1725259109000 | 1 | None | None | Buildings | construction of kitchen and toilet in government higher primary school at ward no 19 under TCC limits. | 1334694.15 | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
---|
3900695 | 150258 | None | DMA01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 107.1 | 107.1 | 39.61 | False | None | None | False | None | False | 4242.231 | 0 | 3900696 | 150258 | None | DMA02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse
aggregates | Cum | 6288.45 | 6288.45 | 13.6 | False | None | None | False | None | False | 85522.92 | 0 | 3900697 | 150258 | None | DMA03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5891.55 | 5891.55 | 21.54 | False | None | None | False | None | False | 126903.987 | 0 | 3900698 | 150258 | None | DMA04 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications | Cum | 1292.55 | 1292.55 | 15.24 | False | None | None | False | None | False | 19698.462 | 0 | 3900699 | 150258 | None | DMA05 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD VOL-1 UNI SR 2023-24, Page 16, Item No 2.3.1) | Cum | 6639.15 | 6639.15 | 5.46 | False | None | None | False | None | False | 36249.759 | 0 | 3900700 | 150258 | None | DMA06 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7185.15 | 7185.15 | 10.37 | False | None | None | False | None | False | 74510.0055 | 0 | 3900701 | 150258 | None | DMA07 | Formwork
As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.
Consider 50% of item concrete rate for Roofs | Cum | 3592.58 | 3592.58 | 7.69 | False | None | None | False | None | False | 27626.9402 | 0 | 3900702 | 150258 | None | DMA08 | Formwork
As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.
Consider 70% of item concrete rate for Columns | Cum | 5029.61 | 5029.61 | 1.5 | False | None | None | False | None | False | 7544.415 | 0 | 3900703 | 150258 | None | DMA09 | Formwork
As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.
Consider 60% of item concrete rate for Beams and lintels (rate=6492*60%) | Sqm | 4311.09 | 4311.09 | 11.4 | False | None | None | False | None | False | 49146.426 | 0 | 3900704 | 150258 | None | DMA10 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification a. Buildings | Tonne | 93929.85 | 93929.85 | 1.162 | False | None | None | False | None | False | 109146.4857 | 0 | 3900705 | 150258 | None | DMA11 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm | Sqm | 1233.75 | 1233.75 | 35.28 | False | None | None | False | None | False | 43526.7 | 0 | 3900706 | 150258 | None | DMA12 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing,
polishing complete as per specifications. (PWD SRRB 2023-24, VOL-2, Page -64, Item No 9.36) | Sqm | 1732.5 | 1732.5 | 135.0 | False | None | None | False | None | False | 233887.5 | 0 | 3900707 | 150258 | None | DMA13 | Providing 12 mm cement plaster with Cement mortar 1:4 (1 cement: 4 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 267.75 | 267.75 | 51.25 | False | None | None | False | None | False | 13722.1875 | 0 | 3900708 | 150258 | None | DMA14 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 260.4 | 260.4 | 61.62 | False | None | None | False | None | False | 16045.848 | 0 | 3900709 | 150258 | None | DMA15 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (PWD VOL-2 SR 2023-24, Page 86, Item No 11.34A) | Kgs | 176.4 | 176.4 | 60.0 | False | None | None | False | None | False | 10584.0 | 0 | 3900710 | 150258 | None | DMA16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per speifications and as per directions of Engineer-in-charge | Sqm | 120.75 | 120.75 | 60.0 | False | None | None | False | None | False | 7245.0 | 0 | 3900711 | 150258 | None | DMA17 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 103755.75 | 103755.75 | 2.1 | False | None | None | False | None | False | 217887.075 | 0 | 3900712 | 150258 | None | DMA18 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) | Sqm | 6904.8 | 6904.8 | 21.0 | False | None | None | False | None | False | 145000.8 | 0 | 3900713 | 150258 | None | DMA19 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. | Kg | 474.6 | 474.6 | 40.0 | False | None | None | False | None | False | 18984.0 | 0 | 3900714 | 150258 | None | DMA20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 474.6 | 474.6 | 4.8 | False | None | None | False | None | False | 2278.08 | 0 | 3900715 | 150258 | None | DMA21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work,20 mm nominal dia Pipes | Mtr | 9.45 | 9.45 | 50.0 | False | None | None | False | None | False | 472.5 | 0 | 3900716 | 150258 | None | DMA22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | l | 9.45 | 9.45 | 1000.0 | False | None | None | False | None | False | 9450.0 | 0 | 3900717 | 150258 | None | DMA23 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | No | 3236.1 | 3236.1 | 2.0 | False | None | None | False | None | False | 6472.2 | 0 | 3900718 | 150258 | None | DMA24 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 | Each | 666.75 | 666.75 | 5.0 | False | None | None | False | None | False | 3333.75 | 0 | 3900719 | 150258 | None | DMA25 | Supplying and fixing sheet Metalbox made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm | Each | 145.95 | 145.95 | 4.0 | False | None | None | False | None | False | 583.8 | 0 | 3900720 | 150258 | None | DMA26 | Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2 mm thick | Mtr | 72.45 | 72.45 | 100.0 | False | None | None | False | None | False | 7245.0 | 0 | 3900721 | 150258 | None | DMA27 | Supplying and wiring adopting loop system in existing PVCConduit/casing capping using2x1.5Sqmm (Phase&Neutral)&1x1.0sqmm (Earthwire) FRL Smultistrand PVC insulated copperwire (confirmingtoIS 694: and latestamendments) with a6Amps flushtype SPcontrol switch shall be fixed on the existing plastic sheet/gangbox,the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete for each outlet. medium point above 3M tr upto 6Mtr from tapping point to outlet via switch | Point | 413.7 | 413.7 | 5.0 | False | None | None | False | None | False | 2068.5 | 0 | 3900722 | 150258 | None | DMA28 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1Sq.mm | Mtr | 19.95 | 19.95 | 40.0 | False | None | None | False | None | False | 798.0 | 0 | 3900723 | 150258 | None | DMA29 | 1.5Sq.mm | Mtr | 27.3 | 27.3 | 25.0 | False | None | None | False | None | False | 682.5 | 0 | 3900724 | 150258 | None | DMA30 | 2.5Sq.mm | Mtr | 44.1 | 44.1 | 25.0 | False | None | None | False | None | False | 1102.5 | 0 | 3900725 | 150258 | None | DMA31 | Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module | Each | 374.85 | 374.85 | 2.0 | False | None | None | False | None | False | 749.7 | 0 | 3900726 | 150258 | None | DMA32 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket | Each | 179.55 | 179.55 | 2.0 | False | None | None | False | None | False | 359.1 | 0 | 3900727 | 150258 | None | DMA33 | Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W | Each | 724.5 | 724.5 | 4.0 | False | None | None | False | None | False | 2898.0 | 0 | 3900728 | 150258 | None | DMA34 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 56" Sweep (1400 mm) Regular model | Each | 3182.55 | 3182.55 | 2.0 | False | None | None | False | None | False | 6365.1 | 0 | 3900729 | 150258 | None | DMA35 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve ,indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898. | Each | 832.65 | 832.65 | 2.0 | False | None | None | False | None | False | 1665.3 | 0 | 3900730 | 150258 | None | DMA36 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (PWD SR VOL2,2023-24, Page 60, Item No 9.9) | Sqm | 1129.8 | 1129.8 | 7.2 | False | None | None | False | None | False | 8134.56 | 0 | 3900731 | 150258 | None | DMA37 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR VOL2,2023-24, Page 45, Item No 8.25) | Sqm | 143.85 | 143.85 | 97.14 | False | None | None | False | None | False | 13973.589 | 0 | 3900732 | 150258 | None | DMA38 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm | Each | 3724.35 | 3724.35 | 2.0 | False | None | None | False | None | False | 7448.7 | 0 | 3900733 | 150258 | None | DMA39 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) (PWD SR VOL2,2023-24, Page 46, Item No 8.33.1) | Sqm | 165.9 | 165.9 | 67.14 | False | None | None | False | None | False | 11138.526 | 0 |
|