| 1725003812000 | 0 | None | None | Buildings | Construction of Compound wall at Moodbidre KICM. | 4699999.56 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3884357 | 149222 | None | work01 | Earth work excavation for foundation of Builings,pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. (I.No:1.6.1, Pg.No:6) | Cum | 542.08 | 542.08 | 221.54 | False | None | None | False | None | False | 120092.4032 | 0 | | 3884358 | 149222 | None | work02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates (I.No:2.1.2, Pg.No:15) | Cum | 6343.68 | 6343.68 | 30.59 | False | None | None | False | None | False | 194053.1712 | 0 | | 3884359 | 149222 | None | work03 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
(Pg.No:15,I.No:2.2.1)(Formwork included) | Cum | 7604.75 | 7604.75 | 57.02 | False | None | None | False | None | False | 433622.845 | 0 | | 3884360 | 149222 | None | work04 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 12038.99 | 12038.99 | 20.0 | False | None | None | False | None | False | 240779.8 | 0 | | 3884361 | 149222 | None | work05 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (Pg.No:15, I.No:2.1.4) | Cum | 6963.04 | 6963.04 | 14.37 | False | None | None | False | None | False | 100058.8848 | 0 | | 3884362 | 149222 | None | work06 | Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (laterite stone msonary) (Pg.No:9,I.No:5.2) | Cum | 7412.16 | 7412.16 | 233.85 | False | None | None | False | None | False | 1733333.616 | 0 | | 3884363 | 149222 | None | work07 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. | Tonne | 88492.32 | 88492.32 | 5.02 | False | None | None | False | None | False | 444231.4464 | 0 | | 3884364 | 149222 | None | work08 | cutting of trees, girth from 600 mm to 900mm including cutting of trunks and branches andremoval upto a lead of 100mtr | Each | 1134.1 | 1134.1 | 150.0 | False | None | None | False | None | False | 170115.0 | 0 | | 3884365 | 149222 | None | work09 | Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. (P.No:95, I.No:11.57.1) | Rmtr | 20.16 | 20.16 | 1965.0 | False | None | None | False | None | False | 39614.4 | 0 | | 3884366 | 149222 | None | work10 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (P.No:85, i.No:11.34A) | Kg | 188.16 | 188.16 | 950.0 | False | None | None | False | None | False | 178752.0 | 0 | | 3884367 | 149222 | None | work11 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (P.No:42, I.No:8.9) | Sqm | 431.2 | 431.2 | 990.6 | False | None | None | False | None | False | 427146.72 | 0 | | 3884368 | 149222 | None | work12 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(P.No:46, I.No:8.30) | Sqm | 194.88 | 194.88 | 991.86 | False | None | None | False | None | False | 193293.6768 | 0 | | 3884369 | 149222 | None | work13 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7081.76 | 7081.76 | 60.0 | False | None | None | False | None | False | 424905.6 | 0 |
|