createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1724050389418 version 9 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 472000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 03-10-2024 17:00:00 tenderQueryClose 18-09-2024 16:00:00 technicalBidOpen 04-10-2024 17:05:00 publishedDate 03-09-2024 12:48:51 publishedByPost DUDC_EE_HAV publishedByUser KPE12612 - Mattikatti S S bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 31-08-2024 16:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson S S Mattikatti EE splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 8660975885 mobileNumber 9481724539 tenderSupplierList None
tenderSchedule	createdTs 1724050389464 version 6 createdDate None modifiedDate None tenderNumber DMA/2024-25/BD/WORK_INDENT25072 title Construction of Buliding works in Ranebennur CMC under Amruth Nagarotthan Phase 4(317.10Lakhs) description Construction of Buliding works in Ranebennur CMC under Amruth Nagarotthan Phase 4(317.10Lakhs) category WORKS categoryText Works ecv 31436154.58 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2192 locationName DMA District Urban Development Cell Haveri provisionalAmount 31710000.0 groupOverheadTotal 4592512.08 fileNumber DMA/2024-25/ANH-4/Ranebennur/Pkg-3
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1724050389000 1 None None Buildings Construction of Buliding works in Ranebennur CMC under Amruth Nagarotthan Phase 4(317.10Lakhs) 26843642.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3807083 144554 None code01 Clearing Grass and Removal of Rubbish & dumping to outside periphery by manual means(KPWD 2023-24 Vol-03 P.NO:09,I.NO:2.3) 100 Sqm 381.1 381.1 32.48 False None None False None False 12378.128 0 3807084 144554 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (KPWD 2023-24 Vol-01 P.NO:08,I.NO:1.14.1) Cum 105.06 105.06 2428.496 False None None False None False 255137.78976 0 3807085 144554 None code03 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.(KPWD 2023-24 Vol-01 P.NO:15,I.NO:2.1.3) Cum 6168.67 6168.67 161.4505 False None None False None False 995934.855835 0 3807086 144554 None code04 Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and comp (KPWD 2023-24 Vol-03 P.NO:26,I.NO:4.17) Cum 2635.77 2635.77 263.8 False None None False None False 695316.126 0 3807087 144554 None code05 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra)-600 x 300 x 150 mm size(KPWD 2023-24 Vol-03 P.NO:74,I.NO:8.42.3) m 476.89 476.89 1231.0 False None None False None False 587051.59 0 3807088 144554 None code06 Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification)(KPWD 2023-24 Vol-03 P.NO:51,I.NO:6.8.2) Sqm 1195.83 1195.83 1371.8 False None None False None False 1640439.594 0 3807089 144554 None code07 Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces(KPWD 2023-24 Vol-03 P.NO:66,I.NO:8.10) Sqm 112.27 112.27 117.299 False None None False None False 13169.15873 0 3807090 144554 None code08 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Vol-02 P.NO:48,I.NO:8.40) Sqm 118.45 118.45 444.0 False None None False None False 52591.8 0 3807091 144554 None code09 Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m(KPWD 2023-24 Vol-01 P.NO:05,I.NO:1.4.1) Cum 249.26 249.26 4.14 False None None False None False 1031.9364 0 3807092 144554 None code10 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (KPWD 2023-24 Vol-01 P.NO:15,I.NO:2.1.2) Cum 5833.92 5833.92 2.58 False None None False None False 15051.5136 0 3807093 144554 None code11 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (KPWD 2023-24 Vol-01 P.NO:15,I.NO:2.2.1) Cum 6475.61 6475.61 7.74 False None None False None False 50121.2214 0 3807094 144554 None code12 For Centering & Shuttering @5% Cum 323.78 323.78 7.74 False None None False None False 2506.0572 0 3807095 144554 None code13 Supply and fixing of childern Play Equipment Fiero A Swing Shaped structural posts of height 2.31 m are to be schedule HOW DIP Galvanized steel with a 114mm OD and 2.3mm (wall) thickness of the tubing. Plastic Components such as swing seats superthicl plasticj shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 8mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges Nos 120547.0 120547.0 3.0 False None None False None False 361641.0 0 3807096 144554 None code14 Supply and fixing of childern Play Equipment Four Seater Seesaw : SPECIFICATIONS The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 3110 mm length and Dia 114 mm. It consists of 4 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges Nos 101878.0 101878.0 4.0 False None None False None False 407512.0 0 3807097 144554 None code15 Supply and fixing of childern Play Equipment Merry go round - DX : The Merry go round consists of a roundplatform which is made of galvanized steel and has a thickness of 2.5 mm. It is also power coated with the thickness of 2.S mm. It is of Dia 1210 mm. It has 3 inverted “L” shaped handrails which is made of Galvanized steel and of dimensions as 474 mmx 81a mm. It has thickness of Dia 32 mm. The 3 handrails are separated exactly. All the 3 handrails are connected to the Centre with the help of a rod which is also made of Galvanized steel and of Oia 48 mm and height 815 mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges Nos 80788.0 80788.0 3.0 False None None False None False 242364.0 0 3807098 144554 None code16 Supply and fixing of childern Play Equipment Puppy dog Rider / Elephant rider / Horse rider: : HDPE of size 0.83 m x 0.31 m x 0.87 m, Plastic Components (super thick plastic] shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with "color molded" in not "added in". All rotational molding is carried out in state of the art, precision, Li axial roto moulding machines which helps achieve guaranteed uniform wall thickness, seamless joints, accurate process control, one part construction to make it stress free. Specialized connectors such as clamps and couplings are to be cast from aluminium which is pre- treated, and cured, with a bakEd on powder coat finish.The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges Nos 52987.0 52987.0 6.0 False None None False None False 317922.0 0 3807099 144554 None code17 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer- In area of light jungle (KPWD 2023-24 Vol-03 P.NO:09,I.NO:2.5a) 100 Sqm 404.79 404.79 32.4 False None None False None False 13115.196 0 3807100 144554 None code18 Digging of pits: Digging pits size(0.3x0.3x0.3 Cum) a).Ordinary soil Part:III, Sl.no:3 HORTI(20-21) Each 4.46 4.46 150.0 False None None False None False 669.0 0 3807101 144554 None code19 Digging of pits: Digging pits size(0.6x0.6x0.6 Cum) a).Ordinary soil Part:III, Sl.no:3 HORTI(20-21) Each 35.62 35.62 120.0 False None None False None False 4274.4 0 3807102 144554 None code20 Removal of bad soil and stacking besides the pit in ordinary soil. Mixing part of existing soil,sand and manure and refiling 90% of the pit. Digging pits size(0.3x0.3x0.3 Cum) Part:III, Sl.no:4.c HORTI(20-21) Cum 1.72 1.72 150.0 False None None False None False 258.0 0 3807103 144554 None code21 Removal of bad soil and stacking besides the pit in ordinary soil. Mixing part of existing soil,sand and manure and refiling 90% of the pit. Digging pits size(0.6x0.6x0.6 Cum) Part:III, Sl.no:4.c HORTI(20-21) Cum 3.92 3.92 120.0 False None None False None False 470.4 0 3807104 144554 None code22 Giving support with stick with bamboo or equivalent Support material of 1m Height.(Data Rate) Part:III, Sl.no:5 HORTI (20-21) Each 20.0 20.0 270.0 False None None False None False 5400.0 0 3807105 144554 None code23 Transporting the plant till the pit, giving stick support and planting the shrub. Part:III, Sl.no:6 HORTI (20-21) For 100 plants Nos 766.42 766.42 2.7 False None None False None False 2069.334 0 3807106 144554 None code24 Supplying and delivery at site of ornamental and flowering plants/shrubs (Data rate). 1 TO 2 FT Height Bag size: 6" To 8" Each 175.0 175.0 49.0 False None None False None False 8575.0 0 3807107 144554 None code25 Supplying and delivery at site of ornamental and flowering plants/shrubs (Data rate). 2 TO 3 FT Height Bag size: 8" To 10" Each 250.0 250.0 50.0 False None None False None False 12500.0 0 3807108 144554 None code26 Supplying and delivery at site of Special plants/shrubs (Data rate). Each 900.0 900.0 40.0 False None None False None False 36000.0 0 3807109 144554 None code27 Plantation of Ground Covers: C. Cost of Plants (Data rate). Each 225.0 225.0 130.0 False None None False None False 29250.0 0 3807110 144554 None code28 Supply of good quality red earth (Part:IV/Sl.no: I.1, HORTI (20-21) Cum 744.98 744.98 5.19 False None None False None False 3866.4462 0 3807111 144554 None code29 Supply of good quality Manure Part:I/Sl.no:3, HORTI (20-21) Cum 1461.57 1461.57 3.46 False None None False None False 5057.0322 0 3807112 144554 None code30 Maintenance of Landscape Garden area with watering regularly, weeding and Lawn moving should be done regularly once in a fortnight and pruning of plants such as Hedge, Trees, Shrubs, Ground cover and etc., should be carried out as and when required and as per the directions of officer in-charge of work, including cost of all labours and etc., complete. Maintenance area upto 8000.00Sqm (2.00 acres) (Part:X /16.1 HORTI (20-21) Sqm 9.27 9.27 4876.0 False None None False None False 45200.52 0 3807113 144554 None code31 Supplying and fixing of solar Lux level street light control switch three phase including suitable capacity contactor-12 Kw (KPWD ELEC VOL-6,P.NO:21,I.NO:5.50.3) Each 17134.05 17134.05 22.0 False None None False None False 376949.1 0 3807114 144554 None code32 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7116.72 7116.72 3.78 False None None False None False 26901.2016 0 3807115 144554 None code33 1st Floor-Columns-For Centering & Shuttering @70% Cum 4981.7 4981.7 3.78 False None None False None False 18830.826 0 3807116 144554 None code34 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7116.72 7116.72 8.028 False None None False None False 57133.02816 0 3807117 144554 None code35 1st Floor - Lintel Side -For Centering & Shuttering @60% Cum 4270.03 4270.03 8.028 False None None False None False 34279.80084 0 3807118 144554 None code36 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7116.72 7116.72 17.6749 False None None False None False 125787.314328 0 3807119 144554 None code37 1st Floor-Slab-For Centering & Shuttering @50% Cum 3558.36 3558.36 17.6749 False None None False None False 62893.657164 0 3807120 144554 None code38 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(Page No.16. Iitem no.2.5.2 of Vol-1-CSR-KPWD 2023-2024) Cum 7116.72 7116.72 0.4319 False None None False None False 3073.711368 0 3807121 144554 None code39 1st Floor -Chejja-For Centering & Shuttering @45% Cum 3202.52 3202.52 0.4319 False None None False None False 1383.168388 0 3807122 144554 None code40 Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification. (The laps and wastages shall not be measured separately)(Page No.18. Iitem no.2.11a of Vol-1-CSR-KPWD 2023-2024) Tonne 93035.28 93035.28 1.7603 False None None False None False 163770.003384 0 3807123 144554 None code41 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(KPWD 2023-24 Page No.17.Vol-2 I.no.6.32 ) Sqm 1362.4 1362.4 132.0749 False None None False None False 179938.84376 0 3807124 144554 None code42 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.41.Vol-2 I.no.8.4.2) Sqm 324.48 324.48 132.0749 False None None False None False 42855.663552 0 3807125 144554 None code43 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.42.Vol-2 I.no.8.5.2) Sqm 362.96 362.96 135.989 False None None False None False 49358.56744 0 3807126 144554 None code44 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(KPWD 2023-24 Page No.50.Vol-2 I.no.8.51) Sqm 104.0 104.0 132.0749 False None None False None False 13735.7896 0 3807127 144554 None code45 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.48.Vol-2 I.no.8.39) Sqm 132.08 132.08 268.0649 False None None False None False 35406.011992 0 3807128 144554 None code46 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(KPWD 2023-24 Page No.99.Vol-2 I.no-12.11) Cum 143596.96 143596.96 0.3727 False None None False None False 53518.586992 0 3807129 144554 None code47 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(KPWD 2023-24 Page No.105.Vol-2 I.no-12.57.1) Sqm 4204.72 4204.72 15.12 False None None False None False 63575.3664 0 3807130 144554 None code48 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x40x2.5 mm (ordinary type)(KPWD 2023-24 Page No.107.Vol-2 I.no-12.75.6) Nos 106.08 106.08 18.0 False None None False None False 1909.44 0 3807131 144554 None code49 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.2) Each 364.0 364.0 18.0 False None None False None False 6552.0 0 3807132 144554 None code50 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.4) Each 204.88 204.88 18.0 False None None False None False 3687.84 0 3807133 144554 None code51 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.61) Each 1029.6 1029.6 6.0 False None None False None False 6177.6 0 3807134 144554 None code52 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.60) Nos 1094.08 1094.08 6.0 False None None False None False 6564.48 0 3807135 144554 None code53 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.62) Nos 246.48 246.48 6.0 False None None False None False 1478.88 0 3807136 144554 None code54 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.59) Nos 1158.56 1158.56 6.0 False None None False None False 6951.36 0 3807137 144554 None code55 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.58) Nos 124.8 124.8 6.0 False None None False None False 748.8 0 3807138 144554 None code56 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(KPWD 2023-24 Page No.104.Vol-2 I.no-12.51) Nos 1056.64 1056.64 6.0 False None None False None False 6339.84 0 3807139 144554 None code57 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(KPWD 2023-24 Page No.86.Vol-2 I.no-11.34A) Kg 174.72 174.72 161.999 False None None False None False 28304.46528 0 3807140 144554 None code58 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.110.Vol-2 I.no-12.90) Sqm 7003.36 7003.36 10.7999 False None None False None False 75635.587664 0 3807141 144554 None code59 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.47.Vol-2 I.no-8.34.2) Sqm 60.32 60.32 15.12 False None None False None False 912.0384 0 3807142 144554 None code60 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.46.Vol-2 I.no-8.33.2) Sqm 143.52 143.52 15.12 False None None False None False 2170.0224 0 3807143 144554 None code61 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.48.Vol-2 I.no-8.37) Sqm 136.24 136.24 10.7999 False None None False None False 1471.378376 0 3807144 144554 None code62 Concealed Conduit System-Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary-25 mm dia 2 mm thick(KPWD Elec 2023-24 Vol-06,P.NO:02,I.NO:1.2.2) Mtr 80.34 80.34 70.0 False None None False None False 5623.8 0 3807145 144554 None code63 Concealed Conduit System-Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary-32 mm dia 2.5 mm thick (KPWD Elec 2023-24 Vol-06,P.NO:02,I.NO:1.2.3) Mtr 106.09 106.09 1070.0 False None None False None False 113516.3 0 3807146 144554 None code64 Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep Junction box (KPWD Elec 2023-24 Vol-06,P.NO:02,I.NO:1.5.3) Each 62.83 62.83 78.0 False None None False None False 4900.74 0 3807147 144554 None code65 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit in brick wall(KPWD Elec 2023-24 Vol-06,P.NO:03,I.NO:1.7.1) m 29.87 29.87 1025.0 False None None False None False 30616.75 0 3807148 144554 None code66 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other ppurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.1.6) Cum 6430.29 6430.29 9.36 False None None False None False 60187.5144 0 3807149 144554 None code67 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.4.2) Cum 6512.69 6512.69 17.28 False None None False None False 112539.2832 0 3807150 144554 None code68 For Centering & Shuttering @35% Cum 2279.44 2279.44 17.28 False None None False None False 39388.7232 0 3807151 144554 None code69 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11H) Tonne 81381.33 81381.33 1.1988 False None None False None False 97559.938404 0 3807152 144554 None code70 Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.(PWD SR 2023-24 Vol:03 P.NO.17 I.No.3.7) Cum 108.15 108.15 81.0 False None None False None False 8760.15 0 3807153 144554 None code71 Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge-In cement mortar (KPWD 2023-24 VOL.02 P.No-187 I.NO:19.7.3) Cum 1059.87 1059.87 54.924 False None None False None False 58212.29988 0 3807154 144554 None code72 Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge(KPWD 2023-24 VOL.02 P.No-187 I.NO:19.3) Cum 2498.78 2498.78 18.42 False None None False None False 46027.5276 0 3807155 144554 None code73 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. (KPWD 2023-24 VOL.01 P.No-05 I.NO:1.1) Sqm 93.73 93.73 1208.86 False None None False None False 113306.4478 0 3807156 144554 None code74 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth (KPWD 2023-24 VOL.01 P.No-08 I.NO:1.15.1) Cum 373.89 373.89 15.5519 False None None False None False 5814.699891 0 3807157 144554 None code75 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(KPWD 2023-24 Page No.07.Vol-1 I.no.1.9) Cum 273.98 273.98 124.4159 False None None False None False 34087.468282 0 3807158 144554 None code76 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.(KPWD 2023-24 Page No.06.Vol-2 I.no.4.1) Sqm 121.54 121.54 607.56 False None None False None False 73842.8424 0 3807159 144554 None code77 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(PWD SR 2023-24 Vol:2 P.NO.09 I.No.5.4) Cum 6580.67 6580.67 103.464 False None None False None False 680862.44088 0 3807160 144554 None code78 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.2.3) Cum 6526.08 6526.08 41.472 False None None False None False 270649.58976 0 3807161 144554 None code79 Footings-For Centering & Shuttering @8% Cum 522.08 522.08 41.472 False None None False None False 21651.70176 0 3807162 144554 None code80 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.2.3) Cum 6526.08 6526.08 7.2899 False None None False None False 47574.470592 0 3807163 144554 None code81 Pedastals-For Centering & Shuttering @5% Cum 326.3 326.3 7.2899 False None None False None False 2378.69437 0 3807164 144554 None code82 Providing and laying in cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.3.2) Cum 6674.4 6674.4 101.088 False None None False None False 674701.7472 0 3807165 144554 None code83 Plinth Beam-For Centering & Shuttering @50% Cum 3337.2 3337.2 101.088 False None None False None False 337350.8736 0 3807166 144554 None code84 Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.(PWD SR 2023-24 Vol:1 P.NO.15 I.No.2.2.3) Cum 6526.08 6526.08 7.2899 False None None False None False 47574.470592 0 3807167 144554 None code85 Columns Below Plinth-For Centering & Shuttering @70% Cum 4568.26 4568.26 7.289 False None None False None False 33298.04714 0 3807168 144554 None code86 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.5.2) Cum 7048.29 7048.29 13.608 False None None False None False 95913.13032 0 3807169 144554 None code87 Columns Above Plinth-For Centering & Shuttering @70% Cum 4933.8 4933.8 13.608 False None None False None False 67139.1504 0 3807170 144554 None code88 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.5.2) Cum 7048.29 7048.29 51.3888 False None None False None False 362203.165152 0 3807171 144554 None code89 Ground Floor - Lintel Side-For Centering & Shuttering @60% Cum 4228.97 4228.97 51.3888 False None None False None False 217321.693536 0 3807172 144554 None code90 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.5.2) Cum 7048.29 7048.29 137.826 False None None False None False 971437.61754 0 3807173 144554 None code91 Ground Floor Slab-For Centering & Shuttering @50% Cum 3524.14 3524.14 137.826 False None None False None False 485718.11964 0 3807174 144554 None code92 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(PWD SR 2023-24 Vol:1 P.NO.16 I.No.2.5.2) Cum 7048.29 7048.29 4.3199 False None None False None False 30447.907971 0 3807175 144554 None code93 Groun Floor -Chejja-For Centering & Shuttering @45% Cum 3171.73 3171.73 4.3199 False None None False None False 13701.556427 0 3807176 144554 None code94 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification-Buildings-(PWD SR 2023-24 Vol:1 P.NO.18 I.No.2.11A) Tonne 92140.71 92140.71 28.513 False None None False None False 2627208.06423 0 3807177 144554 None code95 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(KPWD 2023-24 Page No.17.Vol-2 I.no.6.32 ) Sqm 1349.3 1349.3 1023.12 False None None False None False 1380495.816 0 3807178 144554 None code96 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications(KPWD 2023-24 Page No.17.Vol-2 I.no.6.33 ) Sqm 1267.93 1267.93 309.6 False None None False None False 392551.128 0 3807179 144554 None code97 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.41.Vol-2 I.no.8.4.2) Sqm 321.36 321.36 1845.96 False None None False None False 593217.7056 0 3807180 144554 None code98 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.42.Vol-2 I.no.8.5.2) Sqm 359.47 359.47 896.399 False None None False None False 322228.54853 0 3807181 144554 None code99 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab Black, Cat Eye, River Pink or equivalent.(KPWD 2023-24 Page No.63.Vol-2 I.no.9.24) Sqm 2937.56 2937.56 504.864 False None None False None False 1483068.29184 0 3807182 144554 None code100 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile)(KPWD 2023-24 Page No.60.Vol-2 I.no.9.7.2) Sqm 1297.8 1297.8 1009.728 False None None False None False 1310424.9984 0 3807183 144554 None code101 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.(KPWD 2023-24 Page No.64.Vol-2 I.no.9.30) Sqm 5487.84 5487.84 41.4 False None None False None False 227196.576 0 3807184 144554 None code102 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete.(KPWD 2023-24 Page No.60.Vol-2 I.no.9.9) Sqm 1108.28 1108.28 60.48 False None None False None False 67028.7744 0 3807185 144554 None code103 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.45.Vol-2 I.no.8.29) Sqm 291.49 291.49 896.3999 False None None False None False 261291.606851 0 3807186 144554 None code104 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(KPWD 2023-24 Page No.50.Vol-2 I.no.8.51) Sqm 103.0 103.0 1845.96 False None None False None False 190133.88 0 3807187 144554 None code105 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.48.Vol-2 I.no.8.39) Sqm 130.81 130.81 1845.96 False None None False None False 241470.0276 0 3807188 144554 None code106 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(KPWD 2023-24 Page No.99.Vol-2 I.no-12.11) Cum 142216.22 142216.22 2.7446 False None None False None False 390326.637412 0 3807189 144554 None code107 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 30 mm thick Both side teak(KPWD 2023-24 Page No.105.Vol-2 I.no-12.57.1) Sqm 4164.29 4164.29 94.5 False None None False None False 393525.405 0 3807190 144554 None code108 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x40x2.5 mm (ordinary type)(KPWD 2023-24 Page No.107.Vol-2 I.no-12.75.6) Nos 105.06 105.06 144.0 False None None False None False 15128.64 0 3807191 144554 None code109 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.2) Each 360.5 360.5 144.0 False None None False None False 51912.0 0 3807192 144554 None code110 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :100x10mm(KPWD 2023-24 Page No.107.Vol-2 I.no-12.76.4) Each 202.91 202.91 144.0 False None None False None False 29219.04 0 3807193 144554 None code111 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.61) No 1019.7 1019.7 48.0 False None None False None False 48945.6 0 3807194 144554 None code112 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.60) Nos 1083.56 1083.56 48.0 False None None False None False 52010.88 0 3807195 144554 None code113 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.62) Nos 244.11 244.11 48.0 False None None False None False 11717.28 0 3807196 144554 None code114 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.59) Nos 1147.42 1147.42 48.0 False None None False None False 55076.16 0 3807197 144554 None code115 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.(KPWD 2023-24 Page No.105.Vol-2 I.no-12.58) Nos 123.6 123.6 48.0 False None None False None False 5932.8 0 3807198 144554 None code116 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(KPWD 2023-24 Page No.104.Vol-2 I.no-12.51) Nos 1046.48 1046.48 12.0 False None None False None False 12557.76 0 3807199 144554 None code117 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding(KPWD 2023-24 Page No.86.Vol-2 I.no-11.34A) Kg 173.04 173.04 5270.4 False None None False None False 911990.016 0 3807200 144554 None code118 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.110.Vol-2 I.no-12.90) Sqm 6936.02 6936.02 157.679 False None None False None False 1093664.69758 0 3807201 144554 None code119 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)(KPWD 2023-24 Page No.109.Vol-2 I.no-12.85) Sqm 5890.57 5890.57 4.3199 False None None False None False 25446.673343 0 3807202 144554 None code120 Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(KPWD 2023-24 Page No.47.Vol-2 I.no-8.34.2) Sqm 59.74 59.74 94.5 False None None False None False 5645.43 0 3807203 144554 None code121 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.46.Vol-2 I.no-8.33.2) Sqm 142.14 142.14 94.5 False None None False None False 13432.23 0 3807204 144554 None code122 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(KPWD 2023-24 Page No.48.Vol-2 I.no-8.37) Sqm 134.93 134.93 292.79 False None None False None False 39506.1547 0 3807205 144554 None code123 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as(KPWD 2023-24 Page No.85.Vol-2 I.no-11.28) Kg 581.95 581.95 270.0 False None None False None False 157126.5 0 3807206 144554 None code124 Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3).(PWD SR 2023-24 Vol:3 P.NO.5 I.No.1.1A) Cum 139.05 139.05 1595.548 False None None False None False 221860.9494 0 3807207 144554 None code125 Concealed Conduit System-Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary-19/20 mm dia 2 mm thick(KPWD ELE 2023-24 Vol 06 P.no:02 I.no : 1.2.1) Mtr 67.98 67.98 1000.0 False None None False None False 67980.0 0 3807208 144554 None code126 Supplying And Fixing Metal Fan Box with Round Hook.(KPWD ELE 2023-24 Vol 06 P.no:04 I.no : 1.13) No 120.51 120.51 12.0 False None None False None False 1446.12 0 3807209 144554 None code127 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-6 Way(KPWD ELE 2023-24 Vol 06 P.no:08 I.no : 3.4.4) Each 226.6 226.6 48.0 False None None False None False 10876.8 0 3807210 144554 None code128 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-8 Way(KPWD ELE 2023-24 Vol 06 P.no:08 I.no : 3.4.5) Each 268.83 268.83 36.0 False None None False None False 9677.88 0 3807211 144554 None code129 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010-1.5 mm2(KPWD ELE 2023-24 Vol 06 P.no:05 I.no :2.3.2) Mtr 26.78 26.78 1440.0 False None None False None False 38563.2 0 3807212 144554 None code130 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010-2.5 mm2(KPWD ELE 2023-24 Vol 06 P.no:05 I.no :2.3.3) Mtr 43.26 43.26 600.0 False None None False None False 25956.0 0 3807213 144554 None code131 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:2010- 6 mm2(KPWD ELE 2023-24 Vol 06 P.no:05 I.no :2.3.5) Mtr 94.76 94.76 600.0 False None None False None False 56856.0 0 3807214 144554 None code132 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box-6 Module(KPWD ELE 2023-24 Vol 06 P.no:08 I.no :3.5.4) Each 241.02 241.02 60.0 False None None False None False 14461.2 0 3807215 144554 None code133 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box-8 Module(KPWD ELE 2023-24 Vol 06 P.no:08 I.no :3.5.5) Each 292.52 292.52 36.0 False None None False None False 10530.72 0 3807216 144554 None code134 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-6A One Way Switch (KPWD ELE 2023-24 Vol 06 P.no:09 I.no :3.6.1) Each 105.06 105.06 36.0 False None None False None False 3782.16 0 3807217 144554 None code135 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-Stepped Fan Regulator Two Module (KPWD ELE 2023-24 Vol 06 P.no:09 I.no :3.6.4) Each 367.71 367.71 12.0 False None None False None False 4412.52 0 3807218 144554 None code136 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-16A One Way Switch (KPWD ELE 2023-24 Vol 06 P.no:09 I.no :3.6.7) Each 185.4 185.4 12.0 False None None False None False 2224.8 0 3807219 144554 None code137 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-32A DP Switch (KPWD ELE 2023-24 Vol 06 P.no:09 I.no :3.6.9) Each 335.78 335.78 12.0 False None None False None False 4029.36 0 3807220 144554 None code138 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-6/16A Universal Socket (KPWD ELE 2023-24 Vol 06 P.no:09 I.no :3.6.10) Each 243.08 243.08 12.0 False None None False None False 2916.96 0 3807221 144554 None code139 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-RJ45/I.O Outlet Cat-6 (KPWD ELE 2023-24 Vol 06 P.no:09 I.no :3.6.12) Each 347.11 347.11 12.0 False None None False None False 4165.32 0 3807222 144554 None code140 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.-LED light fitting 1 x 2' - 9/10 W(KPWD ELE 2023-24 Vol 06 P.no:43 I.no :11.3.1) Each 567.53 567.53 24.0 False None None False None False 13620.72 0 3807223 144554 None code141 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.-LED light fitting 1 x 4' - 20/22 W(KPWD ELE 2023-24 Vol 06 P.no:43 I.no :11.3.2) Each 710.7 710.7 24.0 False None None False None False 17056.8 0 3807224 144554 None code142 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans)-48" Sweep 5 Star (1200 mm) (KPWD ELE 2023-24 Vol 06 P.no:30 I.no :6.4.1) Each 2757.31 2757.31 12.0 False None None False None False 33087.72 0 3807225 144554 None code143 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. (KPWD ELE 2023-24 Vol 06 P.no:57 I.no :13.10) Each 176.13 176.13 12.0 False None None False None False 2113.56 0 3807226 144554 None code144 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.-6-32 A SP(KPWD ELE 2023-24 Vol 06 P.no:07 I.no :5.18.1) Each 427.45 427.45 24.0 False None None False None False 10258.8 0 3807227 144554 None code145 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.-6-32 A TPN (KPWD ELE 2023-24 Vol 06 P.no:17 I.no :5.18.7) Each 1768.51 1768.51 24.0 False None None False None False 42444.24 0 3807228 144554 None code146 Supplying, fixing and wiring Residual current circuit breaker (RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board.-32-40A 4 pole(KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.20.8) Each 5301.41 5301.41 12.0 False None None False None False 63616.92 0 3807229 144554 None code147 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure.II - Double Door-12 Way SP & N( -KPWD - Elec Vol-VI, 2023-2024: Page No.18, Item No. 5.19.9) Each 2398.87 2398.87 12.0 False None None False None False 28786.44 0 3807230 144554 None code148 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete-14 SWG(KPWD -Elec Vol-VI, 2023-2024: Page No.20, Item No. 5.42.1) Sq CM 0.52 0.52 72000.0 False None None False None False 37440.0 0 3807231 144554 None code149 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release,Micro processor release shall have Earth Fault as per IS/IEC 60947-2 .(Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulationbetween front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.-FOUR Pole-320-400 A 50 kA (KPWD -Elec Vol-VI, 2023-2024: Page No.17, Item No. 5.15.17) Each 31014.33 31014.33 12.0 False None None False None False 372171.96 0 3807232 144554 None code150 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete - 400 A 4 x 50 x 10 mm Aluminium Strips(KPWD -Elec Vol-VI, 2023-2024: Page No.20, Item No. 5.40.3) Mtr 4578.35 4578.35 12.0 False None None False None False 54940.2 0 3807233 144554 None code151 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (KPWD -Elec Vol-VI, 2023-2024: Page No.13, Item No. 205-32.09) Km 158683.86 158683.86 0.18 False None None False None False 28563.0948 0 3807234 144554 None code152 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall- 25 mm nominal dia Pipes(KPWD 2023-24 VOL-02,P.NO:122,I.NO:13.31.3) m 327.54 327.54 276.0 False None None False None False 90401.04 0 3807235 144554 None code153 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall- 40 mm nominal dia Pipes(KPWD 2023-24 VOL-02,P.NO:122,I.NO:13.31.5) m 552.08 552.08 180.0 False None None False None False 99374.4 0 3807236 144554 None code154 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter (KPWD 2023-24 VOL-02,P.NO:125,I.NO:13.48) m 299.73 299.73 120.0 False None None False None False 35967.6 0 3807237 144554 None code155 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (KPWD 2023-24 VOL-02,P.NO:123,I.NO:13.34) l 9.27 9.27 12000.0 False None None False None False 111240.0 0 3807238 144554 None code156 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (KPWD 2023-24 VOL-02,P.NO:131,I.NO:14.1.1) Each 5030.52 5030.52 12.0 False None None False None False 60366.24 0 3807239 144554 None code157 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (KPWD 2023-24 VOL-02,P.NO:131,I.NO:14.3.1) Each 6156.31 6156.31 12.0 False None None False None False 73875.72 0 3807240 144554 None code158 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern (KPWD 2023-24 VOL-02,P.NO:131,I.NO:14.4.1) Each 4587.62 4587.62 12.0 False None None False None False 55051.44 0 3807241 144554 None code159 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers (KPWD 2023-24 VOL-02,P.NO:133,I.NO:14.7.8) Each 4236.39 4236.39 12.0 False None None False None False 50836.68 0 3807242 144554 None code160 Nahani Trap 10cms x 10cms (KPWD 2023-24 VOL-02,P.NO:A-28,I.NO:547) No 148.0 148.0 24.0 False None None False None False 3552.0 0 3807243 144554 None code161 Providing and fixing brass bib cock of approved quality :20 mm nominal bore(KPWD 2023-24 VOL-02,P.NO:117,I.NO:13.2.2) No 314.15 314.15 12.0 False None None False None False 3769.8 0 3807244 144554 None code162 Providing and fixing brass stop cock of approved quality :20 mm nominal bore(KPWD 2023-24 VOL-02,P.NO:117,I.NO:13.3.2) No 314.15 314.15 12.0 False None None False None False 3769.8 0 3807245 144554 None code163 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.-1x3x2.5 Sqm (KPWD 2023-24 VOL-05,P.NO:154,I.NO:13.22.2) m 87.55 87.55 144.0 False None None False None False 12607.2 0 3807246 144554 None code164 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.-2 HP, Size 50x40 Head 22M, Discharge 186 LPM (KPWD 2023-24 VOL-05,P.NO:157,I.NO:13.40.2) Each 17502.79 17502.79 12.0 False None None False None False 210033.48 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1724050390000 1 None None ELIGIBILITY Tenders from Joint ventures are not acceptable None 1724050390000 2 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1724050390000 2 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the submitted tender bid shall be liable to be rejected None 1724050390000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1724050390000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1724925167000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 50%) as prime contractor at least one such similar work of value not less than Rs, xxxxxxx (50% of estimated cost of tender) None 1724925184000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders as may be modified from time to time None 1724925202000 0 None None ELIGIBILITY The tenderer shall scan original Workdone certificates Turnover Statements and any other documents specified by the employer and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification within one week from the date of Technical bid opening None 1724925215000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever None 1724925228000 0 None None ELIGIBILITY If the quoted bid amount is less than the tendered amount, the difference in amount shall be remitted in the from of FDR DD Bank Guarantee in the name of Executive Engineer DUDC Haveri from any of the Nationalized Banks/Scheduled Banks and shall only be returned/refunded after the Completion of the Defect Liability Period None 1724925240000 0 None None ELIGIBILITY The Tenders/ Bids are invited as per Standard tender Bid Document KW4 The contractor shall attach all the requisite documents as required in the standard bid document. The Bidders shall abide as per the detailed instructions and conditions. contained in standard bid document KW4 None 1724925252000 0 None None ELIGIBILITY The contractors shall collect necessary samples as required & all relevant requisite tests to be got done by the registered firms with consultants with the Third Party None 1724925266000 0 None None ELIGIBILITY The contractor has to make his own arrangements for procurement of all materials required for completion of the work in all respects. The contractor shall use relevant ISI mark materials for the work and also obtain necessary quality control certificates from the authorized quality control authority None 1724925275000 0 None None ELIGIBILITY Tender application amount shall not be refundable None 1724925290000 0 None None ELIGIBILITY The Department is not responsible for any delay caused in accessing the https://kppp.karnataka.gov.in portal None 1724925305000 0 None None ELIGIBILITY The payments for the wok will be made depending upon the availability of funds None 1724925318000 0 None None ELIGIBILITY He Defect liability Period for the work carried out is 730 days (2 years) from DATE OF COMPLETION OF WORK None 1724925330000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weight age of 10% per year to bring them to the price level of the 2024-25 None 1724925348000 0 None None ELIGIBILITY The time period for completion of the work is 12 months None 1724925357000 0 None None ELIGIBILITY The Applicable GST shall be paid separately None 1724925366000 0 None None ELIGIBILITY List of works for which tenders already submitted and List of existing commitments and ongoing work None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Work done Certificates for the work performed as Prime Contractor in the same name on works of similar nature over during the five years specified similar nature of work done Certificate i.e. 2019-20 to 2023-24 Satisfactorily completed, as prime contractor, at least one similar work such as Building work of value not less than Rs.134.22 Lakhs.(Note- Certificate should be countersigned by the Employer in charge,not below the rank of an Executive Engineer or equivalent) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The work done Certificates for Quantites of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document ,the following minimum quantities of work,PCCorRCC 467.89Cum, Flooringorskrirtingordadoing 1244.79Sqm,TMT Steel Reinforcement 25.18Tonne, Solid Block 1171.84 Sqm or BBM 269.53 Cum, Cement Concrete Paver Blocks 1097.44Sqm, UPVCor Aluminum Doors,Windows,Ventilators 138.24Sqm,MS Grills or Steel Railings 4561.92KG,Plastering 2408.34Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs. 6.53 Lakhs in any one year Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- electrical license None None None None Valid contractor license certificate issued from competent authority in Appropriate Contractor Class Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None The Tenderer or his identified sub-contractor should possess required valid license for executing water supply or sanitary engineering works and should have executed similar water supply or sanitary engineering works totaling Rs. 4.05 Lakhs in any one year Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- water supply or sanitary engineering license None None None None Availability by owning equipments by ownership 50 percent and on hire or lease 50 percent all relevant valid documents,Excavator req 2nos 1own/1hire,RMC req 1nos 1hire,Self-Loading Concrete mixer req 2nos 1own/1hire ,Water Tanker req 2nos 1own/1hire as mentioned in Kw4 document. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- RC issued by R.T.O. for all applicable vehicles/Sale deed/purchase invoice, hire/lease agreements None None None None Line of Credit i.e.Rs. 80.53 Lakhs 30percent of amount put to tender obtained from Nationalized / Scheduled Banks in Given Pro-forma in the bid document. The LOC not in the Format as per Bid Document Circular No shall be Rejected Refer Kw4 Document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details along with profit and loss statement tallying the Annual turn over Tenderer in his name should have in the five years i.e.2019-2020 to 2023-24,achieved in at least two financial years a minimum financial turnover of Rs 536.87Lakhs Refer Kw4 Document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Bidder should be upload the balance sheet for the last fve years Financial Status Other createdTs version createdDate modifiedDate documentName None None None None Others -- balance sheet None None None None Bidder should upload ITR sheet for the last five years Financial Status Other createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None Bidder should upload Profit and Loss statement for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- profit and loss statements None None None None Valid GST Registration Certificate Others Other createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender.A.Existing commitments and on-going works along with the details in the format as in the bid document Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- On going Works Details None None None None Valid PAN Card of the Participating Bidder Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Valid PAN Card None None None None Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person and Designation, Contact Number Office Landline Mobile, and valid email ID. Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Bidder Details None None None None Notary Self Attestation regarding Agreed to Terms and Conditions as per bid documentv kw4 on stamp paper of value not less than Rs.100.00 Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Notary None None None None Notary Affidavit Declaration that the bidder has not been blacklisted on stamp paper of value not less than Rs.100.00 Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Affidavit
tenderCriterionDocumentList	documentName optional documentTypeText Work done Certificates for the work performed as Prime Contractor in the same name on works of similar nature over during the five years specified similar nature of work done Certificate i.e. 2019-20 to 2023-24 Satisfactorily completed, as prime contractor, at least one similar work such as Building work of value not less than Rs.134.22 Lakhs. True Technical Bid The work done Certificates for Quantites of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document,PCCorRCC 467.89Cum, Flooringorskrirtingordadoing 1244.79Sqm,TMT Steel Reinforcement 25.18Tonne, Solid Block 1171.84Sqm or BBM 269.53Cum, Cement Concrete Paver Blocks 1097.44Sqm, UPVCor Aluminum Doors,Windows,Ventilators 138.24Sqm,MS Grills or Steel Railings 4561.92KG,Plastering 2408.34Sqm True Technical Bid The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs. 6.53 Lakhs in any one year True Technical Bid Valid contractor license certificate issued from competent authority in Appropriate Contractor Class True Technical Bid The Tenderer or his identified sub-contractor should possess required valid license for executing water supply or sanitary engineering works and should have executed similar water supply or sanitary engineering works totaling Rs. 4.05 Lakhs in any one year True Technical Bid Availability by owning equipments by ownership 50 percent and on hire or lease 50 percent all relevant valid documents,Excavator req 2nos 1own/1hire,RMC req 1nos 1hire,Self-Loading Concrete mixer req 2nos 1own/1hire ,Water Tanker req 2nos 1own/1hire as mentioned in Kw4 document. True Technical Bid Line of Credit i.e.Rs. 80.53 Lakhs 30percent of amount put to tender obtained from Nationalized / Scheduled Banks in Given Pro-forma in the bid document. The LOC not in the Format as per Bid Document Circular No shall be Rejected Refer Kw4 Document True Technical Bid Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details along with profit and loss statement tallying the Annual turn over Tenderer in his name should have in the five years i.e.2019-2020 to 2023-24,achieved in at least two financial years a minimum financial turnover of Rs 536.87Lakhs Refer Kw4 Document True Technical Bid Bidder should be upload the balance sheet for the last fve years True Technical Bid Bidder should upload ITR sheet for the last five years True Technical Bid Bidder should upload Profit and Loss statement for the last five years True Technical Bid Valid GST Registration Certificate True Technical Bid The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender.A.Existing commitments and on-going works along with the details in the format as in the bid document True Technical Bid Valid PAN Card of the Participating Bidder True Technical Bid Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person and Designation, Contact Number Office Landline Mobile, and valid email ID. True Technical Bid Notary Self Attestation regarding Agreed to Terms and Conditions as per bid documentv kw4 on stamp paper of value not less than Rs.100.00 True Technical Bid Notary Affidavit Declaration that the bidder has not been blacklisted on stamp paper of value not less than Rs.100.00 True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Haveri Ranibennur Dharwad South RANIBENNUR CMC RANENENNUR None None None None None None
tenderAddress	createdTs 1725006520000 version 0 createdDate None modifiedDate None blockNumber Office of Executive Engineer , District Urban Development Cell Devagiri Haveri District street None city Haveri state Karnataka pin 581110
tenderRecallDTO	None