| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1725078531000 | 0 | None | None | Other Works | Sanitary landfill site | 2822878.62 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3891222 | 149590 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 m | Cum | 75.19 | 75.19 | 4131.0 | False | None | None | False | None | False | 310609.89 | 0 | | 3891223 | 149590 | None | code02 | Supply & install Geo-synthetic Clay Liner laying, anchoring in trench, seaming, testing complete as given in General Specification complete to form an impervious barrier. Minimum width of the Liner shall be 4.9M. GCL must be anchored within anchor trench including excavation of trench and backfilling, compaction complete at bottom portion. Rate to include the necessary lap for jointing, wastage, and testing including bentonite powder at joints etc. complete. Measurement will be made as per finished surface area. GCL in the anchor trench will be taken in measurement.
(Note : Considering 50% extra against the quoted rate for Transportation and Installation purpose)
Quotation Rate - Rs. 195.00 per Sqm | Sqm | 293.0 | 293.0 | 2401.0 | False | None | None | False | None | False | 703493.0 | 0 | | 3891224 | 149590 | None | code03 | Suppling HDPE membrane(liner) of minimum of 1.5mm thick HDPE membrane .A certificate for the thickness shall be provided .The lowest indiviual thickness shall not be less than 90% of the specified thickness.The minimum sheet density should be .94g/cc measyred as per ASTM D1055.Yeild Tensile strength shall be greater than 115 N/cm,break elongation 250%as per IS1969 (1985).The carbon black content should be between 2-3% with dispersion cat 1 or 2 as per ASTM D 5596.The cost of the liner including material ,labour for laying, cutting, jointing etc., complete, transportation and taxes as applicable shall be quoted by the bidder.The whole procedure of work shall be done as per the standard specifications and procedures given in section 4 of this document,laid by the pollution control board and as directed by the Engineer.This item shall be measured and paid in m2 of the finished area
(Note : Considering 50% extra against the quoted rate for Transportation and Installation purpose)
Quotation Rate - Rs. 210.00 per Sqm | Sqm | 315.0 | 315.0 | 2401.0 | False | None | None | False | None | False | 756315.0 | 0 | | 3891225 | 149590 | None | code04 | Providing and laying 20mm size graded coarse aggregates /pebble stones (For filter bed)as per drawing, specifications with all leads and lifts complete etc.,as directed by the Engineer.The rate includes cost of material, transportion, laying and compacting with all labour etc., (For drainage layers) : | Cum | 1390.5 | 1390.5 | 233.5229 | False | None | None | False | None | False | 324713.59245 | 0 | | 3891226 | 149590 | None | code05a | Supply & installation of Non-woven Geotextile (GT) of 400g/M2 made of Polypropylene of TC Mirafi (USA).
(Note : Considering 50% extra against the quoted rate for Transportation and Installation purpose)
Quotation Rate - Rs. 52.00 per Sqm | Sqm | 78.0 | 78.0 | 829.439 | False | None | None | False | None | False | 64696.242 | 0 | | 3891227 | 149590 | None | code05b | Supply & installation of Non-woven Geotextile (GT) of 400g/M2 made of Polypropylene of TC Mirafi (USA).
(Note : Considering 50% extra against the quoted rate for Transportation and Installation purpose)
Quotation Rate - Rs. 52.00 per Sqm | Sqm | 78.0 | 78.0 | 2401.0 | False | None | None | False | None | False | 187278.0 | 0 | | 3891228 | 149590 | None | code06 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. - : HDPE Grade PE80-PN10.0, 200mm dia | Mtr | 1991.09 | 1991.09 | 160.0 | False | None | None | False | None | False | 318574.4 | 0 | | 3891229 | 149590 | None | code07 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. - : HDPE Grade PE80-PN10.0, 250mm dia | Mtr | 3143.97 | 3143.97 | 50.0 | False | None | None | False | None | False | 157198.5 | 0 |
| | 1725078531000 | 0 | None | None | Other Works | Leachate collection tank for SLF | 304003.7 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3891230 | 149591 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 m | Cum | 75.19 | 75.19 | 48.2625 | False | None | None | False | None | False | 3628.857375 | 0 | | 3891231 | 149591 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) - Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5362.18 | 5362.18 | 3.7124 | False | None | None | False | None | False | 19906.557032 | 0 | | 3891232 | 149591 | None | code03 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6777.6 | 6777.6 | 8.7465 | False | None | None | False | None | False | 59280.2784 | 0 | | 3891233 | 149591 | None | code04 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 255.44 | 255.44 | 37.2 | False | None | None | False | None | False | 9502.368 | 0 | | 3891234 | 149591 | None | code05 | Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. | Sqm | 468.65 | 468.65 | 37.2 | False | None | None | False | None | False | 17433.78 | 0 | | 3891235 | 149591 | None | code06 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9242.19 | 9242.19 | 2.2023 | False | None | None | False | None | False | 20354.075037 | 0 | | 3891236 | 149591 | None | code07 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. | Tonne | 82705.91 | 82705.91 | 1.07 | False | None | None | False | None | False | 88495.3237 | 0 | | 3891237 | 149591 | None | code08 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. - : HDPE Grade PE80-PN10.0, 110mm dia | Mtr | 656.11 | 656.11 | 120.0 | False | None | None | False | None | False | 78733.2 | 0 | | 3891238 | 149591 | None | code09 | Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge SOR CODE V010C | Nos | 1943.61 | 1943.61 | 1.0 | False | None | None | False | None | False | 1943.61 | 0 | | 3891239 | 149591 | None | code10 | Providing and fixing PVC water stopper of suitable type of 230 mm width and 5 mm thickness for construction joints as per detailed technical specifications and as directed by Engineer-in-charge. | m | 319.3 | 319.3 | 14.8 | False | None | None | False | None | False | 4725.64 | 0 |
| | 1725078531000 | 0 | None | None | Other Works | Leachate collection tank for Processing Shed | 178494.94 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3891240 | 149592 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 m | Cum | 75.19 | 75.19 | 13.0499 | False | None | None | False | None | False | 981.221981 | 0 | | 3891241 | 149592 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) - Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5362.18 | 5362.18 | 1.3499 | False | None | None | False | None | False | 7238.406782 | 0 | | 3891242 | 149592 | None | code03 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6777.6 | 6777.6 | 2.944 | False | None | None | False | None | False | 19953.2544 | 0 | | 3891243 | 149592 | None | code04 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 255.44 | 255.44 | 10.05 | False | None | None | False | None | False | 2567.172 | 0 | | 3891244 | 149592 | None | code05 | Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. | Sqm | 468.65 | 468.65 | 10.05 | False | None | None | False | None | False | 4709.9325 | 0 | | 3891245 | 149592 | None | code06 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9242.19 | 9242.19 | 0.4998 | False | None | None | False | None | False | 4619.246562 | 0 | | 3891246 | 149592 | None | code07 | Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. | Tonne | 82705.91 | 82705.91 | 0.434 | False | None | None | False | None | False | 35894.36494 | 0 | | 3891247 | 149592 | None | code08 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. - : HDPE Grade PE80-PN10.0, 110mm dia | Mtr | 656.11 | 656.11 | 150.0 | False | None | None | False | None | False | 98416.5 | 0 | | 3891248 | 149592 | None | code09 | Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge SOR CODE V010C | Nos | 1943.61 | 1943.61 | 1.0 | False | None | None | False | None | False | 1943.61 | 0 | | 3891249 | 149592 | None | code10 | Providing and fixing PVC water stopper of suitable type of 230 mm width and 5 mm thickness for construction joints as per detailed technical specifications and as directed by Engineer-in-charge. | m | 319.3 | 319.3 | 6.8 | False | None | None | False | None | False | 2171.24 | 0 |
|
|
|---|