, Item No 106, Pno-A-15 Sqm 246.75 246.75 2.88 False None None False None False 710.64 0 3900159 150222 None code32 Chicken Mesh, 2021-22, V2, Item No 114, Pno-A-15 Sqm 12.6 12.6 62.08 False None None False None False 782.208 0 3900160 150222 None code33 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, in Charge & MoRTH specification 804 transportation, and labour etc complete.2021-22, V3, Page no 151, Item No 21-C(4) Nos 9450.0 9450.0 1.0 False None None False None False 9450.0 0 3900161 150222 None code34 Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm da........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. PWD EL SR 2022-23/ Page No 2, Item No 1.2.2 Rmtr 70.0 70.0 100.0 False None None False None False 7000.0 0 3900162 150222 None code35 Supplying heavy gauge PVC Conduit Pipe .... dia....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.PWD EL SR 2022-23/ Page No 2, Item No 1.3.2 Rmtr 80.0 80.0 100.0 False None None False None False 8000.0 0 3900163 150222 None code36 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.- 180x90x65mm.PWD EL SR 2022-23/ Page No 2, Item No 1.4.4 Each 155.0 155.0 1.0 False None None False None False 155.0 0 3900164 150222 None code37 Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. (300x300x76mm).PWD EL SR 2022-23/ Page No 3, Item No 1.6.1 Each 112.0 112.0 1.0 False None None False None False 112.0 0 3900165 150222 None code38 Supplying of …feet -PVC Batten with integrated LED tube Specification asper SanctionedEstimate LED light fitting 1 x 4' 20/22 W Item No PWD EL SR 2022-23/ Page No 74, Item No 11.32. Each 740.0 740.0 5.0 False None None False None False 3700.0 0 3900166 150222 None code39 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system - 48" Sweep (1200mm) Regular model.PWD EL SR 2022-23/ Page No 46, Item No 7.3.1 Each 2085.0 2085.0 4.0 False None None False None False 8340.0 0 3900167 150222 None code40 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch.PWD EL SR 2022-23/ Page No 05, Item No 2.1.1. Point 276.0 276.0 2.0 False None None False None False 552.0 0 3900168 150222 None Code40 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire(confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch.PWD EL SR 2022-23/ Page No 05, Item No 2.1.2 Point 386.0 386.0 2.0 False None None False None False 772.0 0 3900169 150222 None code41 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi trand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch.PWD EL SR 2022-23/ Page No 05, Item No 2.1.3 Point 567.0 567.0 2.0 False None None False None False 1134.0 0 3900170 150222 None code41 Supplying 6A flush type socket and 6 A flush type SP switch cither surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way.PWD EL SR 2022-23/ Page No 09, Item No 3.1.2 Each 143.0 143.0 6.0 False None None False None False 858.0 0 3900171 150222 None code41 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.PWD EL SR 2022-23/ Page No 10, Item No 3.9 Sq CM 0.26 0.26 300.0 False None None False None False 78.0 0 3900172 150222 None code41 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.PWD EL SR 2022-23/ Page No 27, Item No 5.17.4 Each 1103.0 1103.0 1.0 False None None False None False 1103.0 0 1725256241000 0 None None Buildings Construction of Single Classroom in Nelkudri2 Village in H B Halli Tq Vijayanagara Dist. 1169084.66 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3900173 150223 None code01 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 2021-22, V1, Page no 5, Item No 1.4.1 Cum 195.3 195.3 45.01 False None None False None False 8790.453 0 3900174 150223 None code02 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.2021-22, V2, Page no 5, Item No 4.1 Sqm 99.75 99.75 33.76 False None None False None False 3367.56 0 3900175 150223 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates.2021-22, V1, Page no 15, Item No 2.1.3 Cum 5831.7 5831.7 14.98 False None None False None False 87358.866 0 3900176 150223 None code04 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.2021-22, V1, Page no 15, Item No 2.2.1 Cum 6277.95 6277.95 5.74 False None None False None False 36035.433 0 3900177 150223 None code05 Form work, centering and scaffolding for Foundation, 3% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 188.34 188.34 5.74 False None None False None False 1081.0716 0 3900178 150223 None code06 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.2021-22, V1, Page no 7, Item No 1.9 Cum 214.2 214.2 40.45 False None None False None False 8664.39 0 3900179 150223 None code07 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).2021-22, V2, Page no 9, Item No 5.4. Cum 5619.6 5619.6 19.18 False None None False None False 107783.928 0 3900180 150223 None code08 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.2021-22, V2, Page no 13, Item No 6.8 Cum 7024.5 7024.5 16.48 False None None False None False 115763.76 0 3900181 150223 None code09 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates.2021-22, V2, Page no 13, Item No 2.1.3 Cum 6014.4 6014.4 1.13 False None None False None False 6796.272 0 3900182 150223 None code10 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.2021-22, V1, Page no 17, Item No 2.5.2 Cum 6495.3 6495.3 20.5 False None None False None False 133153.65 0 3900183 150223 None code11 Form work, centering and scaffolding for Coloumns and Piers, 70% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 4546.71 4546.71 4.19 False None None False None False 19050.7149 0 3900184 150223 None code12 Form work, centering and scaffolding for Chajja, Canophy and Other Architectural Projections of Minor Sections, 45% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 2922.89 2922.89 0.14 False None None False None False 409.2046 0 3900185 150223 None code13 Form work, centering and scaffolding for Roof Beams and Lintels of Building, 60% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 3897.18 3897.18 4.83 False None None False None False 18823.3794 0 3900186 150223 None code14 Form work, centering and scaffolding for Plinth Beam and Roof Slab of Building, 50% of Basic rate of concrete For Footing. 2021-22, V1, Page no 115 Cum 3247.65 3247.65 11.35 False None None False None False 36860.8275 0 3900187 150223 None code15 Providing Thermo-Mechanically Treated bars of grade Fe-550 or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members wherever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately).2021-22, V2, Page no 84, Item No 11.32 Kg 96.6 96.6 2472.15 False None None False None False 238809.69 0 3900188 150223 None code16 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer in charge.2021-22, V2, Page no 133, Item No 15.1 Sqm 782.25 782.25 55.43 False None None False None False 43360.1175 0 3900189 150223 None code17 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 41, Item No 8.2.1 Sqm 260.4 260.4 69.86 False None None False None False 18191.544 0 3900190 150223 None code18 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 42, Item No 8.9 Sqm 338.1 338.1 160.63 False None None False None False 54309.003 0 3900191 150223 None code19 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.2021-22, V2, Page no 50, Item No 8.51 Sqm 87.15 87.15 51.66 False None None False None False 4502.169 0 3900192 150223 None code20 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.2021-22, V2, Page no 75, Item No 11.5.1 Sqm 3843.0 3843.0 2.21 False None None False None False 8493.03 0 3900193 150223 None code21 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.2021-22, V2, Page no 77, Item No 11.11.1 Kg 126.0 126.0 172.8 False None None False None False 21772.8 0 3900194 150223 None code22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.2021-22, V2, Page no 85, Item No 11.34A Sqm 152.25 152.25 136.08 False None None False None False 20718.18 0 3900195 150223 None code23 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing,polishing complete as per specifications.2021-22, V2, Page no 64, Item No 9.34 Sqm 1251.56 1251.56 53.24 False None None False None False 66633.0544 0 3900196 150223 None code24 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge.V2, Page no 62, Item No 9.19 Sqm 1294.65 1294.65 3.83 False None None False None False 4958.5095 0 3900197 150223 None code25 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete.2021-22, V2, Page no 59, Item No 9.1 Sqm 420.0 420.0 31.59 False None None False None False 13267.8 0 3900198 150223 None code26 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 45, Item No 8.25 Sqm 110.25 110.25 125.86 False None None False None False 13876.065 0 3900199 150223 None code27 Finishing walls with water proofing cement paint of required shade New work (Two coats applied @ 4.84 kg/10 m) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 45, Item No 8.28 Sqm 69.3 69.3 164.97 False None None False None False 11432.421 0 3900200 150223 None code28 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.2021-22, V2, Page no 48, Item No 8.40 Sqm 94.5 94.5 17.52 False None None False None False 1655.64 0 3900201 150223 None code29 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.2021-22, V2, Page no 82, Item No 11.25.2 Sqm 126.0 126.0 134.95 False None None False None False 17003.7 0 3900202 150223 None code30 Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 110mm dia.2021-22, V5, Item No 2.2 Rmtr 284.55 284.55 12.0 False None None False None False 3414.6 0 3900203 150223 None code31 Cement Board, 2021-22, V2, Item No 106, Pno-A-15 Sqm 246.75 246.75 2.88 False None None False None False 710.64 0 3900204 150223 None code32 Chicken Mesh, 2021-22, V2, Item No 114, Pno-A-15 Sqm 12.6 12.6 62.08 False None None False None False 782.208 0 3900205 150223 None code33 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, in Charge & MoRTH specification 804 transportation, and labour etc complete.2021-22, V3, Page no 151, Item No 21-C(4) Nos 9450.0 9450.0 1.0 False None None False None False 9450.0 0 3900206 150223 None code34 Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm da........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. PWD EL SR 2022-23/ Page No 2, Item No 1.2.2 Rmtr 70.0 70.0 100.0 False None None False None False 7000.0 0 3900207 150223 None code35 Supplying heavy gauge PVC Conduit Pipe .... dia....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.PWD EL SR 2022-23/ Page No 2, Item No 1.3.2 Rmtr 80.0 80.0 100.0 False None None False None False 8000.0 0 3900208 150223 None code36 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.- 180x90x65mm.PWD EL SR 2022-23/ Page No 2, Item No 1.4.4 Each 155.0 155.0 1.0 False None None False None False 155.0 0 3900209 150223 None code37 Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. (300x300x76mm).PWD EL SR 2022-23/ Page No 3, Item No 1.6.1 Each 112.0 112.0 1.0 False None None False None False 112.0 0 3900210 150223 None code38 Supplying of ...feet -PVC Batten with integrated LED tube ....As Per Sanctioned Estimate LED light fitting 1 x 4' 20/22 W. PWD EL SR 2022-23/ Page No 74, Item No 11.32 Each 740.0 740.0 5.0 False None None False None False 3700.0 0 3900211 150223 None code39 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system - 48" Sweep (1200mm) Regular model.PWD EL SR 2022-23/ Page No 46, Item No 7.3.1 Each 2085.0 2085.0 4.0 False None None False None False 8340.0 0 3900212 150223 None code40 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch.PWD EL SR 2022-23/ Page No 05, Item No 2.1.1 Point 276.0 276.0 2.0 False None None False None False 552.0 0 3900213 150223 None code41 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire(confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch.PWD EL SR 2022-23/ Page No 05, Item No 2.1.2 Point 386.0 386.0 2.0 False None None False None False 772.0 0 3900214 150223 None code42 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi trand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch.PWD EL SR 2022-23/ Page No 05, Item No 2.1.3 Point 567.0 567.0 2.0 False None None False None False 1134.0 0 3900215 150223 None code43 Supplying 6A flush type socket and 6 A flush type SP switch cither surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way.PWD EL SR 2022-23/ Page No 09, Item No 3.1.2 Each 143.0 143.0 6.0 False None None False None False 858.0 0 3900216 150223 None code44 Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.PWD EL SR 2022-23/ Page No 10, Item No 3.9 Sq CM 0.26 0.26 300.0 False None None False None False 78.0 0 3900217 150223 None code45 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.PWD EL SR 2022-23/ Page No 27, Item No 5.17.4 Each 1103.0 1103.0 1.0 False None None False None False 1103.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1725256242000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1725256242000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1725256242000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1725256242000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1725256242000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1725256242000 1 None None ELIGIBILITY Total value of civil engineering works executed and payments received in the last five years (2019-20, 2020-21,2021-22,2022-23 and 2023-24) should not be less than Estimated cost of the work. Turnover certificate must be submitted with UDIN No on it, Failing will be considered as invalid. None 1725256242000 1 None None ELIGIBILITY Bidder can access tender documents from the website, fill them and submit the completed tender document into electronic tender on the website. https://eproc.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. EMD will be refunded only after acceptance of successful bidder. None 1725256242000 1 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders. None 1725256242000 1 None None ELIGIBILITY Self attested copies of the document of all details uploaded to the e-portal in original should be submitted to the executive engineer on the date & time specified above i.e., at the time of bid opening as per notification. None 1725256242000 1 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason. None 1725256242000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1725256242000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1725256242000 1 None None ELIGIBILITY The tenderer should maintain the road during the defective liability period - 1YEAR ( maintenance period starts from the date of completion of the work.) None 1725256242000 1 None None ELIGIBILITY All original documents should be submitted in PDF format only. None 1725256242000 0 None None ELIGIBILITY Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None 1725256242000 1 None None ELIGIBILITY The Department is not responsible for any delay in accessing e-procurement portal. None 1725256242000 1 None None ELIGIBILITY The Security Deposit will be released only after satisfactorily completion of defect liability period None 1725257242000 0 None None ELIGIBILITY All other conditions and requirements has to be fulfilled as per the standard bid document kw-2. None 1725257254000 0 None None ELIGIBILITY The tenderer should quote his rates With all leads and lifts loading and un loading, including cost of Labour, hire charges of Machinery and other incidental charges etc complete as per the directions of the engineer in charge of the work specifications. None 1725257260000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1725257414000 0 None None ELIGIBILITY Time given for completion of the work is 6 months(Including monsoon period) None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Registration Certificate PWD True Technical Bid Annual Turnover Certificate with compulsory UDIN number True Technical Bid Single similar nature of work done certificate issued by competent authority, not below the rank of Executive Engineer. True Technical Bid Principal place of business details True Technical Bid Other Kw-2 documents True Technical Bid profit and loss statements True Technical Bid Ongoing commitment details. True Technical Bid list of works on hand True Technical Bid Recent tax clearance certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None