createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724045338275 version 13 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 445000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 03-10-2024 17:00:00 tenderQueryClose 18-09-2024 16:00:00 technicalBidOpen 04-10-2024 17:05:00 publishedDate 03-09-2024 12:54:41 publishedByPost DUDC_EE_HAV publishedByUser KPE12612 - Mattikatti S S bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 30-08-2024 16:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson S S Mattikatti EE splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 8660975885 mobileNumber 9481724539 tenderSupplierList None
tenderSchedule	createdTs 1724045338350 version 7 createdDate None modifiedDate None tenderNumber DMA/2024-25/OW/WORK_INDENT25085 title Improvements of Roads & Drains in Haveri CMC under Amruth Nagarotthan Phase 4(296.73Lakhs) description Improvements of Roads & Drains in Haveri CMC under Amruth Nagarotthan Phase 4(296.73Lakhs) category WORKS categoryText Works ecv 29663736.55 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2192 locationName DMA District Urban Development Cell Haveri provisionalAmount 29673000.0 groupOverheadTotal 4524976.76 fileNumber DMA/2024-25/ANH-4/CMCHAVERI/Pakage2
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724045338000 1 None None Other Works 2 sides RCC from LK Ladwa house to Praveen Shetty house in Ward No.2. Construction of Open Sewer, Asphalting &Pavers (Rs 36.00 Lakhs), Asphalting & 2 Side R.C.C from Bankara House to Puttana Gowdra Basar Sir House in Ward No.2. Construction of open sewer (Rs. 34.00 Lakhs), 2 sides of community in Ward No. 15 R.C.C. Open Sewer (Rs 19.00 Lakhs), Construction of SC/ST Community Bhavan (Rs 50.73 Lakhs) at Nagendramatti in Ward No. 5, (139.73L)-SCP WORKS 11840385.62 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3804622 144486 None code01 Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.(PWD SR 2023-24 Vol:3 P.NO.09 I.No2.5ii(A) ) 100 Sqm 404.79 404.79 10.6 False None None False None False 4290.774 0 3804623 144486 None code02 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead(PWD SR 2023-24 Vol.3 P.NO.17 I.NO 3.5) Sqm 6.18 6.18 1590.0 False None None False None False 9826.2 0 3804624 144486 None code03 Wet Mix Macadam (Plant Mix Method)-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(KPWD SR 2023-24, Vol 3, Pg.No.26, It.No.4.17) Cum 2635.77 2635.77 441.375 False None None False None False 1163362.98375 0 3804625 144486 None code04 Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.1-A) Sqm 42.23 42.23 2650.0 False None None False None False 111909.5 0 3804626 144486 None code05 Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface (KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.3-ii) Sqm 14.42 14.42 2650.0 False None None False None False 38213.0 0 3804627 144486 None code06 Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(KPWD SR 2023-24 Vol.3 P.NO.32 I.NO 5.6C) Cum 7685.86 7685.86 132.5 False None None False None False 1018376.45 0 3804628 144486 None code07 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. (PWD SR 2023-24 Vol.3 P.NO.43 I.NO 5.31) Cum 10456.56 10456.56 66.25 False None None False None False 692747.1 0 3804629 144486 None code08 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per RC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(KPWD SR 2023-24, Vol 3, Pg.No.67, It.No.8.15) Sqm 545.9 545.9 106.0 False None None False None False 57865.4 0 3804630 144486 None code09 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804(KPWD SR 2023-24, Vol 3, Pg.No.78, It.No.8.54) Each 9270.0 9270.0 2.0 False None None False None False 18540.0 0 3804631 144486 None code10 Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover, curing, refilling with appurtenances complete.Upto 0.30m depth-(KPWD SR 2023-24, Vol 5, Pg.No.198, It.No.16.28.1) Nos 8414.07 8414.07 18.0 False None None False None False 151453.26 0 3804632 144486 None code11 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 824.2 False None None False None False 205440.092 0 3804633 144486 None code12 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 80.98 False None None False None False 499538.8966 0 3804634 144486 None code13 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other ppurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 91.47 False None None False None False 588178.6263 0 3804635 144486 None code14 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 6512.69 6512.69 121.28 False None None False None False 789859.0432 0 3804636 144486 None code15 For Centering & Shuttering @35% Cum 2279.44 2279.44 121.28 False None None False None False 276450.4832 0 3804637 144486 None code16 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 11.0311 False None None False None False 897725.589363 0 3804638 144486 None code17 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3).(PWD SR 2023-24 Vol:3 P.NO.5 I.No.1.1A) Cum 139.05 139.05 824.2 False None None False None False 114605.01 0 3804639 144486 None code18 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size(PWD SR 2023-24 Vol:3 P.NO.73 I.No.8.42.3) m 476.89 476.89 390.0 False None None False None False 185987.1 0 3804640 144486 None code19 Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification)(PWD SR 2023-24 Vol:3 P.NO.51 I.No.6.8.2) Sqm 1195.83 1195.83 292.5 False None None False None False 349780.275 0 3804641 144486 None code20 Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(PWD SR 2023-24 Vol:3 P.NO.66 I.No.8.10) Sqm 112.27 112.27 136.5 False None None False None False 15324.855 0 3804642 144486 None code21 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical pecifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.(KPWD 2023-24 Page No.27.Vol-1 I.no.1.1) Cum 93.73 93.73 275.5 False None None False None False 25822.615 0 3804643 144486 None code22 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m(Page No.08. Iitem no.1.14.1 of Vol-1-CSR-KPWD 2023-24) Cum 105.06 105.06 52.452 False None None False None False 5510.60712 0 3804644 144486 None code23 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In ordinary/soft rock without blasting upto 1.5 m depth(Page No.08. Iitem no.1.15.1 of Vol-1-CSR-KPWD 2023-2024) Cum 373.89 373.89 13.113 False None None False None False 4902.81957 0 3804645 144486 None code24 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Page No.34. Iitem no.1.9 of Vol-1-CSR-KPWD 2023-2024) Cum 273.98 273.98 57.599 False None None False None False 15780.97402 0 3804646 144486 None code25 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.1.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6168.67 6168.67 39.0145 False None None False None False 240667.575715 0 3804647 144486 None code26 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(Page No.09. Iitem no.5.4 of Vol-2-CSR-KPWD 2023-2024) Cum 6580.67 6580.67 23.565 False None None False None False 155073.48855 0 3804648 144486 None code27 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 24.0 False None None False None False 156625.92 0 3804649 144486 None code28 For Centering & Shuttering @8% Cum 522.09 522.09 24.0 False None None False None False 12530.16 0 3804650 144486 None code29 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 2.6879 False None None False None False 17541.450432 0 3804651 144486 None code30 For Centering & Shuttering @5% Cum 326.3 326.3 2.6879 False None None False None False 877.06177 0 3804652 144486 None code31 Providing and laying in cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.3.2 of Vol-1-CSR-KPWD 2023-2024) Cum 6674.4 6674.4 22.4887 False None None False None False 150098.57928 0 3804653 144486 None code32 For Centering & Shuttering @50% Cum 3337.2 3337.2 22.4887 False None None False None False 75049.28964 0 3804654 144486 None code33 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 2.6999 False None None False None False 17619.763392 0 3804655 144486 None code34 For Centering & Shuttering @70% Cum 4568.26 4568.26 2.699 False None None False None False 12329.73374 0 3804656 144486 None code35 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 16.2 False None None False None False 114182.298 0 3804657 144486 None code36 For Centering & Shuttering @70% Cum 4933.8 4933.8 16.2 False None None False None False 79927.56 0 3804658 144486 None code37 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 22.4459 False None None False None False 158205.212511 0 3804659 144486 None code38 For Centering & Shuttering @60% Cum 4228.97 4228.97 22.4459 False None None False None False 94923.037723 0 3804660 144486 None code39 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 45.9975 False None None False None False 324203.719275 0 3804661 144486 None code40 For Centering & Shuttering @50% Cum 3524.15 3524.15 45.9975 False None None False None False 162102.089625 0 3804662 144486 None code41 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 6.1537 False None None False None False 43373.062173 0 3804663 144486 None code42 For Centering & Shuttering @45% Cum 3171.73 3171.73 6.1537 False None None False None False 19517.874901 0 3804664 144486 None code43 Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification. (The laps and wastages shall not be measured separately)(Page No.18. Iitem no.2.11a of Vol-1-CSR-KPWD 2023-2024) Tonne 92140.71 92140.71 10.5523 False None None False None False 972296.414133 0 3804665 144486 None code44 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(KPWD 2023-24 Page No.17.Vol-2 I.no.6.32 ) Sqm 1349.3 1349.3 125.8199 False None None False None False 169768.79107 0 3804666 144486 None code45 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications(KPWD 2023-24 Page No.17.Vol-2 I.no.6.33 ) Sqm 1267.93 1267.93 43.44 False None None False None False 55078.8792 0 3804667 144486 None code46 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.41.Vol-2 I.no.8.4.2) Sqm 321.36 321.36 394.07 False None None False None False 126638.3352 0 3804668 144486 None code47 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.42.Vol-2 I.no.8.5.2) Sqm 359.47 359.47 164.309 False None None False None False 59064.15623 0 3804669 144486 None code48 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm(KPWD 2023-24 Page No.60.Vol-2 I.no.9.12.2) Sqm 1179.35 1179.35 160.0 False None None False None False 188696.0 0 3804670 144486 None code49 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile)(KPWD 2023-24 Page No.60.Vol-2 I.no.9.7.2) Sqm 1297.8 1297.8 160.0 False None None False None False 207648.0 0 3804671 144486 None code50 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.(KPWD 2023-24 Page No.64.Vol-2 I.no.9.30) Sqm 5487.84 5487.84 3.45 False None None False None False 18933.048 0 3804672 144486 None code51 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.(KPWD 2023-24 Page No.60.Vol-2 I.no.9.9) Sqm 1108.28 1108.28 10.08 False None None False None False 11171.4624 0 3804673 144486 None code52 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.45.Vol-2 I.no.8.29) Sqm 291.49 291.49 164.309 False None None False None False 47894.43041 0 3804674 144486 None code53 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(KPWD 2023-24 Page No.50.Vol-2 I.no.8.51) Sqm 103.0 103.0 394.07 False None None False None False 40589.21 0 3804675 144486 None code54 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.48.Vol-2 I.no.8.39) Sqm 130.81 130.81 394.07 False None None False None False 51548.2967 0 3804676 144486 None code55 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(KPWD 2023-24 Page No.99.Vol-2 I.no-12.11) Cum 142216.22 142216.22 0.3068 False None None False None False 43631.936296 0 3804677 144486 None code56 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(KPWD 2023-24 Page No.105.Vol-2 I.no-12.57.1) Sqm 4164.29 4164.29 12.18 False None None False None False 50721.0522 0 3804678 144486 None code57 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x40x2.5 mm (ordinary type)(KPWD 2023-24 Page No.107.Vol-2 I.no-12.75.6) Nos 105.06 105.06 15.0 False None None False None False 1575.9 0 3804679 144486 None code58 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.2) Each 360.5 360.5 15.0 False None None False None False 5407.5 0 3804680 144486 None code59 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.4) Each 202.91 202.91 15.0 False None None False None False 3043.65 0 3804681 144486 None code60 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.61) Each 1019.7 1019.7 5.0 False None None False None False 5098.5 0 3804682 144486 None code61 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.60) Nos 1083.56 1083.56 5.0 False None None False None False 5417.8 0 3804683 144486 None code62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.62) Nos 244.11 244.11 5.0 False None None False None False 1220.55 0 3804684 144486 None code63 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.59) Nos 1147.42 1147.42 5.0 False None None False None False 5737.1 0 3804685 144486 None code64 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.58) Nos 123.6 123.6 5.0 False None None False None False 618.0 0 3804686 144486 None code65 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(KPWD 2023-24 Page No.104.Vol-2 I.no-12.51) Nos 1046.48 1046.48 1.0 False None None False None False 1046.48 0 3804687 144486 None code66 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(KPWD 2023-24 Page No.86.Vol-2 I.no-11.34A) Kg 173.04 173.04 330.48 False None None False None False 57186.2592 0 3804688 144486 None code67 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.110.Vol-2 I.no-12.90) Sqm 6936.02 6936.02 18.0 False None None False None False 124848.36 0 3804689 144486 None code68 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.109.Vol-2 I.no-12.85) Sqm 5890.57 5890.57 0.36 False None None False None False 2120.6052 0 3804690 144486 None code69 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.47.Vol-2 I.no-8.34.2) Sqm 59.74 59.74 12.18 False None None False None False 727.6332 0 3804691 144486 None code70 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.46.Vol-2 I.no-8.33.2) Sqm 142.14 142.14 9.45 False None None False None False 1343.223 0 3804692 144486 None code71 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.48.Vol-2 I.no-8.37) Sqm 134.93 134.93 18.36 False None None False None False 2477.3148 0 3804693 144486 None code72 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as(KPWD 2023-24 Page No.85.Vol-2 I.no-11.28) Kg 581.95 581.95 75.0 False None None False None False 43646.25 0 3804694 144486 None code73 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in-Charge(Page No.84. Iitem no.11.26.1 of Vol-2-CSR-KPWD 2023-24) Kg 142.14 142.14 155.399 False None None False None False 22088.41386 0 3804695 144486 None code74 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3).(PWD SR 2023-24 Vol:3 P.NO.5 I.No.1.1A) Cum 139.05 139.05 341.065 False None None False None False 47425.08825 0 3804696 144486 None code75 Open Conduit System SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructureorrawlplugsincaseofbrickwallsandcementplasteringthedamagedportionusingheavygauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.1.1) m 71.07 71.07 50.0 False None None False None False 3553.5 0 3804697 144486 None code76 Open Conduit System SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructureorrawlplugsincaseofbrickwallsandcementplasteringthedamagedportionusingheavygauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.1.2) m 83.43 83.43 50.0 False None None False None False 4171.5 0 3804698 144486 None code77 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.1) m 70.04 70.04 50.0 False None None False None False 3502.0 0 3804699 144486 None code78 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.25 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.2) m 81.37 81.37 50.0 False None None False None False 4068.5 0 3804700 144486 None code79 Concealed Conduit System SupplyingheavygaugePVCconduitpipe......mmdia..........mmthickconfirmingtoIS2509withsuitablesizebends,metal/PVCJunctionboxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab.TheconduitshouldbetiedtothereinforcementrodsbyusingbindingwiresandunusedwaysofjunctionboxesandpipeendsshouldbecoveredusingPVCendenclosures,runwith18SWGGIfishwirewherever necessary.32 mm dia 2.5 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.01, Item No. 1.2.3) m 106.09 106.09 50.0 False None None False None False 5304.5 0 3804701 144486 None code80 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.32 mm dia 2.5 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.01, Item No. 1.3.3) m 101.97 101.97 50.0 False None None False None False 5098.5 0 3804702 144486 None code81 Supplying.........Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM.S.flatframeworkinexistingpanelboard.ThebusbarshallhavesuitableholesforterminationofincomingandoutgoingcablesasperISspecification with necessary bolts, nuts and washers etc., complete250 A 4 x 30 x 10 mm Aluminium Strips(CSR-KPWD - Electrical SR, 2023-24: Page No.20, Item No. 5.40.2) m 3538.05 3538.05 15.0 False None None False None False 53070.75 0 3804703 144486 None code82 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.1) Point 293.55 293.55 40.0 False None None False None False 11742.0 0 3804704 144486 None code83 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.edium point above 3m upto 6m from tapping point to out let via switch.(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.2) Point 405.82 405.82 20.0 False None None False None False 8116.4 0 3804705 144486 None code84 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.3) Point 587.1 587.1 20.0 False None None False None False 11742.0 0 3804706 144486 None code85 Supplying6Aflushtypesocketand6AflushtypeSPswitcheithersurface/flushmountinginexistinggangboxorin4mmthickplasticsheetandfixingoveraflushmountedwoodenboxandwiringusingnecessary capacity wires as required as per IS 1293 and IS 3854 6 Amps 3/5 way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.1.2) Each 151.41 151.41 20.0 False None None False None False 3028.2 0 3804707 144486 None code86 Supplyingandmounting2Nos.of2Way6Aflushtypeswitcheseithersurface/flushmountedonexistinggangboxorin4mmthickplasticsheetandmountedonaflushmountedwoodenboxandwiringas per IS 3854(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.2) Each 175.1 175.1 15.0 False None None False None False 2626.5 0 3804708 144486 None code87 Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 1 mm2(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.1) m 19.57 19.57 50.0 False None None False None False 978.5 0 3804709 144486 None code88 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 2.5 mm2 (CSR-KPWD - Electrical SR,2023-24: Page No.05, Item No. 2.3.3) m 43.26 43.26 80.0 False None None False None False 3460.8 0 3804710 144486 None code89 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 4.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.4) m 64.89 64.89 30.0 False None None False None False 1946.7 0 3804711 144486 None code90 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 10.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.03, Item No. 2.3.6) m 172.01 172.01 14.0 False None None False None False 2408.14 0 3804712 144486 None code91 Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball bearing system.48" Sweep (1200 mm) Regular model(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.3.1) Each 3073.52 3073.52 3.0 False None None False None False 9220.56 0 3804713 144486 None code92 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to theexistingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 / 0.0076 inch PVC insulated twintwisted copper wire and wiring(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.10) Nos 176.13 176.13 3.0 False None None False None False 528.39 0 3804714 144486 None code93 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.-6A Pendant Holder(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.6) Nos 73.13 73.13 10.0 False None None False None False 731.3 0 3804715 144486 None code94 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.- 6A Bakelite Ceiling Rose(CSR-KPWD - Electrical SR, 2023-24: Page No10, Item No. 3.14.5) Nos 80.34 80.34 6.0 False None None False None False 482.04 0 3804716 144486 None code95 Supplying of recess mounting non integrated type LED down light15-18W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceilingclA, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread,life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF 0.95, power lossshould 5% of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20%,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABL/CPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standard electrical condition.(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No.11.1) Each 1721.1 1721.1 4.0 False None None False None False 6884.4 0 3804717 144486 None code96 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.- 15" Sweep (450 mm)(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.2.2) Each 4579.38 4579.38 2.0 False None None False None False 9158.76 0 3804718 144486 None code97 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVCinsulated twin core wire of approved make with wire meshand wooden frame.(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.13) Each 728.21 728.21 3.0 False None None False None False 2184.63 0 3804719 144486 None code98 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.3) Each 413.03 413.03 3.0 False None None False None False 1239.09 0 3804720 144486 None code99 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 100 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.4) Each 711.73 711.73 3.0 False None None False None False 2135.19 0 3804721 144486 None code100 Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10KandcompletewiringasrequiredconfirmingtoIEC60898. 6 - 32 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.4) Each 761.17 761.17 8.0 False None None False None False 6089.36 0 3804722 144486 None code101 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.6) Each 1135.06 1135.06 8.0 False None None False None False 9080.48 0 3804723 144486 None code102 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.7) Each 1768.51 1768.51 5.0 False None None False None False 8842.55 0 3804724 144486 None code103 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.18.9) Each 3180.64 3180.64 8.0 False None None False None False 25445.12 0 3804725 144486 None code104 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door -16 Way SP & N (CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.5) Each 3019.96 3019.96 4.0 False None None False None False 12079.84 0 3804726 144486 None code105 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door-12 Way SP & N(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.9) Each 2398.87 2398.87 2.0 False None None False None False 4797.74 0 3804727 144486 None code106 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.1) Each 4405.31 4405.31 1.0 False None None False None False 4405.31 0 3804728 144486 None code107 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.4) Each 4695.77 4695.77 1.0 False None None False None False 4695.77 0 3804729 144486 None code108 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.8) Each 5301.41 5301.41 1.0 False None None False None False 5301.41 0 3804730 144486 None code109 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.10) Each 5711.35 5711.35 1.0 False None None False None False 5711.35 0 3804731 144486 None code110 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall1-3 Way(CSR-KPWD - Electrical SR,2023-24: Page No.8, Item No. 3.4.2) Each 163.77 163.77 6.0 False None None False None False 982.62 0 3804732 144486 None code111 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-5 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.3) Each 182.31 182.31 6.0 False None None False None False 1093.86 0 3804733 144486 None code112 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall6 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.4) Each 226.6 226.6 6.0 False None None False None False 1359.6 0 3804734 144486 None code113 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.5) Each 268.83 268.83 5.0 False None None False None False 1344.15 0 3804735 144486 None code114 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall10-12 Way (CSR-KPWD - Electrical SR, 2022-23: Page No.08, Item No. 3.4.6) Each 328.57 328.57 5.0 False None None False None False 1642.85 0 3804736 144486 None code115 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.7) Each 373.89 373.89 3.0 False None None False None False 1121.67 0 3804737 144486 None code116 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 3 Module(CSR-KPWD - Electrical SR,2023-24: Page No.08, Item No. 3.5.2) Each 165.83 165.83 6.0 False None None False None False 994.98 0 3804738 144486 None code117 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.3) Each 180.25 180.25 6.0 False None None False None False 1081.5 0 3804739 144486 None code118 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.4) Each 241.02 241.02 6.0 False None None False None False 1446.12 0 3804740 144486 None code119 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 8 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.5) Each 292.52 292.52 5.0 False None None False None False 1462.6 0 3804741 144486 None code120 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box10-12 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.6) Each 354.32 354.32 5.0 False None None False None False 1771.6 0 3804742 144486 None code121 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 16 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.7) Each 408.91 408.91 5.0 False None None False None False 2044.55 0 3804743 144486 None code122 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch (CSR-KPWD - Electrical SR,2023-24: Page No.09, Item No. 3.6.1) Each 105.06 105.06 10.0 False None None False None False 1050.6 0 3804744 144486 None code123 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.2) Each 170.98 170.98 10.0 False None None False None False 1709.8 0 3804745 144486 None code124 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.3) Each 176.13 176.13 3.0 False None None False None False 528.39 0 3804746 144486 None code125 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.7) Each 185.4 185.4 6.0 False None None False None False 1112.4 0 3804747 144486 None code126 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.10) Each 243.08 243.08 6.0 False None None False None False 1458.48 0 3804748 144486 None code127 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.9) Each 335.78 335.78 6.0 False None None False None False 2014.68 0 3804749 144486 None code128 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.1) Each 567.53 567.53 8.0 False None None False None False 4540.24 0 3804750 144486 None code129 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.2) Each 710.7 710.7 8.0 False None None False None False 5685.6 0 3804751 144486 None code130 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 36/40 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.3) Each 1307.07 1307.07 8.0 False None None False None False 10456.56 0 3804752 144486 None code131 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 5-6W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.1) Each 588.13 588.13 4.0 False None None False None False 2352.52 0 3804753 144486 None code132 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.2) Each 911.55 911.55 4.0 False None None False None False 3646.2 0 3804754 144486 None code133 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 15-18W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.3) Each 1363.72 1363.72 4.0 False None None False None False 5454.88 0 3804755 144486 None code134 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes(KPWD -CSR, 2023-24 Page No.122, Item No. 13.31.3-Vol-2) m 327.54 327.54 25.0 False None None False None False 8188.5 0 3804756 144486 None code135 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wal --40 mm nominal dia Pipes(KPWD -CSR, 2023-24 Page No.122, Item No. 13.31.5-Vol-2) m 552.08 552.08 25.0 False None None False None False 13802.0 0 3804757 144486 None code136 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete(Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0(PWD SR 2023-24, Vol-V, Pg No-95, It No-9.1.4)HDPE Grade PE80-PN6.0,110mm dia m 483.07 483.07 20.5 False None None False None False 9902.935 0 3804758 144486 None code137 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flush ing cistern(PWD SR 2023-24, V-II, Pg No-131, It No-14.4.3) Each 9738.65 9738.65 2.0 False None None False None False 19477.3 0 3804759 144486 None code138 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (Page No.131. Iitem no.14.2.1 of Vol-2-CSR-KPWD 2023-2024) Each 4983.14 4983.14 2.0 False None None False None False 9966.28 0 3804760 144486 None code139 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (PWD SR 2023-24, V-II, Pg No-132, It No-14.7.1) Each 3174.46 3174.46 2.0 False None None False None False 6348.92 0 3804761 144486 None code140 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm(PWD SR 2023-24, V-II, Pg No-128, It No-14.32.2) Each 1048.54 1048.54 2.0 False None None False None False 2097.08 0 3804762 144486 None code141 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (PWD SR 2023-24, V-II, Pg No-131, It No-14.1.1) Each 5030.52 5030.52 2.0 False None None False None False 10061.04 0 3804763 144486 None code142 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. (PWD SR 2023-24, V-II, Pg No-137, It No-14.40.1) Each 492.34 492.34 2.0 False None None False None False 984.68 0 3804764 144486 None code143 Providing and fixing unplasticised PVC connection pipe with brass unions :15 mm nominal bore (PWD SR 2023-24, V-II, Pg No-118, It No-13.8.1.1) Nos 85.49 85.49 2.0 False None None False None False 170.98 0 3804765 144486 None code144 S.C.I. gully or nahani grating 100 mm dia(PWD SR 2023-24, V-II, Pg No-A-33, SL No-735) Nos 32.0 32.0 2.0 False None None False None False 64.0 0 3804766 144486 None code145 Providing and fixing brass bib cock of approved quality- 20 mm dia nominal bore (P.No.117, I.No. 13.2.2 of CSR 2023-24 VOL-02) Nos 314.15 314.15 10.0 False None None False None False 3141.5 0 3804767 144486 None code146 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore (PWD SR 2023-24, V-II, Pg No-117, It No-13.5.2) Nos 323.42 323.42 10.0 False None None False None False 3234.2 0 3804768 144486 None code147 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (PWD SR 2023-24, V-II, Pg No-121, It No-13.24) Nos 170.98 170.98 10.0 False None None False None False 1709.8 0 1724045339000 1 None None Other Works RCC road development in ward no 08. Open Drainage (Rs 20.00 Lakhs), Small Population Community Construction in Ward No. 03, RCC in Ward No. 07. Open Drain (Rs 20.00 Lakhs),Development of Park (Rs. 19.00 Lakhs) in Ward No.01 Vinayaka Nagar C Block, 2 sides R.C.C at 18th Cross Basaveshwar Nagar in Ward No.06. Open Sewer (Rs 58.00 Lakhs), R.C.C on one side from Sindagimat to Nagendramattiya Railway Bridge in Ward No.13. Open Drain (Rs 20.00 Lakhs)-GENERAL WORK 13298374.17 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3804769 144487 None code01 Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.(PWD SR 2023-24 Vol:3 P.NO.09 I.No2.5ii(A) ) 100 Sqm 404.79 404.79 9.8 False None None False None False 3966.942 0 3804770 144487 None code02 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead(PWD SR 2023-24 Vol.3 P.NO.17 I.NO 3.5) Sqm 6.18 6.18 1102.5 False None None False None False 6813.45 0 3804771 144487 None code03 Wet Mix Macadam (Plant Mix Method)-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(KPWD SR 2023-24, Vol 3, Pg.No.26, It.No.4.17) Cum 2635.77 2635.77 308.7 False None None False None False 813662.199 0 3804772 144487 None code04 Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.1-A) Sqm 42.23 42.23 1960.0 False None None False None False 82770.8 0 3804773 144487 None code05 Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.3-ii) Sqm 12.36 12.36 1960.0 False None None False None False 24225.6 0 3804774 144487 None code06 Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(KPWD SR 2023-24 Vol.3 P.NO.32 I.NO 5.6A) Cum 7685.86 7685.86 98.0 False None None False None False 753214.28 0 3804775 144487 None code07 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. (PWD SR 2023-24 Vol.3 P.NO.43 I.NO 5.31) Cum 10456.56 10456.56 49.0 False None None False None False 512371.44 0 3804776 144487 None code08 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per RC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(KPWD SR 2023-24, Vol 3, Pg.No.67, It.No.8.15) Sqm 545.9 545.9 98.0 False None None False None False 53498.2 0 3804777 144487 None code09 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804(KPWD SR 2023-24, Vol 3, Pg.No.78, It.No.8.54) Nos 9270.0 9270.0 1.0 False None None False None False 9270.0 0 3804778 144487 None code10 Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover, curing, refilling with appurtenances complete.Upto 0.30m depth-(KPWD SR 2023-24, Vol 5, Pg.No.198, It.No.16.28.1) Nos 8414.07 8414.07 16.0 False None None False None False 134625.12 0 3804779 144487 None code11 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.17. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-24). Cum 7048.29 7048.29 2.5392 False None None False None False 17897.017968 0 3804780 144487 None code12 For Centering & Shuttering @70%-Columns Cum 4933.8 4933.8 2.5392 False None None False None False 12527.90496 0 3804781 144487 None code13 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.17. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-24.) Cum 7048.29 7048.29 3.192 False None None False None False 22498.14168 0 3804782 144487 None code14 For Centering & Shuttering @60%-Ground Floor - Lintel Side Cum 4228.97 4228.97 3.192 False None None False None False 13498.87224 0 3804783 144487 None code15 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.17. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-24). Cum 7048.29 7048.29 8.3655 False None None False None False 58962.469995 0 3804784 144487 None code16 For Centering & Shuttering @50%-Ground Floor Slab Cum 3524.15 3524.15 8.3655 False None None False None False 29481.276825 0 3804785 144487 None code17 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.17. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-24) Cum 7048.29 7048.29 0.432 False None None False None False 3044.86128 0 3804786 144487 None code18 For Centering & Shuttering @45%-Groun Floor -Chejja Cum 3171.73 3171.73 0.432 False None None False None False 1370.18736 0 3804787 144487 None code19 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification-Buildings (KPWD 2023-24 Page No.18.Vol-1 I.no.2.11A ) Kg 92140.71 92140.71 1.8754 False None None False None False 172800.687534 0 3804788 144487 None code20 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(KPWD 2023-24 Page No.17.Vol-2 I.no.6.32 ) Sqm 1349.3 1349.3 75.93 False None None False None False 102452.349 0 3804789 144487 None code21 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.41.Vol-2 I.no.8.4.2) Sqm 321.36 321.36 131.7 False None None False None False 42323.112 0 3804790 144487 None code22 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.42.Vol-2 I.no.8.5.2) Sqm 359.47 359.47 92.84 False None None False None False 33373.1948 0 3804791 144487 None code23 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.(KPWD 2023-24 Page No.63.Vol-2 I.no.9.24) Sqm 2937.56 2937.56 43.8 False None None False None False 128665.128 0 3804792 144487 None code24 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile)(KPWD 2023-24 Page No.60.Vol-2 I.no.9.7.2) Sqm 1297.8 1297.8 87.6 False None None False None False 113687.28 0 3804793 144487 None code25 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.45.Vol-2 I.no.8.29) Sqm 291.49 291.49 92.84 False None None False None False 27061.9316 0 3804794 144487 None code26 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(KPWD 2023-24 Page No.50.Vol-2 I.no.8.51) Sqm 103.0 103.0 131.7 False None None False None False 13565.1 0 3804795 144487 None code27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.48.Vol-2 I.no.8.39) Sqm 130.81 130.81 131.7 False None None False None False 17227.677 0 3804796 144487 None code28 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(KPWD 2023-24 Page No.99.Vol-2 I.no-12.11) Cum 142216.22 142216.22 0.0772 False None None False None False 10979.092184 0 3804797 144487 None code29 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(KPWD 2023-24 Page No.105.Vol-2 I.no-12.57.1) Sqm 4164.29 4164.29 4.2 False None None False None False 17490.018 0 3804798 144487 None code30 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x40x2.5 mm (ordinary type)(KPWD 2023-24 Page No.107.Vol-2 I.no-12.75.6) Nos 105.06 105.06 3.0 False None None False None False 315.18 0 3804799 144487 None code31 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.2) Each 360.5 360.5 3.0 False None None False None False 1081.5 0 3804800 144487 None code32 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.4) Each 202.91 202.91 3.0 False None None False None False 608.73 0 3804801 144487 None code33 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.61) Nos 1019.7 1019.7 1.0 False None None False None False 1019.7 0 3804802 144487 None code34 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.60) Nos 1083.56 1083.56 1.0 False None None False None False 1083.56 0 3804803 144487 None code35 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.62) Nos 244.11 244.11 1.0 False None None False None False 244.11 0 3804804 144487 None code36 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.59) Nos 1147.42 1147.42 1.0 False None None False None False 1147.42 0 3804805 144487 None code37 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.58) Nos 123.6 123.6 1.0 False None None False None False 123.6 0 3804806 144487 None code38 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(KPWD 2023-24 Page No.104.Vol-2 I.no-12.51) Nos 1046.48 1046.48 1.0 False None None False None False 1046.48 0 3804807 144487 None code39 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(KPWD 2023-24 Page No.86.Vol-2 I.no-11.34A) Kg 173.04 173.04 136.0799 False None None False None False 23547.265896 0 3804808 144487 None code40 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.110.Vol-2 I.no-12.90) Sqm 6936.02 6936.02 7.1999 False None None False None False 49938.650398 0 3804809 144487 None code41 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.109.Vol-2 I.no-12.85) Sqm 5890.57 5890.57 0.36 False None None False None False 2120.6052 0 3804810 144487 None code42 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.47.Vol-2 I.no-8.34.2) Sqm 59.74 59.74 4.2 False None None False None False 250.908 0 3804811 144487 None code43 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.46.Vol-2 I.no-8.33.2) Sqm 142.14 142.14 4.2 False None None False None False 596.988 0 3804812 144487 None code44 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.48.Vol-2 I.no-8.37) Sqm 134.93 134.93 7.56 False None None False None False 1020.0708 0 3804813 144487 None code45 Open Conduit System SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructureorrawlplugsincaseofbrickwallsandcementplasteringthedamagedportionusingheavygauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.1.1) m 71.07 71.07 118.0 False None None False None False 8386.26 0 3804814 144487 None code46 Open Conduit System SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructureorrawlplugsincaseofbrickwallsandcementplasteringthedamagedportionusingheavygauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.1.2) m 83.43 83.43 120.0 False None None False None False 10011.6 0 3804815 144487 None code47 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.1) m 70.04 70.04 100.0 False None None False None False 7004.0 0 3804816 144487 None code48 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.25 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.2) m 81.37 81.37 90.0 False None None False None False 7323.3 0 3804817 144487 None code49 Concealed Conduit System SupplyingheavygaugePVCconduitpipe......mmdia..........mmthickconfirmingtoIS2509withsuitablesizebends,metal/PVCJunctionboxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab.TheconduitshouldbetiedtothereinforcementrodsbyusingbindingwiresandunusedwaysofjunctionboxesandpipeendsshouldbecoveredusingPVCendenclosures,runwith18SWGGIfishwirewherever necessary.32 mm dia 2.5 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.01, Item No. 1.2.3) m 106.09 106.09 110.0 False None None False None False 11669.9 0 3804818 144487 None code50 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.32 mm dia 2.5 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.01, Item No. 1.3.3) m 101.97 101.97 70.0 False None None False None False 7137.9 0 3804819 144487 None code51 Supplying.........Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM.S.flatframeworkinexistingpanelboard.ThebusbarshallhavesuitableholesforterminationofincomingandoutgoingcablesasperISspecification with necessary bolts, nuts and washers etc., complete250 A 4 x 30 x 10 mm Aluminium Strips(CSR-KPWD - Electrical SR, 2023-24: Page No.20, Item No. 5.40.2) m 3538.05 3538.05 15.0 False None None False None False 53070.75 0 3804820 144487 None code52 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.1) Point 293.55 293.55 74.0 False None None False None False 21722.7 0 3804821 144487 None code53 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.edium point above 3m upto 6m from tapping point to out let via switch.(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.2) Point 405.82 405.82 45.0 False None None False None False 18261.9 0 3804822 144487 None code54 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.3) Point 587.1 587.1 42.0 False None None False None False 24658.2 0 3804823 144487 None code55 Supplying6Aflushtypesocketand6AflushtypeSPswitcheithersurface/flushmountinginexistinggangboxorin4mmthickplasticsheetandfixingoveraflushmountedwoodenboxandwiringusingnecessary capacity wires as required as per IS 1293 and IS 3854 6 Amps 3/5 way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.1.2) Each 151.41 151.41 30.0 False None None False None False 4542.3 0 3804824 144487 None code56 Supplyingandmounting2Nos.of2Way6Aflushtypeswitcheseithersurface/flushmountedonexistinggangboxorin4mmthickplasticsheetandmountedonaflushmountedwoodenboxandwiringas per IS 3854(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.2) Each 175.1 175.1 14.0 False None None False None False 2451.4 0 3804825 144487 None code57 Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 1 mm2(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.1) m 19.57 19.57 352.0 False None None False None False 6888.64 0 3804826 144487 None code58 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 2.5 mm2 (CSR-KPWD - Electrical SR,2023-24: Page No.05, Item No. 2.3.3) m 43.26 43.26 68.0 False None None False None False 2941.68 0 3804827 144487 None code59 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 4.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.4) m 64.89 64.89 800.0 False None None False None False 51912.0 0 3804828 144487 None code60 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 10.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.03, Item No. 2.3.6) m 172.01 172.01 60.0 False None None False None False 10320.6 0 3804829 144487 None code61 Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball bearing system.48" Sweep (1200 mm) Regular model(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.3.1) Each 3073.52 3073.52 4.0 False None None False None False 12294.08 0 3804830 144487 None code62 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to theexistingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 / 0.0076 inch PVC insulated twintwisted copper wire and wiring(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.10) No 176.13 176.13 8.0 False None None False None False 1409.04 0 3804831 144487 None code63 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.-6A Pendant Holder(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.6) No 73.13 73.13 15.0 False None None False None False 1096.95 0 3804832 144487 None code64 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.- 6A Bakelite Ceiling Rose(CSR-KPWD - Electrical SR, 2023-24: Page No10, Item No. 3.14.5) No 80.34 80.34 10.0 False None None False None False 803.4 0 3804833 144487 None code65 Supplying of recess mounting non integrated type LED down light15-18W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceilingclA, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread,life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF 0.95, power lossshould 5% of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20%,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABL/CPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standard electrical condition.(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No.11.1) Each 1307.07 1307.07 10.0 False None None False None False 13070.7 0 3804834 144487 None code66 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.- 15" Sweep (450 mm)(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.2.2) Each 4579.38 4579.38 2.0 False None None False None False 9158.76 0 3804835 144487 None code67 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVCinsulated twin core wire of approved make with wire meshand wooden frame.(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.13) Each 728.21 728.21 4.0 False None None False None False 2912.84 0 3804836 144487 None code68 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.3) Each 413.03 413.03 12.0 False None None False None False 4956.36 0 3804837 144487 None code69 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 100 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.4) Each 711.73 711.73 10.0 False None None False None False 7117.3 0 3804838 144487 None code70 Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10KandcompletewiringasrequiredconfirmingtoIEC60898. 6 - 32 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.4) Each 761.17 761.17 10.0 False None None False None False 7611.7 0 3804839 144487 None code71 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.6) Each 1135.06 1135.06 10.0 False None None False None False 11350.6 0 3804840 144487 None code72 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.7) Each 1768.51 1768.51 3.0 False None None False None False 5305.53 0 3804841 144487 None code73 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.18.9) Each 3180.64 3180.64 6.0 False None None False None False 19083.84 0 3804842 144487 None code74 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door -16 Way SP & N (CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.5) Each 3019.96 3019.96 3.0 False None None False None False 9059.88 0 3804843 144487 None code75 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door-12 Way SP & N(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.9) Each 2398.87 2398.87 2.0 False None None False None False 4797.74 0 3804844 144487 None code76 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.1) Each 4405.31 4405.31 1.0 False None None False None False 4405.31 0 3804845 144487 None code77 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.4) Each 4695.77 4695.77 1.0 False None None False None False 4695.77 0 3804846 144487 None code78 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.8) Each 5301.41 5301.41 1.0 False None None False None False 5301.41 0 3804847 144487 None code79 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.10) Each 5711.35 5711.35 1.0 False None None False None False 5711.35 0 3804848 144487 None code80 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall1-3 Way(CSR-KPWD - Electrical SR,2023-24: Page No.8, Item No. 3.4.2) Each 163.77 163.77 5.0 False None None False None False 818.85 0 3804849 144487 None code81 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-5 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.3) Each 182.31 182.31 5.0 False None None False None False 911.55 0 3804850 144487 None code82 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall6 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.4) Each 226.6 226.6 5.0 False None None False None False 1133.0 0 3804851 144487 None code83 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.5) Each 268.83 268.83 5.0 False None None False None False 1344.15 0 3804852 144487 None code84 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall10-12 Way (CSR-KPWD - Electrical SR, 2022-23: Page No.08, Item No. 3.4.6) Each 328.57 328.57 5.0 False None None False None False 1642.85 0 3804853 144487 None code85 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.7) Each 373.89 373.89 5.0 False None None False None False 1869.45 0 3804854 144487 None code86 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 3 Module(CSR-KPWD - Electrical SR,2023-24: Page No.08, Item No. 3.5.2) Each 165.83 165.83 5.0 False None None False None False 829.15 0 3804855 144487 None code87 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.3) Each 180.25 180.25 5.0 False None None False None False 901.25 0 3804856 144487 None code88 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.4) Each 241.02 241.02 5.0 False None None False None False 1205.1 0 3804857 144487 None code89 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 8 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.5) Each 292.52 292.52 5.0 False None None False None False 1462.6 0 3804858 144487 None code90 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box10-12 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.6) Each 354.32 354.32 5.0 False None None False None False 1771.6 0 3804859 144487 None code91 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 16 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.7) Each 408.91 408.91 5.0 False None None False None False 2044.55 0 3804860 144487 None code92 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch (CSR-KPWD - Electrical SR,2023-24: Page No.09, Item No. 3.6.1) Each 105.06 105.06 5.0 False None None False None False 525.3 0 3804861 144487 None code93 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.2) Each 170.98 170.98 5.0 False None None False None False 854.9 0 3804862 144487 None code94 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.3) Each 176.13 176.13 3.0 False None None False None False 528.39 0 3804863 144487 None code95 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.7) Each 185.4 185.4 5.0 False None None False None False 927.0 0 3804864 144487 None code96 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.10) Each 243.08 243.08 6.0 False None None False None False 1458.48 0 3804865 144487 None code97 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.9) Each 335.78 335.78 6.0 False None None False None False 2014.68 0 3804866 144487 None code98 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.1) Each 567.53 567.53 5.0 False None None False None False 2837.65 0 3804867 144487 None code99 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.2) Each 710.7 710.7 5.0 False None None False None False 3553.5 0 3804868 144487 None code100 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 36/40 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.3) Each 1307.07 1307.07 6.0 False None None False None False 7842.42 0 3804869 144487 None code101 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 5-6W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.1) Each 588.13 588.13 5.0 False None None False None False 2940.65 0 3804870 144487 None code102 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.2) Each 911.55 911.55 6.0 False None None False None False 5469.3 0 3804871 144487 None code103 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 15-18W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.3) Each 1363.72 1363.72 5.0 False None None False None False 6818.6 0 3804872 144487 None code104 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 2098.6 False None None False None False 523097.036 0 3804873 144487 None code105 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 173.89 False None None False None False 1072670.0263 0 3804874 144487 None code106 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other ppurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 200.64 False None None False None False 1290173.3856 0 3804875 144487 None code107 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 8792.13 8792.13 298.4 False None None False None False 2623571.592 0 3804876 144487 None code108 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 26.3347 False None None False None False 2143152.911151 0 3804877 144487 None code109 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3).(PWD SR 2023-24 Vol:3 P.NO.5 I.No.1.1A) Cum 139.05 139.05 2098.61 False None None False None False 291811.7205 0 3804878 144487 None code110 Clearing Grass and Removal of Rubbish & dumping to outside periphery by manual means.(PWD SR 2023-24 Vol:3 P.NO.9 I.No.2.3) 100 Sqm 381.1 381.1 29.0 False None None False None False 11051.9 0 3804879 144487 None code111 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including Cost of labour, tools, usage of machinery & other appurtenances required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.36 I.No.1.12) Cum 97.85 97.85 290.0 False None None False None False 28376.5 0 3804880 144487 None code112 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.33 I.No.1.8) Cum 488.22 488.22 290.0 False None None False None False 141583.8 0 3804881 144487 None code113 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m(PWD SR 2023-24 Vol:1 P.NO.37 I.No.1.14.1) Cum 105.06 105.06 116.1 False None None False None False 12197.466 0 3804882 144487 None code114 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.59 I.No.2.1.3) Cum 6168.67 6168.67 22.15 False None None False None False 136636.0405 0 3804883 144487 None code115 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(PWD SR 2023-24 Vol:2 P.NO.09 I.No.5.4) Cum 6580.67 6580.67 113.52 False None None False None False 747037.6584 0 3804884 144487 None code116 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge(PWD SR 2023-24 Vol:2 P.NO.44 I.No.8.19.1) Sqm 262.65 262.65 154.8 False None None False None False 40658.22 0 3804885 144487 None code117 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(PWD SR 2023-24 Vol:3 P.NO.26 I.No.4.17) Cum 2635.77 2635.77 21.3 False None None False None False 56141.901 0 3804886 144487 None code118 Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.73 I.No.2.4.1) Cum 6596.12 6596.12 5.6 False None None False None False 36938.272 0 3804887 144487 None code119 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size(PWD SR 2023-24 Vol:3 P.NO.73 I.No.8.42.3) m 476.89 476.89 280.0 False None None False None False 133529.2 0 3804888 144487 None code120 Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification)(PWD SR 2023-24 Vol:3 P.NO.51 I.No.6.8.2) Sqm 1195.83 1195.83 210.0 False None None False None False 251124.3 0 3804889 144487 None code121 Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(PWD SR 2023-24 Vol:3 P.NO.66 I.No.8.10) Sqm 112.27 112.27 98.0 False None None False None False 11002.46 0 1724663565000 0 None None Other Works Improvements of Roads & Drains in Haveri CMC under Amruth Nagarotthan Phase 4(296.73Lakhs) 25138759.79 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3855554 147426 None code01 Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.(PWD SR 2023-24 Vol:3 P.NO.09 I.No2.5ii(A) ) 100 Sqm 404.79 404.79 9.8 False None None False None False 3966.942 0 3855675 147426 None code01 Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.(PWD SR 2023-24 Vol:3 P.NO.09 I.No2.5ii(A) ) 100 Sqm 404.79 404.79 10.6 False None None False None False 4290.774 0 3855555 147426 None code02 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead(PWD SR 2023-24 Vol.3 P.NO.17 I.NO 3.5) Sqm 6.18 6.18 1102.5 False None None False None False 6813.45 0 3855676 147426 None code02 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead(PWD SR 2023-24 Vol.3 P.NO.17 I.NO 3.5) Sqm 6.18 6.18 1590.0 False None None False None False 9826.2 0 3855556 147426 None code03 Wet Mix Macadam (Plant Mix Method)-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(KPWD SR 2023-24, Vol 3, Pg.No.26, It.No.4.17) Cum 2635.77 2635.77 308.7 False None None False None False 813662.199 0 3855677 147426 None code03 Wet Mix Macadam (Plant Mix Method)-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(KPWD SR 2023-24, Vol 3, Pg.No.26, It.No.4.17) Cum 2635.77 2635.77 441.375 False None None False None False 1163362.98375 0 3855557 147426 None code04 Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.1-A) Sqm 42.23 42.23 1960.0 False None None False None False 82770.8 0 3855678 147426 None code04 Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.1-A) Sqm 42.23 42.23 2650.0 False None None False None False 111909.5 0 3855558 147426 None code05 Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.3-ii) Sqm 12.36 12.36 1960.0 False None None False None False 24225.6 0 3855679 147426 None code05 Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface (KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.3-ii) Sqm 14.42 14.42 2650.0 False None None False None False 38213.0 0 3855559 147426 None code06 Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(KPWD SR 2023-24 Vol.3 P.NO.32 I.NO 5.6A) Cum 7685.86 7685.86 98.0 False None None False None False 753214.28 0 3855680 147426 None code06 Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(KPWD SR 2023-24 Vol.3 P.NO.32 I.NO 5.6C) Cum 7685.86 7685.86 132.5 False None None False None False 1018376.45 0 3855560 147426 None code07 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. (PWD SR 2023-24 Vol.3 P.NO.43 I.NO 5.31) Cum 10456.56 10456.56 49.0 False None None False None False 512371.44 0 3855681 147426 None code07 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. (PWD SR 2023-24 Vol.3 P.NO.43 I.NO 5.31) Cum 10456.56 10456.56 66.25 False None None False None False 692747.1 0 3855561 147426 None code08 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per RC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(KPWD SR 2023-24, Vol 3, Pg.No.67, It.No.8.15) Sqm 545.9 545.9 98.0 False None None False None False 53498.2 0 3855682 147426 None code08 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per RC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(KPWD SR 2023-24, Vol 3, Pg.No.67, It.No.8.15) Sqm 545.9 545.9 106.0 False None None False None False 57865.4 0 3855562 147426 None code09 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804(KPWD SR 2023-24, Vol 3, Pg.No.78, It.No.8.54) Nos 9270.0 9270.0 1.0 False None None False None False 9270.0 0 3855683 147426 None code09 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804(KPWD SR 2023-24, Vol 3, Pg.No.78, It.No.8.54) Each 9270.0 9270.0 2.0 False None None False None False 18540.0 0 3855563 147426 None code10 Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover, curing, refilling with appurtenances complete.Upto 0.30m depth-(KPWD SR 2023-24, Vol 5, Pg.No.198, It.No.16.28.1) Nos 8414.07 8414.07 16.0 False None None False None False 134625.12 0 3855684 147426 None code10 Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover, curing, refilling with appurtenances complete.Upto 0.30m depth-(KPWD SR 2023-24, Vol 5, Pg.No.198, It.No.16.28.1) Nos 8414.07 8414.07 18.0 False None None False None False 151453.26 0 3855564 147426 None code11 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.17. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-24). Cum 7048.29 7048.29 2.5392 False None None False None False 17897.017968 0 3855685 147426 None code11 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 824.2 False None None False None False 205440.092 0 3855565 147426 None code12 For Centering & Shuttering @70%-Columns Cum 4933.8 4933.8 2.5392 False None None False None False 12527.90496 0 3855686 147426 None code12 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 80.98 False None None False None False 499538.8966 0 3855566 147426 None code13 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.17. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-24.) Cum 7048.29 7048.29 3.192 False None None False None False 22498.14168 0 3855687 147426 None code13 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other ppurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 91.47 False None None False None False 588178.6263 0 3855567 147426 None code14 For Centering & Shuttering @60%-Ground Floor - Lintel Side Cum 4228.97 4228.97 3.192 False None None False None False 13498.87224 0 3855688 147426 None code14 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 6512.69 6512.69 121.28 False None None False None False 789859.0432 0 3855568 147426 None code15 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.17. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-24). Cum 7048.29 7048.29 8.3655 False None None False None False 58962.469995 0 3855689 147426 None code15 For Centering & Shuttering @35% Cum 2279.44 2279.44 121.28 False None None False None False 276450.4832 0 3855569 147426 None code16 For Centering & Shuttering @50%-Ground Floor Slab Cum 3524.15 3524.15 8.3655 False None None False None False 29481.276825 0 3855690 147426 None code16 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 11.0311 False None None False None False 897725.589363 0 3855570 147426 None code17 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.17. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-24) Cum 7048.29 7048.29 0.432 False None None False None False 3044.86128 0 3855691 147426 None code17 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3).(PWD SR 2023-24 Vol:3 P.NO.5 I.No.1.1A) Cum 139.05 139.05 824.2 False None None False None False 114605.01 0 3855571 147426 None code18 For Centering & Shuttering @45%-Groun Floor -Chejja Cum 3171.73 3171.73 0.432 False None None False None False 1370.18736 0 3855692 147426 None code18 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size(PWD SR 2023-24 Vol:3 P.NO.73 I.No.8.42.3) m 476.89 476.89 390.0 False None None False None False 185987.1 0 3855572 147426 None code19 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification-Buildings (KPWD 2023-24 Page No.18.Vol-1 I.no.2.11A ) Kg 92140.71 92140.71 1.8754 False None None False None False 172800.687534 0 3855693 147426 None code19 Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification)(PWD SR 2023-24 Vol:3 P.NO.51 I.No.6.8.2) Sqm 1195.83 1195.83 292.5 False None None False None False 349780.275 0 3855573 147426 None code20 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(KPWD 2023-24 Page No.17.Vol-2 I.no.6.32 ) Sqm 1349.3 1349.3 75.93 False None None False None False 102452.349 0 3855694 147426 None code20 Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(PWD SR 2023-24 Vol:3 P.NO.66 I.No.8.10) Sqm 112.27 112.27 136.5 False None None False None False 15324.855 0 3855574 147426 None code21 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.41.Vol-2 I.no.8.4.2) Sqm 321.36 321.36 131.7 False None None False None False 42323.112 0 3855695 147426 None code21 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical pecifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.(KPWD 2023-24 Page No.27.Vol-1 I.no.1.1) Cum 93.73 93.73 275.5 False None None False None False 25822.615 0 3855575 147426 None code22 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.42.Vol-2 I.no.8.5.2) Sqm 359.47 359.47 92.84 False None None False None False 33373.1948 0 3855696 147426 None code22 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m(Page No.08. Iitem no.1.14.1 of Vol-1-CSR-KPWD 2023-24) Cum 105.06 105.06 52.452 False None None False None False 5510.60712 0 3855576 147426 None code23 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.(KPWD 2023-24 Page No.63.Vol-2 I.no.9.24) Sqm 2937.56 2937.56 43.8 False None None False None False 128665.128 0 3855697 147426 None code23 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In ordinary/soft rock without blasting upto 1.5 m depth(Page No.08. Iitem no.1.15.1 of Vol-1-CSR-KPWD 2023-2024) Cum 373.89 373.89 13.113 False None None False None False 4902.81957 0 3855577 147426 None code24 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile)(KPWD 2023-24 Page No.60.Vol-2 I.no.9.7.2) Sqm 1297.8 1297.8 87.6 False None None False None False 113687.28 0 3855698 147426 None code24 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Page No.34. Iitem no.1.9 of Vol-1-CSR-KPWD 2023-2024) Cum 273.98 273.98 57.599 False None None False None False 15780.97402 0 3855578 147426 None code25 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.45.Vol-2 I.no.8.29) Sqm 291.49 291.49 92.84 False None None False None False 27061.9316 0 3855699 147426 None code25 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.1.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6168.67 6168.67 39.0145 False None None False None False 240667.575715 0 3855579 147426 None code26 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(KPWD 2023-24 Page No.50.Vol-2 I.no.8.51) Sqm 103.0 103.0 131.7 False None None False None False 13565.1 0 3855700 147426 None code26 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(Page No.09. Iitem no.5.4 of Vol-2-CSR-KPWD 2023-2024) Cum 6580.67 6580.67 23.565 False None None False None False 155073.48855 0 3855580 147426 None code27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.48.Vol-2 I.no.8.39) Sqm 130.81 130.81 131.7 False None None False None False 17227.677 0 3855701 147426 None code27 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 24.0 False None None False None False 156625.92 0 3855581 147426 None code28 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(KPWD 2023-24 Page No.99.Vol-2 I.no-12.11) Cum 142216.22 142216.22 0.0772 False None None False None False 10979.092184 0 3855702 147426 None code28 For Centering & Shuttering @8% Cum 522.09 522.09 24.0 False None None False None False 12530.16 0 3855582 147426 None code29 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(KPWD 2023-24 Page No.105.Vol-2 I.no-12.57.1) Sqm 4164.29 4164.29 4.2 False None None False None False 17490.018 0 3855703 147426 None code29 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 2.6879 False None None False None False 17541.450432 0 3855583 147426 None code30 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x40x2.5 mm (ordinary type)(KPWD 2023-24 Page No.107.Vol-2 I.no-12.75.6) Nos 105.06 105.06 3.0 False None None False None False 315.18 0 3855704 147426 None code30 For Centering & Shuttering @5% Cum 326.3 326.3 2.6879 False None None False None False 877.06177 0 3855584 147426 None code31 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.2) Each 360.5 360.5 3.0 False None None False None False 1081.5 0 3855705 147426 None code31 Providing and laying in cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.3.2 of Vol-1-CSR-KPWD 2023-2024) Cum 6674.4 6674.4 22.4887 False None None False None False 150098.57928 0 3855585 147426 None code32 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.4) Each 202.91 202.91 3.0 False None None False None False 608.73 0 3855706 147426 None code32 For Centering & Shuttering @50% Cum 3337.2 3337.2 22.4887 False None None False None False 75049.28964 0 3855586 147426 None code33 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.61) Nos 1019.7 1019.7 1.0 False None None False None False 1019.7 0 3855707 147426 None code33 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 2.6999 False None None False None False 17619.763392 0 3855587 147426 None code34 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.60) Nos 1083.56 1083.56 1.0 False None None False None False 1083.56 0 3855708 147426 None code34 For Centering & Shuttering @70% Cum 4568.26 4568.26 2.699 False None None False None False 12329.73374 0 3855588 147426 None code35 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.62) Nos 244.11 244.11 1.0 False None None False None False 244.11 0 3855709 147426 None code35 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 16.2 False None None False None False 114182.298 0 3855589 147426 None code36 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.59) Nos 1147.42 1147.42 1.0 False None None False None False 1147.42 0 3855710 147426 None code36 For Centering & Shuttering @70% Cum 4933.8 4933.8 16.2 False None None False None False 79927.56 0 3855590 147426 None code37 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.58) Nos 123.6 123.6 1.0 False None None False None False 123.6 0 3855711 147426 None code37 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 22.4459 False None None False None False 158205.212511 0 3855591 147426 None code38 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(KPWD 2023-24 Page No.104.Vol-2 I.no-12.51) Nos 1046.48 1046.48 1.0 False None None False None False 1046.48 0 3855712 147426 None code38 For Centering & Shuttering @60% Cum 4228.97 4228.97 22.4459 False None None False None False 94923.037723 0 3855592 147426 None code39 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(KPWD 2023-24 Page No.86.Vol-2 I.no-11.34A) Kg 173.04 173.04 136.0799 False None None False None False 23547.265896 0 3855713 147426 None code39 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 45.9975 False None None False None False 324203.719275 0 3855593 147426 None code40 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.110.Vol-2 I.no-12.90) Sqm 6936.02 6936.02 7.1999 False None None False None False 49938.650398 0 3855714 147426 None code40 For Centering & Shuttering @50% Cum 3524.15 3524.15 45.9975 False None None False None False 162102.089625 0 3855594 147426 None code41 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.109.Vol-2 I.no-12.85) Sqm 5890.57 5890.57 0.36 False None None False None False 2120.6052 0 3855715 147426 None code41 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 6.1537 False None None False None False 43373.062173 0 3855595 147426 None code42 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.47.Vol-2 I.no-8.34.2) Sqm 59.74 59.74 4.2 False None None False None False 250.908 0 3855716 147426 None code42 For Centering & Shuttering @45% Cum 3171.73 3171.73 6.1537 False None None False None False 19517.874901 0 3855596 147426 None code43 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.46.Vol-2 I.no-8.33.2) Sqm 142.14 142.14 4.2 False None None False None False 596.988 0 3855717 147426 None code43 Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification. (The laps and wastages shall not be measured separately)(Page No.18. Iitem no.2.11a of Vol-1-CSR-KPWD 2023-2024) Tonne 92140.71 92140.71 10.5523 False None None False None False 972296.414133 0 3855597 147426 None code44 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.48.Vol-2 I.no-8.37) Sqm 134.93 134.93 7.56 False None None False None False 1020.0708 0 3855718 147426 None code44 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(KPWD 2023-24 Page No.17.Vol-2 I.no.6.32 ) Sqm 1349.3 1349.3 125.8199 False None None False None False 169768.79107 0 3855598 147426 None code45 Open Conduit System SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructureorrawlplugsincaseofbrickwallsandcementplasteringthedamagedportionusingheavygauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.1.1) m 71.07 71.07 118.0 False None None False None False 8386.26 0 3855719 147426 None code45 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications(KPWD 2023-24 Page No.17.Vol-2 I.no.6.33 ) Sqm 1267.93 1267.93 43.44 False None None False None False 55078.8792 0 3855599 147426 None code46 Open Conduit System SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructureorrawlplugsincaseofbrickwallsandcementplasteringthedamagedportionusingheavygauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.1.2) m 83.43 83.43 120.0 False None None False None False 10011.6 0 3855720 147426 None code46 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.41.Vol-2 I.no.8.4.2) Sqm 321.36 321.36 394.07 False None None False None False 126638.3352 0 3855600 147426 None code47 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.1) m 70.04 70.04 100.0 False None None False None False 7004.0 0 3855721 147426 None code47 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.42.Vol-2 I.no.8.5.2) Sqm 359.47 359.47 164.309 False None None False None False 59064.15623 0 3855601 147426 None code48 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.25 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.2) m 81.37 81.37 90.0 False None None False None False 7323.3 0 3855722 147426 None code48 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm(KPWD 2023-24 Page No.60.Vol-2 I.no.9.12.2) Sqm 1179.35 1179.35 160.0 False None None False None False 188696.0 0 3855602 147426 None code49 Concealed Conduit System SupplyingheavygaugePVCconduitpipe......mmdia..........mmthickconfirmingtoIS2509withsuitablesizebends,metal/PVCJunctionboxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab.TheconduitshouldbetiedtothereinforcementrodsbyusingbindingwiresandunusedwaysofjunctionboxesandpipeendsshouldbecoveredusingPVCendenclosures,runwith18SWGGIfishwirewherever necessary.32 mm dia 2.5 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.01, Item No. 1.2.3) m 106.09 106.09 110.0 False None None False None False 11669.9 0 3855723 147426 None code49 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile)(KPWD 2023-24 Page No.60.Vol-2 I.no.9.7.2) Sqm 1297.8 1297.8 160.0 False None None False None False 207648.0 0 3855603 147426 None code50 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.32 mm dia 2.5 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.01, Item No. 1.3.3) m 101.97 101.97 70.0 False None None False None False 7137.9 0 3855724 147426 None code50 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.(KPWD 2023-24 Page No.64.Vol-2 I.no.9.30) Sqm 5487.84 5487.84 3.45 False None None False None False 18933.048 0 3855604 147426 None code51 Supplying.........Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM.S.flatframeworkinexistingpanelboard.ThebusbarshallhavesuitableholesforterminationofincomingandoutgoingcablesasperISspecification with necessary bolts, nuts and washers etc., complete250 A 4 x 30 x 10 mm Aluminium Strips(CSR-KPWD - Electrical SR, 2023-24: Page No.20, Item No. 5.40.2) m 3538.05 3538.05 15.0 False None None False None False 53070.75 0 3855725 147426 None code51 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.(KPWD 2023-24 Page No.60.Vol-2 I.no.9.9) Sqm 1108.28 1108.28 10.08 False None None False None False 11171.4624 0 3855605 147426 None code52 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.1) Point 293.55 293.55 74.0 False None None False None False 21722.7 0 3855726 147426 None code52 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.45.Vol-2 I.no.8.29) Sqm 291.49 291.49 164.309 False None None False None False 47894.43041 0 3855606 147426 None code53 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.edium point above 3m upto 6m from tapping point to out let via switch.(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.2) Point 405.82 405.82 45.0 False None None False None False 18261.9 0 3855727 147426 None code53 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(KPWD 2023-24 Page No.50.Vol-2 I.no.8.51) Sqm 103.0 103.0 394.07 False None None False None False 40589.21 0 3855607 147426 None code54 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.3) Point 587.1 587.1 42.0 False None None False None False 24658.2 0 3855728 147426 None code54 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.48.Vol-2 I.no.8.39) Sqm 130.81 130.81 394.07 False None None False None False 51548.2967 0 3855608 147426 None code55 Supplying6Aflushtypesocketand6AflushtypeSPswitcheithersurface/flushmountinginexistinggangboxorin4mmthickplasticsheetandfixingoveraflushmountedwoodenboxandwiringusingnecessary capacity wires as required as per IS 1293 and IS 3854 6 Amps 3/5 way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.1.2) Each 151.41 151.41 30.0 False None None False None False 4542.3 0 3855729 147426 None code55 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(KPWD 2023-24 Page No.99.Vol-2 I.no-12.11) Cum 142216.22 142216.22 0.3068 False None None False None False 43631.936296 0 3855609 147426 None code56 Supplyingandmounting2Nos.of2Way6Aflushtypeswitcheseithersurface/flushmountedonexistinggangboxorin4mmthickplasticsheetandmountedonaflushmountedwoodenboxandwiringas per IS 3854(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.2) Each 175.1 175.1 14.0 False None None False None False 2451.4 0 3855730 147426 None code56 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(KPWD 2023-24 Page No.105.Vol-2 I.no-12.57.1) Sqm 4164.29 4164.29 12.18 False None None False None False 50721.0522 0 3855610 147426 None code57 Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 1 mm2(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.1) m 19.57 19.57 352.0 False None None False None False 6888.64 0 3855731 147426 None code57 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x40x2.5 mm (ordinary type)(KPWD 2023-24 Page No.107.Vol-2 I.no-12.75.6) Nos 105.06 105.06 15.0 False None None False None False 1575.9 0 3855611 147426 None code58 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 2.5 mm2 (CSR-KPWD - Electrical SR,2023-24: Page No.05, Item No. 2.3.3) m 43.26 43.26 68.0 False None None False None False 2941.68 0 3855732 147426 None code58 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.2) Each 360.5 360.5 15.0 False None None False None False 5407.5 0 3855612 147426 None code59 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 4.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.4) m 64.89 64.89 800.0 False None None False None False 51912.0 0 3855733 147426 None code59 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.4) Each 202.91 202.91 15.0 False None None False None False 3043.65 0 3855613 147426 None code60 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 10.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.03, Item No. 2.3.6) m 172.01 172.01 60.0 False None None False None False 10320.6 0 3855734 147426 None code60 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.61) Each 1019.7 1019.7 5.0 False None None False None False 5098.5 0 3855614 147426 None code61 Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball bearing system.48" Sweep (1200 mm) Regular model(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.3.1) Each 3073.52 3073.52 4.0 False None None False None False 12294.08 0 3855735 147426 None code61 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.60) Nos 1083.56 1083.56 5.0 False None None False None False 5417.8 0 3855615 147426 None code62 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to theexistingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 / 0.0076 inch PVC insulated twintwisted copper wire and wiring(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.10) No 176.13 176.13 8.0 False None None False None False 1409.04 0 3855736 147426 None code62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.62) Nos 244.11 244.11 5.0 False None None False None False 1220.55 0 3855616 147426 None code63 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.-6A Pendant Holder(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.6) No 73.13 73.13 15.0 False None None False None False 1096.95 0 3855737 147426 None code63 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.59) Nos 1147.42 1147.42 5.0 False None None False None False 5737.1 0 3855617 147426 None code64 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.- 6A Bakelite Ceiling Rose(CSR-KPWD - Electrical SR, 2023-24: Page No10, Item No. 3.14.5) No 80.34 80.34 10.0 False None None False None False 803.4 0 3855738 147426 None code64 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.58) Nos 123.6 123.6 5.0 False None None False None False 618.0 0 3855618 147426 None code65 Supplying of recess mounting non integrated type LED down light15-18W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceilingclA, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread,life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF 0.95, power lossshould 5% of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20%,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABL/CPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standard electrical condition.(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No.11.1) Each 1307.07 1307.07 10.0 False None None False None False 13070.7 0 3855739 147426 None code65 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(KPWD 2023-24 Page No.104.Vol-2 I.no-12.51) Nos 1046.48 1046.48 1.0 False None None False None False 1046.48 0 3855619 147426 None code66 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.- 15" Sweep (450 mm)(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.2.2) Each 4579.38 4579.38 2.0 False None None False None False 9158.76 0 3855740 147426 None code66 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(KPWD 2023-24 Page No.86.Vol-2 I.no-11.34A) Kg 173.04 173.04 330.48 False None None False None False 57186.2592 0 3855620 147426 None code67 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVCinsulated twin core wire of approved make with wire meshand wooden frame.(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.13) Each 728.21 728.21 4.0 False None None False None False 2912.84 0 3855741 147426 None code67 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.110.Vol-2 I.no-12.90) Sqm 6936.02 6936.02 18.0 False None None False None False 124848.36 0 3855621 147426 None code68 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.3) Each 413.03 413.03 12.0 False None None False None False 4956.36 0 3855742 147426 None code68 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.109.Vol-2 I.no-12.85) Sqm 5890.57 5890.57 0.36 False None None False None False 2120.6052 0 3855622 147426 None code69 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 100 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.4) Each 711.73 711.73 10.0 False None None False None False 7117.3 0 3855743 147426 None code69 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.47.Vol-2 I.no-8.34.2) Sqm 59.74 59.74 12.18 False None None False None False 727.6332 0 3855623 147426 None code70 Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10KandcompletewiringasrequiredconfirmingtoIEC60898. 6 - 32 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.4) Each 761.17 761.17 10.0 False None None False None False 7611.7 0 3855744 147426 None code70 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.46.Vol-2 I.no-8.33.2) Sqm 142.14 142.14 9.45 False None None False None False 1343.223 0 3855624 147426 None code71 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.6) Each 1135.06 1135.06 10.0 False None None False None False 11350.6 0 3855745 147426 None code71 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.48.Vol-2 I.no-8.37) Sqm 134.93 134.93 18.36 False None None False None False 2477.3148 0 3855625 147426 None code72 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.7) Each 1768.51 1768.51 3.0 False None None False None False 5305.53 0 3855746 147426 None code72 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as(KPWD 2023-24 Page No.85.Vol-2 I.no-11.28) Kg 581.95 581.95 75.0 False None None False None False 43646.25 0 3855626 147426 None code73 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.18.9) Each 3180.64 3180.64 6.0 False None None False None False 19083.84 0 3855747 147426 None code73 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in-Charge(Page No.84. Iitem no.11.26.1 of Vol-2-CSR-KPWD 2023-24) Kg 142.14 142.14 155.399 False None None False None False 22088.41386 0 3855627 147426 None code74 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door -16 Way SP & N (CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.5) Each 3019.96 3019.96 3.0 False None None False None False 9059.88 0 3855748 147426 None code74 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3).(PWD SR 2023-24 Vol:3 P.NO.5 I.No.1.1A) Cum 139.05 139.05 341.065 False None None False None False 47425.08825 0 3855628 147426 None code75 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door-12 Way SP & N(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.9) Each 2398.87 2398.87 2.0 False None None False None False 4797.74 0 3855749 147426 None code75 Open Conduit System SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructureorrawlplugsincaseofbrickwallsandcementplasteringthedamagedportionusingheavygauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.1.1) m 71.07 71.07 50.0 False None None False None False 3553.5 0 3855629 147426 None code76 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.1) Each 4405.31 4405.31 1.0 False None None False None False 4405.31 0 3855750 147426 None code76 Open Conduit System SupplyingheavygaugePVCconduitpipe.......dia.......mmthickconfirmingtoIS2509withsuitablesizebends,junctionboxes,adhesivepasteetc,andfixingusinginvertedwoodplugsincaseofRCCceilingandRCCwall/stonestructureorrawlplugsincaseofbrickwallsandcementplasteringthedamagedportionusingheavygauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.1.2) m 83.43 83.43 50.0 False None None False None False 4171.5 0 3855630 147426 None code77 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.4) Each 4695.77 4695.77 1.0 False None None False None False 4695.77 0 3855751 147426 None code77 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.1) m 70.04 70.04 50.0 False None None False None False 3502.0 0 3855631 147426 None code78 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.8) Each 5301.41 5301.41 1.0 False None None False None False 5301.41 0 3855752 147426 None code78 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.25 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.2) m 81.37 81.37 50.0 False None None False None False 4068.5 0 3855632 147426 None code79 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.10) Each 5711.35 5711.35 1.0 False None None False None False 5711.35 0 3855753 147426 None code79 Concealed Conduit System SupplyingheavygaugePVCconduitpipe......mmdia..........mmthickconfirmingtoIS2509withsuitablesizebends,metal/PVCJunctionboxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab.TheconduitshouldbetiedtothereinforcementrodsbyusingbindingwiresandunusedwaysofjunctionboxesandpipeendsshouldbecoveredusingPVCendenclosures,runwith18SWGGIfishwirewherever necessary.32 mm dia 2.5 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.01, Item No. 1.2.3) m 106.09 106.09 50.0 False None None False None False 5304.5 0 3855633 147426 None code80 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall1-3 Way(CSR-KPWD - Electrical SR,2023-24: Page No.8, Item No. 3.4.2) Each 163.77 163.77 5.0 False None None False None False 818.85 0 3855754 147426 None code80 SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwith18SWGGIfishwire run throughout the conduit wherever necessary.32 mm dia 2.5 mm thick(CSR-KPWD - Electrical SR, 2023-24: Page No.01, Item No. 1.3.3) m 101.97 101.97 50.0 False None None False None False 5098.5 0 3855634 147426 None code81 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-5 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.3) Each 182.31 182.31 5.0 False None None False None False 911.55 0 3855755 147426 None code81 Supplying.........Arated3phasewithneutralbusbarusingrequiredcapacityelectrolyticaluminiumstripscoveredwithheatshrinkablecolouredPVCsleeve,mountedonphenolic/FRP/DMCinsulatorwhicharemountedonpowdercoated40x6mmM.S.flatframeworkinexistingpanelboard.ThebusbarshallhavesuitableholesforterminationofincomingandoutgoingcablesasperISspecification with necessary bolts, nuts and washers etc., complete250 A 4 x 30 x 10 mm Aluminium Strips(CSR-KPWD - Electrical SR, 2023-24: Page No.20, Item No. 5.40.2) m 3538.05 3538.05 15.0 False None None False None False 53070.75 0 3855635 147426 None code82 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall6 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.4) Each 226.6 226.6 5.0 False None None False None False 1133.0 0 3855756 147426 None code82 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.1) Point 293.55 293.55 40.0 False None None False None False 11742.0 0 3855636 147426 None code83 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.5) Each 268.83 268.83 5.0 False None None False None False 1344.15 0 3855757 147426 None code83 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.edium point above 3m upto 6m from tapping point to out let via switch.(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.2) Point 405.82 405.82 20.0 False None None False None False 8116.4 0 3855637 147426 None code84 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall10-12 Way (CSR-KPWD - Electrical SR, 2022-23: Page No.08, Item No. 3.4.6) Each 328.57 328.57 5.0 False None None False None False 1642.85 0 3855758 147426 None code84 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.3) Point 587.1 587.1 20.0 False None None False None False 11742.0 0 3855638 147426 None code85 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.7) Each 373.89 373.89 5.0 False None None False None False 1869.45 0 3855759 147426 None code85 Supplying6Aflushtypesocketand6AflushtypeSPswitcheithersurface/flushmountinginexistinggangboxorin4mmthickplasticsheetandfixingoveraflushmountedwoodenboxandwiringusingnecessary capacity wires as required as per IS 1293 and IS 3854 6 Amps 3/5 way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.1.2) Each 151.41 151.41 20.0 False None None False None False 3028.2 0 3855639 147426 None code86 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 3 Module(CSR-KPWD - Electrical SR,2023-24: Page No.08, Item No. 3.5.2) Each 165.83 165.83 5.0 False None None False None False 829.15 0 3855760 147426 None code86 Supplyingandmounting2Nos.of2Way6Aflushtypeswitcheseithersurface/flushmountedonexistinggangboxorin4mmthickplasticsheetandmountedonaflushmountedwoodenboxandwiringas per IS 3854(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.2) Each 175.1 175.1 15.0 False None None False None False 2626.5 0 3855640 147426 None code87 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.3) Each 180.25 180.25 5.0 False None None False None False 901.25 0 3855761 147426 None code87 Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 1 mm2(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.1) m 19.57 19.57 50.0 False None None False None False 978.5 0 3855641 147426 None code88 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.4) Each 241.02 241.02 5.0 False None None False None False 1205.1 0 3855762 147426 None code88 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 2.5 mm2 (CSR-KPWD - Electrical SR,2023-24: Page No.05, Item No. 2.3.3) m 43.26 43.26 80.0 False None None False None False 3460.8 0 3855642 147426 None code89 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 8 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.5) Each 292.52 292.52 5.0 False None None False None False 1462.6 0 3855763 147426 None code89 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 4.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.4) m 64.89 64.89 30.0 False None None False None False 1946.7 0 3855643 147426 None code90 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box10-12 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.6) Each 354.32 354.32 5.0 False None None False None False 1771.6 0 3855764 147426 None code90 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 10.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.03, Item No. 2.3.6) m 172.01 172.01 14.0 False None None False None False 2408.14 0 3855644 147426 None code91 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 16 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.7) Each 408.91 408.91 5.0 False None None False None False 2044.55 0 3855765 147426 None code91 Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball bearing system.48" Sweep (1200 mm) Regular model(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.3.1) Each 3073.52 3073.52 3.0 False None None False None False 9220.56 0 3855645 147426 None code92 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch (CSR-KPWD - Electrical SR,2023-24: Page No.09, Item No. 3.6.1) Each 105.06 105.06 5.0 False None None False None False 525.3 0 3855766 147426 None code92 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to theexistingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 / 0.0076 inch PVC insulated twintwisted copper wire and wiring(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.10) Nos 176.13 176.13 3.0 False None None False None False 528.39 0 3855646 147426 None code93 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.2) Each 170.98 170.98 5.0 False None None False None False 854.9 0 3855767 147426 None code93 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.-6A Pendant Holder(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.6) Nos 73.13 73.13 10.0 False None None False None False 731.3 0 3855647 147426 None code94 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.3) Each 176.13 176.13 3.0 False None None False None False 528.39 0 3855768 147426 None code94 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.- 6A Bakelite Ceiling Rose(CSR-KPWD - Electrical SR, 2023-24: Page No10, Item No. 3.14.5) Nos 80.34 80.34 6.0 False None None False None False 482.04 0 3855648 147426 None code95 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.7) Each 185.4 185.4 5.0 False None None False None False 927.0 0 3855769 147426 None code95 Supplying of recess mounting non integrated type LED down light15-18W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceilingclA, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread,life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF 0.95, power lossshould 5% of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20%,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABL/CPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standard electrical condition.(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No.11.1) Each 1721.1 1721.1 4.0 False None None False None False 6884.4 0 3855649 147426 None code96 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.10) Each 243.08 243.08 6.0 False None None False None False 1458.48 0 3855770 147426 None code96 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.- 15" Sweep (450 mm)(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.2.2) Each 4579.38 4579.38 2.0 False None None False None False 9158.76 0 3855650 147426 None code97 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.9) Each 335.78 335.78 6.0 False None None False None False 2014.68 0 3855771 147426 None code97 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVCinsulated twin core wire of approved make with wire meshand wooden frame.(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.13) Each 728.21 728.21 3.0 False None None False None False 2184.63 0 3855651 147426 None code98 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.1) Each 567.53 567.53 5.0 False None None False None False 2837.65 0 3855772 147426 None code98 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.3) Each 413.03 413.03 3.0 False None None False None False 1239.09 0 3855652 147426 None code99 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.2) Each 710.7 710.7 5.0 False None None False None False 3553.5 0 3855773 147426 None code99 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 100 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.4) Each 711.73 711.73 3.0 False None None False None False 2135.19 0 3855653 147426 None code100 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 36/40 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.3) Each 1307.07 1307.07 6.0 False None None False None False 7842.42 0 3855774 147426 None code100 Supplying&fixingminiaturecircuitbreakersonexistingMCBdistributionboardsusingnecessaryfixingmaterialsand'C'Typecurve,indicatorON/OFF,energycross-3withShortcircuitbreakingcapacityof10KandcompletewiringasrequiredconfirmingtoIEC60898. 6 - 32 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.4) Each 761.17 761.17 8.0 False None None False None False 6089.36 0 3855654 147426 None code101 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 5-6W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.1) Each 588.13 588.13 5.0 False None None False None False 2940.65 0 3855775 147426 None code101 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.6) Each 1135.06 1135.06 8.0 False None None False None False 9080.48 0 3855655 147426 None code102 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.2) Each 911.55 911.55 6.0 False None None False None False 5469.3 0 3855776 147426 None code102 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.7) Each 1768.51 1768.51 5.0 False None None False None False 8842.55 0 3855656 147426 None code103 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 15-18W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.3) Each 1363.72 1363.72 5.0 False None None False None False 6818.6 0 3855777 147426 None code103 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.18.9) Each 3180.64 3180.64 8.0 False None None False None False 25445.12 0 3855657 147426 None code104 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 2098.6 False None None False None False 523097.036 0 3855778 147426 None code104 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door -16 Way SP & N (CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.5) Each 3019.96 3019.96 4.0 False None None False None False 12079.84 0 3855658 147426 None code105 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 173.89 False None None False None False 1072670.0263 0 3855779 147426 None code105 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door-12 Way SP & N(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.9) Each 2398.87 2398.87 2.0 False None None False None False 4797.74 0 3855659 147426 None code106 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other ppurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 200.64 False None None False None False 1290173.3856 0 3855780 147426 None code106 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.1) Each 4405.31 4405.31 1.0 False None None False None False 4405.31 0 3855660 147426 None code107 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 8792.13 8792.13 298.4 False None None False None False 2623571.592 0 3855781 147426 None code107 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.4) Each 4695.77 4695.77 1.0 False None None False None False 4695.77 0 3855661 147426 None code108 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 26.3347 False None None False None False 2143152.911151 0 3855782 147426 None code108 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.8) Each 5301.41 5301.41 1.0 False None None False None False 5301.41 0 3855662 147426 None code109 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3).(PWD SR 2023-24 Vol:3 P.NO.5 I.No.1.1A) Cum 139.05 139.05 2098.61 False None None False None False 291811.7205 0 3855783 147426 None code109 Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.10) Each 5711.35 5711.35 1.0 False None None False None False 5711.35 0 3855663 147426 None code110 Clearing Grass and Removal of Rubbish & dumping to outside periphery by manual means.(PWD SR 2023-24 Vol:3 P.NO.9 I.No.2.3) 100 Sqm 381.1 381.1 29.0 False None None False None False 11051.9 0 3855784 147426 None code110 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall1-3 Way(CSR-KPWD - Electrical SR,2023-24: Page No.8, Item No. 3.4.2) Each 163.77 163.77 6.0 False None None False None False 982.62 0 3855664 147426 None code111 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including Cost of labour, tools, usage of machinery & other appurtenances required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.36 I.No.1.12) Cum 97.85 97.85 290.0 False None None False None False 28376.5 0 3855785 147426 None code111 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-5 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.3) Each 182.31 182.31 6.0 False None None False None False 1093.86 0 3855665 147426 None code112 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage & all other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.33 I.No.1.8) Cum 488.22 488.22 290.0 False None None False None False 141583.8 0 3855786 147426 None code112 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall6 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.4) Each 226.6 226.6 6.0 False None None False None False 1359.6 0 3855666 147426 None code113 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m(PWD SR 2023-24 Vol:1 P.NO.37 I.No.1.14.1) Cum 105.06 105.06 116.1 False None None False None False 12197.466 0 3855787 147426 None code113 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.5) Each 268.83 268.83 5.0 False None None False None False 1344.15 0 3855667 147426 None code114 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.59 I.No.2.1.3) Cum 6168.67 6168.67 22.15 False None None False None False 136636.0405 0 3855788 147426 None code114 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall10-12 Way (CSR-KPWD - Electrical SR, 2022-23: Page No.08, Item No. 3.4.6) Each 328.57 328.57 5.0 False None None False None False 1642.85 0 3855668 147426 None code115 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(PWD SR 2023-24 Vol:2 P.NO.09 I.No.5.4) Cum 6580.67 6580.67 113.52 False None None False None False 747037.6584 0 3855789 147426 None code115 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.7) Each 373.89 373.89 3.0 False None None False None False 1121.67 0 3855669 147426 None code116 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge(PWD SR 2023-24 Vol:2 P.NO.44 I.No.8.19.1) Sqm 262.65 262.65 154.8 False None None False None False 40658.22 0 3855790 147426 None code116 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 3 Module(CSR-KPWD - Electrical SR,2023-24: Page No.08, Item No. 3.5.2) Each 165.83 165.83 6.0 False None None False None False 994.98 0 3855670 147426 None code117 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(PWD SR 2023-24 Vol:3 P.NO.26 I.No.4.17) Cum 2635.77 2635.77 21.3 False None None False None False 56141.901 0 3855791 147426 None code117 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 4 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.3) Each 180.25 180.25 6.0 False None None False None False 1081.5 0 3855671 147426 None code118 Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.73 I.No.2.4.1) Cum 6596.12 6596.12 5.6 False None None False None False 36938.272 0 3855792 147426 None code118 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.4) Each 241.02 241.02 6.0 False None None False None False 1446.12 0 3855672 147426 None code119 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 600 x 300 x 150 mm size(PWD SR 2023-24 Vol:3 P.NO.73 I.No.8.42.3) m 476.89 476.89 280.0 False None None False None False 133529.2 0 3855793 147426 None code119 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 8 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.5) Each 292.52 292.52 5.0 False None None False None False 1462.6 0 3855673 147426 None code120 Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification)(PWD SR 2023-24 Vol:3 P.NO.51 I.No.6.8.2) Sqm 1195.83 1195.83 210.0 False None None False None False 251124.3 0 3855794 147426 None code120 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box10-12 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.6) Each 354.32 354.32 5.0 False None None False None False 1771.6 0 3855674 147426 None code121 Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(PWD SR 2023-24 Vol:3 P.NO.66 I.No.8.10) Sqm 112.27 112.27 98.0 False None None False None False 11002.46 0 3855795 147426 None code121 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 16 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.7) Each 408.91 408.91 5.0 False None None False None False 2044.55 0 3855796 147426 None code122 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch (CSR-KPWD - Electrical SR,2023-24: Page No.09, Item No. 3.6.1) Each 105.06 105.06 10.0 False None None False None False 1050.6 0 3855797 147426 None code123 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.2) Each 170.98 170.98 10.0 False None None False None False 1709.8 0 3855798 147426 None code124 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.3) Each 176.13 176.13 3.0 False None None False None False 528.39 0 3855799 147426 None code125 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.7) Each 185.4 185.4 6.0 False None None False None False 1112.4 0 3855800 147426 None code126 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.10) Each 243.08 243.08 6.0 False None None False None False 1458.48 0 3855801 147426 None code127 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.9) Each 335.78 335.78 6.0 False None None False None False 2014.68 0 3855802 147426 None code128 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.1) Each 567.53 567.53 8.0 False None None False None False 4540.24 0 3855803 147426 None code129 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.2) Each 710.7 710.7 8.0 False None None False None False 5685.6 0 3855804 147426 None code130 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 36/40 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.3) Each 1307.07 1307.07 8.0 False None None False None False 10456.56 0 3855805 147426 None code131 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 5-6W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.1) Each 588.13 588.13 4.0 False None None False None False 2352.52 0 3855806 147426 None code132 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.2) Each 911.55 911.55 4.0 False None None False None False 3646.2 0 3855807 147426 None code133 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 15-18W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.3) Each 1363.72 1363.72 4.0 False None None False None False 5454.88 0 3855808 147426 None code134 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes(KPWD -CSR, 2023-24 Page No.122, Item No. 13.31.3-Vol-2) m 327.54 327.54 25.0 False None None False None False 8188.5 0 3855809 147426 None code135 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wal --40 mm nominal dia Pipes(KPWD -CSR, 2023-24 Page No.122, Item No. 13.31.5-Vol-2) m 552.08 552.08 25.0 False None None False None False 13802.0 0 3855810 147426 None code136 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete(Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0(PWD SR 2023-24, Vol-V, Pg No-95, It No-9.1.4)HDPE Grade PE80-PN6.0,110mm dia m 483.07 483.07 20.5 False None None False None False 9902.935 0 3855811 147426 None code137 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flush ing cistern(PWD SR 2023-24, V-II, Pg No-131, It No-14.4.3) Each 9738.65 9738.65 2.0 False None None False None False 19477.3 0 3855812 147426 None code138 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (Page No.131. Iitem no.14.2.1 of Vol-2-CSR-KPWD 2023-2024) Each 4983.14 4983.14 2.0 False None None False None False 9966.28 0 3855813 147426 None code139 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (PWD SR 2023-24, V-II, Pg No-132, It No-14.7.1) Each 3174.46 3174.46 2.0 False None None False None False 6348.92 0 3855814 147426 None code140 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm(PWD SR 2023-24, V-II, Pg No-128, It No-14.32.2) Each 1048.54 1048.54 2.0 False None None False None False 2097.08 0 3855815 147426 None code141 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (PWD SR 2023-24, V-II, Pg No-131, It No-14.1.1) Each 5030.52 5030.52 2.0 False None None False None False 10061.04 0 3855816 147426 None code142 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. (PWD SR 2023-24, V-II, Pg No-137, It No-14.40.1) Each 492.34 492.34 2.0 False None None False None False 984.68 0 3855817 147426 None code143 Providing and fixing unplasticised PVC connection pipe with brass unions :15 mm nominal bore (PWD SR 2023-24, V-II, Pg No-118, It No-13.8.1.1) Nos 85.49 85.49 2.0 False None None False None False 170.98 0 3855818 147426 None code144 S.C.I. gully or nahani grating 100 mm dia(PWD SR 2023-24, V-II, Pg No-A-33, SL No-735) Nos 32.0 32.0 2.0 False None None False None False 64.0 0 3855819 147426 None code145 Providing and fixing brass bib cock of approved quality- 20 mm dia nominal bore (P.No.117, I.No. 13.2.2 of CSR 2023-24 VOL-02) Nos 314.15 314.15 10.0 False None None False None False 3141.5 0 3855820 147426 None code146 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore (PWD SR 2023-24, V-II, Pg No-117, It No-13.5.2) Nos 323.42 323.42 10.0 False None None False None False 3234.2 0 3855821 147426 None code147 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (PWD SR 2023-24, V-II, Pg No-121, It No-13.24) Nos 170.98 170.98 10.0 False None None False None False 1709.8 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724045339000 1 None None ELIGIBILITY Tenders from Joint ventures are not acceptable None 1724045339000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724045339000 2 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724045339000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724045339000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1724905376000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the submitted tender bid shall be liable to be rejected None 1724905388000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 50%) as prime contractor at least one such similar work of value not less than Rs, xxxxxxx (50% of estimated cost of tender) None 1724905404000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders as may be modified from time to time None 1724905420000 0 None None ELIGIBILITY The tenderer shall scan original Workdone certificates Turnover Statements and any other documents specified by the employer and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification within one week from the date of Technical bid opening None 1724905446000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever None 1724905461000 0 None None ELIGIBILITY If the quoted bid amount is less than the tendered amount, the difference in amount shall be remitted in the from of FDR DD Bank Guarantee in the name of Executive Engineer DUDC Haveri from any of the Nationalized Banks/Scheduled Banks and shall only be returned/refunded after the Completion of the Defect Liability Period None 1724905478000 0 None None ELIGIBILITY The Tenders/ Bids are invited as per Standard tender Bid Document KW4 The contractor shall attach all the requisite documents as required in the standard bid document. The Bidders shall abide as per the detailed instructions and conditions. contained in standard bid document KW4 None 1724905503000 0 None None ELIGIBILITY The contractors shall collect necessary samples as required & all relevant requisite tests to be got done by the registered firms with consultants with the Third Party None 1724905524000 0 None None ELIGIBILITY The contractor has to make his own arrangements for procurement of all materials required for completion of the work in all respects. The contractor shall use relevant ISI mark materials for the work and also obtain necessary quality control certificates from the authorized quality control authority None 1724905536000 0 None None ELIGIBILITY Tender application amount shall not be refundable None 1724905571000 0 None None ELIGIBILITY The Department is not responsible for any delay caused in accessing the https://kppp.karnataka.gov.in portal None 1724905591000 0 None None ELIGIBILITY The payments for the wok will be made depending upon the availability of funds None 1724905613000 0 None None ELIGIBILITY He Defect liability Period for the work carried out is 730 days (2 years) from DATE OF COMPLETION OF WORK None 1724905641000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weight age of 10% per year to bring them to the price level of the 2024-25 None 1724905656000 0 None None ELIGIBILITY The time period for completion of the work is 12 months None 1724905668000 0 None None ELIGIBILITY The Applicable GST shall be paid separately None 1724905684000 0 None None ELIGIBILITY List of works for which tenders already submitted and List of existing commitments and ongoing work None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Work done Certificates for the work performed as Prime Contractor in the same name on works of similar nature over during the five years specified similar nature of work done Certificate i.e. 2019-20 to 2023-24 Satisfactorily completed, as prime contractor, at least one similar work such as Asphalt work along with RCC Drain Work of value not less than Rs.103.63 lakhs and Building work of value not less than Rs.22.07Lakhs.(Note- Certificate should be countersigned by the Employer in charge,not below the rank of an Executive Engineer or equivalent) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The work done Certificates for Quantites of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document executed in any one year in the last five yers ie 2019-20 to 2023-24 the following minimum quantities of work 1.PCC/RCC 952.50 Cum,2.TMT Steel Reinforcement Tonne 39.84 Tonne,3.Asphalt (BM/DBM/SDBC /BC) 276.60 Cum Past Experience Other createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Valid contractor license certificate issued from competent authority in Appropriate Contractor Class Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical work of amount not less then Rs. 1.50 Lakhs in any one year ie for the period from 2019-20 to 2023-24. Capabilities of Vendor Other createdTs version createdDate modifiedDate documentName None None None None Others -- electrical license None None None None Line of Credit i.e.Rs. 75.42 Lakhs 30percent of amount put to tender obtained from Nationalized / Scheduled Banks in Given Pro-forma in the bid document. The LOC not in the Format as per Bid Document Circular No shall be Rejected Refer Kw4 Document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Bidder should be upload the balance sheet for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- balance sheet None None None None Bidder should upload IRT sheet for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Bidder should upload Profit and Loss statement for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- profit and loss statements None None None None Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details (achieved in at least two financial years a minimum financial turnover of Rs 502.78 Lakhs) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Notary Affidavit Declaration that the bidder has not been blacklisted on stamp paper of value not less than Rs.100.00 Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Affidavit None None None None Valid GST Registration Certificate Others Other createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (A) Existing commitments and on-going works: along with the details in the format as in the bid document Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- On going Works Details None None None None Valid PAN Card of the Participating Bidder Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Valid PAN Card None None None None Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person & Designation, Contact Number Office Landline / Mobile, and valid email ID. Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Bidder Details None None None None Notary Self Attestation regarding Agreed to Terms and Conditions as per (bid document) kw4 on stamp paper of value not less than Rs.100.00 Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Notary
tenderCriterionDocumentList	documentName optional documentTypeText Work done Certificates for the work performed as Prime Contractor in the same name on works of similar nature over during the five years specified similar nature of work done Certificate i.e. 2019-20 to 2023-24 Satisfactorily completed, as prime contractor, at least one similar work such as Asphalt work along with RCC Drain Work of value not less than Rs.103.63 lakhs and Building work of value not less than Rs.22.07Lakhs. True Technical Bid The work done Certificates for Quantites of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document executed in any one year in the last five yers ie 2019-20 to 2023-24 the following minimum quantities of work 1.PCC/RCC 952.50 Cum,2.TMT Steel Reinforcement Tonne 39.84 Tonne,3.Asphalt BM orDBM or SDBC or BC 276.60 Cum True Technical Bid Valid contractor license certificate issued from competent authority in Appropriate Contractor Class True Technical Bid Line of Credit i.e.Rs. 75.42 Lakhs 30percent of amount put to tender obtained from Nationalized / Scheduled Banks in Given Pro-forma in the bid document. The LOC not in the Format as per Bid Document Circular No shall be Rejected Refer Kw4 Document True Technical Bid Bidder should upload IRT sheet for the last five years True Technical Bid Bidder should upload Profit and Loss statement for the last five years True Technical Bid Bidder should uploadthe balance sheetfor the last five years True Technical Bid Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details achieved in at least two financial years a minimum financial turnover of Rs 502.78 Lakhs True Technical Bid Valid GST Registration Certificate True Technical Bid The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. A Existing commitments and on going works along with the details in the format as in the bid document True Technical Bid Valid PAN Card of the Participating Bidder True Technical Bid Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person Designation, Contact Number Office Land line,Mobile, and valid email ID. True Technical Bid Notary Self Attestation regarding Agreed to Terms and Conditions as per bid documentv kw4 on stamp paper of value not less than Rs.100.00 True Technical Bid Notary Affidavit Declaration that the bidder has not been blacklisted on stamp paper of value not less than Rs.100.00 True Technical Bid The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical work of amount not less then Rs. 1.50 Lakhs in any one year ie for the period from 2019-20 to 2023-24. True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Other Works Haveri Haveri Dharwad South HAVERI CMC HAVERI None None None None None None Other Works Haveri Haveri Dharwad South HAVERI CMC HAVERI None None None None None None
tenderAddress	createdTs 1725005623000 version 0 createdDate None modifiedDate None blockNumber Office of Executive Engineer, District Urban Development Cell Devagiri Haveri street None city Haveri state Karnataka pin 581110
tenderRecallDTO	None