| 1725186854000 | 0 | None | None | Water supply/sewage lines | Construction of Solid Waste Management unit, Earth Worm Unit & Labour Building in Sulikunte Village at Kodathi Grama Panchayat in Banaglore East Taluk in Bangalore Urban District. | 3775671.43 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3898693 | 150099 | None | lwm-01 | Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth | Cum | 362.0 | 362.0 | 119.19 | False | None | None | False | None | False | 43146.78 | 0 | | 3898694 | 150099 | None | lwm-02 | Providing and laying in position Cement Concrete for levelling course for all works in undation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per elevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5989.0 | 5989.0 | 54.64 | False | None | None | False | None | False | 327238.96 | 0 | | 3898695 | 150099 | None | lwm-03 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & ormwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6756.48 | 6756.48 | 44.72 | False | None | None | False | None | False | 302149.7856 | 0 | | 3898696 | 150099 | None | lwm-04 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure worksof bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7390.44 | 7390.44 | 29.72 | False | None | None | False | None | False | 219643.8768 | 0 | | 3898697 | 150099 | None | lwm-05 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). | Cum | 6389.0 | 6389.0 | 48.05 | False | None | None | False | None | False | 306991.45 | 0 | | 3898698 | 150099 | None | lwm-06 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m | Cum | 266.0 | 266.0 | 319.41 | False | None | None | False | None | False | 84963.06 | 0 | | 3898699 | 150099 | None | lwm-07 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications | Sqm | 1231.0 | 1231.0 | 376.46 | False | None | None | False | None | False | 463422.26 | 0 | | 3898700 | 150099 | None | lwm-08 | Providing and laying in position Cement Concrete for levelling course for all works in undation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per elevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of achineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6217.0 | 6217.0 | 9.53 | False | None | None | False | None | False | 59248.01 | 0 | | 3898701 | 150099 | None | lwm-09 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 312.0 | 312.0 | 168.51 | False | None | None | False | None | False | 52575.12 | 0 | | 3898702 | 150099 | None | lwm-10 | Providing 18 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Cum | 371.0 | 371.0 | 593.28 | False | None | None | False | None | False | 220106.88 | 0 | | 3898703 | 150099 | None | lwm-11 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 429.0 | 429.0 | 112.16 | False | None | None | False | None | False | 48116.64 | 0 | | 3898704 | 150099 | None | lwm-12 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 174.0 | 174.0 | 565.54 | False | None | None | False | None | False | 98403.96 | 0 | | 3898705 | 150099 | None | lwm-13 | Providing and fixing Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes including cost of materials, labour, usagecharges of machinery complete as per specifications and as per directions
of the Engineer-in-Charge. | Kg | 136.0 | 136.0 | 3523.64 | False | None | None | False | None | False | 479215.04 | 0 | | 3898706 | 150099 | None | lwm-14 | Providing & fixing corrugated G.S. sheet roofing including vertical /
curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ m² | Sqm | 879.0 | 879.0 | 471.0 | False | None | None | False | None | False | 414009.0 | 0 | | 3898707 | 150099 | None | lwm-15 | Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour completeas per specifications and as per directions of Engineer-in-charge. | Sqm | 167.0 | 167.0 | 312.79 | False | None | None | False | None | False | 52235.93 | 0 | | 3898708 | 150099 | None | lwm-16 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Dam & Allied Works | Kg | 8884.2 | 8884.2 | 25.0 | False | None | None | False | None | False | 222105.0 | 0 | | 3898709 | 150099 | None | lwm-17 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 2633.0 | 2633.0 | 18.0 | False | None | None | False | None | False | 47394.0 | 0 | | 3898710 | 150099 | None | lwm-18 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 168.0 | 168.0 | 1224.96 | False | None | None | False | None | False | 205793.28 | 0 | | 3898711 | 150099 | None | lwm-19 | Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm | Sqm | 1238.0 | 1238.0 | 15.02 | False | None | None | False | None | False | 18594.76 | 0 | | 3898712 | 150099 | None | lwm-20 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. . | Sqm | 889.0 | 889.0 | 41.43 | False | None | None | False | None | False | 36831.27 | 0 | | 3898713 | 150099 | None | lwm-21 | Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 108.0 | 108.0 | 68.59 | False | None | None | False | None | False | 7407.72 | 0 | | 3898714 | 150099 | None | lwm-22 | partitions with extruded built up standard tubular sections/
appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required
shade according to IS: 1868, Minimum anodic coating of grade
AC 15) including cost of materials,labour,usage charges of machinery
complete as per specifications. | Each | 1109.0 | 1109.0 | 10.0 | False | None | None | False | None | False | 11090.0 | 0 | | 3898715 | 150099 | None | lwm-23 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Each | 4884.0 | 4884.0 | 3.0 | False | None | None | False | None | False | 14652.0 | 0 | | 3898716 | 150099 | None | lwm-24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Ltr | 9.0 | 9.0 | 1000.0 | False | None | None | False | None | False | 9000.0 | 0 | | 3898717 | 150099 | None | lwm-25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes | m | 318.0 | 318.0 | 50.0 | False | None | None | False | None | False | 15900.0 | 0 | | 3898718 | 150099 | None | lwm-26 | Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest ammendments complte etc. 1.00 HP/0.75KW 7STG | Each | 13318.0 | 13318.0 | 1.0 | False | None | None | False | None | False | 13318.0 | 0 | | 3898719 | 150099 | None | lwm-27 | C.I manhole cover with frame 610x455mm size (P. No.15 SI.No.623 RWS SR. 2019-20) | Each | 2118.64 | 2118.64 | 1.0 | False | None | None | False | None | False | 2118.64 | 0 |
|