createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724046747420 version 10 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 601000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 03-10-2024 17:00:00 tenderQueryClose 18-09-2024 16:00:00 technicalBidOpen 04-10-2024 17:05:00 publishedDate 03-09-2024 12:51:51 publishedByPost DUDC_EE_HAV publishedByUser KPE12612 - Mattikatti S S bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 30-08-2024 16:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson S S Mattikatti EE splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 8660975885 mobileNumber 9481724539 tenderSupplierList None
tenderSchedule	createdTs 1724046747467 version 7 createdDate None modifiedDate None tenderNumber DMA/2024-25/OW/WORK_INDENT25068 title Improvements of Roads and Drains in Ranebennur CMC under Amruth Nagarotthan Phase 4(400.95Lakhs) description Improvements of Roads and Drains in Ranebennur CMC under Amruth Nagarotthan Phase 4(400.95Lakhs) category WORKS categoryText Works ecv 40071661.86 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2192 locationName DMA District Urban Development Cell Haveri provisionalAmount 40095000.0 groupOverheadTotal 6112626.38 fileNumber DMA/2024-25/ANH-4/Ranebennur/pkg-2
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724046747000 1 None None Other Works Ward No 2 Devaragudda Road Construction of strom water drain in Baju Honnali farm 20 00 lakhs Ward No 02 Development of road from Dodda Gattara CD of Haralaya Nagar to HPS School No 05 Himbaga 23 00 lakhs Development of drainage and road from Ward No 5 Vikasnagar Main Road via Revan Gowda M Ganagowda house via Kalyan house to Ambabhavani School and Jagadevanna house to Bidari house and from Kalyan house to Doddacharandi and from Pampanagar A Block 1 to 7th Cross(119.00L)- SCP WORKS 10076033.46 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3805499 144501 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m.(PWD SR 2023-24 Vol:1 P.NO.08 I.No.1.14.1) Cum 105.06 105.06 577.92 False None None False None False 60716.2752 0 3805500 144501 None code02 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications.(PWD SR 2023-24 Vol:1 P.NO.54 I.No.1.23) Cum 2762.46 2762.46 55.04 False None None False None False 152045.7984 0 3805501 144501 None code03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 94.009 False None None False None False 579910.49803 0 3805502 144501 None code04 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 66.45 False None None False None False 427292.7705 0 3805503 144501 None code05 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 6512.69 6512.69 134.85 False None None False None False 878236.2465 0 3805504 144501 None code06 For Centering & Shuttering @35% Cum 2279.44 2279.44 134.85 False None None False None False 307382.484 0 3805505 144501 None code07 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 9.858 False None None False None False 802257.15114 0 3805506 144501 None code08 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3).(PWD SR 2023-24 Vol:3 P.NO.5 I.No.1.1A) Cum 139.05 139.05 841.545 False None None False None False 117016.83225 0 3805507 144501 None code09 Filling Pot-holes and Patch Repairs with Open-Graded Premix surfacing, 20mm (using VG-30 Grade Bitumen) Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 510 using HMP 40/60 TPH Capacity compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2(PWD SR 2023-24 Vol:3 P.NO.91 I.No.10.4) Sqm 161.71 161.71 896.9 False None None False None False 145037.699 0 3805508 144501 None code10 Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.1-A) Sqm 42.23 42.23 8969.0 False None None False None False 378760.87 0 3805509 144501 None code11 Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.3-ii) Sqm 12.36 12.36 8969.0 False None None False None False 110856.84 0 3805510 144501 None code12 Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(KPWD SR 2023-24 Vol.3 P.NO.32 I.NO 5.6A) Cum 7685.86 7685.86 448.45 False None None False None False 3446723.917 0 3805511 144501 None code13 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. (PWD SR 2023-24 Vol.3 P.NO.43 I.NO 5.31) Cum 10456.56 10456.56 224.225 False None None False None False 2344622.166 0 3805512 144501 None code14 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per RC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(KPWD SR 2023-24, Vol 3, Pg.No.67, It.No.8.15) Sqm 545.9 545.9 387.0 False None None False None False 211263.3 0 3805513 144501 None code15 Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2(KPWD SR 2023-24, Vol 3, Pg.No.17, It.No.3.6) Cum 507.79 507.79 94.92 False None None False None False 48199.4268 0 3805514 144501 None code16 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 263.625 False None None False None False 65711.1675 0 1724046747000 1 None None Other Works Ward No.19 Madara Oni R.C.C. Development of open drains and roads. Ward No. 20 and 13 from Chakki Makki Durgamma Temple front to MG Road Municipal Stores R.C.C. Construction of open drain and installation of covering slab.-TSP WORKS 11349301.91 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3805515 144502 None code01 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 1.4.1 In all kinds of soils Depth upto 1.5 m(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 800.24 False None None False None False 199467.8224 0 3805516 144502 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 124.92 False None None False None False 770590.2564 0 3805517 144502 None code03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other ppurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 101.735 False None None False None False 654185.55315 0 3805518 144502 None code04 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 6512.69 6512.69 256.6 False None None False None False 1671156.254 0 3805519 144502 None code05 For Centering & Shuttering @35% Cum 2279.44 2279.44 256.6 False None None False None False 584904.304 0 3805520 144502 None code06 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 22.7423 False None None False None False 1850798.621259 0 3805521 144502 None code07 Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment,scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.(KPWD SR 2023-24, Vol-3, Pg No-17, I.No-3.7) Cum 108.15 108.15 137.4 False None None False None False 14859.81 0 3805522 144502 None code08 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (KPWD SR 2023-24, Vol-3, Pg No-26, I.No-4.17) Cum 2635.77 2635.77 137.4 False None None False None False 362154.798 0 3805523 144502 None code09 Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of ngineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) (KPWD SR 2023-24, Vol-3, Pg No-51, I.No-6.8.1) Sqm 1100.04 1100.04 916.0 False None None False None False 1007636.64 0 3805524 144502 None code10 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.(Page No.05. Iitem no.1.1 of Vol-1-CSR-KPWD 2023-2024) Cum 93.73 93.73 48.0 False None None False None False 4499.04 0 3805525 144502 None code11 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m.(Page No.08. Iitem no.1.14.1 of Vol-1-CSR-KPWD 2023-2024) Cum 105.06 105.06 59.2032 False None None False None False 6219.888192 0 3805526 144502 None code12 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth(Page No.08. Iitem no.1.15.1 of Vol-1-CSR-KPWD 2023-2024) Cum 373.89 373.89 14.8 False None None False None False 5533.572 0 3805527 144502 None code13 Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m. Including cost of all labour complete as per specifications (Page No 35. Iitem no.1.10 of Vol-1-CSR-KPWD 2023-2024) Cum 164.8 164.8 67.2 False None None False None False 11074.56 0 3805528 144502 None code14 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.(Page No.05. Item no.4.1 of Vol-2-CSR-KPWD 2023-2024) Sqm 121.54 121.54 160.0 False None None False None False 19446.4 0 3805529 144502 None code15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.1.3 of Vol-1-CSR-KPWD 2023-2024). Cum 6168.67 6168.67 26.493 False None None False None False 163426.57431 0 3805530 144502 None code16 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand))(Page No.09. Iitem no.5.4 of Vol-2-CSR-KPWD 2023-2024) Cum 6580.67 6580.67 18.201 False None None False None False 119774.77467 0 3805531 144502 None code17 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 19.599 False None None False None False 127904.64192 0 3805532 144502 None code18 Footings For Centering & Shuttering @8% Cum 522.09 522.09 19.599 False None None False None False 10232.44191 0 3805533 144502 None code19 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 1.4349 False None None False None False 9364.272192 0 3805534 144502 None code20 Pedastals For Centering & Shuttering @5% Cum 326.3 326.3 1.4349 False None None False None False 468.20787 0 3805535 144502 None code21 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.3.2 of Vol-1-CSR-KPWD 2023-2024) Cum 6674.4 6674.4 18.135 False None None False None False 121040.244 0 3805536 144502 None code22 Plinth Beam-For Centering & Shuttering @50% Cum 3337.2 3337.2 18.135 False None None False None False 60520.122 0 3805537 144502 None code23 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 1.5025 False None None False None False 9805.4352 0 3805538 144502 None code24 Columns Below Plinth-For Centering & Shuttering @70% Cum 4568.26 4568.26 1.5025 False None None False None False 6863.81065 0 3805539 144502 None code25 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.79. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 10.017 False None None False None False 70602.72093 0 3805540 144502 None code26 For Centering & Shuttering @70% Cum 4933.8 4933.8 10.017 False None None False None False 49421.8746 0 3805541 144502 None code27 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.79. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 17.394 False None None False None False 122597.95626 0 3805542 144502 None code28 For Centering & Shuttering @60% Cum 4228.97 4228.97 17.394 False None None False None False 73558.70418 0 3805543 144502 None code29 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.79. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 28.41 False None None False None False 200241.9189 0 3805544 144502 None code30 For Centering & Shuttering @50% Cum 3524.15 3524.15 28.41 False None None False None False 100121.1015 0 3805545 144502 None code31 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.79. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 6.1537 False None None False None False 43373.062173 0 3805546 144502 None code32 For Centering & Shuttering @45% Cum 3171.73 3171.73 6.1537 False None None False None False 19517.874901 0 3805547 144502 None code33 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(Page No.18. Iitem no.2.11h of Vol-1-CSR-KPWD 2023-2024). Tonne 92140.71 92140.71 9.0736 False None None False None False 836047.946256 0 3805548 144502 None code34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications(Page No.17. Iitem no.6.32 of Vol-2-CSR-KPWD 2023-2024) Sqm 1349.3 1349.3 143.219 False None None False None False 193245.3967 0 3805549 144502 None code35 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(Page No.17. Iitem no.6.33 of Vol-2-CSR-KPWD 2023-2024) Sqm 1267.93 1267.93 43.44 False None None False None False 55078.8792 0 3805550 144502 None code36 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(Page No.41. Iitem no.8.4.1 of Vol-2-CSR-KPWD 2023-2024). Sqm 332.69 332.69 303.219 False None None False None False 100877.92911 0 3805551 144502 None code37 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Page No.42. Iitem no.8.5.2 of Vol-2-CSR-KPWD 2023-2024) Sqm 359.47 359.47 122.309 False None None False None False 43966.41623 0 3805552 144502 None code38 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.(Page No.63. Iitem no.9.24 of Vol-2-CSR-KPWD 2023-2024). Sqm 2956.1 2956.1 145.63 False None None False None False 430496.843 0 3805553 144502 None code39 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile(Page No.60. Iitem no.9.7.2 of Vol-2-CSR-KPWD 2023-2024) Sqm 1297.8 1297.8 145.63 False None None False None False 188998.614 0 3805554 144502 None code40 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications(Page No.64. Iitem no.9.30 of Vol-2-CSR-KPWD 2023-2024) Sqm 5487.84 5487.84 3.45 False None None False None False 18933.048 0 3805555 144502 None code41 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.(Page No.60. Iitem no.9.9 of Vol-2-CSR-KPWD 2023-2024) Sqm 1108.28 1108.28 10.08 False None None False None False 11171.4624 0 3805556 144502 None code42 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..(Page No.45. Iitem no.8.29 of Vol-2-CSR-KPWD 2023-2024) Sqm 291.49 291.49 122.3099 False None None False None False 35652.112751 0 3805557 144502 None code43 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Page No.50. Iitem no.8.51 of Vol-2-CSR-KPWD 2023-2024) Sqm 103.0 103.0 303.219 False None None False None False 31231.557 0 3805558 144502 None code44 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.48. Iitem no.8.39 of Vol-2-CSR-KPWD 2023-2024) Sqm 130.81 130.81 303.219 False None None False None False 39664.07739 0 3805559 144502 None code45 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(KPWD 2023-24 VOL-02,P.NO-99,I.NO-12.11) Cum 142216.22 142216.22 0.303 False None None False None False 43091.51466 0 3805560 144502 None code46 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(Page No.105. Iitem no.12.57.1 of Vol-2-CSR-KPWD 2023-2024) Sqm 4164.29 4164.29 12.18 False None None False None False 50721.0522 0 3805561 144502 None code47 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :100x70x4 mm (ordinary type)(Page No.107. Iitem no.12.75.4 of Vol-2-CSR-KPWD 2023-2024) Nos 144.2 144.2 15.0 False None None False None False 2163.0 0 3805562 144502 None code48 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(Page No.107. Iitem no.12.76.2 of Vol-2-CSR-KPWD 2023-2024) Each 360.5 360.5 15.0 False None None False None False 5407.5 0 3805563 144502 None code49 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10mm(Page No.107. Iitem no.12.76.4 of Vol-2-CSR-KPWD 2023-2024) Each 202.91 202.91 15.0 False None None False None False 3043.65 0 3805564 144502 None code50 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(Page No.105. Iitem no.12.61 of Vol-2-CSR-KPWD 2023-2024) Each 1019.7 1019.7 5.0 False None None False None False 5098.5 0 3805565 144502 None code51 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(Page No.105. Iitem no.12.60 of Vol-2-CSR-KPWD 2023-2024) Nos 1083.56 1083.56 5.0 False None None False None False 5417.8 0 3805566 144502 None code52 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete(Page No.105. Iitem no.12.62 of Vol-2-CSR-KPWD 2023-2024) Nos 244.11 244.11 5.0 False None None False None False 1220.55 0 3805567 144502 None code53 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(Page No.105. Iitem no.12.59 of Vol-2-CSR-KPWD 2023-2024) Nos 1147.42 1147.42 5.0 False None None False None False 5737.1 0 3805568 144502 None code54 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(Page No.105. Iitem no.12.58 of Vol-2-CSR-KPWD 2023-2024) Nos 123.6 123.6 5.0 False None None False None False 618.0 0 3805569 144502 None code55 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (Page No.104. Iitem no.12.51 of Vol-2-CSR-KPWD 2023-2024) Nos 1046.48 1046.48 1.0 False None None False None False 1046.48 0 3805570 144502 None code56 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.(Page No.86. Iitem no.11.34B of Vol-2-CSR-KPWD 2021-2022) Kg 188.49 188.49 275.4 False None None False None False 51910.146 0 3805571 144502 None code57 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(Page No.110. Iitem no.12.90 of Vol-2-CSR-KPWD 2023-2024) Sqm 6936.02 6936.02 18.0 False None None False None False 124848.36 0 3805572 144502 None code58 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(Page No.109. Iitem no.12.85 of Vol-2-CSR-KPWD 2023-2024) Sqm 5890.57 5890.57 0.36 False None None False None False 2120.6052 0 3805573 144502 None code59 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.47. Iitem no.8.34.2 of Vol-2-CSR-KPWD 2023-2024) Sqm 59.74 59.74 12.18 False None None False None False 727.6332 0 3805574 144502 None code60 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.46. Iitem no.8.33.2 of Vol-2-CSR-KPWD 2023-2024) Sqm 142.14 142.14 9.45 False None None False None False 1343.223 0 3805575 144502 None code61 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.48. Iitem no.8.37 of Vol-2-CSR-KPWD 2023-2024) Sqm 134.93 134.93 18.36 False None None False None False 2477.3148 0 3805576 144502 None code62 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as(Page No.83. Iitem no.11.28 of Vol-2-CSR-KPWD 2023-2024) Kg 581.95 581.95 75.0 False None None False None False 43646.25 0 3805577 144502 None code63 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in-Charge(Page No.84. Iitem no.11.26.1 of Vol-2-CSR-KPWD 2023-2024) Kg 142.14 142.14 155.399 False None None False None False 22088.41386 0 3805578 144502 None code64 Open Conduit SystemSupplying heavy gauge PVC conduit pipe19/20mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woodplugs in case of RCC ceiling and RCC wall/ stone structure orrawl plugs in case of brick walls and cement plastering thedamaged portion using heavy gauge saddles at an interval of 700mm using NF screws(CSR-KPWD - Electrical SR, 2023-24:Volume-VI, Page No.02, Item No. 1.1.1) m 71.07 71.07 50.0 False None None False None False 3553.5 0 3805579 144502 None code65 Open Conduit System Supplying heavy gauge PVC conduit pipe25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woodplugs in case of RCC ceiling and RCC wall/ stone structure orrawl plugs in case of brick walls and cement plastering thedamaged portion using heavy gauge saddles at an interval of 700mm using NF screws(CSR-KPWD - Electrical SR, 2023-24: Volume-VI.Page No.02, Item No. 1.1.2) m 83.43 83.43 50.0 False None None False None False 4171.5 0 3805580 144502 None code66 Supplying heavy gauge PVC Conduit Pipe .... dia .......mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24:Volume-VI Page No.02, Item No. 1.3.1) m 70.04 70.04 50.0 False None None False None False 3502.0 0 3805581 144502 None code67 Supplying heavy gauge PVC Conduit Pipe 25 mm dia 2mm mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary.(CSR-KPWD - Electrical SR, 2023-24: Volume-VI Page No.02, Item No. 1.3.2) m 81.37 81.37 50.0 False None None False None False 4068.5 0 3805582 144502 None code68 Concealed Conduit System Supplying heavy gauge PVC conduit pipe 32 mm dia.2.5 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., andrunning before concreting the slab. The conduit should be tiedto the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be coveredusing PVC end enclosures, run with 18SWG GI fish wire wherever necessary(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.2.3) m 106.09 106.09 50.0 False None None False None False 5304.5 0 3805583 144502 None code69 Supplying heavy gauge PVC Conduit Pipe 32 dia 2.5 mm thick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduit wherever necessary(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.3) m 101.97 101.97 50.0 False None None False None False 5098.5 0 3805584 144502 None code70 Supplying250amps rated 3 phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolic/FRP/DMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete - 250 A 4 x 30 x 10 mm Aluminium Strips(CSR-KPWD - Electrical SR, 2023-24: Page No.20, Item No. 5.40.2) m 3538.05 3538.05 20.0 False None None False None False 70761.0 0 3805585 144502 None code71 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.1) Point 293.55 293.55 50.0 False None None False None False 14677.5 0 3805586 144502 None code72 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.edium point above 3m upto 6m from tapping point to out let via switch.(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.2) Point 405.82 405.82 25.0 False None None False None False 10145.5 0 3805587 144502 None code73 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.3) Point 587.1 587.1 20.0 False None None False None False 11742.0 0 3805588 144502 None code74 Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654 A) 6 Amps 3/5 way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No.3.1.2) Each 151.41 151.41 20.0 False None None False None False 3028.2 0 3805589 144502 None code75 Supplying and mounting 2 Nos of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required. IS 1293(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.2) Each 175.1 175.1 18.0 False None None False None False 3151.8 0 3805590 144502 None code76 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.- 1 mm2(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.1) m 19.57 19.57 50.0 False None None False None False 978.5 0 3805591 144502 None code77 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 2.5 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.3) m 43.26 43.26 50.0 False None None False None False 2163.0 0 3805592 144502 None code78 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 4.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.03, Item No. 2.3.4) m 64.89 64.89 50.0 False None None False None False 3244.5 0 3805593 144502 None code79 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 10.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.03, Item No. 2.3.6) m 172.01 172.01 26.0 False None None False None False 4472.26 0 3805594 144502 None code80 Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball bearing system.(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.3.1) Each 3073.52 3073.52 8.0 False None None False None False 24588.16 0 3805595 144502 None code81 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to theexistingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 / 0.0076 inch PVC insulated twintwisted copper wire and wiring(CSR-KPWD - Electrical SR, 2023-24: Page No 57, Item No. 13.10) Nos 176.13 176.13 10.0 False None None False None False 1761.3 0 3805596 144502 None code82 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.- 6A Lamp Holder(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.6) Nos 73.13 73.13 25.0 False None None False None False 1828.25 0 3805597 144502 None code83 pplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.- 6A Bakelite Ceiling Rose(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.5) Nos 80.34 80.34 14.0 False None None False None False 1124.76 0 3805598 144502 None code84 Supplying of recess mounting non integrated type LED down light15-18W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceilingclA, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread,life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF 0.95, power lossshould 5% of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20%,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABL/CPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standard electrical condition.(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No.11.4.3) Each 1721.13 1721.13 13.0 False None None False None False 22374.69 0 3805599 144502 None code85 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.- 15" Sweep (450 mm)(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.2.2) Each 4579.38 4579.38 2.0 False None None False None False 9158.76 0 3805600 144502 None code86 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVCinsulated twin core wire of approved make with wire meshand wooden frame.(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.13) Each 728.21 728.21 5.0 False None None False None False 3641.05 0 3805601 144502 None code87 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.3) Each 413.03 413.03 10.0 False None None False None False 4130.3 0 3805602 144502 None code88 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 100 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.4) Each 711.73 711.73 10.0 False None None False None False 7117.3 0 3805603 144502 None code89 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.5) Each 761.17 761.17 10.0 False None None False None False 7611.7 0 3805604 144502 None code90 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.6) Each 1135.06 1135.06 10.0 False None None False None False 11350.6 0 3805605 144502 None code91 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.7) Each 1768.51 1768.51 5.0 False None None False None False 8842.55 0 3805606 144502 None code92 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.13, Item No. 5.18.9) Each 3180.64 3180.64 10.0 False None None False None False 31806.4 0 3805607 144502 None code93 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door -16 Way SP & N (CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.5) Each 3019.96 3019.96 4.0 False None None False None False 12079.84 0 3805608 144502 None code94 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door-12 Way SP & N(CSR-KPWD - Electrical SR, 2022-23: Page No.18, Item No. 5.19.9) Each 2398.87 2398.87 2.0 False None None False None False 4797.74 0 3805609 144502 None code95 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 16-25 A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.1) Each 4405.31 4405.31 1.0 False None None False None False 4405.31 0 3805610 144502 None code96 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 32-40 A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.4) Each 4695.77 4695.77 1.0 False None None False None False 4695.77 0 3805611 144502 None code97 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 32-40 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.8) Each 5301.41 5301.41 1.0 False None None False None False 5301.41 0 3805612 144502 None code98 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 63 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.10) Each 5711.35 5711.35 1.0 False None None False None False 5711.35 0 3805613 144502 None code99 2 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote-Ding Dong Bell(CSR-KPWD - Electrical SR, 2023-24: Page No.48, Item No. 12.2.1) Each 253.38 253.38 1.0 False None None False None False 253.38 0 3805614 144502 None code100 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall1-3 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.8, Item No.3.4.2) Each 163.77 163.77 10.0 False None None False None False 1637.7 0 3805615 144502 None code101 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-5 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.3) Each 182.31 182.31 10.0 False None None False None False 1823.1 0 3805616 144502 None code102 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall6 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No.3.4.4) Each 226.6 226.6 10.0 False None None False None False 2266.0 0 3805617 144502 None code103 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.5) Each 268.83 268.83 10.0 False None None False None False 2688.3 0 3805618 144502 None code104 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall10-12 Way (CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.6) Each 328.57 328.57 10.0 False None None False None False 3285.7 0 3805619 144502 None code105 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16-18 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.8) Each 417.15 417.15 10.0 False None None False None False 4171.5 0 3805620 144502 None code106 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box1 to 3 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.2) Each 165.83 165.83 10.0 False None None False None False 1658.3 0 3805621 144502 None code107 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box4 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.3) Each 180.25 180.25 10.0 False None None False None False 1802.5 0 3805622 144502 None code108 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box6 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.4) Each 241.02 241.02 10.0 False None None False None False 2410.2 0 3805623 144502 None code109 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box8 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.5) Each 292.52 292.52 10.0 False None None False None False 2925.2 0 3805624 144502 None code110 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box10-12 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.6) Each 354.32 354.32 10.0 False None None False None False 3543.2 0 3805625 144502 None code111 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box16-18 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.8) Each 470.71 470.71 10.0 False None None False None False 4707.1 0 3805626 144502 None code112 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch (CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.1) Each 105.06 105.06 10.0 False None None False None False 1050.6 0 3805627 144502 None code113 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.2) Each 170.98 170.98 10.0 False None None False None False 1709.8 0 3805628 144502 None code114 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.3) Each 176.13 176.13 3.0 False None None False None False 528.39 0 3805629 144502 None code115 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.7) Each 185.4 185.4 7.0 False None None False None False 1297.8 0 3805630 144502 None code116 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.10) Each 243.08 243.08 7.0 False None None False None False 1701.56 0 3805631 144502 None code117 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.9) Each 335.78 335.78 7.0 False None None False None False 2350.46 0 3805632 144502 None code118 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 3.6.8) Each 182.31 182.31 5.0 False None None False None False 911.55 0 3805633 144502 None code119 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.1) Each 567.53 567.53 10.0 False None None False None False 5675.3 0 3805634 144502 None code120 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.2) Each 710.7 710.7 10.0 False None None False None False 7107.0 0 3805635 144502 None code121 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 36/40 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.3) Each 1307.07 1307.07 10.0 False None None False None False 13070.7 0 3805636 144502 None code122 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 5-6W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.1) Each 588.13 588.13 10.0 False None None False None False 5881.3 0 3805637 144502 None code123 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.2) Each 911.55 911.55 10.0 False None None False None False 9115.5 0 3805638 144502 None code124 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 15-18W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.3) Each 1363.72 1363.72 10.0 False None None False None False 13637.2 0 3805639 144502 None code125 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A SP Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.1) Nos 56.65 56.65 10.0 False None None False None False 566.5 0 3805640 144502 None code126 6A Bell Buzzer(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.9) Each 133.9 133.9 4.0 False None None False None False 535.6 0 3805641 144502 None code127 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of JOints complete. (Concealed work including cutting chases and making good walls) 25mm Nominal OD Pipe (KPWD -CSR, 2023-24 Page No.122, Item No. 13.31.3) m 327.54 327.54 40.0 False None None False None False 13101.6 0 3805642 144502 None code128 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work).40mm Nominal OD Pipe (KPWD -CSR, 2023-24 Page No.122, Item No. 13.31.5) m 552.08 552.08 35.0 False None None False None False 19322.8 0 3805643 144502 None code129 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0-HDPE Grade PE80-PN6.0,110mm dia (PWD SR 2023-24, V-V, Pg No-95, It No-9.1.4) m 483.07 483.07 20.0 False None None False None False 9661.4 0 3805644 144502 None code130 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P.brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of three urinal basins with 10litre white P.V.C. automatic flush ing cistern(PWD SR 2023-24, V-II, Pg No-131, It No-14.4.3) Each 9738.65 9738.65 2.0 False None None False None False 19477.3 0 3805645 144502 None code131 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fix tures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (PWD SR 2023-24, V-II, Pg No-131, It No-14.2.1) Each 4983.14 4983.14 2.0 False None None False None False 9966.28 0 3805646 144502 None code132 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (PWD SR 2023-24, V-II, Pg No-132, It No-14.7.1) Each 3174.46 3174.46 2.0 False None None False None False 6348.92 0 3805647 144502 None code133 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm(PWD SR 2023-24, V-II, Pg No-136, It No-14.32.2) Each 1048.54 1048.54 2.0 False None None False None False 2097.08 0 3805648 144502 None code134 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (PWD SR 2023-24, V-II, Pg No-131, It No-14.1.1) Each 5030.52 5030.52 2.0 False None None False None False 10061.04 0 3805649 144502 None code135 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. (PWD SR 2023-24, V-II, Pg No-137, It No-14.40.1) Each 492.34 492.34 2.0 False None None False None False 984.68 0 3805650 144502 None code136 Providing and fixing unplasticised PVC connection pipe with brass unions :15 mm nominal bore (PWD SR 2023-24, V-II, Pg No-118, It No-13.8.1.1) Nos 85.49 85.49 2.0 False None None False None False 170.98 0 3805651 144502 None code137 S.C.I. gully or nahani grating 100 mm dia(PWD SR 2023-24, V-II, Pg No-A-34,It No-735) Nos 32.0 32.0 2.0 False None None False None False 64.0 0 3805652 144502 None code138 Providing and fixing brass bib cock of approved quality 15 mm nominal bore: (PWD SR 2023-24, V-II, Pg No-117, It No-13.2.1) Nos 294.58 294.58 10.0 False None None False None False 2945.8 0 3805653 144502 None code139 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore (PWD SR 2023-24, V-II, Pg No-117, It No-13.5.2) Nos 323.42 323.42 10.0 False None None False None False 3234.2 0 3805654 144502 None code140 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (PWD SR 2023-24, V-II, Pg No-121, It No-13.24) Nos 170.98 170.98 10.0 False None None False None False 1709.8 0 1724046748000 1 None None Other Works Asphalting of Koonabevu Road leading to Ward No.1 JH Patel Nagar. Ward No.32 Development of Hallada Sarada Road (37.90 Lakh) Development of Road from Manavi Company Road from Taluk Panchayat Office to Bala Mandir in Ward No. 9 (Rs. 25.00 Lakh) Development of Road from Halageri Road in Ward No. 32 passing from Kambali Kuberappa House to Kurubageri Cross.(7.25) 12533700.09 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3805655 144503 None code01 Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.(PWD SR 2023-24 Vol:3 P.NO.09 I.No2.5ii(A) ) 100 Sqm 404.79 404.79 1110.56 False None None False None False 449543.5824 0 3805656 144503 None code02 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead(PWD SR 2023-24 Vol.3 P.NO.17 I.NO 3.5) Sqm 6.18 6.18 3302.399 False None None False None False 20408.82582 0 3805657 144503 None code03 Wet Mix Macadam (Plant Mix Method)-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(KPWD SR 2023-24, Vol 3, Pg.No.26, It.No.4.17) Cum 2635.77 2635.77 695.5999 False None None False None False 1833441.348423 0 3805658 144503 None code04 Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.1-A) Sqm 42.23 42.23 10609.75 False None None False None False 448049.7425 0 3805659 144503 None code05 Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.3-ii) Sqm 12.36 12.36 12609.75 False None None False None False 155856.51 0 3805660 144503 None code06 Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(KPWD SR 2023-24 Vol.3 P.NO.32 I.NO 5.6A) Cum 7685.86 7685.86 530.4875 False None None False None False 4077252.65675 0 3805661 144503 None code07 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. (PWD SR 2023-24 Vol.3 P.NO.43 I.NO 5.31) Cum 10456.56 10456.56 315.2437 False None None False None False 3296364.663672 0 3805662 144503 None code08 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per RC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(KPWD SR 2023-24, Vol 3, Pg.No.67, It.No.8.15) Sqm 545.9 545.9 461.2 False None None False None False 251769.08 0 3805663 144503 None code09 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2(KPWD SR 2023-24, Vol 3, Pg.No.17, It.No.3.6) Cum 507.79 507.79 129.36 False None None False None False 65687.7144 0 3805664 144503 None code10 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804(KPWD SR 2023-24, Vol 3, Pg.No.78, It.No.8.54) Each 9270.0 9270.0 4.0 False None None False None False 37080.0 0 3805665 144503 None code11 Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover, curing, refilling with appurtenances complete.Upto 0.30m depth-(KPWD SR 2023-24, Vol 5, Pg.No.198, It.No.16.28.1) Nos 8414.07 8414.07 45.0 False None None False None False 378633.15 0 3805666 144503 None code12 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 277.44 False None None False None False 69154.6944 0 3805667 144503 None code13 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 40.8 False None None False None False 251681.736 0 3805668 144503 None code14 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other ppurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 33.66 False None None False None False 216443.5614 0 3805669 144503 None code15 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 6512.69 6512.69 55.08 False None None False None False 358718.9652 0 3805670 144503 None code16 For Centering & Shuttering @35% Cum 2279.44 2279.44 55.08 False None None False None False 125551.5552 0 3805671 144503 None code17 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 3.9933 False None None False None False 324980.065089 0 3805672 144503 None code18 Providing and laying Reinforced Cement Concrete pipe light duty NP2 for culverts, roadway utilities& crossingsas per IS 458:2003 in Single row including pointing ends and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing completeas per specifications.300 mm dia (KPWD 2023-24,P.no-80,I.no-8.58a) m 878.59 878.59 197.0 False None None False None False 173082.23 0 1724657514000 1 None None Other Works Improvements of Roads and Drains in Ranebennur CMC under Amruth Nagarotthan Phase 4(400.95Lakhs) 33959035.48 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3854914 147386 None code01 Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.(PWD SR 2023-24 Vol:3 P.NO.09 I.No2.5ii(A) ) 100 Sqm 404.79 404.79 1110.56 False None None False None False 449543.5824 0 3854932 147386 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work-In all kinds of soils Depth upto 3 m.(PWD SR 2023-24 Vol:1 P.NO.08 I.No.1.14.1) Cum 105.06 105.06 577.92 False None None False None False 60716.2752 0 3854948 147386 None code01 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 1.4.1 In all kinds of soils Depth upto 1.5 m(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 800.24 False None None False None False 199467.8224 0 3854915 147386 None code02 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead(PWD SR 2023-24 Vol.3 P.NO.17 I.NO 3.5) Sqm 6.18 6.18 3302.399 False None None False None False 20408.82582 0 3854933 147386 None code02 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications.(PWD SR 2023-24 Vol:1 P.NO.54 I.No.1.23) Cum 2762.46 2762.46 55.04 False None None False None False 152045.7984 0 3854949 147386 None code02 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 124.92 False None None False None False 770590.2564 0 3854916 147386 None code03 Wet Mix Macadam (Plant Mix Method)-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(KPWD SR 2023-24, Vol 3, Pg.No.26, It.No.4.17) Cum 2635.77 2635.77 695.5999 False None None False None False 1833441.348423 0 3854934 147386 None code03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 94.009 False None None False None False 579910.49803 0 3854950 147386 None code03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other ppurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 101.735 False None None False None False 654185.55315 0 3854917 147386 None code04 Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.1-A) Sqm 42.23 42.23 10609.75 False None None False None False 448049.7425 0 3854935 147386 None code04 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 66.45 False None None False None False 427292.7705 0 3854951 147386 None code04 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 6512.69 6512.69 256.6 False None None False None False 1671156.254 0 3854918 147386 None code05 Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.3-ii) Sqm 12.36 12.36 12609.75 False None None False None False 155856.51 0 3854936 147386 None code05 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 6512.69 6512.69 134.85 False None None False None False 878236.2465 0 3854952 147386 None code05 For Centering & Shuttering @35% Cum 2279.44 2279.44 256.6 False None None False None False 584904.304 0 3854919 147386 None code06 Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(KPWD SR 2023-24 Vol.3 P.NO.32 I.NO 5.6A) Cum 7685.86 7685.86 530.4875 False None None False None False 4077252.65675 0 3854937 147386 None code06 For Centering & Shuttering @35% Cum 2279.44 2279.44 134.85 False None None False None False 307382.484 0 3854953 147386 None code06 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 22.7423 False None None False None False 1850798.621259 0 3854920 147386 None code07 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. (PWD SR 2023-24 Vol.3 P.NO.43 I.NO 5.31) Cum 10456.56 10456.56 315.2437 False None None False None False 3296364.663672 0 3854938 147386 None code07 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 9.858 False None None False None False 802257.15114 0 3854954 147386 None code07 Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment,scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.(KPWD SR 2023-24, Vol-3, Pg No-17, I.No-3.7) Cum 108.15 108.15 137.4 False None None False None False 14859.81 0 3854921 147386 None code08 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per RC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(KPWD SR 2023-24, Vol 3, Pg.No.67, It.No.8.15) Sqm 545.9 545.9 461.2 False None None False None False 251769.08 0 3854939 147386 None code08 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3).(PWD SR 2023-24 Vol:3 P.NO.5 I.No.1.1A) Cum 139.05 139.05 841.545 False None None False None False 117016.83225 0 3854955 147386 None code08 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (KPWD SR 2023-24, Vol-3, Pg No-26, I.No-4.17) Cum 2635.77 2635.77 137.4 False None None False None False 362154.798 0 3854922 147386 None code09 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2(KPWD SR 2023-24, Vol 3, Pg.No.17, It.No.3.6) Cum 507.79 507.79 129.36 False None None False None False 65687.7144 0 3854940 147386 None code09 Filling Pot-holes and Patch Repairs with Open-Graded Premix surfacing, 20mm (using VG-30 Grade Bitumen) Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 510 using HMP 40/60 TPH Capacity compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2(PWD SR 2023-24 Vol:3 P.NO.91 I.No.10.4) Sqm 161.71 161.71 896.9 False None None False None False 145037.699 0 3854956 147386 None code09 Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of ngineer-in charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) (KPWD SR 2023-24, Vol-3, Pg No-51, I.No-6.8.1) Sqm 1100.04 1100.04 916.0 False None None False None False 1007636.64 0 3854923 147386 None code10 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804(KPWD SR 2023-24, Vol 3, Pg.No.78, It.No.8.54) Each 9270.0 9270.0 4.0 False None None False None False 37080.0 0 3854941 147386 None code10 Prime Coat over WMM/WBM-Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means.(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.1-A) Sqm 42.23 42.23 8969.0 False None None False None False 378760.87 0 3854957 147386 None code10 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.(Page No.05. Iitem no.1.1 of Vol-1-CSR-KPWD 2023-2024) Cum 93.73 93.73 48.0 False None None False None False 4499.04 0 3854924 147386 None code11 Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plastering both inside and outside to the brick masonry and fixing of manhole frame and cover, curing, refilling with appurtenances complete.Upto 0.30m depth-(KPWD SR 2023-24, Vol 5, Pg.No.198, It.No.16.28.1) Nos 8414.07 8414.07 45.0 False None None False None False 378633.15 0 3854942 147386 None code11 Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom(KPWD SR 2023-24, Vol 3, Pg.No.31, It.No.5.3-ii) Sqm 12.36 12.36 8969.0 False None None False None False 110856.84 0 3854958 147386 None code11 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m.(Page No.08. Iitem no.1.14.1 of Vol-1-CSR-KPWD 2023-2024) Cum 105.06 105.06 59.2032 False None None False None False 6219.888192 0 3854925 147386 None code12 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 277.44 False None None False None False 69154.6944 0 3854943 147386 None code12 Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(KPWD SR 2023-24 Vol.3 P.NO.32 I.NO 5.6A) Cum 7685.86 7685.86 448.45 False None None False None False 3446723.917 0 3854959 147386 None code12 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth(Page No.08. Iitem no.1.15.1 of Vol-1-CSR-KPWD 2023-2024) Cum 373.89 373.89 14.8 False None None False None False 5533.572 0 3854926 147386 None code13 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.3) Cum 6168.67 6168.67 40.8 False None None False None False 251681.736 0 3854944 147386 None code13 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. (PWD SR 2023-24 Vol.3 P.NO.43 I.NO 5.31) Cum 10456.56 10456.56 224.225 False None None False None False 2344622.166 0 3854960 147386 None code13 Refilling available earth around trenches/pipelines,cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5m. Including cost of all labour complete as per specifications (Page No 35. Iitem no.1.10 of Vol-1-CSR-KPWD 2023-2024) Cum 164.8 164.8 67.2 False None None False None False 11074.56 0 3854927 147386 None code14 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other ppurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 33.66 False None None False None False 216443.5614 0 3854945 147386 None code14 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per RC:35:2015.The finished surface to be level, uniform and free from streaks and holes.(KPWD SR 2023-24, Vol 3, Pg.No.67, It.No.8.15) Sqm 545.9 545.9 387.0 False None None False None False 211263.3 0 3854961 147386 None code14 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.(Page No.05. Item no.4.1 of Vol-2-CSR-KPWD 2023-2024) Sqm 121.54 121.54 160.0 False None None False None False 19446.4 0 3854928 147386 None code15 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 6512.69 6512.69 55.08 False None None False None False 358718.9652 0 3854946 147386 None code15 Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2(KPWD SR 2023-24, Vol 3, Pg.No.17, It.No.3.6) Cum 507.79 507.79 94.92 False None None False None False 48199.4268 0 3854962 147386 None code15 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.1.3 of Vol-1-CSR-KPWD 2023-2024). Cum 6168.67 6168.67 26.493 False None None False None False 163426.57431 0 3854929 147386 None code16 For Centering & Shuttering @35% Cum 2279.44 2279.44 55.08 False None None False None False 125551.5552 0 3854947 147386 None code16 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD SR 2023-24 Vol:1 P.NO.05 I.No.1.4.1) Cum 249.26 249.26 263.625 False None None False None False 65711.1675 0 3854963 147386 None code16 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand))(Page No.09. Iitem no.5.4 of Vol-2-CSR-KPWD 2023-2024) Cum 6580.67 6580.67 18.201 False None None False None False 119774.77467 0 3854930 147386 None code17 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 3.9933 False None None False None False 324980.065089 0 3854964 147386 None code17 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 19.599 False None None False None False 127904.64192 0 3854931 147386 None code18 Providing and laying Reinforced Cement Concrete pipe light duty NP2 for culverts, roadway utilities& crossingsas per IS 458:2003 in Single row including pointing ends and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing completeas per specifications.300 mm dia (KPWD 2023-24,P.no-80,I.no-8.58a) m 878.59 878.59 197.0 False None None False None False 173082.23 0 3854965 147386 None code18 Footings For Centering & Shuttering @8% Cum 522.09 522.09 19.599 False None None False None False 10232.44191 0 3854966 147386 None code19 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 1.4349 False None None False None False 9364.272192 0 3854967 147386 None code20 Pedastals For Centering & Shuttering @5% Cum 326.3 326.3 1.4349 False None None False None False 468.20787 0 3854968 147386 None code21 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.3.2 of Vol-1-CSR-KPWD 2023-2024) Cum 6674.4 6674.4 18.135 False None None False None False 121040.244 0 3854969 147386 None code22 Plinth Beam-For Centering & Shuttering @50% Cum 3337.2 3337.2 18.135 False None None False None False 60520.122 0 3854970 147386 None code23 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.15. Iitem no.2.2.3 of Vol-1-CSR-KPWD 2023-2024) Cum 6526.08 6526.08 1.5025 False None None False None False 9805.4352 0 3854971 147386 None code24 Columns Below Plinth-For Centering & Shuttering @70% Cum 4568.26 4568.26 1.5025 False None None False None False 6863.81065 0 3854972 147386 None code25 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.79. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 10.017 False None None False None False 70602.72093 0 3854973 147386 None code26 For Centering & Shuttering @70% Cum 4933.8 4933.8 10.017 False None None False None False 49421.8746 0 3854974 147386 None code27 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.79. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 17.394 False None None False None False 122597.95626 0 3854975 147386 None code28 For Centering & Shuttering @60% Cum 4228.97 4228.97 17.394 False None None False None False 73558.70418 0 3854976 147386 None code29 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.79. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 28.41 False None None False None False 200241.9189 0 3854977 147386 None code30 For Centering & Shuttering @50% Cum 3524.15 3524.15 28.41 False None None False None False 100121.1015 0 3854978 147386 None code31 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.79. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7048.29 7048.29 6.1537 False None None False None False 43373.062173 0 3854979 147386 None code32 For Centering & Shuttering @45% Cum 3171.73 3171.73 6.1537 False None None False None False 19517.874901 0 3854980 147386 None code33 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.(Page No.18. Iitem no.2.11h of Vol-1-CSR-KPWD 2023-2024). Tonne 92140.71 92140.71 9.0736 False None None False None False 836047.946256 0 3854981 147386 None code34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications(Page No.17. Iitem no.6.32 of Vol-2-CSR-KPWD 2023-2024) Sqm 1349.3 1349.3 143.219 False None None False None False 193245.3967 0 3854982 147386 None code35 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(Page No.17. Iitem no.6.33 of Vol-2-CSR-KPWD 2023-2024) Sqm 1267.93 1267.93 43.44 False None None False None False 55078.8792 0 3854983 147386 None code36 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge(Page No.41. Iitem no.8.4.1 of Vol-2-CSR-KPWD 2023-2024). Sqm 332.69 332.69 303.219 False None None False None False 100877.92911 0 3854984 147386 None code37 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Page No.42. Iitem no.8.5.2 of Vol-2-CSR-KPWD 2023-2024) Sqm 359.47 359.47 122.309 False None None False None False 43966.41623 0 3854985 147386 None code38 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.(Page No.63. Iitem no.9.24 of Vol-2-CSR-KPWD 2023-2024). Sqm 2956.1 2956.1 145.63 False None None False None False 430496.843 0 3854986 147386 None code39 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile(Page No.60. Iitem no.9.7.2 of Vol-2-CSR-KPWD 2023-2024) Sqm 1297.8 1297.8 145.63 False None None False None False 188998.614 0 3854987 147386 None code40 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications(Page No.64. Iitem no.9.30 of Vol-2-CSR-KPWD 2023-2024) Sqm 5487.84 5487.84 3.45 False None None False None False 18933.048 0 3854988 147386 None code41 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.(Page No.60. Iitem no.9.9 of Vol-2-CSR-KPWD 2023-2024) Sqm 1108.28 1108.28 10.08 False None None False None False 11171.4624 0 3854989 147386 None code42 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..(Page No.45. Iitem no.8.29 of Vol-2-CSR-KPWD 2023-2024) Sqm 291.49 291.49 122.3099 False None None False None False 35652.112751 0 3854990 147386 None code43 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Page No.50. Iitem no.8.51 of Vol-2-CSR-KPWD 2023-2024) Sqm 103.0 103.0 303.219 False None None False None False 31231.557 0 3854991 147386 None code44 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.48. Iitem no.8.39 of Vol-2-CSR-KPWD 2023-2024) Sqm 130.81 130.81 303.219 False None None False None False 39664.07739 0 3854992 147386 None code45 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(KPWD 2023-24 VOL-02,P.NO-99,I.NO-12.11) Cum 142216.22 142216.22 0.303 False None None False None False 43091.51466 0 3854993 147386 None code46 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(Page No.105. Iitem no.12.57.1 of Vol-2-CSR-KPWD 2023-2024) Sqm 4164.29 4164.29 12.18 False None None False None False 50721.0522 0 3854994 147386 None code47 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :100x70x4 mm (ordinary type)(Page No.107. Iitem no.12.75.4 of Vol-2-CSR-KPWD 2023-2024) Nos 144.2 144.2 15.0 False None None False None False 2163.0 0 3854995 147386 None code48 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(Page No.107. Iitem no.12.76.2 of Vol-2-CSR-KPWD 2023-2024) Each 360.5 360.5 15.0 False None None False None False 5407.5 0 3854996 147386 None code49 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10mm(Page No.107. Iitem no.12.76.4 of Vol-2-CSR-KPWD 2023-2024) Each 202.91 202.91 15.0 False None None False None False 3043.65 0 3854997 147386 None code50 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(Page No.105. Iitem no.12.61 of Vol-2-CSR-KPWD 2023-2024) Each 1019.7 1019.7 5.0 False None None False None False 5098.5 0 3854998 147386 None code51 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(Page No.105. Iitem no.12.60 of Vol-2-CSR-KPWD 2023-2024) Nos 1083.56 1083.56 5.0 False None None False None False 5417.8 0 3854999 147386 None code52 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete(Page No.105. Iitem no.12.62 of Vol-2-CSR-KPWD 2023-2024) Nos 244.11 244.11 5.0 False None None False None False 1220.55 0 3855000 147386 None code53 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(Page No.105. Iitem no.12.59 of Vol-2-CSR-KPWD 2023-2024) Nos 1147.42 1147.42 5.0 False None None False None False 5737.1 0 3855001 147386 None code54 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(Page No.105. Iitem no.12.58 of Vol-2-CSR-KPWD 2023-2024) Nos 123.6 123.6 5.0 False None None False None False 618.0 0 3855002 147386 None code55 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (Page No.104. Iitem no.12.51 of Vol-2-CSR-KPWD 2023-2024) Nos 1046.48 1046.48 1.0 False None None False None False 1046.48 0 3855003 147386 None code56 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.(Page No.86. Iitem no.11.34B of Vol-2-CSR-KPWD 2021-2022) Kg 188.49 188.49 275.4 False None None False None False 51910.146 0 3855004 147386 None code57 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(Page No.110. Iitem no.12.90 of Vol-2-CSR-KPWD 2023-2024) Sqm 6936.02 6936.02 18.0 False None None False None False 124848.36 0 3855005 147386 None code58 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(Page No.109. Iitem no.12.85 of Vol-2-CSR-KPWD 2023-2024) Sqm 5890.57 5890.57 0.36 False None None False None False 2120.6052 0 3855006 147386 None code59 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.47. Iitem no.8.34.2 of Vol-2-CSR-KPWD 2023-2024) Sqm 59.74 59.74 12.18 False None None False None False 727.6332 0 3855007 147386 None code60 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.46. Iitem no.8.33.2 of Vol-2-CSR-KPWD 2023-2024) Sqm 142.14 142.14 9.45 False None None False None False 1343.223 0 3855008 147386 None code61 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(Page No.48. Iitem no.8.37 of Vol-2-CSR-KPWD 2023-2024) Sqm 134.93 134.93 18.36 False None None False None False 2477.3148 0 3855009 147386 None code62 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as(Page No.83. Iitem no.11.28 of Vol-2-CSR-KPWD 2023-2024) Kg 581.95 581.95 75.0 False None None False None False 43646.25 0 3855010 147386 None code63 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in-Charge(Page No.84. Iitem no.11.26.1 of Vol-2-CSR-KPWD 2023-2024) Kg 142.14 142.14 155.399 False None None False None False 22088.41386 0 3855011 147386 None code64 Open Conduit SystemSupplying heavy gauge PVC conduit pipe19/20mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woodplugs in case of RCC ceiling and RCC wall/ stone structure orrawl plugs in case of brick walls and cement plastering thedamaged portion using heavy gauge saddles at an interval of 700mm using NF screws(CSR-KPWD - Electrical SR, 2023-24:Volume-VI, Page No.02, Item No. 1.1.1) m 71.07 71.07 50.0 False None None False None False 3553.5 0 3855012 147386 None code65 Open Conduit System Supplying heavy gauge PVC conduit pipe25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woodplugs in case of RCC ceiling and RCC wall/ stone structure orrawl plugs in case of brick walls and cement plastering thedamaged portion using heavy gauge saddles at an interval of 700mm using NF screws(CSR-KPWD - Electrical SR, 2023-24: Volume-VI.Page No.02, Item No. 1.1.2) m 83.43 83.43 50.0 False None None False None False 4171.5 0 3855013 147386 None code66 Supplying heavy gauge PVC Conduit Pipe .... dia .......mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary 19/20 mm dia 2 mm thick(CSR-KPWD - Electrical SR, 2023-24:Volume-VI Page No.02, Item No. 1.3.1) m 70.04 70.04 50.0 False None None False None False 3502.0 0 3855014 147386 None code67 Supplying heavy gauge PVC Conduit Pipe 25 mm dia 2mm mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduitwherever necessary.(CSR-KPWD - Electrical SR, 2023-24: Volume-VI Page No.02, Item No. 1.3.2) m 81.37 81.37 50.0 False None None False None False 4068.5 0 3855015 147386 None code68 Concealed Conduit System Supplying heavy gauge PVC conduit pipe 32 mm dia.2.5 mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., andrunning before concreting the slab. The conduit should be tiedto the reinforcement rods by using binding wires and unusedways of junction boxes and pipe ends should be coveredusing PVC end enclosures, run with 18SWG GI fish wire wherever necessary(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.2.3) m 106.09 106.09 50.0 False None None False None False 5304.5 0 3855016 147386 None code69 Supplying heavy gauge PVC Conduit Pipe 32 dia 2.5 mm thick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by bracing Uor J hooks and cement plastering upto the wall surface andrun with 18 SWG GI fish wire run throughout the conduit wherever necessary(CSR-KPWD - Electrical SR, 2023-24: Page No.02, Item No. 1.3.3) m 101.97 101.97 50.0 False None None False None False 5098.5 0 3855017 147386 None code70 Supplying250amps rated 3 phase with neutral bus bar usingrequired capacity electrolytic aluminium strips covered withheat shrinkable coloured PVC sleeve, mounted onphenolic/FRP/DMC insulator which are mounted on powdercoated 40x6mm M.S.flat frame work in existing panel board.The bus bar shall have suitable holes for termination ofincoming and outgoing cables as per IS specification withnecessary bolts, nuts and washers etc., complete - 250 A 4 x 30 x 10 mm Aluminium Strips(CSR-KPWD - Electrical SR, 2023-24: Page No.20, Item No. 5.40.2) m 3538.05 3538.05 20.0 False None None False None False 70761.0 0 3855018 147386 None code71 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Short point upto 3m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.1) Point 293.55 293.55 50.0 False None None False None False 14677.5 0 3855019 147386 None code72 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet.edium point above 3m upto 6m from tapping point to out let via switch.(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.2) Point 405.82 405.82 25.0 False None None False None False 10145.5 0 3855020 147386 None code73 WIRES & CABLES Point wiring using Copper wire with switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2(Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose length in a wood/PVC roundblock. complete for each outlet. Long point above 6m upto 10m from tapping point to out let via switch(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.1.3) Point 587.1 587.1 20.0 False None None False None False 11742.0 0 3855021 147386 None code74 Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654 A) 6 Amps 3/5 way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No.3.1.2) Each 151.41 151.41 20.0 False None None False None False 3028.2 0 3855022 147386 None code75 Supplying and mounting 2 Nos of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required. IS 1293(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.2) Each 175.1 175.1 18.0 False None None False None False 3151.8 0 3855023 147386 None code76 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.- 1 mm2(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.1) m 19.57 19.57 50.0 False None None False None False 978.5 0 3855024 147386 None code77 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 2.5 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 2.3.3) m 43.26 43.26 50.0 False None None False None False 2163.0 0 3855025 147386 None code78 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 4.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.03, Item No. 2.3.4) m 64.89 64.89 50.0 False None None False None False 3244.5 0 3855026 147386 None code79 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments- 10.00 mm2 (CSR-KPWD - Electrical SR, 2023-24: Page No.03, Item No. 2.3.6) m 172.01 172.01 26.0 False None None False None False 4472.26 0 3855027 147386 None code80 Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc, for operation on 230 V, 50 cycles.Single phase AC supply conforming to ISS-374- 1979 and withdouble ball bearing system.(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.3.1) Each 3073.52 3073.52 8.0 False None None False None False 24588.16 0 3855028 147386 None code81 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to theexistingboard together with supplying and fixing 5 A. ceiling rose,necessary length of 23 / 0.0076 inch PVC insulated twintwisted copper wire and wiring(CSR-KPWD - Electrical SR, 2023-24: Page No 57, Item No. 13.10) Nos 176.13 176.13 10.0 False None None False None False 1761.3 0 3855029 147386 None code82 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.- 6A Lamp Holder(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.6) Nos 73.13 73.13 25.0 False None None False None False 1828.25 0 3855030 147386 None code83 pplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.- 6A Bakelite Ceiling Rose(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.5) Nos 80.34 80.34 14.0 False None None False None False 1124.76 0 3855031 147386 None code84 Supplying of recess mounting non integrated type LED down light15-18W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceilingclA, LED of Power/COB with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread,life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosedwith anti glare opal diffuser which enhances the lightinglevel. LED's are driven by HF electronic driver integrated in aseparate control gear assembly., with PF 0.95, power lossshould 5% of lamp Wage, short circuit & open circuitprotection to be integrated in the circuit, THD less than 20%,Life as per LM 79. The operating input voltage should bebetween 130 to 275 V. BIS Approved and Tested byNABL/CPRI accredited laboratory with 2 years Warrantyagainst any manufacturing defect working under standard electrical condition.(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No.11.4.3) Each 1721.13 1721.13 13.0 False None None False None False 22374.69 0 3855032 147386 None code85 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.- 15" Sweep (450 mm)(CSR-KPWD - Electrical SR, 2023-24: Page No.30, Item No. 6.2.2) Each 4579.38 4579.38 2.0 False None None False None False 9158.76 0 3855033 147386 None code86 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to matchthe existing wall or brackets, with bolts and nuts and a 5 A,ceiling rose with sufficient length of 23 / 0.0076 inch PVCinsulated twin core wire of approved make with wire meshand wooden frame.(CSR-KPWD - Electrical SR, 2023-24: Page No.57, Item No. 13.13) Each 728.21 728.21 5.0 False None None False None False 3641.05 0 3855034 147386 None code87 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.3) Each 413.03 413.03 10.0 False None None False None False 4130.3 0 3855035 147386 None code88 Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 100 Amps(CSR-KPWD - Electrical SR, 2023-24: Page No.14, Item No. 5.7.4) Each 711.73 711.73 10.0 False None None False None False 7117.3 0 3855036 147386 None code89 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.5) Each 761.17 761.17 10.0 False None None False None False 7611.7 0 3855037 147386 None code90 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps DP(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.6) Each 1135.06 1135.06 10.0 False None None False None False 11350.6 0 3855038 147386 None code91 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 - 32 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.17, Item No. 5.18.7) Each 1768.51 1768.51 5.0 False None None False None False 8842.55 0 3855039 147386 None code92 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50 - 63 Amps TPN(CSR-KPWD - Electrical SR, 2023-24: Page No.13, Item No. 5.18.9) Each 3180.64 3180.64 10.0 False None None False None False 31806.4 0 3855040 147386 None code93 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door -16 Way SP & N (CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.19.5) Each 3019.96 3019.96 4.0 False None None False None False 12079.84 0 3855041 147386 None code94 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door-12 Way SP & N(CSR-KPWD - Electrical SR, 2022-23: Page No.18, Item No. 5.19.9) Each 2398.87 2398.87 2.0 False None None False None False 4797.74 0 3855042 147386 None code95 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 16-25 A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.1) Each 4405.31 4405.31 1.0 False None None False None False 4405.31 0 3855043 147386 None code96 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 32-40 A 2 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.4) Each 4695.77 4695.77 1.0 False None None False None False 4695.77 0 3855044 147386 None code97 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 32-40 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.8) Each 5301.41 5301.41 1.0 False None None False None False 5301.41 0 3855045 147386 None code98 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 63 A 4 pole(CSR-KPWD - Electrical SR, 2023-24: Page No.18, Item No. 5.20.10) Each 5711.35 5711.35 1.0 False None None False None False 5711.35 0 3855046 147386 None code99 2 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote-Ding Dong Bell(CSR-KPWD - Electrical SR, 2023-24: Page No.48, Item No. 12.2.1) Each 253.38 253.38 1.0 False None None False None False 253.38 0 3855047 147386 None code100 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall1-3 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.8, Item No.3.4.2) Each 163.77 163.77 10.0 False None None False None False 1637.7 0 3855048 147386 None code101 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall4-5 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.3) Each 182.31 182.31 10.0 False None None False None False 1823.1 0 3855049 147386 None code102 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall6 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No.3.4.4) Each 226.6 226.6 10.0 False None None False None False 2266.0 0 3855050 147386 None code103 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall8 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.5) Each 268.83 268.83 10.0 False None None False None False 2688.3 0 3855051 147386 None code104 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall10-12 Way (CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.6) Each 328.57 328.57 10.0 False None None False None False 3285.7 0 3855052 147386 None code105 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16-18 Way(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.4.8) Each 417.15 417.15 10.0 False None None False None False 4171.5 0 3855053 147386 None code106 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box1 to 3 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.2) Each 165.83 165.83 10.0 False None None False None False 1658.3 0 3855054 147386 None code107 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box4 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.3) Each 180.25 180.25 10.0 False None None False None False 1802.5 0 3855055 147386 None code108 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box6 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.4) Each 241.02 241.02 10.0 False None None False None False 2410.2 0 3855056 147386 None code109 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box8 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.5) Each 292.52 292.52 10.0 False None None False None False 2925.2 0 3855057 147386 None code110 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box10-12 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.6) Each 354.32 354.32 10.0 False None None False None False 3543.2 0 3855058 147386 None code111 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box16-18 Module(CSR-KPWD - Electrical SR, 2023-24: Page No.08, Item No. 3.5.8) Each 470.71 470.71 10.0 False None None False None False 4707.1 0 3855059 147386 None code112 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch (CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.1) Each 105.06 105.06 10.0 False None None False None False 1050.6 0 3855060 147386 None code113 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.2) Each 170.98 170.98 10.0 False None None False None False 1709.8 0 3855061 147386 None code114 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.3) Each 176.13 176.13 3.0 False None None False None False 528.39 0 3855062 147386 None code115 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.7) Each 185.4 185.4 7.0 False None None False None False 1297.8 0 3855063 147386 None code116 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.10) Each 243.08 243.08 7.0 False None None False None False 1701.56 0 3855064 147386 None code117 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.09, Item No. 3.6.9) Each 335.78 335.78 7.0 False None None False None False 2350.46 0 3855065 147386 None code118 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push(CSR-KPWD - Electrical SR, 2023-24: Page No.05, Item No. 3.6.8) Each 182.31 182.31 5.0 False None None False None False 911.55 0 3855066 147386 None code119 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.1) Each 567.53 567.53 10.0 False None None False None False 5675.3 0 3855067 147386 None code120 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 20/22 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.2) Each 710.7 710.7 10.0 False None None False None False 7107.0 0 3855068 147386 None code121 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 4' - 36/40 W(CSR-KPWD - Electrical SR, 2023-24: Page No.43, Item No. 11.3.3) Each 1307.07 1307.07 10.0 False None None False None False 13070.7 0 3855069 147386 None code122 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 5-6W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.1) Each 588.13 588.13 10.0 False None None False None False 5881.3 0 3855070 147386 None code123 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.2) Each 911.55 911.55 10.0 False None None False None False 9115.5 0 3855071 147386 None code124 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 15-18W(CSR-KPWD - Electrical SR, 2023-24: Page No.44, Item No. 11.5.3) Each 1363.72 1363.72 10.0 False None None False None False 13637.2 0 3855072 147386 None code125 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A SP Switch(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.1) Nos 56.65 56.65 10.0 False None None False None False 566.5 0 3855073 147386 None code126 6A Bell Buzzer(CSR-KPWD - Electrical SR, 2023-24: Page No.10, Item No. 3.14.9) Each 133.9 133.9 4.0 False None None False None False 535.6 0 3855074 147386 None code127 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1 00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of JOints complete. (Concealed work including cutting chases and making good walls) 25mm Nominal OD Pipe (KPWD -CSR, 2023-24 Page No.122, Item No. 13.31.3) m 327.54 327.54 40.0 False None None False None False 13101.6 0 3855075 147386 None code128 Providing and fixing Chorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work).40mm Nominal OD Pipe (KPWD -CSR, 2023-24 Page No.122, Item No. 13.31.5) m 552.08 552.08 35.0 False None None False None False 19322.8 0 3855076 147386 None code129 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0-HDPE Grade PE80-PN6.0,110mm dia (PWD SR 2023-24, V-V, Pg No-95, It No-9.1.4) m 483.07 483.07 20.0 False None None False None False 9661.4 0 3855077 147386 None code130 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P.brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of three urinal basins with 10litre white P.V.C. automatic flush ing cistern(PWD SR 2023-24, V-II, Pg No-131, It No-14.4.3) Each 9738.65 9738.65 2.0 False None None False None False 19477.3 0 3855078 147386 None code131 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fix tures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (PWD SR 2023-24, V-II, Pg No-131, It No-14.2.1) Each 4983.14 4983.14 2.0 False None None False None False 9966.28 0 3855079 147386 None code132 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (PWD SR 2023-24, V-II, Pg No-132, It No-14.7.1) Each 3174.46 3174.46 2.0 False None None False None False 6348.92 0 3855080 147386 None code133 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm(PWD SR 2023-24, V-II, Pg No-136, It No-14.32.2) Each 1048.54 1048.54 2.0 False None None False None False 2097.08 0 3855081 147386 None code134 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (PWD SR 2023-24, V-II, Pg No-131, It No-14.1.1) Each 5030.52 5030.52 2.0 False None None False None False 10061.04 0 3855082 147386 None code135 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. (PWD SR 2023-24, V-II, Pg No-137, It No-14.40.1) Each 492.34 492.34 2.0 False None None False None False 984.68 0 3855083 147386 None code136 Providing and fixing unplasticised PVC connection pipe with brass unions :15 mm nominal bore (PWD SR 2023-24, V-II, Pg No-118, It No-13.8.1.1) Nos 85.49 85.49 2.0 False None None False None False 170.98 0 3855084 147386 None code137 S.C.I. gully or nahani grating 100 mm dia(PWD SR 2023-24, V-II, Pg No-A-34,It No-735) Nos 32.0 32.0 2.0 False None None False None False 64.0 0 3855085 147386 None code138 Providing and fixing brass bib cock of approved quality 15 mm nominal bore: (PWD SR 2023-24, V-II, Pg No-117, It No-13.2.1) Nos 294.58 294.58 10.0 False None None False None False 2945.8 0 3855086 147386 None code139 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore (PWD SR 2023-24, V-II, Pg No-117, It No-13.5.2) Nos 323.42 323.42 10.0 False None None False None False 3234.2 0 3855087 147386 None code140 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g (PWD SR 2023-24, V-II, Pg No-121, It No-13.24) Nos 170.98 170.98 10.0 False None None False None False 1709.8 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724046749000 1 None None ELIGIBILITY Tenders from Joint ventures are not acceptable None 1724046749000 2 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724046749000 1 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1724046749000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724046749000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1724918020000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the submitted tender bid shall be liable to be rejected None 1724918031000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 50%) as prime contractor at least one such similar work of value not less than Rs, xxxxxxx (50% of estimated cost of tender) None 1724918044000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders as may be modified from time to time None 1724918064000 0 None None ELIGIBILITY The tenderer shall scan original Workdone certificates Turnover Statements and any other documents specified by the employer and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification within one week from the date of Technical bid opening None 1724918077000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever None 1724918094000 0 None None ELIGIBILITY If the quoted bid amount is less than the tendered amount, the difference in amount shall be remitted in the from of FDR DD Bank Guarantee in the name of Executive Engineer DUDC Haveri from any of the Nationalized Banks/Scheduled Banks and shall only be returned/refunded after the Completion of the Defect Liability Period None 1724918109000 0 None None ELIGIBILITY The Tenders/ Bids are invited as per Standard tender Bid Document KW4 The contractor shall attach all the requisite documents as required in the standard bid document. The Bidders shall abide as per the detailed instructions and conditions. contained in standard bid document KW4 None 1724918129000 0 None None ELIGIBILITY The contractors shall collect necessary samples as required & all relevant requisite tests to be got done by the registered firms with consultants with the Third Party None 1724918141000 0 None None ELIGIBILITY The contractor has to make his own arrangements for procurement of all materials required for completion of the work in all respects. The contractor shall use relevant ISI mark materials for the work and also obtain necessary quality control certificates from the authorized quality control authority None 1724918149000 0 None None ELIGIBILITY Tender application amount shall not be refundable None 1724918159000 0 None None ELIGIBILITY The Department is not responsible for any delay caused in accessing the https://kppp.karnataka.gov.in portal None 1724918171000 0 None None ELIGIBILITY The payments for the wok will be made depending upon the availability of funds None 1724918186000 0 None None ELIGIBILITY He Defect liability Period for the work carried out is 730 days (2 years) from DATE OF COMPLETION OF WORK None 1724918199000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weight age of 10% per year to bring them to the price level of the 2024-25 None 1724918209000 0 None None ELIGIBILITY The time period for completion of the work is 12 months None 1724918219000 0 None None ELIGIBILITY The Applicable GST shall be paid separately None 1724918232000 0 None None ELIGIBILITY List of works for which tenders already submitted and List of existing commitments and ongoing work None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Work done Certificates for the work performed as Prime Contractor in the same name on works of similar nature over during the five years specified similar nature of work done Certificate i.e. 2019-20 to 2023-24 Satisfactorily completed, as prime contractor, at least one similar work such as Asphalt work along with RCC Drain Work of value not less than Rs.164.32 lakhs and Building work of value not less than Rs.5.48 Lakhs.(Note- Certificate should be countersigned by the Employer in charge,not below the rank of an Executive Engineer or equivalent). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The work done Certificates for Quantites of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document executed in any one year in the last five yers ie 2019-20 to 2023-24 the following minimum quantities of work,1.Asphlat(BM or DBM or SDBC or BC) 1214.73 Cum,2.PCC/RCC 829.80Cum,3.TMT Steel Reinforcement 36.53 Tonne. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Valid contractor license certificate issued from competent authority in Appropriate Contractor Class Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Availability by owning equipments by ownership 50 percent and on hire or lease 50 percent all relevant valid documents,Hot mix plant req 1no own,Excavator req 2nos 1own/1hire,Tippers req 4nos 2own/2hire,Vibratory Roller req 1no own,Water Tanker req 2no own/hire as mentioned in Kw4 document. Capabilities of Vendor Other createdTs version createdDate modifiedDate documentName None None None None Others -- RC issued by R.T.O. for all applicable vehicles/Sale deed/purchase invoice, hire/lease agreements None None None None Line of Credit i.e.Rs. 101.88 Lakhs 30percent of amount put to tender obtained from Nationalized / Scheduled Banks in Given Pro-forma in the bid document. The LOC not in the Format as per Bid Document Circular No shall be Rejected Refer Kw4 Document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details along with profit and loss statement tallying the Annual turn over Tenderer in his name should have in the five years i.e.2019-2020 to 2023-24,achieved in at least two financial years a minimum financial turnover of Rs 679.18 Lakhs Refer Kw4 Document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Bidder should be upload the balance sheet for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- balance sheet None None None None Bidder should upload IRT sheet for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Bidder should upload Profit and Loss statement for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- profit and loss statements None None None None Valid GST Registration Certificate Others Other createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (A) Existing commitments and on-going works: along with the details in the format as in the bid document Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- On going Works Details None None None None Notary Self Attestation regarding Agreed to Terms and Conditions as per bid documentv kw4 on stamp paper of value not less than Rs.100.00 Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Notary None None None None Notary Affidavit Declaration that the bidder has not been blacklisted on stamp paper of value not less than Rs.100.00 Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Affidavit None None None None Valid PAN Card of the Participating Bidder Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Valid PAN Card None None None None Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person & Designation, Contact Number Office Landline / Mobile, and valid email ID. Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Bidder Details
tenderCriterionDocumentList	documentName optional documentTypeText Work done Certificates for the work performed as Prime Contractor in the same name on works of similar nature over during the five years specified similar nature of work done Certificate i.e. 2019-20 to 2023-24 Satisfactorily completed, as prime contractor, at least one similar work such as Asphalt work along with RCC Drain Work of value not less than Rs.164.32 lakhs and Building work of value not less than Rs.5.48 Lakhs. True Technical Bid The work done Certificates for Quantites of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document executed in any one year in the last five yers ie 2019-20 to 2023-24 the following minimum quantities of work,1.Asphlat BM or DBM or SDBC or BC 1214.73 Cum,2.PCC or RCC 829.80Cum,3.TMT Steel Reinforcement 36.53 Tonne. True Technical Bid Valid contractor license certificate issued from competent authority in Appropriate Contractor Class True Technical Bid Availability by owning equipments by ownership 50 percent and on hire or lease 50 percent all relevant valid documents,Hot mix plant req 1no own,Excavator req 2nos 1own/1hire,Tippers req 4nos 2own/2hire,Vibratory Roller req 1no own,Water Tanker req 2no own/hire as mentioned in Kw4 document. True Technical Bid Line of Credit i.e.Rs. 101.88 Lakhs 30percent of amount put to tender obtained from Nationalized / Scheduled Banks in Given Pro-forma in the bid document. The LOC not in the Format as per Bid Document Circular No shall be Rejected Refer Kw4 Document True Technical Bid Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details along with profit and loss statement tallying the Annual turn over Tenderer in his name should have in the five years i.e.2019-2020 to 2023-24,achieved in at least two financial years a minimum financial turnover of Rs 679.18 Lakhs Refer Kw4 Document True Technical Bid Bidder should be upload the balance sheet for the last five years True Technical Bid Bidder should upload IRT sheet for the last five years True Technical Bid Bidder should upload Profit and Loss statement for the last five years True Technical Bid Valid GST Registration Certificate True Technical Bid The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender.A Existing commitments and on-going works along with the details in the format as in the bid document True Technical Bid Notary Self Attestation regarding Agreed to Terms and Conditions as per bid documentv kw4 on stamp paper of value not less than Rs.100.00 True Technical Bid Notary Affidavit Declaration that the bidder has not been blacklisted on stamp paper of value not less than Rs.100.00 True Technical Bid Valid PAN Card of the Participating Bidder True Technical Bid Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person and Designation, Contact Number Office Landline Mobile, and valid email ID. True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Other Works Haveri Ranibennur Dharwad South RANIBENNUR CMC RANEBENNUR None None None None None None Other Works Haveri Ranibennur Dharwad South RANIBENNUR CMC RANEBENNUR None None None None None None Other Works Haveri Ranibennur Dharwad South RANIBENNUR CMC RANEBENNUR None None None None None None
tenderAddress	createdTs 1725006225000 version 0 createdDate None modifiedDate None blockNumber Office of Executive Engineer , District Urban Development Cell Devagiri Haveri District street None city Haveri state Karnataka pin 581110
tenderRecallDTO	None